917 resultados para vibration damper
Resumo:
The present paper focuses on a damage identification method based on the use of the second order spectral properties of the nodal response processes. The explicit dependence on the frequency content of the outputs power spectral densities makes them suitable for damage detection and localization. The well-known case study of the Z24 Bridge in Switzerland is chosen to apply and further investigate this technique with the aim of validating its reliability. Numerical simulations of the dynamic response of the structure subjected to different types of excitation are carried out to assess the variability of the spectrum-driven method with respect to both type and position of the excitation sources. The simulated data obtained from random vibrations, impulse, ramp and shaking forces, allowed to build the power spectrum matrix from which the main eigenparameters of reference and damage scenarios are extracted. Afterwards, complex eigenvectors and real eigenvalues are properly weighed and combined and a damage index based on the difference between spectral modes is computed to pinpoint the damage. Finally, a group of vibration-based damage identification methods are selected from the literature to compare the results obtained and to evaluate the performance of the spectral index.
Resumo:
In this study, Ag:SiC nanocermets were prepared via rapid thermal annealing (RTA) of pulsed laser-deposited SiC/Ag/SiC trilayers grown on Si substrate. Atomic force microscope images show that silver nanoparticles (Ag NPs) are formed after RTA, and the size of NPs increases with increasing Ag deposition time (t Ag). Sharp dip observed in the reflectance spectra confirmed the existence of Ag surface plasmons (SPs). The infrared transmission spectra showed an intense and broad absorption band around 780–800 cm−1 that can be assigned to Si-C stretching vibration mode. Influence of t Ag on the spectral characteristics of SP-enhanced photoluminescence (PL) and electrical properties of silicon carbide (SiC) films has been investigated. The maximum PL enhancement by 5.5 times for Ag:SiC nanocermets is achieved when t Ag ≈ 50 s. This enhancement is due to the strong resonant coupling between SiC and the SP oscillations of the Ag NPs. Presence of Ag NPs in SiC also induces a forming-free resistive switching with switching ratio of 2 × 10−2. The analysis of I–V curves demonstrates that the trap-controlled space-charge-limited conduction with filamentary model is the governing mechanism for the resistive switching in nanocerment thin films.
Resumo:
Dissertação de mestrado em Structural Analysis of Monuments and Historical Constructions
Resumo:
Tese de Doutoramento (Programa Doutoral em Engenharia Biomédica)
Resumo:
"Series title: Springerbriefs in applied sciences and technology, ISSN 2191-530X"
Resumo:
Powder, flow behaviour, vibration, shear testing
Resumo:
During 1952 and 1953 the author observed that radish, Raphanus sativus, L, developed rapidily in the warmer and damper period of the year and endured the lower temperatures. The yiel of leaves counted from 20 to 40% of the plant weigth.
Resumo:
We describe the mating behavior of Adelosgryllus rubricephalus Mesa & Zefa, 2004. In trials carried out in laboratory we verified the following mating sequence: (1) sexual recognition by antennation; (2) courtship with male turning his abdomen towards the female, performing mediolateral antennae vibration, jerking its body antero-posteriorly and stridulating intermittently, while receptive female drums on the male's abdomen tip, cerci and hind-tibia with her palpi or foretarsi; the male then stops and stays motionless for some seconds, extrudes the spermatophore and both restart the behavioral sequence described above; (3) copulation: male underneath female; with his tegmina inclined forward, and joins his genitalia to the female's to promote sperm transference ; the female steps off the male, occurring a brief end-to-end position; (4) postcopulation: without guarding behavior; male retains the spermatophore and eats it. We quantified elapsed time of each behavioral sequence and discussed its implications in the observed mating behavior.
Resumo:
Recognition by the T-cell receptor (TCR) of immunogenic peptides (p) presented by Class I major histocompatibility complexes (MHC) is the key event in the immune response against virus-infected cells or tumor cells. A study of the 2C TCR/SIYR/H-2K(b) system using a computational alanine scanning and a much faster binding free energy decomposition based on the Molecular Mechanics-Generalized Born Surface Area (MM-GBSA) method is presented. The results show that the TCR-p-MHC binding free energy decomposition using this approach and including entropic terms provides a detailed and reliable description of the interactions between the molecules at an atomistic level. Comparison of the decomposition results with experimentally determined activity differences for alanine mutants yields a correlation of 0.67 when the entropy is neglected and 0.72 when the entropy is taken into account. Similarly, comparison of experimental activities with variations in binding free energies determined by computational alanine scanning yields correlations of 0.72 and 0.74 when the entropy is neglected or taken into account, respectively. Some key interactions for the TCR-p-MHC binding are analyzed and some possible side chains replacements are proposed in the context of TCR protein engineering. In addition, a comparison of the two theoretical approaches for estimating the role of each side chain in the complexation is given, and a new ad hoc approach to decompose the vibrational entropy term into atomic contributions, the linear decomposition of the vibrational entropy (LDVE), is introduced. The latter allows the rapid calculation of the entropic contribution of interesting side chains to the binding. This new method is based on the idea that the most important contributions to the vibrational entropy of a molecule originate from residues that contribute most to the vibrational amplitude of the normal modes. The LDVE approach is shown to provide results very similar to those of the exact but highly computationally demanding method.
