Flow Investigation of Linear Cluster Plug Nozzle

Computational and experimental tools have been used to understand the linear cluster plug nozzle flowfield for a range of pressure ratios. The experimental cluster configuration is arrived at from a linear plug nozzle by introducing splitter plates in the primary nozzle, and computational analysis of corresponding geometry is also carried out. The flow development on the plug surface has been analyzed for two different cluster module spacings. The interactions between the cluster module jets is a complex one with a three-dimensional shock structure because of the differential end condition the shock experiences on the plug wall and freejet boundary. A prominent streamwise vorticity resulting from curvature of the shock is also seen along the length of the plug downstream of the module junctions. The out-of-phase wave interactions occurring along the module centerline and the splitter plate centerline, resulting in a wavy surface-limiting streamline pattern, particularly at lower pressure ratios, is explained.

A Novel Approach for Multispectral Satellite Image Classification Based on the Bat Algorithm

Among the multiple advantages and applications of remote sensing, one of the most important uses is to solve the problem of crop classification, i.e., differentiating between various crop types. Satellite images are a reliable source for investigating the temporal changes in crop cultivated areas. In this letter, we propose a novel bat algorithm (BA)-based clustering approach for solving crop type classification problems using a multispectral satellite image. The proposed partitional clustering algorithm is used to extract information in the form of optimal cluster centers from training samples. The extracted cluster centers are then validated on test samples. A real-time multispectral satellite image and one benchmark data set from the University of California, Irvine (UCI) repository are used to demonstrate the robustness of the proposed algorithm. The performance of the BA is compared with two other nature-inspired metaheuristic techniques, namely, genetic algorithm and particle swarm optimization. The performance is also compared with the existing hybrid approach such as the BA with K-means. From the results obtained, it can be concluded that the BA can be successfully applied to solve crop type classification problems.

Effect of particle size of sand and surface asperities of reinforcement on their interface shear behaviour

This paper investigates the effect of particle size of sand and the surface asperities of reinforcing material on their interlocking mechanism and its influence on the interfacial shear strength under direct sliding condition. Three sands of different sizes with similar morphological characteristics and four different types of reinforcing materials with different surface features were used in this study. Interface direct shear tests on these materials were performed in a specially developed symmetric loading interface direct shear test setup. Morphological characteristics of sand particles were determined from digital image analysis and the surface roughness of the reinforcing materials was measured using an analytical expression developed for this purpose. Interface direct shear tests at three different normal stresses were carried out by shearing the sand on the reinforcing material fixed to a smooth surface. Test results revealed that the peak interfacial friction and dilation angles are hugely dependent upon the interlocking between the sand particles and the asperities of reinforcing material, which in turn depends on the relative size of sand particles and asperities. Asperity ratio (AS/D-50) of interlocking materials, which is defined as the ratio of asperity spacing of the reinforcing material and the mean particle size of sand was found to govern the interfacial shear strength with highest interfacial strength measured when the asperity ratio was equal to one, which represents the closest fitting of sand particles into the asperities. It was also understood that the surface roughness of the reinforcing material influences the shear strength to an extent, the influence being more pronounced in coarser particles. Shear bands in the interface shear tests were analysed through image segmentation technique and it was observed that the ratio of shear band thickness (t) to the median particle size (D-50) was maximum when the AS/D-50 was equal to one. (C) 2015 Elsevier Ltd. All rights reserved.

Explicit and Unique Construction of Tetrablock Unitary Dilation in a Certain Case

Consider the domain E in defined by This is called the tetrablock. This paper constructs explicit boundary normal dilation for a triple (A, B, P) of commuting bounded operators which has as a spectral set. We show that the dilation is minimal and unique under a certain natural condition. As is well-known, uniqueness of minimal dilation usually does not hold good in several variables, e.g., Ando's dilation is known to be not unique, see Li and Timotin (J Funct Anal 154:1-16, 1998). However, in the case of the tetrablock, the third component of the dilation can be chosen in such a way as to ensure uniqueness.

Acoustic Emission Experiments of Rock Failure under Load Simulating the Hypocenter Condition

A series of acoustic emission (AE) experiments of rock failure have been conducted under cyclic load in tri-axial stress tests. To simulate the hypocenter condition the specimens are loaded by the combined action of a constant stress, intended to simulate

Two-Phase Flow In Fuel Cells In Short-Term Microgravity Condition

A visual observation of liquid-gas two-phase flow in anode channels of a direct methanol proton exchange membrane fuel cells in microgravity has been carried out in a drop tower. The anode flow bed consisted of 2 manifolds and 11 parallel straight channels. The length, width and depth of single channel with rectangular cross section was 48.0 mm, 2.5 mm and 2.0 mm, respectively. The experimental results indicated that the size of bubbles in microgravity condition is bigger than that in normal gravity. The longer the time, the bigger the bubbles. The velocity of bubbles rising is slower than that in normal gravity because buoyancy lift is very weak in microgravity. The flow pattern in anode channels could change from bubbly flow in normal gravity to slug flow in microgravity. The gas slugs blocked supply of reactants from channels to anode catalyst layer through gas diffusion layer. When the weakened mass transfer causes concentration polarization, the output performance of fuel cells declines.

