940 resultados para 1042
Resumo:
Cucumis anguria present dark germinating seeds at 25 degrees C. Seeds without the tegument are photosensitive germinating better in darkness than under continuous white light. However, pre-incubation at 40 degrees C for 48 hours allows the seeds to germinate under continuous white light and the incubation of naked seeds at -0.6MPa restored the light inhibition of seed germination. Our results suggest that the tegument interact with the phytochrome in the control of seed germination in part of the population of seed of C. anguria.
Resumo:
1. The effect of endotoxin, interleukin-1 beta and prostaglandin on fever response was studied in 80 broilers (Hubbard strain). Endotoxin (E. coli, LPS) was injected iv (1.5 mu g/kg) and icv (1.5 mu g/bird); interleukin-1 (human recombinant IL-1 beta, 80 pg/bird) and prostaglandin E(2) (5 mu g/bird) were injected icv. Indomethacin (10 mg/kg, iv) pretreatment was also used before iv endotoxin injection. 2. The results showed that indomethacin was able to block the fever response induced by iv endotoxin injection, and IL-1 beta and PGE(2) were both effective in producing fever when injected icv. These data suggest a prostaglandin-mediated fever response by broilers, and also a strong evidence of the involvement of endogenous pyrogen (interleukin-1) in fever response in birds.
Resumo:
The thermal properties of plums (Prunus domestica) and prunes were investigated in the moisture content of 14.2-80.4% (wet basis) near room temperature (approximately 28 degrees C). The apparent density of the fruits increased from 1042.9 to 1460.0 kg/m(3), and the bulk density increased from 706.6 to 897.5 kg/m(3) as the plums were dried, following classical empirical models as a function of moisture content. It was found that specific heat, effective thermal diffusivity, and effective thermal conductivity of the prunes increased with the moisture content of the samples, which can be represented by using different empirical models.
Resumo:
Background and objectives: To assess the microhardness of dentin subsurface after Er:yttrium-aluminum-garnet (YAG) and Nd:YAG laser irradiation. Study design/materials and methods: Twenty-four bovine incisors, without pulp, were used. The vestibular surface was worn out until the dentin was reached and divided in mesial and distal regions. The samples were divided into two groups: GI-distal, irradiated by Er: YAG laser, and GII-distal, irradiated by Nd: YAG laser. The mesial area was protected so as to not receive the laser irradiation. The measurements were made on Vickers digital microhardmeter. Results: For GI-there was no significant statistical difference, Cl(-4.59 to 0.78), between the values of irradiated (55.61 +/- 4.38) and unirradiated (57.51 +/- 4.00) areas. For GII-the values were higher for the irradiated (62.21 +/- 6.48) compared to the unirradiated (57.82 +/- 5.42) area, CI(1.65 +/- to 7.13). Conclusions: There was an increase of dentin microhardness when the Nd: YAG was used, but the Er: YAG did not cause significant alterations in dentin microhardness. (c) 2007 Laser Institute of America.
Resumo:
To further understand the function of morphogenetic hormones in honeybee eye differentiation, the alterations in ommatidial patterning induced by pyriproxyfen, a juvenile hormone (JH) analogue, were studied by scanning and transmission electron microscopy. Prepupae of prospective honeybee workers were treated with pyriproxyfen and the effects on ommatidial differentiation were described at the end of the pupal development. The results show that the entire ommatidia, i.e., the dioptric as well as the receptor systems, were affected by the JH analogue. The wave of ommatidial differentiation, which progresses from the posterior to the anterior region of the pupal eyes, was arrested. In treated pupae, the rhabdomeres only differentiated at the apical axis of the retinula, the secondary and tertiary pigment cells did not develop their cytoplasm protrusions, and the cone cell quartet did not pattern correctly. Simultaneously, an intense vacuolization was observed in cells forming ommatidia. In a previous study we showed that pyriproxyfen exerts an inhibition on pupal ecdysteroid secretion. In this sense, the arrested ommatidial differentiation in pyriproxyfen-treated pupae could be due to a secondary effect resulting from an alteration in pupal ecdysteroid titers. J. Morphol. 249:89-99, 2001. (C) 2001 Wiley-Liss, Inc.
Resumo:
This work reports basic hematologic values of a sample of a population of free-living marsh deer (Blastocerus dichotomus) living by the Parana River in Southeast Brazil. Hematologic values are presented separately for male, female, and young animals as well as for anesthetized and nonanesthetized cervids. Nonanesthetized deer restrained by physical means had significantly higher erythrocyte indices and total leukocyte counts. Comparisons of blood parameters of anesthetized animals of different ages and gender differed slightly, with only two significant differences observed: young animals had significantly higher red blood cell counts than adult males and a lower blood total protein content when compared to adult females. Results indicate that two main reference ranges for blood values should be considered for marsh deer, for blood obtained from anesthetized or physically restrained individuals.
