Genetic differentiation of continental and island populations of Bombus terrestris (Hymenoptera: Apidae) in Europe.

Ten microsatellite loci and a partial sequence of the COII mitochondrial gene were used to investigate genetic differentiation in B. terrestris, a bumble bee of interest for its high-value crop pollination. The analysis included eight populations from the European continent, five from Mediterranean islands (six subspecies altogether) and one from Tenerife (initially described as a colour form of B. terrestris but recently considered as a separate species, B. canariensis). Eight of the 10 microsatellite loci displayed high levels of polymorphism in most populations. In B. terrestris populations, the total number of alleles detected per polymorphic locus ranged from 3 to 16, with observed allelic diversity from 3.8 +/- 0.5 to 6.5 +/- 1.4 and average calculated heterozygosities from 0.41 +/- 0.09 to 0.65 +/- 0.07. B. canariensis showed a significantly lower average calculated heterozygosity (0.12 +/- 0.08) and observed allelic diversity (1.5 +/- 0.04) as compared to both continental and island populations of B. terrestris. No significant differentiation was found among populations of B. terrestris from the European continent. In contrast, island populations were all significantly and most of them strongly differentiated from continental populations. B. terrestris mitochondrial DNA is characterized by a low nucleotide diversity: 0.18% +/- 0.07%, 0.20% +/- 0.04% and 0.27% +/- 0.04% for the continental populations, the island populations and all populations together, respectively. The only haplotype found in the Tenerife population differs by a single nucleotide substitution from the most common continental haplotype of B. terrestris. This situation, identical to that of Tyrrhenian islands populations and quite different from that of B. lucorum (15 substitutions between terrestris and lucorum mtDNA) casts doubts on the species status of B. canariensis. The large genetic distance between the Tenerife and B. terrestris populations estimated from microsatellite data result, most probably, from a severe bottleneck in the Canary island population. Microsatellite and mitochondrial DNA data call for the protection of the island populations of B. terrestris against importation of bumble bees of foreign origin which are used as crop pollinators.

Quantitative analysis of crystal/grain sizes and their distributions in 2D and 3D

We review methods to estimate the average crystal (grain) size and the crystal (grain) size distribution in solid rocks. Average grain sizes often provide the base for stress estimates or rheological calculations requiring the quantification of grain sizes in a rock's microstructure. The primary data for grain size data are either 1D (i.e. line intercept methods), 2D (area analysis) or 3D (e.g., computed tomography, serial sectioning). These data have been used for different data treatments over the years, whereas several studies assume a certain probability function (e.g., logarithm, square root) to calculate statistical parameters as the mean, median, mode or the skewness of a crystal size distribution. The finally calculated average grain sizes have to be compatible between the different grain size estimation approaches in order to be properly applied, for example, in paleo-piezometers or grain size sensitive flow laws. Such compatibility is tested for different data treatments using one- and two-dimensional measurements. We propose an empirical conversion matrix for different datasets. These conversion factors provide the option to make different datasets compatible with each other, although the primary calculations were obtained in different ways. In order to present an average grain size, we propose to use the area-weighted and volume-weighted mean in the case of unimodal grain size distributions, respectively, for 2D and 3D measurements. The shape of the crystal size distribution is important for studies of nucleation and growth of minerals. The shape of the crystal size distribution of garnet populations is compared between different 2D and 3D measurements, which are serial sectioning and computed tomography. The comparison of different direct measured 3D data; stereological data and direct presented 20 data show the problems of the quality of the smallest grain sizes and the overestimation of small grain sizes in stereological tools, depending on the type of CSD. (C) 2011 Published by Elsevier Ltd.

