Territorial Strategic Planning as a support instrument for Regional and Local Development: a comparative analysis between Lisbon and Barcelona Metropolitan Areas

MARQUES, B.P. (2011) "Territorial Strategic Planning as a support instrument for Regional and Local Development: a comparative analysis between Lisbon and Barcelona Metropolitan Areas", in Atas do 17.º Congresso da APDR, do 5.º Congresso de Gestão e Conservação da Natureza e do Congresso Internacional da APDR/AECR, Bragança e Zamora, pp. 1265-1272, ISBN 978-989-96353-2-6.

Portuguese Ministers, 1851-1999: Social Background and Paths to Power

Disponível em: http://193.136.113.6/Opac/Pages/Search/Results.aspx?SearchText=UID=bb8aa8d5-c6b6-466a-81bb-fe8a67693cee&DataBase=10449_UNLFCSH

From Strategic Planning to Development Initiatives: a first reflection on the situation of Lisbon and Barcelona

MARQUES, B.P. (2014) From Strategic Planning to Development Initiatives: a first reflection on the situation of Lisbon and Barcelona, in 20th APDR Congress Proceddings, APDR and UÉvora, Évora, pp. 850-857, ISBN 978-989-8780-01-0.

Amorphous silicon e 3D sensors applied to object detection

Nowadays, existing 3D scanning cameras and microscopes in the market use digital or discrete sensors, such as CCDs or CMOS for object detection applications. However, these combined systems are not fast enough for some application scenarios since they require large data processing resources and can be cumbersome. Thereby, there is a clear interest in exploring the possibilities and performances of analogue sensors such as arrays of position sensitive detectors with the final goal of integrating them in 3D scanning cameras or microscopes for object detection purposes. The work performed in this thesis deals with the implementation of prototype systems in order to explore the application of object detection using amorphous silicon position sensors of 32 and 128 lines which were produced in the clean room at CENIMAT-CEMOP. During the first phase of this work, the fabrication and the study of the static and dynamic specifications of the sensors as well as their conditioning in relation to the existing scientific and technological knowledge became a starting point. Subsequently, relevant data acquisition and suitable signal processing electronics were assembled. Various prototypes were developed for the 32 and 128 array PSD sensors. Appropriate optical solutions were integrated to work together with the constructed prototypes, allowing the required experiments to be carried out and allowing the achievement of the results presented in this thesis. All control, data acquisition and 3D rendering platform software was implemented for the existing systems. All these components were combined together to form several integrated systems for the 32 and 128 line PSD 3D sensors. The performance of the 32 PSD array sensor and system was evaluated for machine vision applications such as for example 3D object rendering as well as for microscopy applications such as for example micro object movement detection. Trials were also performed involving the 128 array PSD sensor systems. Sensor channel non-linearities of approximately 4 to 7% were obtained. Overall results obtained show the possibility of using a linear array of 32/128 1D line sensors based on the amorphous silicon technology to render 3D profiles of objects. The system and setup presented allows 3D rendering at high speeds and at high frame rates. The minimum detail or gap that can be detected by the sensor system is approximately 350 μm when using this current setup. It is also possible to render an object in 3D within a scanning angle range of 15º to 85º and identify its real height as a function of the scanning angle and the image displacement distance on the sensor. Simple and not so simple objects, such as a rubber and a plastic fork, can be rendered in 3D properly and accurately also at high resolution, using this sensor and system platform. The nip structure sensor system can detect primary and even derived colors of objects by a proper adjustment of the integration time of the system and by combining white, red, green and blue (RGB) light sources. A mean colorimetric error of 25.7 was obtained. It is also possible to detect the movement of micrometer objects using the 32 PSD sensor system. This kind of setup offers the possibility to detect if a micro object is moving, what are its dimensions and what is its position in two dimensions, even at high speeds. Results show a non-linearity of about 3% and a spatial resolution of < 2µm.

The role of deposit insurance and bank’s asset size in the 2008 financial crisis

In this paper we analyze the role of deposit insurance in providing the market with liquidity in times of financial turmoil. To do so, we look at the variation in insured and uninsured deposits between 2005Q3 and 2011Q3, controlling for liquidity, solvency and capital adequacy indicators, and find evidence that deposit insurance does provide some confidence in keeping funds in banks in times of turmoil. Additionally we follow an event study methodology to assess the impact of deposit insurance oriented policies on bank holding companies stock market returns, and find a TBTF effect.

