Performance Energética no contexto do sistema LEED

Com o aumento constante de procura de recursos naturais por parte dos vários setores da sociedade é urgente encontrar soluções para reduzir o seu consumo sem se travar a expansão demográfica que se tem vindo a sentir nos grandes centros urbanos. É através da implementação de medidas de sustentabilidade e pelo aumento da eficiência de utilização desses recursos que se tem vindo a combater esta tendência cada vez maior de consumismo global, sendo isto apenas possível com a implementação de ferramentas tecnológicas avançadas que permitem estabelecer limites ao considerado eficiente e premiando, em termos financeiros e de imagem de marketing, as entidades que o alcancem. O LEED é um sistema de certificação de sustentabilidade voluntário de edifícios residenciais e comerciais que estabelece métricas de comparação de parâmetros indicadores de consumos energéticos, hídricos e de materiais em todo o ciclo de vida do edifício e que tem vindo a ganhar destaque em crescendo a nível mundial. Esta dissertação teve como objetivo comparar a performance de consumo energético no âmbito do sistema LEED com a do sistema de certificação energética de edifícios nacional (SCE) de um grande edifício de serviços, estabelecendo um paralelismo de semelhanças e diferenças entre os dois e de avaliar os efeitos de potenciais medidas de eficiência energética e seus efeitos nas classificações de mérito obtidas em cada sistema. Os resultados obtidos na simulação que permitiu avaliar a performance foi muito satisfatório, tendo sido aproveitado pela empresa para efeitos de certificação LEED do edifício em estudo.

Construção das capacidades organizacionais de tecnologia da informação no contexto dos sistemas institucionais integrados de gestão da UFRN

The IT capability is a organizational ability to perform activities of this role more effectively and an important mechanism in creating value. Its building process (stages of creation and development) occurs through management initiatives for improvement in the performance of their activities, using human resources and IT assets complementary responsible for the evolution of their organizational routines. This research deals with the IT capabilities related to SIG (integrated institutional management systems), built and deployed in UFRN (Universidade Federal do Rio Grande do Norte) to realization and control of administrative, academic and human resources activities. Since 2009, through cooperative agreements with federal and educational institutions of direct administration, UFRN has supported the implementation of these systems, currently involving more than 30 institutions. The present study aims to understand how IT capabilities, relevant in the design, implementation and dissemination of SIG, were built over time. This is a single case study of qualitative and longitudinal nature, performed by capturing, coding and analysis from secondary data and from semi-structured interviews conducted primarily with members of Superintenência de Informática, organizational unit responsible for SIG systems in UFRN. As a result, the technical, of internal relationship and external cooperation capabilities were identified as relevant in the successful trajectory of SIG systems, which have evolved in different ways. The technical capacity, initiated in 2004, toured the stages of creation and development until it reached the stage of stability in 2013, due to technological limits. Regarding the internal relationship capability, begun in 2006, it toured the stages of creation and development, having extended its scope of activities in 2009, being in development since then. Unlike the standard life cycle observed in the literature, the external cooperation capability was initiated by an intensity of initiatives and developments in the routines in 2009, which were decreasing to cease in 2013 in order to stabilize the technological infrastructure already created for cooperative institutions. It was still identified the start of cooperation in 2009 as an important event selection, responsible for changing or creating trajectories of evolution in all three capacities. The most frequent improvements initiatives were of organizational nature and the internal planning activity has been transformed over the routines of the three capabilities. Important resources and complementary assets have been identified as important for the realization of initiatives, such as human resources technical knowledge to the technical capabilities and external cooperation, and business knowledge, for all of them, as well as IT assets: the iproject application for control of development processes, and the document repository wiki. All these resources and complementary assets grew along the capacities, demonstrating its strategic value to SINFO/UFRN

O papel das construtoras e incorporadoras na adoção da tecnologia BIM na indústria da construção no Brasil : um estudo prospectivo

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Arquitetura e Urbanismo, Programa de Pós-Graduação em Arquitetura e Urbanismo, 2015.