IRF6 is a mediator of the Notch pro-differentiation and tumour suppressive function in keratinocytes

I. Résumé large publicIRF6 est un médiateur de Notch dans la différenciation des kératinocytes et dans sa fonction de suppresseur de tumeursLa peau est l'organe le plus important du corps humain, elle représente chez l'adulte une surface d'environ 1,5 m2 et elle est composée de 2000 milliards de cellules. La peau est composée de plusieurs types cellulaires dont les kératinocvtes. Ces cellules, qui se trouvent dans la couche la plus externe de la peau (Pépiderme), nous protègent de la déshydratation et des agressions externes telles que les infections et rayons ultraviolets. Cette fonction de « barrière » est mise en place grâce à un processus appelé différenciation des kératinocvtes durant lequel les kératinocytes deviennent matures et finalement meurent pour former la couche cornée la plus externe difficilement pénétrable. L'homéostasie tissulaire est un mécanisme qui régule l'équilibre entre prolifération, différentiation et mort cellulaire. Une perturbation de cet équilibre peut mener à la formation d'une tumeur. Il existe différents types de tumeurs de la peau. Nous nous sommes intéressés aux «carcinomes spino-cellulaires» (SCC) qui se développent à partir des keratinocytes en différenciation. Notch est une molécule impliquée positivement dans la différenciation des kératinocytes et joue un rôle prépondérant dans la suppression des tumeurs kératinocytaires comme les SCC dans lesquelles Notch est faiblement exprimé. L'implication de Notch dans la différenciation et dans la carcinogenèse kératinocytaire n'est plus controversée, mais les mécanismes qui sont à la base de ces fonctions restent encore à élucider. IRfF6 est une protéine qui, d'après sa structure, a été classée parmi une famille de régulateurs de la défense de l'organisme (IRFs). Des études ultérieures ont montré qu'IRf 6 n'a pas de rôle dans la réponse immunitaire mais qu'il est plutôt impliqué dans le développement de l'épiderme. Dans ce travail, nous avons établi que, dans les kératinocytes, l'expression d'IPJF6 est contrôlé par Notch et que, comme pour ce dernier, elle est réduite dans les SCCs. De plus, nous avons observé qu'IRF6 régule les mêmes gènes que Notch, et qu'il est en effet un médiateur de la fonction de Notch dans la différenciation des kératinocytes. Parmi les gènes contrôlés par l'axe Notch-IRF6 il y en a trois qui sont sur-exprimés dans les SCCs et qui sont réprimés par cet axe. Il s'agit d'une part d'IRF3 et IRF7, deux autres membres de la famille IRF, et du récepteur EGFR (Epidermal growth factor receptor), un oncogène (un gène impliqué dans l'accélération de la formation de tumeurs). Dans leur ensemble, ces découvertes nous informent sur les mécanismes impliqués dans les fonctions pro-differentiatrice et tumeur suppressive de Notch. Plus encore, elles ouvrent des perspectives intéressantes quant au développement de nouvelles approches thérapeutiques dans le traitement des cancers.II. RésuméLa voie de signalisation de Notch joue un rôle très important dans la différenciation cellulaire et dans la carcinogenèse de nombreux tissus. Dans les kératinocytes, elle agit comme suppresseur de tumeurs, fonction altérée dans les cancers spino cellulaires SCC (tumeurs