Spatial distribution of disseminated histoplasmosis and AIDS co-infection in an endemic area of Northeastern Brazil

Abstract: INTRODUCTION: The spatial distribution of disseminated histoplasmosis (DH) and acquired immunodeficiency syndrome (AIDS) co-infection in adult residents of Fortaleza, Ceará, Brazil was evaluated. METHODS: Socio-demographic data for the DH/AIDS cases were obtained from a reference hospital, and socio-environmental indicators were obtained from an official Brazilian institute. Kernel analysis and local indicators of spatial autocorrelation (LISA) cluster maps were used to estimate the case density within the city. RESULTS: DH/AIDS cases were concentrated in the Northwestern and Southwestern peripheral areas of the city, related with low human development indices, but different from AIDS cases distribution. CONCLUSION: Risk factors other than AIDS infection must affect histoplasmosis development in this area.

Decisions of technology innovation: the role of indicators

This work presents research conducted to understand the role of indicators in decisions of technology innovation. A gap was detected in the literature of innovation and technology assessment about the use and influence of indicators in this type of decision. It was important to address this gap because indicators are often frequent elements of innovation and technology assessment studies. The research was designed to determine the extent of the use and influence of indicators in decisions of technology innovation, to characterize the role of indicators in these decisions, and to understand how indicators are used in these decisions. The latter involved the test of four possible explanatory factors: the type and phase of decision, and the context and process of construction of evidence. Furthermore, it focused on three Portuguese innovation groups: public researchers, business R&D&I leaders and policymakers. The research used a combination of methods to collect quantitative and qualitative information, such as surveys, case studies and social network analysis. This research concluded that the use of indicators is different from their influence in decisions of technology innovation. In fact, there is a high use of indicators in these decisions, but lower and differentiated differences in their influence in each innovation group. This suggests that political-behavioural methods are also involved in the decisions to different degrees. The main social influences in the decisions came mostly from hierarchies, knowledge-based contacts and users. Furthermore, the research established that indicators played mostly symbolic roles in decisions of policymakers and business R&D&I leaders, although their role with researchers was more differentiated. Indicators were also described as helpful instruments to conduct a reasonable interpretation of data and to balance options in innovation and technology assessments studies, in particular when contextualised, described in detail and with discussion upon the options made. Results suggest that there are four main explanatory factors for the role of indicators in these decisions: First, the type of decision appears to be a factor to consider when explaining the role of indicators. In fact, each type of decision had different influences on the way indicators are used, and each type of decision used different types of indicators. Results for policy-making were particularly different from decisions of acquisition and development of products/technology. Second, the phase of the decision can help to understand the role indicators play in these decisions. Results distinguished between two phases detected in all decisions – before and after the decision – as well as two other phases that can be used to complement the decision process and where indicators can be involved. Third, the context of decision is an important factor to consider when explaining the way indicators are taken into consideration in policy decisions. In fact, the role of indicators can be influenced by the particular context of the decision maker, in which all types of evidence can be selected or downplayed. More importantly, the use of persuasive analytical evidence appears to be related with the dispute existent in the policy context. Fourth and last, the process of construction of evidence is a factor to consider when explaining the way indicators are involved in these decisions. In fact, indicators and other evidence were brought to the decision processes according to their availability and capacity to support the different arguments and interests of the actors and stakeholders. In one case, an indicator lost much persuasion strength with the controversies that it went through during the decision process. Therefore, it can be argued that the use of indicators is high but not very influential; their role is mostly symbolic to policymakers and business decisions, but varies among researchers. The role of indicators in these decisions depends on the type and phase of the decision and the context and process of construction of evidence. The latter two are related to the particular context of each decision maker, the existence of elements of dispute and controversies that influence the way indicators are introduced in the decision-making process.

Improving selective collection of urban waste using a business intelligence system

Today recovering urban waste requires effective management services, which usually imply sophisticated monitoring and analysis mechanisms. This is essential for the smooth running of the entire recycling process as well as for planning and control urban waste recovering. In this paper we present a business intelligence system especially designed and im- plemented to support regular decision-making tasks on urban waste management processes. The system provides a set of domain-oriented analytical tools for studying and characterizing poten- tial scenarios of collection processes of urban waste, as well as for supporting waste manage- ment in urban areas, allowing for the organization and optimization of collection services. In or- der to clarify the way the system was developed and the how it operates, particularly in process visualization and data analysis, we also present the organization model of the system, the ser- vices it disposes, and the interface platforms for exploring data.