Occurrence of sorghum midge stenodiplosis sorghicola (Coq,) during the second crop growing season on the pacific coastal plain of Nicaragua

La mosquita de la panojas del sorgo, Stenediplosls sorghicola (Coq.) es una de las plagas mas importantes que atacan al sorgo en Nicaragua. Varios estudios fueron conducidos en el pacifico de Nicaragua durante 1998 y 1999 para determinar hospederos y la actividad de esta plaga durante la segunda fecha de siembra de este cultivo (Postrera). Hembras oviposltaron en sorgo desde mediados de Septiembre hasta los últimos dfas de Diciembre. Cuando sorgo no se encontraba presente, hembras ovipositaron en sorgo escobero, Sorghum bicolor (L.) o pastoJonson, Sorghum halepense L. Pasto Jonson florea durante todo el ano y puede servir como hospedero mientras las otras especies de sorghum no se encuentran en el campo. Cuando estos tres hospederos estaban floreando al mismo tiempo, las hembras exhibieron una fuerte preferencia para ovlpositar en sorgo. Basado en estas observaciones la mosquita de la panoja del sorgo puede estar activa durante todo el ano en el pacifico de Nicaragua. Conocimiento de la ocurrencia y comportamiento de la mosquita en el area, es muy Importante para el desarrollo de estrategias de manejo de esta plaga.

Effect of Surface Condition of Electrode on the Surface Melting of Material by Laser-Guided Micro-Arc Discharge

This paper studies the surface melting in the atmosphere by YAG laser-guided micro-arc discharge. In three kinds of surface conditions (free, oiled, and polyethylene covered), we try to control the diameter and the power density of discharge pit. It is found that the power density of 3 x 10(6) W/cm(2) of discharge pit on the oiled surface is moderate to form the melted layer thicker than that of the others, adapting to strengthen the surface of material, and the power density of 1.07 x 10(7) W/cm(2) of discharge pit on the polyethylene-covered surface is highest to form the deepest discharge pit among them, adapting to remove the material.

A field model interpretation of crack initiation and growth behavior in ferroelectric ceramics: change of poling direction and boundary condition

Strain energy density expressions are obtained from a field model that can qualitatively exhibit how the electrical and mechanical disturbances would affect the crack growth behavior in ferroelectric ceramics. Simplification is achieved by considering only three material constants to account for elastic, piezoelectric and dielectric effects. Cross interaction of electric field (or displacement) with mechanical stress (or strain) is identified with the piezoelectric effect; it occurs only when the pole is aligned normal to the crack. Switching of the pole axis by 90degrees and 180degrees is examined for possible connection with domain switching. Opposing crack growth behavior can be obtained when the specification of mechanical stress sigma(infinity) and electric field E-infinity or (sigma(infinity), E-infinity) is replaced by strain e and electric displacement D-infinity or (epsilon(infinity), D-infinity). Mixed conditions (sigma(infinity),D-infinity) and (epsilon(infinity),E-infinity) are also considered. In general, crack growth is found to be larger when compared to that without the application of electric disturbances. This includes both the electric field and displacement. For the eight possible boundary conditions, crack growth retardation is identified only with (E-y(infinity),sigma(y)(infinity)) for negative E-y(infinity) and (D-y(infinity), epsilon(y)(infinity)) for positive D-y(infinity) while the mechanical conditions sigma(y)(infinity) or epsilon(y)infinity are not changed. Suitable combinations of the elastic, piezoelectric and dielectric material constants could also be made to suppress crack growth. (C) 2002 Published by Elsevier Science Ltd.

Compact difference approximation with consistent boundary condition

For simulating multi-scale complex flow fields it should be noted that all the physical quantities we are interested in must be simulated well. With limitation of the computer resources it is preferred to use high order accurate difference schemes. Because of their high accuracy and small stencil of grid points computational fluid dynamics (CFD) workers pay more attention to compact schemes recently. For simulating the complex flow fields the treatment of boundary conditions at the far field boundary points and near far field boundary points is very important. According to authors' experience and published results some aspects of boundary condition treatment for far field boundary are presented, and the emphasis is on treatment of boundary conditions for the upwind compact schemes. The consistent treatment of boundary conditions at the near boundary points is also discussed. At the end of the paper are given some numerical examples. The computed results with presented method are satisfactory.