Resumo:
The prevalence of Chlamydophila psittaci (formerly Chlamydia psittaci) infection was assessed in 95 apparently healthy, captive Amazon parrots from three breeder collections in southeastern and west-central Brazil. Cloacal swabs from 95 birds were tested for chlamydial antigen, which was detected by direct immunofluorescence (DIF), and serum samples from 44 of these birds were tested for antibodies to C. psittaci using an enzyme-linked immunosorbent assay. The prevalences of active infection as detected by DIF were 16.7%, 22.2%, and 56.1%, and seroprevalences were 100%, 87.5%, and 60% in flocks A, B, and C, respectively. We can therefore infer that C. psittaci may be widespread in captive parrot populations in Brazil.
Resumo:
Zirconia-ceria powders with 12 mol % of CeO2 doped with 0.3 mol% of iron, copper, manganese and nickel oxides were synthesized by the conventional mixed oxide method. These systems were investigated with regard to the sinterability and electrical properties. Sintering was studied considering the shrinkage rate, densification, grain size, and phase evolution. Small amount of dopant such as iron reduces sintering temperature by over 150degreesC and more than 98% of tetragonal phase was retained at room temperature in samples sintered at 1450degreesC against 1600degreesC to stabilize the tetragonal phase on pure ZrO2-CeO2 system. The electrical conductivity was measured using impedance spectroscopy and the results were reported. The activation energy values calculated from the Arrhenius's plots in the temperature range of 350-700degreesC for intragrain conductivities are 1.04 eV.
Resumo:
In this work we study how the infrared sector of the interaction Hamiltonian can affect the construction of the S-matrix operator of QED in (2+1) dimensions.
Resumo:
We present evidence for Plasmodium vivax infection among Duffy blood group-negative inhabitants of Brazil. The P. vivax identification was determined by both genotypic and non-genotypic screening tests. The Duffy blood group was genotyped by PCR/RFLP and phenotyped using a microtyping kit. We detected two homozygous FY*B-33 carriers infected by P vivax, whose circumsporozoite protein genotypes were VK210 and/or P. vivax-like. Additional efforts are necessary in order to clarify the evidence that P. vivax is being transmitted among Duffy blood group-negative patients from the Brazilian Amazon region. (C) 2007 Published by Elsevier Ltd on behalf of Royal Society of Tropical Medicine and Hygiene.
Resumo:
In this study we analyzed possible damages that vaporization from laser radiation could cause to implant material. Fifteen standard titanium implants, measuring 3.75 mm in diameter by 7 mm in length, were placed into the upper and lower jaws of three dogs according to Branemark's system. After osseointegration, all implants were exposed. In group I (control) conventional exposure with a punch was used; in group II, a CO2 laser with 2 W (power density: 256 W/cm(2); fluency: 0.077 J/cm(2), and a pulse mode of 0.30 ms) was used, and in group III 4 W (power density: 512 W/cm(2), fluency: 0.154 J/cm(2), and a pulse mode of 0.30 ms) was used. After vaporization, the cover screws were removed and sent for metallographic examination. The results showed that cover screws irradiated with 2 and 4 W power caused no superficial or microstructural alteration. The results also showed that the prescribed power densities, fluencies, and the use of the pulse mode were suitable for exposing implants without damage to tissue or implant material. (C) 2002 Laser Institute of America.
Resumo:
A histological study on the healing of extraction wounds following laser irradiation using a He-Ne laser, was carried out in rats. The results suggest that this mode of treatment has a beneficial effect on initial bony wound healing. Proliferation of fibroblasts and formation of trabecular osteoid tissue were found to be more prominent within the irradiated group. The deposition of led in the newly formed bone suggests swifter ossification within the irradiated group.
Resumo:
Lithium tantalate (LiTaO3) thin films with (50:50) stoichiometry were prepared using polymeric organic solution. The 5-layered films were deposited on silicon (100) substrates by spin coating method. The coated substrates were thermally treated at 500degreesC for 3 h under several oxygen atmospheres in order to study the influence of oxygen flow on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction results showed that an oxygen flow of 100 cm(3)/min leads to LiTaO3 thin films with higher crystallinity, without preferential orientation. It was observed by scanning electron microscopy (SEM) that the thickness of thin films decreases when the oxygen flow increases. The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by oxygen flow.