Avaliação de tipologias construtivas nos critérios de sustentabilidade : estudo de casos – telhas

Dissertação (mestrado)—Universidade de Brasília, Faculdade de Arquitetura e Urbanismo, Programa de Pós-Graduação em Arquitetura e Urbanismo, 2016.

Assessment of Seismic Damage of Buildings and Related Environmental Impacts

Sustainable development has only recently started examining the existing infrastructure, and a key aspect of this is hazard mitigation. To examine buildings under a sustainable perspective requires an understanding of a building's life-cycle environmental costs, including the consideration of associated environmental impacts induced by earthquake damage. Damage repair costs lead to additional material and energy consumption, leading to harmful environmental impacts. Merging results obtained from a seismic evaluation and life-cycle analysis for buildings will give a novel outlook on sustainable design decisions. To evaluate the environmental impacts caused by buildings, long-term impacts accrued throughout a building's lifetime and impacts associated with damage repair need to be quantified. A method and literature review for completing this examination has been developed and is discussed. Using software Athena and HAZUS-MH, this study evaluated the performance of steel and concrete buildings considering their life-cycle assessments and earthquake resistance. It was determined that code design-level greatly effects a building repair and damage estimations. This study presented two case study buildings and found specific results that were obtained using several premade assumptions. Future research recommendations were provided to make this methodology more useful in real-world applications. Examining cost and environmental impacts that a building has through, a cradle-to-grave analysis and seismic damage assessment will help reduce material consumption and construction activities from taking place before and after an earthquake event happens.

Developmentof engineering projects supported by BIM technology: internship report

Building Information Modeling (BIM) concept is able to reshape each AEC project and the industry in general, offering a comprehensive collaboration process over a model of structure with regularly actualized and synchronized information. This report presents an overview of BIM with focus on its core concepts, applications in the project life cycle and benefits for project stakeholders through four case studies carried out during the internship in the engineering office NEWTON - Engineering Consultancy Company. The aim of the four cases studies was to cover multidisciplinary and varied projects. The first case study highlights the engineering project’s workflow and presents a comparison of traditional procedures and BIM concepts applied on the rehabilitation of an existing building. In the second and third case study, attention is focused on the goals achieved, particularly by structural engineer, due to the implementation of the mentioned technology on a full-lifecycle BIM project of a small residence and a complex project of residential building in Porto and on its architectural integration. In addition, through the fourth case study, the spatial coordination of Mechanical, Electrical and Plumbing (MEP) systems at a large-scale hotel project has been analyzed and accomplished, highlighting merits of BIM at this project stage. Through a reduction of the space used for facilities and infrastructures and the ability to identify conflicts and to nullify the related costs, its advantage for a complex building was proved.

What Is a Firm’s Life Expectancy? Empirical Evidence in the Context of Portuguese Companies

It is a fact that the uncertainty about a firm’s future has to be measured and incorporated into a company’s valuation throughout the explicit analysis period – in the continuing or terminal value within valuation models. One of the concerns that can influence the continuing value of enterprises, which is not explicitly considered in traditional valuation models, is a firm’s average life expectancy. Although the literature has studied the life cycle of a firm, there is still a considerable lack of references on this topic. If we ignore the period during which a company has the ability to produce future cash flows, the valuations can fall into irreversible errors, leading to results markedly different from market values. This paper aims to provide a contribution in this area. Its main objective is to construct a mortality table for non-listed Portuguese enterprises, showing that the use of a terminal value through a mathematical expression of perpetuity of free cash flows is not adequate. We provide the use of an appropriate coefficient to perceive the number of years in which the company will continue to operate until its theoretical extinction. If well addressed regarding valuation models, this issue can be used to reduce or even to eliminate one of the main problems that cause distortions in contemporary enterprise valuation models: the premise of an enterprise’s unlimited existence in time. Besides studying the companies involved in it, from their existence to their demise, our study intends to push knowledge forward by providing a consistent life and mortality expectancy table for each age of the company, presenting models with an explicitly and different survival rate for each year. Moreover, we show that, after reaching a certain age, firms can reinvent their business, acquiring maturity and consequently postponing their mortality through an additional life period.