Nesting and neonates of the yellow-spotted river turtle (Podocnemis unifilis, Podocnemididae) in the Araguari River basin, eastern Amazon, Brazil

Predation and alteration of microhabitats may represent high risk for nesting of Amazonian turtles. This study aimed at investigating the nesting and body parameters of neonates of Podocnemis unifilis in the Araguari River basin, State of Amapá, Brazil. The spawning sites of this turtle were monitored along the Falsino River (a region with two reserves) and in the urban area of the Porto Grande city along the Araguari River, from August to December 2011. A total of 180 nests were found and the nesting occurred from September to November, with prevalence in October. Eggs hatching occurred in December. The mean incubation period was 63.5 ± 5.2 days and the eggs hatching success was 25%. However, approximately 80% of the nests had suffered predation mainly by humans, which occurred in both the protected areas of the reserves and the urban area. The pattern of nesting site choice was discussed. Egg size was larger than that previously described for the same turtle species in the other regions. The body condition index of neonates indicated a good use of vitelline reserves. The results indicate the urgent need for strategic actions to conserve and maintain the natural stocks of this relatively vulnerable turtle in the region.

Lipid profile and cardiovascular risk in two Amazonian populations

OBJECTIVE: To compare the lipid profiles and coronary heart disease risks of 2 Brazilian Amazonian populations as follows: a riverside population (village of Vigia) and an urban population (city of Belém in the state of Pará). METHODS: Fifty individuals controlled for age and sex were assessed in each region, and the major risk factors for coronary heart disease were analyzed. RESULTS: According to the National Cholesterol Education Program (NCEP III) and using the Framingham score, both populations had the same absolute risk of events (Vigia = 5.4 ± 1 vs Belém = 5.7 ± 1), although the population of Vigia had a lower consumption of saturated fat (P<0.0001), a greater consumption of mono- and polyunsaturated fat (P<0.03), in addition to lower values for body mass index (25.4± 0.6 vs 27.6 ± 0.7 kg/m², P<0.02), of biceps skin fold (18.6 ± 1.1 vs 27.5 ± 1.3 mm, P<0.0001), of triceps skin fold (28.7 ± 1.2 vs 37.3 ± 1.7 mm, P<0.002), and of total cholesterol (205 ± 5 vs 223 ± 6 mg/dL, P< 0.03) and triglycerides (119 ± 9 vs 177 ± 18 mg/dL, P<0.005). Both populations did not differ in regard to HDL-C (46 ± 1 vs 46 ± 1 mg/dL), LDL-C (135 ± 4 vs 144 ± 5 mg/dL) and blood pressure (SBP 124 ± 3 vs 128 ± 3 mmHg; DBP 80 ± 2 vs 82 ± 2 mmHg). CONCLUSION: The riverside and urban populations of Amazonia had similar cardiovascular risks. However, the marked difference in the variables studied suggests that different strategies of prevention should be applied.

Privatization and competition in the delivery of local services: An empirical examination of the dual market hypothesis

This paper empirically analyses the hypothesis of the existence of a dual market for contracts in local services. Large firms that operate on a national basis control the contracts for delivery in the most populated and/or urban municipalities, whereas small firms that operate at a local level have the contracts in the least populated and/or rural municipalities. The dual market implies the high concentration and dominance of major firms in large municipalities, and local monopolies in the smaller ones. This market structure is harmful to competition for the market as the effective number of competitors is low across all municipalities. Thus, it damages the likelihood of obtaining cost savings from privatization.

Interlinkages and forecasting made possible by the use of the DECOIN analytical tool kit

This technical report is a document prepared as a deliverable [D4.3 Report of the Interlinkages and forecasting prototype tool] of a EU project – DECOIN Project No. 044428 - FP6-2005-SSP-5A. The text is divided into 4 sections: (1) this short introductory section explains the purpose of the report; (2) the second section provides a general discussion of a systemic problem found in existing quantitative analysis of sustainability. It addresses the epistemological implications of complexity, which entails the need of dealing with the existence of Multiple-Scales and non-equivalent narratives (multiple dimensions/attributes) to be used to define sustainability issues. There is an unavoidable tension between a “steady-state view” (= the perception of what is going on now – reflecting a PAST --& PRESENT view of the reality) versus an “evolutionary view” (= the unknown transformation that we have to expect in the process of becoming of the observed reality and in the observer – reflecting a PRESENT --& FUTURE view of the reality). The section ends by listing the implications of these points on the choice of integrated packages of sustainability indicators; (3) the third section illustrates the potentiality of the DECOIN toolkit for the study of sustainability trade-offs and linkages across indicators using quantitative examples taken from cases study of another EU project (SMILE). In particular, this section starts by addressing the existence of internal constraints to sustainability (economic versus social aspects). The narrative chosen for this discussion focuses on the dark side of ageing and immigration on the economic viability of social systems. Then the section continues by exploring external constraints to sustainability (economic development vs the environment). The narrative chosen for this discussion focuses on the dark side of current strategy of economic development based on externalization and the “bubbles-disease”; (4) the last section presents a critical appraisal of the quality of energy data found in energy statistics. It starts with a discussion of the general goal of statistical accounting. Then it introduces the concept of multipurpose grammars. The second part uses the experience made in the activities of the DECOIN project to answer the question: how useful are EUROSTAT energy statistics? The answer starts with an analysis of basic epistemological problems associated with accounting of energy. This discussion leads to the acknowledgment of an important epistemological problem: the unavoidable bifurcations in the mechanism of accounting needed to generate energy statistics. By using numerical example the text deals with the following issues: (i) the pitfalls of the actual system of accounting in energy statistics; (ii) a critical appraisal of the actual system of accounting in BP statistics; (iii) a critical appraisal of the actual system of accounting in Eurostat statistics. The section ends by proposing an innovative method to represent energy statistics which can result more useful for those willing develop sustainability indicators.

