Experience with a low-cost telemedicine system in three developing countries

The Swinfen Charitable Trust was established in 1998 with the aim of helping the poor, sick and disabled in the developing world. It does this by setting up simple telemedicine links based on email to support doctors in isolated hospitals. The first telemedicine link was established to support the lone orthopaedic surgeon at the Centre for the Rehabilitation of the Paralysed (CRP) in Savar, near Dhaka in Bangladesh, in July 1999. An evaluation of the 27 referrals made during the first year of operation showed that the telemedical advice had been useful and cost-effective. Based on the success of the Bangladesh project, the Swinfen Charitable Trust supplied: digital cameras and tripods to more hospitals in other developing countries. These are Patan Hospital in Nepal (March 2000), Gizo Hospital in the Solomon Islands (March 2000), Helena Goldie Hospital: on New Georgia in the Solomon Islands (September 2000) and LAMB Hospital in Bangladesh (September 2000).

Lucerne biology and genetic improvement - an analysis of past activities and future goals in Australia

Breeding methodologies for cultivated lucerne (Medicago sativa L.), an autotetraploid, have changed little over the last 50 years, with reliance on polycross methods and recurrent phenotypic selection. There has been, however, an increase in our understanding of lucerne biology, in particular the genetic relationships between members of the M. sativa complex, as deduced by DNA analysis. Also, the differences in breeding behaviour and vigour of diploids versus autotetraploids, and the underlying genetic causes, are discussed in relation to lucerne improvement. Medicago falcata, a member of the M. sativa complex, has contributed substantially to lucerne improvement in North America, and its diverse genetics would appear to have been under-utilised in Australian programs over the last two decades, despite the reduced need for tolerance to freezing injury in Australian environments. Breeding of lucerne in Australia only commenced on a large scale in 1977, driven by an urgent need to introgress aphid resistance into adapted backgrounds. The release in the early 1980s of lucernes with multiple pest and disease resistance (aphids, Phytophthora, Colletotrichum) had a significant effect on increasing lucerne productivity and persistence in eastern Australia, with yield increases under high disease pressure of up to 300% being recorded over the predominant Australian cultivar, up to 1977, Hunter River. Since that period, irrigated lucerne yields have plateaued, highlighting the need to identify breeding objectives, technologies, and the germplasm that will create new opportunities for increasing performance. This review discusses major goals for lucerne improvement programs in Australia, and provides indications of the germplasm sources and technologies that are likely to deliver the desired outcomes.

Nucleation, growth and breakage phenomena in agitated wet granulation processes: a review

Wet agglomeration processes have traditionally been considered an empirical art, with great difficulties in predicting and explaining observed behaviour. Industry has faced a range of problems including large recycle ratios, poor product quality control, surging and even the total failure of scale up from laboratory to full scale production. However, in recent years there has been a rapid advancement in our understanding of the fundamental processes that control granulation behaviour and product properties. This review critically evaluates the current understanding of the three key areas of wet granulation processes: wetting and nucleation, consolidation and growth, and breakage and attrition. Particular emphasis is placed on the fact that there now exist theoretical models which predict or explain the majority of experimentally observed behaviour. Provided that the correct material properties and operating parameters are known, it is now possible to make useful predictions about how a material will granulate. The challenge that now faces us is to transfer these theoretical developments into industrial practice. Standard, reliable methods need to be developed to measure the formulation properties that control granulation behaviour, such as contact angle and dynamic yield strength. There also needs to be a better understanding of the flow patterns, mixing behaviour and impact velocities in different types of granulation equipment. (C) 2001 Elsevier Science B.V. All rights reserved.

