Autonomic dysfunction and systemic oxidative stress associated with glaucomatous optic neuropathy

There were four principal sections to the work: 1. Investigation of ocular and systemic vascular risk factors in POAG. The principal findings of this work were: a). Glaucoma patients exhibit an anticipatory reaction to the physical stress, similar to subjects at risk for cardiovascular diseases; a blunted BP response and a reduction in ONH blood flow in response to cold provocation was also recorded. b). Silent myocardial ischaemic episodes occurred during peaks in systemic BP and HR. c). Independent of a positive history for cardiovascular diseases, patients suffering from POAG demonstrate a blunt circadian rhythm of the ANS. 2. Assessment of the relationship between vascular and systemic vascular risk factors in GON. The principal findings of this work were: a). POAG patients demonstrate a high sympathetic tonus over a 24-h period. b). POAG patients with lower OBF demonstrate both 24-h systemic BP and HRV abnormalities. c). OBF alterations observed in some glaucoma patients could be either primary or secondary to systemic haemodynamic disturbances and not a consequence of ONH damage. 3. Assessment of the level of systemic anti-oxidant defence in POAG patients. The principal finding of this work was: Patients suffering from POAG demonstrated significantly lower GSH and t-GSH levels than normal controls. 4. Investigation of the effect of treatment with latanoprost 0.005% on visual function and OBF. The findings of this work were: a). Treatment with latanoprost 0.005% resulted in a significant decrease in IOP and increase in OPP. VF damage progression has also been stopped. b). Treatment with latanoprost 0.005% resulted in a significant increase in the OBF parameters measured at the ONH and peripapillary retina levels. Finally, the importance of a clear protocol for managing new POAG cases is highlighted and a clinical conduit is proposed.

Attributions, cognitions, and coping styles:teleworkers' reactions to work-related problems

Based on the attributional reformulation of learned helplessness theory (Abramson, Seligman, & Teasdale, 1978) and Lazarus and Launier's (1978) primary-secondary appraisal theory of stress, the present study sought to examine teleworkers' reactions to their work-related problems. The role of attributions about the sources, and cognitions about the consesquences, of these problems in promoting positive adaptation was addressed. In particular, it was predicted that teleworkers who made optimistic attributions and cognitions would be more likely to employ problem-focused coping strategies and, as a result, report more positive psychological and job-related outcomes. Based on a survey sample of 192 teleworkers, the results indicated that a tendency to engage in self-blame was related to the use of emotion-focused coping strategies. In turn, there was evidence linking emotion-focused coping strategies to negative outcomes and problem-focused coping strategies to positive outcomes. The results are discussed in relation to attributional approaches to stress which highlight the importance of cognitions about the consequences of negative events. Finally, implications for the training of teleworkers are presented.

Controlling system uncertainty in sport and work

An applied psychological framework for coping with performance uncertainty in sport and work systems is presented. The theme of personal control serves to integrate ideas prevalent in industrial and organisational psychology, the stress literature and labour process theory. These commonly focus on the promotion of tacit knowledge and learned resourcefulness in individual performers. Finally, data from an empirical evaluation of a development training programme to facilitate self-regulation skills in professional athletes are briefly highlighted.

Advanced manufacturing technology and work design:towards a theoretical framework

This paper introduces a theoretical framework to guide research into the psychological effects of advanced manufacturing technology (AMT) on shopfloor operators. The framework has two main aspects. First, based on the emerging literature on the job content implications of AMT, it identifies four key constructs, namely: control, cognitive demand, production responsibility and social interaction. Second, by drawing on the more established job design, stress and related literatures, it predicts how these independent variables differentially affect system performance, job-related strain and job satisfaction. The wider implications and limitations of the theoretical framework are discussed.