Energy harvesting for monitoring bridges over their operational life

The use of energy harvesting materials for large infrastructure is a promising and growing field. In this regard, the use of such harvesters for the purpose of structural health monitoring of bridges has been proposed in recent times as one of the feasible options since the deployment of them can remove the necessity of an external power source. This paper addresses the performance issue of such monitors over the life-cycle of a bridge as it deteriorates and the live load on the structure increases. In this regard, a Lead Zirconate Titanate (PZT) material is considered as the energy harvesting material and a comparison is carried out over the operational life of a reinforced concrete bridge. The evolution of annual average daily traffic (AADT) is taken into consideration, as is the degradation of the structure over time, due to the effects of corrosion. Evolution of such harvested energy is estimated over the life-cycle of the bridge and the sensitivity of harvested energy is investigated for varying rates of degradation and changes in AADT. The study allows for designing and understanding the potential of energy harvesters as a health monitor for bridges. This paper also illustrates how the natural growth of traffic on a bridge over time can accentuate the identification of damage, which is desirable for an ageing structure. The paper also assesses the impact and effects of deployment of harvesters in a bridge as a part of its design process, considering performance over the entire life-cycle versus a deployment at a certain age of the structure.

Techno-economic analysis of three HVAC retrofitting options

Accounting for around 40% of the total final energy consumption, the building stock is an important area of focus on the way to reaching the energy goals set for the European Union. The relatively small share of new buildings makes renovation of existing buildings possibly the most feasible way of improving the overall energy performance of the building stock. This of course involves improvements on the climate shell, for example by additional insulation or change of window glazing, but also installation of new heating systems, to increase the energy efficiency and to fit the new heat load after renovation. In the choice of systems for heating, ventilation and air conditioning (HVAC), it is important to consider their performance for space heating as well as for domestic hot water (DHW), especially for a renovated house where the DHW share of the total heating consumption is larger. The present study treats the retrofitting of a generic single family house, which was defined as a reference building in a European energy renovation project. Three HVAC retrofitting options were compared from a techno-economic point of view: A) Air-to-water heat pump (AWHP) and mechanical ventilation with heat recovery (MVHR), B) Exhaust air heat pump (EAHP) with low-temperature ventilation radiators, and C) Gas boiler and ventilation with MVHR. The systems were simulated for houses with two levels of heating demand and four different locations: Stockholm, Gdansk, Stuttgart and London. They were then evaluated by means of life cycle cost (LCC) and primary energy consumption. Dynamic simulations were done in TRNSYS 17. In most cases, system C with gas boiler and MVHR was found to be the cheapest retrofitting option from a life cycle perspective. The advantage over the heat pump systems was particularly clear for a house in Germany, due to the large discrepancy between national prices of natural gas and electricity. In Sweden, where the price difference is much smaller, the heat pump systems had almost as low or even lower life cycle costs than the gas boiler system. Considering the limited availability of natural gas in Sweden, systems A and B would be the better options. From a primary energy point of view system A was the best option throughout, while system B often had the highest primary energy consumption. The limited capacity of the EAHP forced it to use more auxiliary heating than the other systems did, which lowered its COP. The AWHP managed the DHW load better due to a higher capacity, but had a lower COP than the EAHP in space heating mode. Systems A and C were notably favoured by the air heat recovery, which significantly reduced the heating demand. It was also seen that the DHW share of the total heating consumption was, as expected, larger for the house with the lower space heating demand. This confirms the supposition that it is important to include DHW in the study of HVAC systems for retrofitting.