kératinocytaires) de part la perte d'expression de Notch.Bien que les fonctions pro-différenciatrice et tumeur-suppressive de la voie de signalisation de Notch soient aujourd'hui reconnues, les mécanismes sous-jacents restent à explorer.Dans ce travail, nous montrons qu'IRF6, un membre de la famille des régulateurs de la voie de l'interféron (IRF), ne possédant pas de rôles dans la réponse immunitaire mais essentiel dans le développement de l'épiderme, est d'autant plus exprimé que le kératinocytes sont différenciées alors que son expression est drastiquement diminuée dans les SCC. De façon intéressante, l'expression d'IRF6 durant la différenciation kératinocytaire est directement contrôlée par Notch.Dans les kératinocytes l'expression accrue d'IRP6 a les mêmes effets que 1'activation de la voie de Notch induisant les marqueurs de différentiation des couches supra-basales de l'épiderme et inhibant ceux de la couche basale impliqués dans la prolifération cellulaire. Cependant IRF6 n'est pas impliqué dans la régulation d'autres cibles de Notch, comme p21WAFI/CiP' et Hesl. Comme Notch, IRF6 contrôle négativement l'expression de EGFR et IRF3/7. De ce fait EGFR et IRF3 et IRF7 sont fortement exprimés dans les SCCs humaines où l'expression de Notch et IRF6 est fortement réduite.En conclusion, nous avons démontré qu'IRF6 est une cible directe de Notch/CSL dans les keratinocytes qui medie les effets "non-canonique" de cette voie de signalisation dans la différentiation et dans la suppression tumorale.III. SummaryThe Notch pathway is an important regulator of differentiation and carcinogenesis. In keratinocytes it acts as tumour suppressor and the Notch gene is markedly reduced in keratinocyte-derived squamous cell carcinoma (SCC). While the pro-differentiation and tumour suppressive functions of Notch signalling in keratinocytes are well established, the underlying mechanisms are still poorly understood, We report here that Interferon Regulatory Factor 6 (IRF6), an IRF family member with an essential role in epidermal development, is downmodulated in SCC and is induced in differentiating cells. We observed that the induction of IRF6 in differentiating keratinocytes is suppressed by Notch inhibition. IRF6 expression is also decreased in mice with keratinocyte-specific deletion of the Notch 1/2.Moreover we show that the expression of this gene is induced by Notch activation through a CSL-dependent mechanism even under conditions of protein synthesis inhibition, with endogenous Notch 1 binding to the IRF6 promoter.Increased IRJF6 expression is necessary for the impact of Notch activation on differentiation markers K1 and Involucrin, and proliferation markers integrins and p63, but not on other "canonical" Notch targets like p21WAF1/Cipl, Hes1 and Hey1. Like Notch 1, IRF6 down-modulates expression of epidermal growth factor receptor (EGFR) as well as two other IRF family members, IRF3 and 7, which we previously linked to positive control of p63 expression. Expression of IRF3, IRF7 and EGFR is enhanced in cutaneous squamous cell carcinomas, illustrating a strikingly opposite pattern compared to Notch and IRF6.Thus, IRF6 is a primary Notch target in keratinocytes, which mediates the effects of this pathway on differentiation and contributes to tumor suppression.