Cross-cultural variations in climate for autonomy, stress and organizational productivity relationships:A comparison of Chinese and UK manufacturing organizations

Cross-cultural researchers have questioned the extent to which European–American management practices can be transported to major markets in Asia, such as the People's Republic of China. Applying employee involvement theory, we examined the relationships between climate for autonomy, work demands climate, employee stress and organizational productivity in a cross-national study of 51 UK and 104 Chinese manufacturing organizations. We predicted and found that climate for autonomy was positively and negatively related to stress in the Chinese and UK contexts, respectively. The interaction of climate for autonomy and work demands climate was significant: climate for autonomy was positively related to organizational productivity only when work demands climate was low.

Gene network and proteomic analyses of cardiac responses to pathological and physiological stress

Background—The molecular mechanisms underlying similarities and differences between physiological and pathological left ventricular hypertrophy (LVH) are of intense interest. Most previous work involved targeted analysis of individual signaling pathways or screening of transcriptomic profiles. We developed a network biology approach using genomic and proteomic data to study the molecular patterns that distinguish pathological and physiological LVH. Methods and Results—A network-based analysis using graph theory methods was undertaken on 127 genome-wide expression arrays of in vivo murine LVH. This revealed phenotype-specific pathological and physiological gene coexpression networks. Despite >1650 common genes in the 2 networks, network structure is significantly different. This is largely because of rewiring of genes that are differentially coexpressed in the 2 networks; this novel concept of differential wiring was further validated experimentally. Functional analysis of the rewired network revealed several distinct cellular pathways and gene sets. Deeper exploration was undertaken by targeted proteomic analysis of mitochondrial, myofilament, and extracellular subproteomes in pathological LVH. A notable finding was that mRNA–protein correlation was greater at the cellular pathway level than for individual loci. Conclusions—This first combined gene network and proteomic analysis of LVH reveals novel insights into the integrated pathomechanisms that distinguish pathological versus physiological phenotypes. In particular, we identify differential gene wiring as a major distinguishing feature of these phenotypes. This approach provides a platform for the investigation of potentially novel pathways in LVH and offers a freely accessible protocol (http://sites.google.com/site/cardionetworks) for similar analyses in other cardiovascular diseases.

Fatigue cracking from stress concentration in mild steel

Pulsating; tension fatigue tests have been carried out on edge notched specimens of a mild steel. An electrical potential drop technique was used to determine the number of cycles taken to initiate cracks and the rate at which the cracks grew across the specimen. The results could be described by the range of stress intensity factor, which for crack initiation was modified to take account of the notch root radius. Analysis of elastic stress distributions at cracks and notches and models of plasticity at crack tips are used to discuss the results. Limited evidence in the literature indicates that the fracture mechanics approach may provide a general description of crack initiation and growth in notched specimens, and a simple graphical method of calculating fatigue lives is described. The results are used to illustrate the effects of specimen size and geometry on the fatigue life of notched specimens. The relevance of the work to the assessment of the significance of defects in welds is discussed.

Weight loss strategies, stress, and cognitive function:supervised versus unsupervised dieting

The early stages of dieting to lose weight have been associated with neuro-psychological impairments. Previous work has not elucidated whether these impairments are a function solely of unsupported or supported dieting. Raised cortico-steroid levels have been implicated as a possible causal mechanism. Healthy, overweight, pre-menopausal women were randomised to one of three conditions in which they dieted either as part of a commercially available weight loss group, dieted without any group support or acted as non-dieting controls for 8 weeks. Testing occurred at baseline and at 1, 4 and 8 weeks post baseline. During each session, participants completed measures of simple reaction time, motor speed, vigilance, immediate verbal recall, visuo-spatial processing and (at Week 1 only) executive function. Cortisol levels were gathered at the beginning and 30 min into each test session, via saliva samples. Also, food intake was self-recorded prior to each session and fasting body weight and percentage body fat were measured at each session. Participants in the unsupported diet condition displayed poorer vigilance performance (p=0.001) and impaired executive planning function (p=0.013) (along with a marginally significant trend for poorer visual recall (p=0.089)) after 1 week of dieting. No such impairments were observed in the other two groups. In addition, the unsupported dieters experienced a significant rise in salivary cortisol levels after 1 week of dieting (p<0.001). Both dieting groups lost roughly the same amount of body mass (p=0.011) over the course of the 8 weeks of dieting, although only the unsupported dieters experienced a significant drop in percentage body fat over the course of dieting (p=0.016). The precise causal nature of the relationship between stress, cortisol, unsupported dieting and cognitive function is, however, uncertain and should be the focus of further research. © 2005 Elsevier Ltd. All rights reserved.