Life history of a wide-ranging deepwater lantern shark in the north-east Atlantic, Etmopterus spinax (Chondrichthyes: Etmopteridae), with implications for conservation

In this paper, the population biology of the velvet belly lanternshark Etmopterus spinax was studied and life-history coefficients determined. Age was estimated from sections of the second dorsal spine and validated by marginal increment analysis. Males attained a maximum age of 8 years while 11 year-old females were found. Several growth models were fitted and compared for both size-at-age and mass-at-age data, showing that even though this is a small-sized species, it has a relatively slow growth rate. This species matures late, specifically at 49.6 and 42.5% of the maximum observed ages for males and females, respectively. It has a low fecundity, with a mean ovarian fecundity of 9.94 oocytes and a mean uterine fecundity of 7.59 embryos per reproductive cycle. This species seems to have a long reproductive cycle, and even though no conclusive data were obtained, a 2-3 year cycle is possible. The estimated coefficients indicate that this species has a vulnerable life cycle, typical of deepwater squalid sharks. Given the high fishing pressures that it is suffering in the north-east Atlantic, this fish may already be facing severe declines or in risk of facing them in the near future. (C) 2008 The Authors Journal compilation (C) 2008 The Fisheries Society of the British Isles

Life history & environmental effects on telomere dynamics in Atlantic salmon

While much of the study of molecular biology inevitably focuses on the parts of the genome that contain active genes, there are also non-coding regions that nonetheless play an essential role in maintaining genome integrity. One such region are telomeres, which cap the ends of all eukaryotic chromosomes and play an important role in chromosome protection. Telomere loss occurs at each cell division as a result of the ‘end replication problem’ and a relatively short telomere length is indicative of poor biological state. Thus far, the majority of studies on the dynamics and role of telomeres have been biased towards certain taxa. Research to date has mostly focussed on humans, other mammals and birds. There has been far less research on the telomere dynamics of ectotherms. It is important that we do so, especially since ectothermic vertebrates do not seem to down-regulate telomerase expression in the same way as endotherms, suggesting that their telomere dynamics may be less predictable in the later life stages. The main objective of this thesis was therefore to investigate how life history and environmental effects may influence telomere dynamics in Atlantic salmon Salmo salar. I carried out carefully designed experiments, both in the laboratory and in the wild, using a longitudinal approach where possible, in order to address a number of specific questions that are connected to this central theme. In chapter 2, I demonstrate that there can be significant links between parental life history and offspring telomere dynamics. Maternal life history traits, in particular egg size, were most strongly related to offspring telomere length at the embryonic stages. Paternal life history traits, such as early life growth rate, had a greater association with offspring telomere dynamics in the later stages of development. In chapter 3, using a wild Atlantic salmon population, I found that most individuals experienced a reduction in telomere length during the migratory phase of their life cycle; however the relative rate of telomere loss was dependent on sex, with males experiencing a relatively greater loss. Unexpectedly, I also found that juvenile salmon that had the shortest telomeres at the time of outward migration, had the greatest probability of surviving through to the return migration. In chapter 4, again using a wild system involving experimental manipulations of juvenile Atlantic salmon in Scottish streams, I found that telomere length in juvenile fish was influenced by parental traits and by direct environmental effects. Faster-growing fish had shorter telomeres and there was a greater cost (in terms of reduced telomere length) if the growth occurred in a harsher environment. I also found a positive association between offspring telomere length and the growth history of their fathers (but not mothers), represented by the number of years that fathers had spent at sea. Chapter 5 explored the hypotheses that oxidative DNA damage, catalase (CAT) antioxidant activity and cell proliferation rate are underlying mechanisms linking incubation temperature and telomere dynamics in salmon embryos. No evidence was found for any such effects, but telomere lengths in salmon embryos were found to be significantly affected by the temperature of the water in which they were living. There is also evidence that telomere length significantly increases during embryonic development. In summary, this thesis has shown that a complex mix of environmental and parental effects appear to influence telomere dynamics in Atlantic salmon, with parental effects especially evident during early life stages. It also demonstrated that telomeres lengthen through the embryo stages of development before reducing once the fry begin feeding, indicating that the patterns of telomere loss commonly found in endotherms may differ in ectotherms. Reasons for this variation in telomere dynamics are presented in the final Discussion chapter of the thesis.