Trinocular System for 3D motion and Dense Stucture Estimation

The relief of the seafloor is an important source of data for many scientists. In this paper we present an optical system to deal with underwater 3D reconstruction. This system is formed by three cameras that take images synchronously in a constant frame rate scheme. We use the images taken by these cameras to compute dense 3D reconstructions. We use Bundle Adjustment to estimate the motion ofthe trinocular rig. Given the path followed by the system, we get a dense map of the observed scene by registering the different dense local reconstructions in a unique and bigger one

Identification of geometrically consistent interest points for 3D scene reconstruction

We propose an algorithm that extracts image features that are consistent with the 3D structure of the scene. The features can be robustly tracked over multiple views and serve as vertices of planar patches that suitably represent scene surfaces, while reducing the redundancy in the description of 3D shapes. In other words, the extracted features will off er good tracking properties while providing the basis for 3D reconstruction with minimum model complexity

Notch1 expression on T cells is not required for CD4+ T helper differentiation.

Notch1 proteins are involved in binary cell fate decisions. To determine the role of Notch1 in the differentiation of CD4(+) Th1 versus Th2 cells, we have compared T helper polarization in vitro in naive CD4(+) T cells isolated from mice in which the N1 gene is specifically inactivated in all mature T cells. Following activation, Notch1-deficient CD4(+) T cells transcribed and secreted IFN-gamma under Th1 conditions and IL-4 under Th2 conditions at levels similar to that of control CD4(+) T cells. These results show that Notch1 is dispensable for the development of Th1 and Th2 phenotypes in vitro. The requirement for Notch1 in Th1 differentiation in vivo was analyzed following inoculation of Leishmania major in mice with a T cell-specific inactivation of the Notch1 gene. Following infection, these mice controlled parasite growth at the site of infection and healed their lesions. The mice developed a protective Th1 immune response characterized by high levels of IFN-gamma mRNA and protein and low levels of IL-4 mRNA with no IL-4 protein in their lymph node cells. Taken together, these results indicate that Notch1 is not critically involved in CD4(+) T helper 1 differentiation and in resolution of lesions following infection with L. major.

A filtering method to correct time-lapse 3D ERT data and improve imaging of natural aquifer dynamics

We have developed a processing methodology that allows crosshole ERT (electrical resistivity tomography) monitoring data to be used to derive temporal fluctuations of groundwater electrical resistivity and thereby characterize the dynamics of groundwater in a gravel aquifer as it is infiltrated by river water. Temporal variations of the raw ERT apparent-resistivity data were mainly sensitive to the resistivity (salinity), temperature and height of the groundwater, with the relative contributions of these effects depending on the time and the electrode configuration. To resolve the changes in groundwater resistivity, we first expressed fluctuations of temperature-detrended apparent-resistivity data as linear superpositions of (i) time series of riverwater-resistivity variations convolved with suitable filter functions and (ii) linear and quadratic representations of river-water-height variations multiplied by appropriate sensitivity factors; river-water height was determined to be a reliable proxy for groundwater height. Individual filter functions and sensitivity factors were obtained for each electrode configuration via deconvolution using a one month calibration period and then the predicted contributions related to changes in water height were removed prior to inversion of the temperature-detrended apparent-resistivity data. Applications of the filter functions and sensitivity factors accurately predicted the apparent-resistivity variations (the correlation coefficient was 0.98). Furthermore, the filtered ERT monitoring data and resultant time-lapse resistivity models correlated closely with independently measured groundwater electrical resistivity monitoring data and only weakly with the groundwater-height fluctuations. The inversion results based on the filtered ERT data also showed significantly less inversion artefacts than the raw data inversions. We observed resistivity increases of up to 10% and the arrival time peaks in the time-lapse resistivity models matched those in the groundwater resistivity monitoring data.

Reproducibility of 3D free-breathing magnetic resonance coronary vessel wall imaging.

AIMS: Although the coronary artery vessel wall can be imaged non-invasively using magnetic resonance imaging (MRI), the in vivo reproducibility of wall thickness measures has not been previously investigated. Using a refined magnetization preparation scheme, we sought to assess the reproducibility of three-dimensional (3D) free-breathing black-blood coronary MRI in vivo. METHODS AND RESULTS: MRI vessel wall scans parallel to the right coronary artery (RCA) were obtained in 18 healthy individuals (age range 25-43, six women), with no known history of coronary artery disease, using a 3D dual-inversion navigator-gated black-blood spiral imaging sequence. Vessel wall scans were repeated 1 month later in eight subjects. The visible vessel wall segment and the wall thickness were quantitatively assessed using a semi-automatic tool and the intra-observer, inter-observer, and inter-scan reproducibilities were determined. The average imaged length of the RCA vessel wall was 44.5+/-7 mm. The average wall thickness was 1.6+/-0.2 mm. There was a highly significant intra-observer (r=0.97), inter-observer (r=0.94), and inter-scan (r=0.90) correlation for wall thickness (all P<0.001). There was also a significant agreement for intra-observer, inter-observer, and inter-scan measurements on Bland-Altman analysis. The intra-class correlation coefficients for intra-observer (r=0.97), inter-observer (r=0.92), and inter-scan (r=0.86) analyses were also excellent. CONCLUSION: The use of black-blood free-breathing 3D MRI in conjunction with semi-automated analysis software allows for reproducible measurements of right coronary arterial vessel-wall thickness. This technique may be well-suited for non-invasive longitudinal studies of coronary atherosclerosis.

