Return migration and entrepreneurship: An IV approach

Double Degree. A Work Project, presented as part of the requirements for the Award of a Master’s Degree in Management from NOVA – School of Business and Economics and a Masters Degree in Economics from Louvain School of Management

Community-acquired methicillin-resistant Staphylococcus aureus carrying SCCmec type IV in southern Brazil

INTRODUCTION: Methicillin-resistant Staphylococcus aureus (MRSA) is an important pathogen commonly associated with nosocomial infections. However, it has also been associated with community-acquired skin and soft tissue infections (CA-MRSA). There are few data on the identification and prevalence of CA-MRSA infections in Brazil. METHODS: This is a cross-sectional study of 104 patients with community-acquired skin infections attending two health care centers in Porto Alegre, southern Brazil. MRSA isolates were characterized by molecular methods, including detection of the mecA gene by PCR, gene SCCmec typing, Panton-Valentine leukocidin (PVL) detection, pulsed-field gel electrophoresis (PFGE), and multilocus sequence typing (MLST). RESULTS: From the 104 samples, 58 Staphylococcus aureus isolates were obtained, of which five (8.6%) had a CA-MRSA-resistant profile. All five isolates had the mecA gene and amplified to SCCmec type IV. Analysis of chromosomal DNA by PFGE revealed the presence of two clusters related to international clones (OSPC and USA 300), with a Dice similarity coefficient >80%. The study was complemented by MLST, which detected three different strains: ST30, ST8, and ST45, the latter not presenting any relation with the clones compared in PFGE. CONCLUSIONS: The presence of CA-MRSA reveals an important change in the epidemiology of this pathogen and adds new elements to the knowledge of the molecular biology of infections by MRSA with SCCmec type IV in southern Brazil.

Engineering of metal oxide nanoparticles for application in electrochemical devices

The growing demand for materials and devices with new functionalities led to the increased inter-est in the field of nanomaterials and nanotechnologies. Nanoparticles, not only present a reduced size as well as high reactivity, which allows the development of electronic and electrochemical devices with exclusive properties, when compared with thin films. This dissertation aims to explore the development of several nanostructured metal oxides by sol-vothermal synthesis and its application in different electrochemical devices. Within this broad theme, this study has a specific number of objectives: a) research of the influence of the synthesis parameters to the structure and morphology of the nanoparticles; b) improvement of the perfor-mance of the electrochromic devices with the application of the nanoparticles as electrode; c) application of the nanoparticles as probes to sensing devices; and d) production of solution-pro-cessed transistors with a nanostructured metal oxide semiconductor. Regarding the results, several conclusions can be exposed. Solvothermal synthesis shows to be a very versatile method to control the growth and morphology of the nanoparticles. The electrochromic device performance is influenced by the different structures and morphologies of WO3 nanoparticles, mainly due to the surface area and conductivity of the materials. The dep-osition of the electrochromic layer by inkjet printing allows the patterning of the electrodes without wasting material and without any additional steps. Nanostructured WO3 probes were produced by electrodeposition and drop casting and applied as pH sensor and biosensor, respectively. The good performance and sensitivity of the devices is explained by the high number of electrochemical reactions occurring at the surface of the na-noparticles. GIZO nanoparticles were deposited by spin coating and used in electrolyte-gated transistors, which promotes a good interface between the semiconductor and the dielectric. The produced transistors work at low potential and with improved ON-OFF current ratio, up to 6 orders of mag-nitude. To summarize, the low temperatures used in the production of the devices are compatible with flexible substrates and additionally, the low cost of the techniques involved can be adapted for disposable devices.

Antioxidant factors, nitric oxide levels, and cellular damage in leprosy patients

Introduction The immune response caused by Mycobacterium leprae is a risk factor for the development of oxidative stress (OS) in leprosy patients. This study aimed to assess OS in leprosy patients before the use of a multidrug therapy. Methods We evaluated the nitric oxide (NO) concentration; antioxidant capacity; levels of malondialdehyde, methemoglobin and reduced glutathione; and the activity of catalase and superoxide dismutase (SOD) in leprosy patients. Results We observed lower SOD activity in these leprosy patients; however, the NO levels and antioxidant capacity were increased. Conclusions The infectious process in response to M. leprae could primarily be responsible for the OS observed in these patients.