Valutazione degli impatti ambientali di un processo biobased nella produzione di acido crotonico

L’utilizzo di biomasse come fonte di chemicals nell’industria chimica mira a rendere più sostenibili i processi industriali e i materiali prodotti. In particolare, l’acido crotonico (AC), impiegato come building block nella produzione di vernici e rivestimenti, è prodotto tradizionalmente da fonti fossili. La domanda globale ammonta a circa 1000 tonnellate ed è in continuo aumento, rendendo prioritaria l’individuazione di una sintesi alternativa e sostenibile. In questo studio, l’analisi del ciclo di vita (life cycle assessment, LCA) è stata applicata per stimare la carbon footprint e la domanda cumulativa di energia relative ad una sintesi innovativa dell’AC, basata sulla conversione termica di un precursore derivato da biomasse di scarto. In particolare, il processo prevede l’applicazione di un trattamento termochimico a poli-idrossi-butirrati (PHB) prodotti da colture batteriche miste a valle del processo B-PLAS. Sono stati modellati due scenari comparativi con l’obiettivo di (i) valutare la sostenibilità ambientale della sintesi alternativa nella tecnologia B-PLAS, considerando una condizione “base” di processo (con un contenuto di PHB pari al 30% nello slurry in ingresso al processo) e una “ottimale” (con un contenuto di PHB pari al 60%); (ii) confrontare gli impatti ambientali del processo di sintesi alternativo per entrambi gli scenari con quelli di sintesi dell’AC da fonti fossili. I risultati dell’LCA mostrano che nel processo B-PLAS, giunti alla produzione dello slurry (fango) arricchito in PHB, si possono avere due strade equivalenti estraendo i PHB o convertendoli in AC con una lieve preferenza per il processo estrattivo (0.71MJ/kgslurry vs 1.11MJ/kgslurry) nella condizione di base e (0.69MJ/kgslurry vs 1.17MJ/kgslurry) in quella ottimale. Estendendo la comparazione alla produzione dell’AC da fonti fossili, quello bioderivato comporta un impatto ambientale ampiamente inferiore, stimato in 159.6 MJ/kgAC e 204.6 MJ/kgAC per gli scenari “base” e “ottimale”.

PCM-based battery thermal management systems, energy saving materials and LCA strategy for automotive

This PhD work arises from the necessity to give a contribution to the energy saving field, regarding automotive applications. The aim was to produce a multidisciplinary work to show how much important is to consider different aspects of an electric car realization: from innovative materials to cutting-edge battery thermal management systems (BTMSs), also dealing with the life cycle assessment (LCA) of the battery packs (BPs). Regarding the materials, it has been chosen to focus on carbon fiber composites as their use allows realizing light products with great mechanical properties. Processes and methods to produce carbon fiber goods have been analysed with a special attention on the university solar car Emilia 4. The work proceeds dealing with the common BTMSs on the market (air-cooled, cooling plates, heat pipes) and then it deepens some of the most innovative systems such as the PCM-based BTMSs after a previous experimental campaign to characterize the PCMs. After that, a complex experimental campaign regarding the PCM-based BTMSs has been carried on, considering both uninsulated and insulated systems. About the first category the tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs; the insulated tested systems have been pure PCM-based and copper-foam-loaded-PCM-based BTMSs and both of these systems equipped with a liquid cooling circuit. The choice of lighter building materials and the optimization of the BTMS are strategies which helps in reducing the energy consumption, considering both the energy required by the car to move and the BP state of health (SOH). Focusing on this last factor, a clear explanation regarding the importance of taking care about the SOH is given by the analysis of a BP production energy consumption. This is why a final dissertation about the life cycle assessment (LCA) of a BP unit has been presented in this thesis.