Limited genetic diversity and high differentiation among the remnant adder (Vipera berus) populations in the Swiss and French Jura Mountains

Although the adder (Vipera berus) has a large distribution area, this species is particularly threatened in Western Europe due to high habitat fragmentation and human persecution. We developed 13 new microsatellite markers in order to evaluate population structure and genetic diversity in the Swiss and French Jura Mountains, where the species is limited to only a few scattered populations. We found that V. berus exhibits a considerable genetic differentiation among populations (global F-ST = 0.269), even if these are not geographically isolated. Moreover, the genetic diversity within populations in the Jura Mountains and in the less perturbed Swiss Alps is significantly lower than in other French populations, possibly due to post-glacial recolonisation processes. Finally, in order to minimize losses of genetic diversities within isolated populations, suggestions for the conservation of this species in fragmented habitats are proposed.

Aortic vessel wall magnetic resonance imaging at 3.0 Tesla: a reproducibility study of respiratory navigator gated free-breathing 3D black blood magnetic resonance imaging.

The purpose of this study was to evaluate a free-breathing three-dimensional (3D) dual inversion-recovery (DIR) segmented k-space gradient-echo (turbo field echo [TFE]) imaging sequence at 3T for the quantification of aortic vessel wall dimensions. The effect of respiratory motion suppression on image quality was tested. Furthermore, the reproducibility of the aortic vessel wall measurements was investigated. Seven healthy subjects underwent 3D DIR TFE imaging of the aortic vessel wall with and without respiratory navigator. Subsequently, this sequence with respiratory navigator was performed twice in 10 healthy subjects to test its reproducibility. The signal-to-noise (SNR), contrast-to-noise ratio (CNR), vessel wall sharpness, and vessel wall volume (VWV) were assessed. Data were compared using the paired t-test, and the reproducibility of VWV measurements was evaluated using intraclass correlation coefficients (ICCs). SNR, CNR, and vessel wall sharpness were superior in scans performed with respiratory navigator compared to scans performed without. The ICCs concerning intraobserver, interobserver, and interscan reproducibility were excellent (0.99, 0.94, and 0.95, respectively). In conclusion, respiratory motion suppression substantially improves image quality of 3D DIR TFE imaging of the aortic vessel wall at 3T. Furthermore, this optimized technique with respiratory motion suppression enables assessment of aortic vessel wall dimensions with high reproducibility.

The effects of dominance, regular inbreeding and sampling design on Q(ST), an estimator of population differentiation for quantitative traits.

To test whether quantitative traits are under directional or homogenizing selection, it is common practice to compare population differentiation estimates at molecular markers (F(ST)) and quantitative traits (Q(ST)). If the trait is neutral and its determinism is additive, then theory predicts that Q(ST) = F(ST), while Q(ST) > F(ST) is predicted under directional selection for different local optima, and Q(ST) < F(ST) is predicted under homogenizing selection. However, nonadditive effects can alter these predictions. Here, we investigate the influence of dominance on the relation between Q(ST) and F(ST) for neutral traits. Using analytical results and computer simulations, we show that dominance generally deflates Q(ST) relative to F(ST). Under inbreeding, the effect of dominance vanishes, and we show that for selfing species, a better estimate of Q(ST) is obtained from selfed families than from half-sib families. We also compare several sampling designs and find that it is always best to sample many populations (>20) with few families (five) rather than few populations with many families. Provided that estimates of Q(ST) are derived from individuals originating from many populations, we conclude that the pattern Q(ST) > F(ST), and hence the inference of directional selection for different local optima, is robust to the effect of nonadditive gene actions.