Behaviour of older people admitted for residential respite care

The aim of this pilot study was to determine whether residential respite care is used because of disruptive behaviour displayed by older people. The specific objectives were to 1) characterise older people being admitted for residential respite care, 2) obtain a preliminary estimate of the proportion of older people in residential respite care because of disruptive behaviour, and, 3) examine the relationship between residential respite care and disruptive behaviour. A quantitative approach using a cross-sectional survey was employed. The respite recipients were 35 older people with a mean age of 81.5 years (range 67-96 years). The respite recipients had been admitted for residential respite care to aged care hostels and nursing homes in a provincial city and its surrounding rural area. Nurses rated disruptive behaviour using the Dementia Behavior Disturbance Scale (DBDS). Additional reliability data for the DBDS are provided. The study found that the largest specific group of residential respite care users were widows (31.4%) who lived alone in their own home. The reason for over half (51.4%) of the residential respite admissions was to give a carer a 'break' from the older person. Although a large proportion (80%) of respite recipients were rated as having disruptive behaviour, the proportion of admissions because of disruptive behaviour was much less (28.6%). People with dementia (37.1%) scored significantly higher than people without dementia on the DBDS [F (1,33)=15.57, p

The differential role of alcohol expectancies, drinking refusal self-efficacy and coping resources in predicting alcohol consumption in community and clinical samples

This study explored the relationship between coping, alcohol expectancies and drinking refusal self-efficacy in predicting drinking behaviour in both community and clinical samples. These variables were found to have differential effects in their association with frequency and volume of alcohol consumption across the two samples. Generally, drinking refusal self-efficacy was a more salient factor in relation to frequency and volume of community drinking, while coping and expectancies were more strongly associated with frequency of drinking sessions by problem drinkers. The interaction between expectancies and drinking refusal self-efficacy was related to volume of consumption in both groups, while coping and expectancies interacted in their association with frequency in the clinical group. The findings are discussed with regard to the different patterns of cognitive variables governing the decision to drink and the amount consumed in each drinking session, which may differentiate community and problem drinkers.

The tourism-leisure behavioural continuum

Tourism and leisure have historically been studied in isolation, but recent researchers attempt to understand the relationship between them. However, there have been few comparisons of how people behave in their environments. This paper provides a conceptual model of the relationship based oil a critical review of the current literature oil pleasure-oriented environments. The model indicates that despite potential differences in observable behavior, there is a commonality between the underlying influences that define how people behave during their leisure and tourism experiences. Therefore, the paper concludes that these should not be regarded as separate phenomenon. (C) 2002 Elsevier Science Ltd. All Lights reserved.

Strange bedfellows: Green Hill Fort, archaeology and tourism

Green Hill Fort, Thursday Islalld was constructed between 1891-1893 to defend the Australian colonies against a feared Russian invasion. It retained an operational role until the 1920.'1 and played a minor role in World /t'ar 2. From 1954 to 1993 the site, but not the facilities, was used as a weather station. More recently it has been home ofthe Ton-es Strait Historical Society and Museum Association museum. It is a major attraction during the tourist season and an important local icon. For archaeologists it has sign~ficance as a relatively intact nineteenth-century military installation. Two 'Centenary of Federation' grants have proVided the impetus to undertake conservation and presentation works involving various task -spec~fic, archaeological activities. At the management level archaeologists play the lead role in the project. The project has demonstrated the value oJarchaeology and tourism joining forces. The danger ofa 'theme park 'presentation has been avoided. Technical accuracy and careful site planning has ensured a high degree ofaccuracy is retained. Provided these qualities can be assured then, it is argued, there is an opportunity for archaeology to be a majOl; long-term beneficiary. But to achieve that, the discipline must move from being entrenched in its academic mould and become Jar more receptive to the broader needs ofthe twentyfirst century.

Physical activity and sedentary behavior: A population-based study of barriers, enjoyment, and preference

The associations of physical activity and sedentary behavior with barriers, enjoyment, and preferences were examined in a population-based mail survey of 1,332 adults. Respondents reporting high enjoyment and preference for physical activity were more likely to report high levels of activity. Those reporting cost, the weather, and personal barriers to physical activity were less likely to be physically active. Preference for sedentary behavior was associated with the decreased likelihood of being physically active, and the weather as a barrier to physical activity was associated with the increased likelihood of sedentary behavior. These constructs can be used to examine individual and environmental influences on physical activity and sedentary behavior in specific populations and could inform the development of targeted interventions.