Perspective work on optical fibre sensors

Optical fibre based sensors are transforming industry by permitting monitoring in hitherto inaccessible environments or measurement approaches that cannot be reproduced using conventional electronic sensors. A multitude of techniques have been developed to render the fibres sensitive to a wide range of parameters including: temperature, strain, pressure (static and dynamic), acceleration, rotation, gas type, and specific biochemical species. Constructed entirely of glass or polymer material, optical fibre devices like fibre gratings offer the properties: low loss, dielectric construction, small size, multiplexing, and so on [1-3]. In this paper, the authors will show the latest developing industrial applications, using polymer optical fibre (POF) devices, and comparing their performance with silica optical fibre devices. The authors address two pressing commercial requirements. The first concerns the monitoring of fuel level in civil aircraft. There is a strong motivation in the aerospace industry to move away from electrical sensors, especially in the fuel system. This is driven by the need to eliminate potential ignition hazards, the desire to reduce cabling weight and the need to mitigate the effects of lightning strikes in aircraft where the conventional metallic skin is increasingly being replaced by composite materials. In this case, the authors have developed pressure sensors based on a diaphragm in which a polymer fibre Bragg grating (POFBG) has been embedded [3]. These devices provide high pressure sensitivity enabling level measurement in the mm range. Also, it has developed an approach incorporating several such sensors which can compensate for temperature drifts and is insensitive to fluid density. Compared with silica fibre-based sensors, their performance is highly enhanced. Initial results have attracted the interest of Airbus from UK, who is keen to explore the potential of optical technology in commercial aircraft. The second concerns the monitoring of acoustic signals and vibration in the subsea environment, for applications in geophysical surveying and security (detection of unwanted craft or personnel). There is strong motivation to move away from electrical sensors due to the bulk of the sensor and associated cabling and the impossibility of monitoring over large distances without electrical amplification. Optical approaches like optical hydrophones [5] offer a means of overcoming these difficulties. In collaboration with Kongsberg from Norway, the authors will exploit the sensitivity improvements possible by using POF instead of silica fibre. These improvements will arise as a result of the much more compliant nature of POF compared to silica fibre (3 GPa vs 72 GPa, respectively). Essentially, and despite the strain sensitivity of silica and POFBGs being very similar, this renders the POF much more sensitive to the applied stress resulting from acoustic signals or vibration. An alternative way of viewing this is that the POF is better impedance-matched to the surrounding environment (water for the intended applications), because although its impedance is higher than that of water, it is nearly an order of magnitude smaller than that of silica. Finally, other future industrial applications will be presented and discussed, showing the vast range of the optical fiber devices in sensing applications.

Stress, burnout and coping strategies in the emergency and intensive care hospital departments