Microsatellite markers reveal shallow genetic differentiation between cohorts of the common sea urchin Paracentrotus lividus (Lamarck) in northwest Mediterranean

Temporal variability was studied in the common sea urchin Paracentrotus lividus through the analysis of the genetic composition of three yearly cohorts sampled over two consecutive springs in a locality in northwestern Mediterranean. Individuals were aged using growth ring patterns observed in tests and samples were genotyped for five microsatellite loci. No reduction of genetic diversity was observed relative to a sample of the adult population from the same location or within cohorts across years. FST and amova results indicated that the differentiation between cohorts is rather shallow and not significant, as most variability is found within cohorts and within individuals. This mild differentiation translated into estimates of effective population size of 90100 individuals. When the observed excess of homozygotes was taken into account, the estimate of the average number of breeders increased to c. 300 individuals. Given our restricted sampling area and the known small-scale heterogeneity in recruitment in this species, our results suggest that at stretches of a few kilometres of shoreline, large numbers of progenitors are likely to contribute to the larval pool at each reproduction event. Intercohort variation in our samples is six times smaller than spatial variation between adults of four localities in the western Mediterranean. Our results indicate that, notwithstanding the stochastic events that take place during the long planktonic phase and during the settlement and recruitment processes, reproductive success in this species is high enough to produce cohorts genetically diverse and with little differentiation between them. Further research is needed before the link between genetic structure and underlying physical and biological processes can be well established.

Triiodothyronine stimulation of oligodendroglial differentiation and myelination. A developmental study.

The biochemical development of rotation-mediated aggregating brain cell cultures was studied in a serum-free chemically defined medium in the presence (complete medium) or the absence of triiodothyronine (T3). The expression of 2',3'-cyclic nucleotide 3'-phosphodiesterase (CNP) and myelin basic protein (MBP), two myelin components, was temporally dissociated in brain cell aggregating cultures grown in a complete medium. CNP increased from day 8 and reached a plateau around day 25. MBP accumulated rapidly from the third until the fourth week in culture. The total protein content increased gradually until day 25. The activity of ornithine decarboxylase (ODC) used as an index of cell growth and differentiation, showed two well-defined peaks of activity. The first peak reached a maximum at day 6 and correlated with both the highest DNA content and the peak of [3H]-thymidine incorporation. The second peak of ODC activity (from day 19 to 35) coincided with the differentiation of oligodendrocytes. These results confirm that aggregating fetal rat brain cells cultured in a serum-free chemically defined medium undergo extensive differentiation. Addition of T3 to the culture medium doubled the CNP activity by day 16. In contrast, MBP was only slightly increased by day 16, reaching at 25 and 35 days 8 to 10-fold higher values than the untreated cultures. When T3 was removed between day 16 and 25, CNP decreased almost to control values and MBP failed to accumulate. Moreover, when T3 was reintroduced into the medium (between day 25 and 35), CNP activity was restored and MBP content was partially corrected. T3 treatment produced a concentration-dependent increase in ODC activity which was observed only around day 19. The first peak of ODC activity observed at culture day 6 was independent of the presence of T3. These results obtained in brain cell cultures emphasize the direct effect of T3 on myelination.

The use of 3D planning in facial surgery: Preliminary observations.

Three-dimensional (3D) planning is becoming a more commonly used tool in maxillofacial surgery. At first used only virtually, 3D planning now also enables the creation of useful intraoperative aids such as cutting guides, which decrease the operative difficulty. In our center, we have used 3D planning in various domains of facial surgery and have investigated the advantages of this technique. We have also addressed the difficulties associated with its use. 3D planning increases the accuracy of reconstructive surgery, decreases operating time, whilst maintaining excellent esthetic results. However, its use is restricted to osseous reconstruction at this stage and once planning has been undertaken, it cannot be reversed or altered intraoperatively. Despite the attractive nature of this new tool, its uses and practicalities must be further evaluated. In particular, cost-effectiveness, hospital stay, and patient perceived benefits must be assessed.