Overweight and obesity in Australia: The 1999-2000 Australian Diabetes, Obesity and Lifestyle Study (AusDiab)

Objective: To measure the prevalence of obesity in Australian adults and to examine the associations of obesity with socioeconomic and lifestyle factors. Design: AusDiab, a cross-sectional study conducted between May 1999 and December 2000, involved participants from 42 randomly selected districts throughout Australia. Participants: Of 20 347 eligible people aged greater than or equal to 25 years who completed a household interview, 11247 attended the physical examination at local survey sites (response rate, 55%). Main outcome measures: Overweight and obesity defined by body mass index (BMI; kg/m(2)) and waist circumference (cm); sociodemographic factors (including smoking, physical activity and television viewing time). Results: The prevalence of overweight and obesity (BMI greater than or equal to 25.0 kg/m(2); waist circumference greater than or equal to 80.0 cm [women] or greater than or equal to 94.0 cm [men]) in both sexes was almost 60%, defined by either BMI or waist circumference. The prevalence of obesity was 2.5 times higher than in 1980. Using waist circumference, the prevalence of obesity was higher in women than men (34.1% v 26.8%; P < 0.01). Lower educational status, higher television viewing time and lower physical activity time were each strongly associated with obesity, with television viewing time showing a stronger relationship than physical activity time. Conclusions: The prevalence of obesity in Australia has more than doubled in the past 20 years. Strong positive associations between obesity and each of television viewing time and lower physical activity time confirm the influence of sedentary lifestyles on obesity, and underline the potential benefits of reducing sedentary behaviour, as well as increasing physical activity, to curb the obesity epidemic.

Trends in physical activity participation and the impact of integrated campaigns among Australian adults, 1997-99

Objectives: To determine whether awareness of the moderate physical activity message and prevalence of participation changed among Australian adults between 1997 and 1999, and if changes differed across Australia. Methods: Data were compared on awareness of the moderate physical activity message and on physical activity participation from identical national physical activity surveys in 1997 and 1999. Results: In 1999, following integrated public health efforts, recognition of the Active Australia campaign was substantially higher in NSW/ACT (61.7%) than elsewhere (29.3%). Knowledge about benefits of moderate activity increased between 1997 and 1999, more so in States with public health campaigns. National participation in 'sufficient physical activity' declined between 1997 and 1999, from 63% to 57%, but the decline was smaller in NSW/ACT (4.4%) than in the other States (6.0%). Conclusions and implications: Declining trends in physical activity in Australia require increased public health investments, including strategic planning and public education, such as occurred in NSW (1997/98).

Structural refinement of systems specified in object-z and CSP

This paper is concerned with methods for refinement of specifications written using a combination of Object-Z and CSP. Such a combination has proved to be a suitable vehicle for specifying complex systems which involve state and behaviour, and several proposals exist for integrating these two languages. The basis of the integration in this paper is a semantics of Object-Z classes identical to CSP processes. This allows classes specified in Object-Z to be combined using CSP operators. It has been shown that this semantic model allows state-based refinement relations to be used on the Object-Z components in an integrated Object-Z/CSP specification. However, the current refinement methodology does not allow the structure of a specification to be changed in a refinement, whereas a full methodology would, for example, allow concurrency to be introduced during the development life-cycle. In this paper, we tackle these concerns and discuss refinements of specifications written using Object-Z and CSP where we change the structure of the specification when performing the refinement. In particular, we develop a set of structural simulation rules which allow single components to be refined to more complex specifications involving CSP operators. The soundness of these rules is verified against the common semantic model and they are illustrated via a number of examples.