Doctors and nurses working at the accident and emergency (A&E), and intensive care departments are at risk of burnout. They often spend substantial time in intense interactions with other people, centered on patients? health problems (physical, psychological and social) that may lead to feelings of anger, anxiety and frustration, and eventually to burnout. Burnout is a syndrome of emotional exhaustion, depersonalization and reduced personal accomplishment (Maslach & Jackson, 1981) The purpose of this chapter is to assess work stressors, burnout and stress-coping mechanisms among doctors and nurses at the A&E and intensive care departments. A quantitative design using the survey approach was used to collect data from a sample of 200 participants with a response rate of 71% (n=154) Work stressors were associated with burnout in both doctors and nurses. Workload was the most salient work stressor in the sample. Nurses experienced more stress (M=1.5, SD=0.4) than doctors (M=1.2, SD=0.4) in all the work stressor variables examined. The A&E department was reported as more stressful than the intensive care department. Avoidance-oriented and task-oriented coping were the most and the least frequently reported coping strategies respectively. Additionally, only emotion-oriented coping strategy was significantly different between doctors and nurses, and this strategy was also significantly positively correlated with all the variables in the adapted nursing stress scale, and the three burnout variables. Death and dying was most strongly correlated with emotion-oriented coping. This chapter provides an assessment of stress, burnout and coping experienced by both doctors and nurses within the A&E and intensive care departments. Methods that may mitigate stress in these environments may be adequate staffing, supportive management, stress management programs, as well as improvement in communication strategies between doctors and nurses.

Well-structured teams and the buffering of hospital employees from stress

Membership in well-structured teams, which show clarity in team and individual goals, meet regularly, and recognize diverse skills of their members, is known to reduce stress. This study examined how membership of well-structured teams was associated with lower levels of strain, when testing a work stressors-to-strains relationship model across the three levels of team structure, namely well-structured, poorly structured (do not fulfill all the criteria of well-structured teams) and no team. The work stressors tested, were quantitative overload and hostile environment, whereas strains were measured through job satisfaction and intention to leave job. This investigation was carried out on a random sample of 65,142 respondents in acute/specialist National Health Service hospitals across the UK. Using multivariate analysis of variance, statistically significant differences between means across the three groups of team structure, with mostly moderate effect sizes, were found for the study variables. Those in well-structured teams have the highest levels of job satisfaction and the least intention to leave job. Multigroup structural equation modelling confirmed the model's robustness across the three groups of team structure. Work stressors explained 45%, 50% and 65% of the variance of strains for well-structured, poorly structured and no team membership, respectively. An increase of one standard deviation in work stressors, resulted in an increase in 0.67, 0.70 and 0.81 standard deviations in strains for well-structured, poorly structured and no team membership, respectively. This investigation is an eye-opener for hospitals to work towards achieving well-structured teams, as this study shows weaker stressor-to-strain relationships for members of these teams.

Crack tip stress study for elastic-perfectly plastic materials with some applications

The problems of plasticity and non-linear fracture mechanics have been generally recognized as the most difficult problems of solid mechanics. The present dissertation is devoted to some problems on the intersection of both plasticity and non-linear fracture mechanics. The crack tip is responsible for the crack growth and therefore is the focus of fracture science. The problem of crack has been studied by an army of outstanding scholars and engineers in this century, but has not, as yet, been solved for many important practical situations. The aim of this investigation is to provide an analytical solution to the problem of plasticity at the crack tip for elastic-perfectly plastic materials and to apply the solution to a classical problem of the mechanics of composite materials.^ In this work, the stresses inside the plastic region near the crack tip in a composite material made of two different elastic-perfectly plastic materials are studied. The problems of an interface crack, a crack impinging an interface at the right angle and at arbitrary angles are examined. The constituent materials are assumed to obey the Huber-Mises yielding condition criterion. The theory of slip lines for plane strain is utilized. For the particular homogeneous case these problems have two solutions: the continuous solution found earlier by Prandtl and modified by Hill and Sokolovsky, and the discontinuous solution found later by Cherepanov. The same type of solutions were discovered in the inhomogeneous problems of the present study. Some reasons to prefer the discontinuous solution are provided. The method is also applied to the analysis of a contact problem and a push-in/pull-out problem to determine the critical load for plasticity in these classical problems of the mechanics of composite materials.^ The results of this dissertation published in three journal articles (two of which are under revision) will also be presented in the Invited Lecture at the 7$\rm\sp{th}$ International Conference on Plasticity (Cancun, Mexico, January 1999). ^

Comparative analysis of a moderating and mediating model of stress, appraisal, and coping in Hispanic and non-Hispanic Alzheimer's disease caregivers

