Testing of disability identification tool for schools

There has been an ongoing concern about the lack of reliable data on disabled children in schools. To date there has been no consistent way of identifying and categorising disabilities. Schools in England are currentlyrequired to collect data on children with Special Educational Need (SEN), but this does not capture information about all disabled children. The lack of this information may seriously restrict capacity at all levels of policy and practice to understand and respond to the needs of disabled children and their families in line with Disability Discrimination Act (2005) and the single Equality Act (2010). The aim of the project was to test the draft tools for identifying disability and accompanying guidance in a sample of all types of maintained schools in order to assess their usability and reliability and whether they resulted in the generation of robust and consistent data that could reliably inform school returns for the annual School Census.

Departmental differences in attitudes to special educational needs in the secondary school

As trends in favour of inclusion continue, questions arise concerning the extent to which teachers in mainstream schools feel prepared for the task of meeting pupils' special educational needs. Little previous research has considered how the subject taught impacts upon the attitudes of mainstream teachers towards pupils with special educational needs. In this article, Jean Ellins, research fellow at the University of Birmingham, and Jill Porter, senior lecturer at the University of Bath, report on their research into the attitudes of teachers in one mainstream secondary school. Building a detailed case study using documents, records of pupil progress, an interview and a questionnaire using a Likert-type attitude scale and open-ended questions, these researchers set out to explore distinctions between the attitudes of teachers working in different departments. Their findings suggest that the teachers of the core subjects, English, mathematics and science, had less positive attitudes than their colleagues. Further, pupils with special educational needs made least progress in science where teacher attitudes were the least positive. Jean Ellins and Jill Porter review the implications of these findings and make recommendations for future practice and further enquiry.

Reliability of a method for evaluating porosity in denture base resins

Background: The method of porosity analysis by water absorption has been carried out by the storage of the specimens in pure water, but it does not exclude the potential plasticising effect of the water generating unreal values of porosity. Objective: The present study evaluated the reliability of this method of porosity analysis in polymethylmethacrylate denture base resins by the determination of the most satisfactory solution for storage (S), where the plasticising effect was excluded. Materials and methods: Two specimen shapes (rectangular and maxillary denture base) and two denture base resins, water bath-polymerised (Classico) and microwave-polymerised (Acron MC) were used. Saturated anhydrous calcium chloride solutions (25%, 50%, 75%) and distilled water were used for specimen storage. Sorption isotherms were used to determine S. Porosity factor (PF) and diffusion coefficient (D) were calculated within S and for the groups stored in distilled water. anova and Tukey tests were performed to identify significant differences in PF results and Kruskal-Wallis test and Dunn multiple comparison post hoc test, for D results (alpha = 0.05). Results: For Acron MC denture base shape, FP results were 0.24% (S 50%) and 1.37% (distilled water); for rectangular shape FP was 0.35% (S 75%) and 0.19% (distilled water). For Classico denture base shape, FP results were 0.54% (S 75%) and 1.21% (distilled water); for rectangular shape FP was 0.7% (S 50%) and 1.32% (distilled water). FP results were similar in S and distilled water only for Acron MC rectangular shape (p > 0.05). D results in distilled water were statistically higher than S for all groups. Conclusions: The results of the study suggest that an adequate solution for storing specimens must be used to measure porosity by water absorption, based on excluding the plasticising effect.

Ovarian-Steroid Modulation of Locus Coeruleus Activity in Female Rats: Involvement in Luteinising Hormone Regulation

The noradrenergic nucleus locus coeruleus (LC) has been reported to regulate luteinising hormone (LH) secretion in female rats. Both oestrogen and progestin receptors have been demonstrated in LC neurones, suggesting that these cells are possibly responsive to variations in circulating levels of ovarian steroids. We therefore evaluated changes in the activity of LC neurones during the oestrous cycle and after ovarian-steroid treatment in ovariectomised (OVX) rats, as determined by immunoreactivity to Fos-related antigens (FRA), which comprises all of the known members of the Fos family. Effects of ovarian steroids on the firing rate of LC neurones were also determined in a slice preparation. The number of FRA/tyrosine hydroxylase (TH)-immunoreactive (ir) neurones in the LC increased from 14.00-16.00 h on pro-oestrus, coinciding with the onset of the LH surge and rise in plasma progesterone. FRA immunoreactivity was unaltered during dioestrus. Oestradiol-treated OVX rats (OVX+E) displayed marked reduction in FRA/TH-ir neurones in LC compared to oil-treated OVX rats. Accordingly, oestradiol superfusion significantly reduced the spontaneous firing rate of LC neurones in slices from OVX rats. Compared to OVX+E, oestradiol-treated rats injected with progesterone at 08.00 h (OVX+EP) exhibited higher number of FRA/TH-ir neurones in the LC at 10.00 h and 16.00 h, and great amplification of the LH surge. Bath application of progesterone significantly increased the spontaneous firing rate of OVX+E LC neurones. Our data suggest that ovarian steroids may physiologically modulate the activity of LC neurones in females, with possible implications for LH secretion. Moreover, oestradiol and progesterone appear to exert opposite and complementary effects (i.e. whereas oestradiol inhibits, progesterone, after oestradiol priming, stimulates LC activity).