A construção da figura da INANNA/IŠTAR na Mesopotâmia: IV-II milénios a.C.

A divindade sumero-acádica Inanna/Ištar afirma-se como uma das mais importantes figuras divinas do universo religioso mesopotâmico, tendo sido alvo de um trabalho constante por parte da historiografia moderna. O seu lugar de destaque é confirmado pela sua constante presença como protagonista nas composições mitopoéticas, assim como pela transversalidade do seu culto, atestado desde a segunda metade do IV milénio a.C. O seu carácter sincrético conheceu um primeiro e vinculativo momento, quando a deusa suméria Inanna se fundiu com a deusa semita Ištar. A partilha da mesma identidade astral, Vénus, permitiu que as características das duas divindades se misturassem, definindo o quadro comportamental arquetípico que encontramos na literatura, nos cultos e na iconografia, tanto em termos diacrónicos como sincrónicos. O presente trabalho tem como grande objectivo reavaliar o processo construtivo desta divindade, tentando descortinar os contributos de uma e outra matriz, cujo encontro se deu ainda durante o IV milénio a.C. Produto divino de uma civilização híbrida, Inanna/Ištar desenvolveu a sua múltipla personalidade, ao mesmo tempo que a Mesopotâmia procurava acomodar as tradições sumérias e semitas, numa articulação do binómio múltiplo/uno ímpar. O exame cruzado dos dados onde a deusa figura, desde os primórdios do seu culto, até aos primeiros séculos do II milénio a.C., época em que a literatura mesopotâmica conheceu a sua fase de ouro, permite-nos evidenciar a sua esfera de acção globalizante, que encontra o seu fio condutor nas relações de poder. Por outro lado, torna-se possível descortinar as suas origens, assim como sincretismos e dissociações divinas, prévias ao advento político de Sargão, que cristalizou a simbiose civilizacional e, como tal, religiosa, da Mesopotâmia, ao efectivar a primeira unificação do território compreendido entre os rios Tigre e Eufrates. Com esta tese pretendemos ainda conciliar expressões religiosas de tempos diferentes, centradas na figura de Inanna/Ištar, contrariando a tendência tradicional de confinar o comportamento e pensamento religiosos do homem mesopotâmico, numa moldura cronológica, definida por balizas políticas. A nossa intenção prende-se, sobretudo, com a identificação do grau de transformações que a identidade da deusa terá sofrido, a partir do entendimento que a mesma encontra a sua origem e, simultaneamente, reflecte-se na mentalidade dos mesopotâmios, cujo norte se encontra numa lógica de mudança em continuidade. Seguindo linhas historiográficas recentes, a nossa proposta afigura-se como um novo olhar sobre o desenvolvimento de uma das divindades mesopotâmicas mais marcante, cujos ecos ressoaram pelos quatro quadrantes da Antiguidade do Médio Oriente.

Fabrication and characterization of transparent conductive oxide surface sensors for electrocorticography – TrECoG

Understanding how the brain works has been one of the greatest goals of mankind. This desire fuels the scientific community to pursue novel techniques able to acquire the complex information produced by the brain at any given moment. The Electrocorticography (ECoG) is one of those techniques. By placing conductive electrodes over the dura, or directly over the cortex, and measuring the electric potential variation, one can acquire information regarding the activation of those areas. In this work, transparent ECoGs, (TrECoGs) are fabricated through thin film deposition of the Transparent Conductive Oxides (TCOs) Indium-Zinc-Oxide (IZO) and Gallium-Zinc-Oxide (GZO). Five distinct devices have been fabricated via shadow masking and photolithography. The data acquired and presented in this work validates the TrECoGs fabricated as efficient devices for recording brain activity. The best results were obtained for the GZO- based TrECoG, which presented an average impedance of 36 kΩ at 1 kHz for 500 μm diameter electrodes, a transmittance close to 90% for the visible spectrum and a clear capability to detect brain signal variations. The IZO based devices also presented high transmittance levels (90%), but with higher impedances, which ranged from 40 kΩ to 100 kΩ.