This dissertation utilizes a cross-sectional study to examine the phenomenon of caregiving within a theoretically grounded stress, appraisal, and coping model. Hispanic and non-Hispanic caregivers were studied to examine the factors associated with variance in caregiver appraisal, coping, and outcomes of caregiving strain (depression and somatic complaints) and caregiving gain (life satisfaction, mastery, and personal gain). A purposive sampling strategy was used to recruit 204 Alzheimer's disease caregivers in South Florida. A self-report questionnaire was used to collect demographic data, and to measure stress, appraisal, coping, and psychological well-being of caregivers. Regression equations were developed to compare moderating and mediating models of appraisal and coping. Emotion-focused coping skills were found to significantly moderate the effects of stress (F [1,195] = 4.62, p < .05), explaining approximately 21% of the variance in satisfaction was found to moderate the effects of stress (F [1,195] = 7.09; p < .05), explaining approximately 27% of the variance in personal gain and approximately 8% of the variance in life satisfaction (F [1,195] = 4.14; p < .05). Appraisal of Burden was found to significantly mediate the effects of stress, explaining approximately 30% of the variance in somatic complaints (F [1,196] = 31.60; p < .001) and 32% of the variance in depression (F [1,196] = 38.18; p < .001). The results of the analyses indicate that appraisal and coping skills are important variables in the stress process. The results of this study underscore the importance of accounting for positive and negative outcomes in providing a fuller understanding of the stress, appraisal and coping process of Alzheimer's Disease caregivers. ^

Coral Thermal Tolerance: Tuning Gene Expression to Resist Thermal Stress

The acclimatization capacity of corals is a critical consideration in the persistence of coral reefs under stresses imposed by global climate change. The stress history of corals plays a role in subsequent response to heat stress, but the transcriptomic changes associated with these plastic changes have not been previously explored. In order to identify host transcriptomic changes associated with acquired thermal tolerance in the scleractinian coralAcropora millepora, corals preconditioned to a sub-lethal temperature of 3°C below bleaching threshold temperature were compared to both non-preconditioned corals and untreated controls using a cDNA microarray platform. After eight days of hyperthermal challenge, conditions under which non-preconditioned corals bleached and preconditioned corals (thermal-tolerant) maintained Symbiodinium density, a clear differentiation in the transcriptional profiles was revealed among the condition examined. Among these changes, nine differentially expressed genes separated preconditioned corals from non-preconditioned corals, with 42 genes differentially expressed between control and preconditioned treatments, and 70 genes between non-preconditioned corals and controls. Differentially expressed genes included components of an apoptotic signaling cascade, which suggest the inhibition of apoptosis in preconditioned corals. Additionally, lectins and genes involved in response to oxidative stress were also detected. One dominant pattern was the apparent tuning of gene expression observed between preconditioned and non-preconditioned treatments; that is, differences in expression magnitude were more apparent than differences in the identity of genes differentially expressed. Our work revealed a transcriptomic signature underlying the tolerance associated with coral thermal history, and suggests that understanding the molecular mechanisms behind physiological acclimatization would be critical for the modeling of reefs in impending climate change scenarios.

Individuals with mental disabilities: perceptions of work limitations

This research investigates the perceptions that individuals with mental illnesses have about the employment experience as a whole. Survey data from 72 respondents with mental disabilities were used to identify areas of perceived work limitations. Comparisons regarding employee work performance were made between eleven individuals with mental disabilities and their supervisors. Functional limitations identified by respondents with mental disabilities and the characteristic symptoms set forth in the Diagnostic and Statistical Manual of Mental Disorders were compared. Overall findings showed that individuals with mental disabilities in this study had problems in the areas of judgment, initiative, interacting and rapport with co-workers and supervisors, frustration tolerance and coping with job stress, and adapting to changes at work. Comparison of identified work task difficulties with diagnostic criteria indicate active symptomatology to have an effect on job performance. Recommendations regarding occupational therapy assessment approaches and roles to facilitate ADA implementation are presented.