Connective tissue mast cells are the target of formaldehyde to induce tracheal hyperresponsiveness in rats: Putative role of leukotriene B(4) and nitric oxide

Formaldehyde (FA) exposure induces upper airways irritation and respiratory abnormalities, but its mechanisms are not understood. Since mast cells are widely distributed in the airways, we hypothesized that FA might modify the airways reactivity by mechanism involving their activation. Tracheal rings of rats were incubated with Dulbecco`s modified medium culture containing FA (0.1 ppm) in 96-well plastic microplates in a humid atmosphere. After 30 min, 6 h, and 24-72 h, the rings were suspended in an organ bath and dose-response curve to methacholine (MCh) were determined. incubation with FA caused a transient tracheal hyperresponsiveness to MCh that was independent from tracheal epithelium integrity. Connective tissue mast cell depletion caused by compound 48/80 or mast cell activation by the allergic reaction, before exposure of tracheal rings to FA prevented the increased responsiveness to MCh. LTB(4) concentrations were increased in the culture medium of tracheas incubated with FA for 48 h, whereas the LTB(4)-receptor antagonist MK886 (1 mu M) added before FA exposure rendered the tracheal rings normoreactive to MCh. In addition, FA exposure did not cause hyperresponsiveness in tracheal segments incubated with L-arginine (1 mu M). We suggest that airway connective tissue mast cells constitute the target and may provide the increased LTB(4) generation as well as an elevated consumption of NO leading to tracheal hyperresponsiveness to MCh. (C) 2009 Elsevier Ireland Ltd. All rights reserved.

First order reversal curve analysis of nanocrystalline Pd(80)Co(20) alloy films

Films of isotropic nanocrystalline Pd(80)Co(20) alloys were obtained by electrodeposition onto brass substrate in plating baths maintained at different pH values. Increasing the pH of the plating bath led to an increase in mean grain size without inducing significant changes in the composition of the alloy. The magnetocrystalline anisotropy constant was estimated and the value was of the same order of magnitude as that reported for samples with perpendicular magnetic anisotropy. First order reversal curve (FORC) analysis revealed the presence of an important component of reversible magnetization. Also, FORC diagrams obtained at different sweep rate of the applied magnetic field, revealed that this reversible component is strongly affected by kinetic effect. The slight bias observed in the irreversible part of the FORC distribution suggested the dominance of magnetizing intergrain exchange coupling over demagnetizing dipolar interactions and microstructural disorder. (c) 2009 Elsevier B.V. All rights reserved.

Effects of milk supplementation with skim milk powder, whey protein concentrate and sodium caseinate on acidification kinetics, rheological properties and structure of nonfat stirred yogurt

Milk supplementation with milk proteins in four different levels was used to investigate the effect on acidification and textural properties of yogurt. Commercial skim milk powder was diluted in distilled water, and the supplements were added to give different enriched-milk bases; these were heat treated at 90 degrees C for 5 min. These mixtures were incubated with the bacterial cultures for fermentation in a water bath, at 42 degrees C, until pH 4.50 was reached. Chemical changes during fermentation were followed by measuring the pH. Protein concentration measurements, microbial counts of Lactobacillus bulgaricus and Streptococcus thermophilus, and textural properties (G`, G ``, yield stress and firmness) were determined after 24 h of storage at 4 degrees C. Yogurt made with milk supplemented with sodium caseinate resulted in significant properties changes, which were decrease in fermentation time, and increase in yield stress, storage modulus, and firmness, with increases in supplement level. Microstructure also differed from that of yogurt produced with milk supplemented with skim milk powder or sodium caseinate. (C) 2009 Elsevier Ltd. All rights reserved.