L'edilizia residenziale nell'era dell'economia circolare. Modelli e paradigmi per la rigenerazione delle periferie urbane

Il patrimonio residenziale italiano ammonta a 12,2 milioni di edifici, di cui il 57,5% ha più di 50 anni ed è stato costruito in assenza di normative specifiche, in termini di sicurezza sismica, resistenza al fuoco, efficienza energetica e accessibilità, e manifesta un’avanzata obsolescenza. Agire su questo patrimonio significa operare tramite le due macro categorie di intervento: demolizione/ricostruzione o riqualificazione energetica. Questa ricerca dottorale vuole indagare la demolizione/ricostruzione di comparti urbani periferici, costruiti tra 1945-1965, quale strategia di rigenerazione urbana, integrandola in un modello edilizio basato sui criteri dell’economia circolare. Vengono definite le caratteristiche costruttive e i principi di questo modello di progettazione ecosistemica, denominato Integrho, che coniuga i criteri di ecodesign nel ciclo di vita (Building in Layers, Design for Disassembly e il Design out Waste) con quelli di bioclimaticità e di adattabilità funzionale. Il lavoro è stato improntato secondo due livelli gerarchici, scala urbana e scala edilizia, tra loro correlate mediante quella intermedia dell’isolato, al fine di ottenere un obiettivo di natura metodologica: definire uno strumento di supporto decisionale, capace di indirizzare tra le categorie di intervento attraverso parametri oggettivi, valutati con analisi comparative speditive. Tale metodologia viene applicata al contesto di Bologna, e si fonda sulla creazione di un’approfondita base conoscitiva attraverso la catalogazione delle 8.209 pratiche edilizie di nuova costruzione presentate tra 1945 e il 1965. Tale strumento georeferenziato, contenente informazioni tipologiche, costruttive ecc., è impiegato per valutare in modo quantitativo e speditivo i consumi energetici, i materiali incorporati, gli impatti ambientali e i costi economici dei differenti scenari di intervento nel ciclo di vita. Infine, l’applicazione del modello edilizio Integrho e del paradigma Ri-Costruire per Ri-Generare ad uno degli isolati periferici selezionati, è impiegata come esemplificazione dell’intero processo, dalla fase conoscitiva a quella strumentale, al fine di verificarne l’attendibilità e l’applicabilità su larga scala.

Structural steel design with BIM technology - interventions on a three buildings block in Deruta (PG)

The aim of this thesis is to use the developments, advantages and applications of "Building Information Modelling" (BIM) with emphasis on the discipline of structural design for steel building located in Perugia. BIM was mainly considered as a new way of planning, constructing and operating buildings or infrastructures. It has been found to offer greater opportunities for increased efficiency, optimization of resources and generally better management throughout the life cycle of a facility. BIM increases the digitalization of processes and offers integrated and collaborative technologies for design, construction and operation. To understand BIM and its benefits, one must consider all phases of a project. Higher initial design costs often lead to lower construction and operation costs. Creating data-rich digital models helps to better predict and coordinate the construction phases and operation of a building. One of the main limitations identified in the implementation of BIM is the lack of knowledge and qualified professionals. Certain disciplines such as structural and mechanical design depend on whether the main contractor, owner, general contractor or architect need to use or apply BIM to their projects. The existence of a supporting or mandatory BIM guideline may then eventually lead to its adoption. To test the potential of the BIM adoption in the steel design process, some models were developed taking advantage of a largely diffuse authoring software (Autodesk Revit), to produce construction drawings and also material schedule that were needed in order to estimate quantities and features of a real steel building. Once the model has been built the whole process has been analyzed and then compared with the traditional design process of steel structure. Many relevant aspect in term of clearness and also in time spent were shown and lead to final conclusions about the benefits from BIM methodology.