Engineered MRI nanoprobes based on superparamagnetic iron oxide nanoparticles

This project aimed to engineer new T2 MRI contrast agents for cell labeling based on formulations containing monodisperse iron oxide magnetic nanoparticles (MNP) coated with natural and synthetic polymers. Monodisperse MNP capped with hydrophobic ligands were synthesized by a thermal decomposition method, and further stabilized in aqueous media with citric acid or meso-2,3-dimercaptosuccinic acid (DMSA) through a ligand exchange reaction. Hydrophilic MNP-DMSA, with optimal hydrodynamic size distribution, colloidal stability and magnetic properties, were used for further functionalization with different coating materials. A covalent coupling strategy was devised to bind the biopolymer gum Arabic (GA) onto MNPDMSA and produce an efficient contrast agent, which enhanced cellular uptake in human colorectal carcinoma cells (HCT116 cell line) compared to uncoated MNP-DMSA. A similar protocol was employed to coat MNP-DMSA with a novel biopolymer produced by a biotechnological process, the exopolysaccharide (EPS) Fucopol. Similar to MNP-DMSA-GA, MNP-DMSA-EPS improved cellular uptake in HCT116 cells compared to MNP-DMSA. However, MNP-DMSA-EPS were particularly efficient towards the neural stem/progenitor cell line ReNcell VM, for which a better iron dose-dependent MRI contrast enhancement was obtained at low iron concentrations and short incubation times. A combination of synthetic and biological coating materials was also explored in this project, to design a dynamic tumortargeting nanoprobe activated by the acidic pH of tumors. The pH-dependent affinity pair neutravidin/iminobiotin, was combined in a multilayer architecture with the synthetic polymers poy-L-lysine and poly(ethylene glycol) and yielded an efficient MRI nanoprobe with ability to distinguish cells cultured in acidic pH conditions form cells cultured in physiological pH conditions.

Spray coating of oxide and chalcogenide semiconductor layers for TFT application

This work documents the deposition and optimization of semiconductor thin films using chemical spray coating technique (CSC) for application on thin-film transistors (TFTs), with a low-cost, simple method. CSC setup was implemented and explored for industrial application, within Holst Centre, an R&D center in the Netherlands. As zinc oxide had already been studied within the organization, it was used as a standard material in the initial experiments, obtaining typical mobility values of 0.14 cm2/(V.s) for unpatterned TFTs. Then, oxide X layer characteristics were compared for films deposited with CSC at 40°C and spin-coating. The mobility of the spin-coated TFTs was 103 cm2/(V.s) higher, presumably due to the lack of uniformity of spray-coated film at such low temperatures. Lastly, tin sulfide, a relatively unexplored material, was deposited by CSC in order to obtain functional TFTs and explore the device’s potential for working as a phototransistor. Despite the low mobilities of the devices, a sensitive photodetector was made, showing drain current variation of nearly one order of magnitude under yellow light. CSC technique’s simplicity and versatility was confirmed, as three different semiconductors were successfully implemented into functional devices.