Membrane Morphology Modifications Induced by Hydroquinones

We synthesize and characterize alkylthiohydroquinones (ATHs) in order to investigate their interactions with lipid model membranes, POPE and POPC. We observe the formation of structures with different morphologies, or curvature of the lipid bilayer, depending on pH and increasing temperature. We attribute their formation to changes in the balance charge/polarity induced by the ATHs. Mixtures of ATHs with POPE at pH 4 form two cubic phases, P4(3)32 and Im3m, that reach a maximum lattice size at 40 degrees C while under basic conditions these phases only expand upon heating from room temperature. The cubic phases coexist with lamellar or hexagonal phases and are associated with inhomogeneous distribution of the ATH molecules over the lipid matrix. The zwitterionic POPC does not form cubic phases but instead shows lamellar structures with no clear influence of the 2,6-BATH.

Electrodeposition and characterization of undoped and nitrogen-doped ZnSe films

Semiconducting films of (n-type) ZnSe and (p-type) nitrogen-doped ZnSe were electrodeposited by a linear-sweep voltammetric technique on to a substrate of fluorine-tin oxide (FM) glass ceramics. The films were characterized by scanning electron microscopy, energy-dispersive X-ray analysis and grazing-incidence X-ray diffraction. The results indicated that the material was deposited uniformly over the substrate, forming clusters when the Zn content of the bath was 0.1 mol L(-1) and a film when it was 0.2 or 0.3 mol L(-1). The effectiveness of doping the films with nitrogen by adding ammonium sulfate to the deposition solution was assessed by measuring the film-electrolyte interface capacitance (C) at various applied potentials (E(ap)) and plotting Mott-Schottky curves (C(-2) vs E(ap)), whose slope sign was used to identify p-type ZnSe. (C) 2009 Elsevier B.V. All rights reserved.

Heterogeneous photocatalytic degradation of acid dyes in aqueous TiO2 suspensions: Kinetics and toxicity

This work assesses the photocatalytic (TiO2/UV) degradation of a simulated acid dye bath (Yellow 3, Red 51, Blue 74, and auxiliary chemicals). Color and phytotoxicity removal were monitored by spectrophotometry and lettuce (Lactuca sativa) seeds as the test organism, respectively. Mineralization was determined by DOC analyses. Photocatalytic, photolytic, and adsorption experiments were performed, showing that adsorption was negligible. After 240 minutes of irradiation, it was achieved 96% and 78% of color removal with photocatalysis and photolysis, respectively. 37% of mineralization occurred with photocatalysis only. The dye bath was rendered completely non-toxic after 60 minutes of photocatalytic treatment; the same result was only achieved with photolysis after 90 minutes. A kinetic model composed of two first-order in series reactions was used. The first photocatalytic decolorization rate constant was k(1) = 0.062 min(-1) and the second k(2) = 0.0043 min(-1), approximately two times greater than the photolytic ones.

Organic additive-copper(II) complexes as plating precursors

Cu(II) ions previously coordinated with typical electroplating organic additives were investigated as an alternative source of metal for plating bath. The coordination complexes were isolated from reaction between CuSO(4) and organic additives as ligands (oxalate ion, ethylenediamine or imidazole). Deposits over 1010 steel were successfully obtained from electroplated baths using the complexes without any addition of free additives, at pH = 4.5 (H(2)SO(4)/Na(2)SO(4)). These deposits showed better morphologies than deposits obtained from CuSO(4) solution either in the absence or presence of oxalate ion as additive (40 mmol L(-1)), at pH = 4.5 (H(2)SO(4)/Na(2)SO(4))It is suggestive that the starting metal plating coordinated with additives influences the electrode position processes, providing deposits with corrosion potentials shifted over + 200 mV in 0.5 mol L(-1) NaCl (1 mV s(-1)). The resistance against corrosion is sensitive to the type of additive-complex used as precursor. The complex with ethylenediamine presented the best deposit results with the lowest pitting potential (-0.27 V vs 3.0 mol L(-1) CE). It was concluded that the addition of free additives to the electrodeposition baths is not necessary when working with previously coordinated additives. Thus, the complexes generated in ex-situ are good alternatives as plating precursors for electrodeposition bath. (C) 2009 Elsevier B.V. All rights reserved.

Heterogeneous photocatalytic degradation of reactive dyes in aqueous TiO(2) suspensions: Decolorization kinetics

This work assesses the photocatalytic (TiO(2)/UV) degradation of a simulated reactive dye bath (Black 5, Red 239, Yellow 17, and auxiliary chemicals). Color removal was monitored by spectrophotometry. Mineralization was determined by DOC analyses. Photocatalytic, photolytic, and adsorption experiments were performed, showing that adsorption was negligible. After 30 min of irradiation, it was achieved 97% and 40% of color removal with photocatalysis and photolysis, respectively. No mineralization occurred within 30 min. A kinetic model composed of two, first-order in-series reactions was used. The first photocatalytic decolorization rate constant was k(1) = 2.6 min(-1) and the second k(2) = 0.011 min(-1). The fast decolorization of Reactive Black 5 dye is an indication that the number of azo and vinylsulfone groups in the dye molecule maybe a determining factor for the increased photolytic and photocatalytic color removal and degradation rates. (C) 2008 Elsevier B.V. All rights reserved.