Resumo:
Este proyecto tiene como objetivo estudiar la viabilidad de la implantación del Distintivo de Garantía de Calidad Ambiental (DGQA) en los hoteles de 3*, 4* y 5* del municipio de Sitges, perteneciente a la comarca del Garraf. El criterio de selección se ha basado en el estado del hotel (abierto o cerrado) en que se encontraba en el momento del estudio. Para conocer la gestión ambiental de los establecimientos hoteleros se llevó a cabo la realización de unas encuestas elaboradas a partir de los criterios requeridos por el DGQA, tanto obligatorios como opcionales. Los resultados obtenidos muestran un elevado cumplimiento de la puntuación obligatoria, así como la totalidad de los criterios opcionales requeridos. No se han detectado diferencias significativas entre las tres categorías hoteleras. Sin embargo, sí que aparecen diferencias entre los ámbitos propuestos por el DGQA, destacando el elevado cumplimiento en integración paisajística, ruidos y vibraciones, y diseño de espacios exteriores. Por el contrario se observa una carencia relevante en los ámbitos de compras y residuos. Finalmente se han propuesto las acciones de mejora necesarias para dicha obtención, obteniendo así un presupuesto aproximado para la consecución del distintivo por cada uno de los hoteles.
Resumo:
The way in which vectors distribute themselves amongst their hosts has important epidemiological consequences. While the role played by active host choice is largely unquestioned, current knowledge relates mostly to the innate response of vectors towards stimuli signalling the presence or quality of their hosts. Many of those cues, however, can be unpredictable, and therefore prevent the incorporation of the appropriate response into the vector's behavioural repertoire unless some sort of associative learning is possible. We performed a wide range of laboratory experiments to test the learning abilities of the mosquito, Aedes aegypti. Mosquitoes were exposed to choice procedures in (1) an olfactomenter and (2) a 'visual arena'. Our goal was to determine whether the mosquitoes were able to associate unconditional stimuli (blood feeding, human breath, vibration and electrical shock) with particular odours (citral, carvone, citronella oil and eugenol) and visual patterns (horizontal or vertical black bars) to which they had been previously observed to be responsive. We found no evidence supporting the hypothesis that associative learning abilities are present in adult Ae. aegypti. We discuss the possibilities that the assays employed were either inappropriate or insufficient to detect associative learning, or that associative learning is not possible in this species.
Resumo:
A decentralized model reference controller is designed to reduce the magnitude of the transversal vibration of a flexible cable-stayed beam structure induced by a seismic excitation. The controller design is made based on the principle of sliding mode such that a priori knowledge
Resumo:
The two objectives of this study, based on a sample of 1398 Swiss army conscripts born in 1966 who participated in a first study in 1985, were to measure the prevalence of low back pain (LBP) at age 26 years and its incidence between 19 and 26 years and to analyze the relationship between LBP and occupational, nonoccupational, or physical risk factors. The lifetime prevalence of LBP at age 26 was 69.1% and the incidence of LBP between 19 and 26, 44.7%. A history of LBP or a pathological physical examination result at age 19 did not predict the prevalence or the incidence at age 26. Standing, twisting, vibration, and heavy work were significantly associated with chronic LBP and/or the 1-year prevalence of LBP at age 26 (P<0.05). The evolution of sport and leisure-time activities from age 19 to 26 did not differ between people with or without LBP. The ergonomic organization of the workplace should represent a major element of future strategies to prevent LBP.
Resumo:
Premature deterioration of slip formed portland cement concrete (PCC) barriers is an ongoing problem in the Iowa Primary and Interstate highway system. The requirement to have a concrete mix which can be sufficiently pliable to be readily molded into the barrier shape and yet be sufficiently stiff to maintain a true shape and height immediately after molding is difficult to meet. A concrete mix which is stiff enough to maintain its shape immediately after molding is usually difficult to work with. It often contains open or hidden tears and large voids. One way to minimize the molding resistance is by additional vibration. If intensive vibration is applied, the entrapped air voids and tears in the concrete can usually be eliminated, however, in that process, the essential entrained air content can also be lost. In the evaluation of slip formed PCC barriers, it is common to find large voids, tears and a low entrained air content, all contributing to premature deterioration. A study was initiated to evaluate core samples taken from good and from bad appearing areas of various median barriers. Evaluations were done covering visual appearance, construction information, air content and chloride content.