Field-effect transistors based on Zinc oxide nanoparticles

This work reports the development of field-effect transistors (FETs), whose channel is based on zinc oxide (ZnO) nanoparticles (NPs). Using screen-printing as the primary deposition technique, different inks were developed, where the semiconducting ink is based on a ZnO NPs dispersion in ethyl cellulose (EC). These inks were used to print electrolyte-gated transistors (EGTs) in a staggered-top gate structure on glass substrates, using a lithium-based polymeric electrolyte. In another approach, FETs with a staggered-bottom gate structure on paper were developed using a sol-gel method to functionalize the paper’s surface with ZnO NPs, using zinc acetate dihydrate (ZnC4H6O4·2H2O) and sodium hydroxide (NaOH) as precursors. In this case, the paper itself was used as dielectric. The various layers of the two devices were characterized using X-ray diffraction (XRD), scanning electron microscopy (SEM), Fourier Transform Infrared spectroscopy (FTIR), thermogravimetric and differential scanning calorimetric analyses (TG-DSC). Electrochemical impedance spectroscopy (EIS) was used in order to evaluate the electric double-layer (EDL) formation, in the case of the EGTs. The ZnO NPs EGTs present electrical modulation for annealing temperatures equal or superior to 300 ºC and in terms of electrical properties they showed On/Off ratios in the order of 103, saturation mobilities (μSat) of 1.49x10-1 cm2(Vs)-1 and transconductance (gm) of 10-5 S. On the other hand, the ZnO NPs FETs on paper exhibited On/Off ratios in the order of 102, μSat of 4.83x10- 3 cm2(Vs)-1and gm around 10-8 S.

Inhaled nitric oxide in the management of persistent pulmonary hypertension of the newborn: a meta-analysis

OBJECTIVES: To evaluate the use of inhaled nitric oxide (NO) in the management of persistent pulmonary hypertension of the newborn. METHODS: Computerized bibliographic search on MEDLINE, CURRENT CONTENTS and LILACS covering the period from January 1990 to March 1998; review of references of all papers found on the subject. Only randomized clinical trials evaluating nitric oxide and conventional treatment were included. OUTCOMES STUDIED: death, requirement for extracorporeal membrane oxygenation (ECMO), systemic oxygenation, complications at the central nervous system and development of chronic pulmonary disease. The methodologic quality of the studies was evaluated by a quality score system, on a scale of 13 points. RESULTS: For infants without congenital diaphragmatic hernia, inhaled NO did not change mortality (typical odds ratio: 1.04; 95% CI: 0.6 to 1.8); the need for ECMO was reduced (relative risk: 0.73; 95% CI: 0.60 to 0.90), and the oxygenation was improved (PaO2 by a mean of 53.3 mm Hg; 95% CI: 44.8 to 61.4; oxygenation index by a mean of -12.2; 95% CI: -14.1 to -9.9). For infants with congenital diaphragmatic hernia, mortality, requirement for ECMO, and oxygenation were not changed. For all infants, central nervous system complications and incidence of chronic pulmonary disease did not change. CONCLUSIONS: Inhaled NO improves oxygenation and reduces requirement for ECMO only in newborns with persistent pulmonary hypertension who do not have diaphragmatic hernia. The risk of complications of the central nervous system and chronic pulmonary disease were not affected by inhaled NO.

Electrical characterization and modification of low dimensional oxide semiconductors for sensor applications

This work reviews the recent research on ion and UV irradiation of β-

Chemotherapy versus best supportive care in stage IV non-small cell lung cancer, non metastatic to the brain

Stage IV non-small cell lung cancer is a fatal disease, with a median survival of 14 months. Systemic chemotherapy is the most common approach. However the impact in overall survival and quality of life still a controversy. OBJECTIVES: To determine differences in overall survival and quality of life among patients with stage IV non-small cell lung cancer non-metastatic to the brain treated with best supportive care versus systemic chemotherapy. PATIENTS: From February 1990 through December 1995, 78 eligible patients were admitted with the diagnosis of stage IV non-small cell lung cancer . Patients were divided in 2 groups: Group A (n=31 -- treated with best supportive care ), and Group B (n=47 -- treated with systemic chemotherapy). RESULTS: The median survival time was 23 weeks (range 5 -- 153 weeks) in Group A and 55 weeks (range 7.4 -- 213 weeks) in Group B (p=0.0018). In both groups, the incidence of admission for IV antibiotics and need of blood transfusions were similar. Patients receiving systemic chemotherapy were also stratified into those receiving mytomycin, vinblastin, and cisplatinum, n=25 and those receiving other combination regimens (platinum derivatives associated with other drugs, n=22). Patients receiving mytomycin, vinblastin, and cisplatinum, n=25 had a higher incidence of febrile neutropenia and had their cycles delayed for longer periods of time than the other group. These patients also had a shorter median survival time (51 versus 66 weeks, p=0.005). CONCLUSION: In patients with stage IV non-small cell lung cancer, non-metastatic to the brain, chemotherapy significantly increases survival compared with best supportive care.