Förpackningsframställning för skönhetsvård

This degree project was intendet to construct and design packaging for beauty care. At the requestof AssiDomän Frövi the project group were instructed to innovate creative packagesmade of their cardboard Frövi Bright.Three different packages have been developed. Two of them are for child care products and onepackage is for several bath products. These results show that there are possibilities to create creativeand different packages of the cardboard Frövi Bright.The report also enters deeply into the special qualities of Frövi Bright and studies of packagingdesign.

Gestão da inovação para a sustentabilidade ambiental: estudos de caso do desenvolvimento e difusão de produtos de consumo industrializados com materiais de fontes renováveis

O objetivo desta tese é identificar como ocorre a gestão da inovação de produto ambientalmente sustentável. Pelo método de estudo de caso e sob a perspectiva de três vertentes da teoria organizacional (estrutura do setor de negócios, visão baseada em recursos e visão relacional) foi realizada uma análise abrangente de como os condicionantes externos do ambiente competitivo, os condicionantes internos empresariais e os relacionamentos organizacionais impactaram no projeto de desenvolvimento e difusão de duas inovações de produto com atributos favoráveis à sustentabilidade ambiental: uma esponja de banho com fibras amazônicas e PET reciclado e um lava-louças líquido para o pronto-uso de fontes renováveis. Os dois casos apresentam marcantes diferenças em relação ao porte das empresas, às estruturas, competências e culturas organizacionais, à maturidade das respectivas plataformas tecnológicas de fontes renováveis e às abordagens utilizadas na gestão dos projetos de desenvolvimento de novo produto. Além disso, os dois casos são distintos na competitividade dos atributos de produto ambientais e funcionais em relação ao preço ante os produtos concorrentes. Apesar destas diferenças, construtos da visão relacional foram utilizados para identificar similaridades entre os dois estudos de caso na gestão da inovação. Redes informais internas realizaram uma inovação organizacional ao criarem um departamento de sustentabilidade, o qual realizou diagnósticos e recomendações para minimizar os riscos sócio-ambientais e regulatórios decorrentes do suprimento da fibra amazônica para a esponja de banho. E um relacionamento colaborativo complementou a inovação de produto e realizou inovações de marketing que proporcionaram o melhor desempenho na difusão do lava-louças pronto-uso de fontes renováveis no varejo. Portanto, apesar das diferenças nos condicionantes internos e externos, a gestão da inovação nos dois casos se utilizou de relacionamentos colaborativos a fim de gerar inovações empresariais que solucionaram as restrições ao processo de inovação de produto ambientalmente sustentável.

Aplicação da abordagem WebQual na avaliação da qualidade de sites de busca no Brasil

Com o rápido crescimento da Internet, a quantidade de informações disponíveis tornou-se gigantesca, dificultando a busca pelo que realmente é essencial. Da mesma forma que vários esforços na divulgação de informações relevantes foram efetuados, sites de qualidade duvidosa também apareceram. Os "Sites de busca, apesar de ainda limitados, passaram a ter papel cada vez mais importante, e alguns deles são, hoje, líderes em número de acessos. A avaliação da qualidade de sites na Internet é, hoje, tópico de estudo de vários pesquisadores em todo o mundo. Vários modelos de avaliação existem, com focos que se alternam entre a avaliação dos aspectos tecnológicos e a medição da qualidade percebida pelo usuário ou consumidor. Nesta pesquisa, optou-se por analisar a aplicabilidade do instrumento "WebOual" - criado pelos professores Stuart Barnes (Victoria University of Wellington - Nova Zelândia) e Richard Vidgen (Universidade de Bath - Inglaterra) - o qual privilegia a avaliação da qualidade dos sites pesquisados pela ótica do usuário ou consumidor. Será aplicada a abordagem WebOual a três sites de busca internacionais que possuem versões localizadas em português. no Brasil: Altavista, Yahoo! e Google. Trata-se de utilização inédita da abordagem WebOual, anteriormente testada por seus criadores na avaliação de sites de Livrarias Virtuais, Universidades, Leilões ontine e sites WAP.