The WHO Collaborating Centre for Research and Control of Schistosomiasis at Niamey, Niger

The Centre de Recherche sur les Méningites et les Schistosomes (CERMES) is a research institute depending on the Organisation de Coordination et de Coopération pour la lutte contre les Grandes Endémies - a West African Organization for Public Health - devoted to the studies on schistosomiasis and meningitis. The staff includes 32 persons with 11 scientists and one financial officer. The activities of the CERMES involving schistosomiasis concern three research units: (a) ecology of human and animal schistosomiasis transmission; the CERMES defined the different patterns of schistosomiasis transmission in Niger (involving African dry savana); in this field, we have shown, (i) the existence of important variability in conditions of transmission of S. haematobium and, (ii) natural hybridization between parasitic species of the ruminants (S. bovis and S. curassoni) and genetic interaction between human and animal parasites; (b) definition of morbidity indicators usable for rapid assessment methods, for appraisal of the severity of the disease and for the evaluation of the efficiency of control methods; we have established the correlation between ultrasonographic data and some cheap and simple field indicators; (c) immune response and protective immunity induced by recombinant glutathion S-transferase (Sm28, Sb28 and Sh28) in homologous and heterologous animal models including goats, sheep and non human primates (Erythrocebus patas). In Niger, we participate in all control programs against schistosomiasis to define control strategies, to supervise operations and to participate in their evaluation with external experts. International collaborations constitute a frame including four laboratories in Africa and six laboratories in developed countries (Europe and USA)

Comparability of clinical wear measurements by optical 3D laser scanning in two different centers.

OBJECTIVE: The purpose of this study was to compare the use of different variables to measure the clinical wear of two denture tooth materials in two analysis centers. METHODS: Twelve edentulous patients were provided with full dentures. Two different denture tooth materials (experimental material and control) were placed randomly in accordance with the split-mouth design. For wear measurements, impressions were made after an adjustment phase of 1-2 weeks and after 6, 12, 18, and 24 months. The occlusal wear of the posterior denture teeth of 11 subjects was assessed in two study centers by use of plaster replicas and 3D laser-scanning methods. In both centers sequential scans of the occlusal surfaces were digitized and superimposed. Wear was described by use of four different variables. Statistical analysis was performed after log-transformation of the wear data by use of the Pearson and Lin correlation and by use of a mixed linear model. RESULTS: Mean occlusal vertical wear of the denture teeth after 24 months was between 120μm and 212μm, depending on wear variable and material. For three of the four variables, wear of the experimental material was statistically significantly less than that of the control. Comparison of the two study centers, however, revealed correlation of the wear variables was only moderate whereas strong correlation was observed among the different wear variables evaluated by each center. SIGNIFICANCE: Moderate correlation was observed for clinical wear measurements by optical 3D laser scanning in two different study centers. For the two denture tooth materials, wear measurements limited to the attrition zones led to the same qualitative assessment.

Generación de visitas virtuales a museos 3D para la inclusión en páginas web

Las páginas web junto a la animación 3D son dos grandes atractivos hoy en día en el mundo de Internet. Una interfaz web agradable e interactiva por la que navegar cómodamente; junto a una herramienta en dos dimensiones fácil de manejar, para diseñar y obtener un resultado en tres dimensiones. Esas han sido las bases de mi aplicación, la cual consiste en una página web dedicada al arte, donde cualquier persona podrá registrarse y dibujar mediante una paleta cómo sería un museo a su gusto. Visitando el museo virtual resultante, donde admirar las obras junto a su autor y título.