Al-doped ZnO ceramic sputtering targets based on nanocrystalline powders produced by emulsion detonation synthesis – deposition and application as a transparent conductive oxide material

Transparent conducting oxides (TCOs) have been largely used in the optoelectronic industry due to their singular combination of low electrical resistivity and high optical transmittance. They are usually deposited by magnetron sputtering systems being applied in several devices, specifically thin film solar cells (TFSCs). Sputtering targets are crucial components of the sputtering process, with many of the sputtered films properties dependent on the targets characteristics. The present thesis focuses on the development of high quality conductive Al-doped ZnO (AZO) ceramic sputtering targets based on nanostructured powders produced by emulsion detonation synthesis method (EDSM), and their application as a TCO. In this sense, the influence of several processing parameters was investigated from the targets raw-materials synthesis to the application of sputtered films in optoelectronic devices. The optimized manufactured AZO targets present a final density above 99 % with controlled grain size, an homogeneous microstructure with a well dispersed ZnAl2O4 spinel phase, and electrical resistivities of ~4 × 10-4 Ωcm independently on the Al-doping level among 0.5 and 2.0 wt. % Al2O3. Sintering conditions proved to have a great influence on the properties of the targets and their performance as a sputtering target. It was demonstrated that both deposition process and final properties of the films are related with the targets characteristics, which in turn depends on the initial powder properties. In parallel, the influence of several deposition parameters in the film´s properties sputtered from these targets was investigated. The sputtered AZO TCOs showed electrical properties at room temperature that are superior to simple oxides and comparable to a reference TCO – indium tin oxide (ITO), namely low electrical resistivity of 5.45 × 10-4 Ωcm, high carrier mobility (29.4 cm2V-1s-1), and high charge carrier concentration (3.97 × 1020 cm-3), and also average transmittance in the visible region > 80 %. These superior properties allowed their successful application in different optoelectronic devices.

Aspectos biológicos de peixes amazônicos. IV. Padrões eletroforéticos de hemoglobinas de 22 espécies coletadas na ilha da Marchantaria (Manaus - AM).

Foram estudados hemolisados de 22 espécies de peixes coletados na Ilha da Marchantaria (rio Solimões, Manaus - AM), através de eletroforeses em gel de amido e gel de ágar-amido. Uma grande heterogeneidade hemoglobínica interespecífica foi detectada, a exemplo do observado para espécies de zona subtropical e temperada. A capacidade de resolução de dois suportes eletroforéticos é discutida. Os resultados são discutidos em função da possível adaptabilidade conferida pelos sistemas de múltiplas hemoglobinas.

Estudos silviculturais de uma população natural de Copaifera multijuga Hayne - Leguminosae, na Amazônia Central. IV. Interpretação de dados fenológicos em relação a elementos climáticos

O autor apresenta informações fenológicas mensais de 82 matrizes de Copaiba (Copaifera multljuga Hayne), obtidas na Reserva Florestal Adolfo Ducke no período de fevereiro de 1979 a dezembro de 1985. São mostradas as percentagens de ocorrência das fases de floração, frutificação e mudança foliar e uma análise de regressão múltipla das fenofases com sete variáveis do clima (temperatura máxima, temperatura minima e temperatura média, em C°; umidade relativa em %; precipitação total em milímetros; insolação total em horas e evaporação líquida total em milímetros. A plena floração ocorreu na estação de chuvas e a frutificação (frutos maduros) apresentou picos máximos no fim da estação chuvosa e inicio da estação seca, comportamento que. difere da maioria das espécies arbóreas tropicais. A espécie portou-se como perenifólia e a fase de folhas novas antecedeu a da floração.