Potencial de mercado del queso de cabra, en el distrito cinco, Managua en el período 2012-2016

La presente investigación se llevó a cabo con el objetivo de analizar el ootencial de mercado del queso de cabra, en el distrito V Managua en el periodo 2012-2016. La investigación es de tipo descriptiva, en el cual se utilizó como instrumento un cuestionario y la técnica aplicada fue la encuesta dirigida a consumidores y entrevista a distribuidores de queso de cabra, se logró conocer la oferta y demanda actual y potencial de este producto, los datos obtenidos se procesaron en el programa estadístico SPSS V.22, la población que se tomó en cuenta fue de 136, 219 habitantes de distrito Nº 5 y la muestra fue seleccionada tomando un 95 % confianza y un 5% de error la muestra fue de 202 elementos se les aplico la encuesta y se lograron los siguientes resultados, 31 personas actualmente consumen este producto y las cantidades de queso de cabra más demandadas son en presentaciones de 70 gramos y 100 gramos, este producto es demandado principalmente por personas procedentes de otros países pero nacionalizados en Nicaragua o que han salido del país por un largo tiempo y se han adaptado a la cultura de acompañar sus comidas con queso de cabra los cuales compran este producto con una frecuencia que se comprende en forma quincenal y ocasional, para esta última le asign amos un periodo de tres meses. Esta información permite concluir que existe demanda del queso de cabra, pero poca oferta del queso de cabra en el distrito V Managua. Los canales de comercialización más usados son el canal nivel 0, y el canal nivel 1 esto se debe a se reducen costos al comercializar el producto. Se estimaron los márgenes de comercialización para las presentaciones de 70 gramos el productor obtiene el 29.6% de ganancias y para las presentaciones de 100 gramos se logra un 26.43% de ganancias del precio final pagado por el consumidor. El queso de cabra está dirigido a personas de alto poder adquisitivo debido a que este producto tiene alto precio y comúnmente se encuentra ofertado en supermercados y tiendas delicatesen, además estos consumidores asumieron la cultura de consumir, y pagan altos precios por el producto ya que la demanda es mucha, pero la oferta debido a muchos problemas en la comercialización y producción reduce la oferta.

Effects of preceding crop and weed control method on weeds and common bean (Phaseoulus vulgaris L.) yield in a no-tillage cropping system

En 1994, se inició un trabajo de investigación el cual se continuo durante tres años, con el objetivo de evaluar el efecto de cultivos antecesores y métodos de control de malezas sobre el rendimiento frijol común ( P h a s e o l u s vulgaris L.) y la dinámica de las malezas. El frijol y los cultivos antecesores fueron sembrados en sistema de cero labranza. Las secuencias de cultivos estudiadas fueron: maíz (Zea mays L), seguido de frijol y frijol seguido de frijol. Se analizaron tres ciclos de los cultivos (1994, 1995 y 1996). La secuencia de cultivo que produjo el máximo rendimiento fue maíz seguido de frijol en 1994, así como también el promedio de rendimiento a través de los años. Por otro lado, los mayores valores de vainas por planta y semillas por vaina se obtuvieron cuando el frijol antecedió al frijol en 1994. Parcelas con controles de malezas mecánico y químico obtuvieron menores densidades y peso seco de malezas y mejores rendimientos que aquellas parcelas en las cuales se controlo la maleza a través de cobertura muerta.

One-dimensional improvement and two-dimensional and 3-dimensional treatments for stable oscillation condition, mode structure and power output in high-speed-flow lasers

For high-speed-flow lasers, the one-dimensional and first-order approximate treatment in[1] under approximation of geometrical optics is improved still within the scope of approx-imation of geometrical optics. The strict accurate results are obtained, and what is more,two- and three-dimensional treatments are done. Thus for two- and three-dimensional cases, thestable oscillation condition, the formulae of power output and analytical expression of modesunder approximation of geometrical optics (in terms of gain function) are derived. Accord-ing to the present theory, one-and two-dimensional calculations for the typical case of Gerry'sexperiment are presented. All the results coincide well with the experiment and are better thanthe results obtained in [1].In addition, the applicable scope of Lee's stable oscillation condition given by [1] is ex-panded; the condition for the approximation of gcometrical optics to be applied to mode con-structure in optical cavity is obtained for the first time and the difference between thiscondition and that for free space is also pointed out in the present work.