The Economics of Oil, Biofuel and Food Commodities

Nous étudions l'effet sur le marché des aliments de l'introduction sur le marché de l'énergie de biocarburants, comme substitut aux combustibles fossiles. Nous supposons une économie où cohabitent sur le marché de l'énergie un cartel pétrolier et une frange compétitive de cultivateurs qui produit de l'énergie sous forme de biocarburant. Les cultivateurs produisent également des produits agricoles qu'ils vendent sur le marché des aliments. Nous caractérisons la relation qui en résulte entre le prix de l'énergie et le prix des aliments, ainsi que le sentier d'extraction du cartel pétrolier et le sentier de prix de l'énergie. Il est démontré que le prix des aliments va croître aussi longtemps que le stock de pétrole n'est pas épuisé, et cela que la population soit croissante ou non. Il continuera à croître une fois le stock de pétrole épuisé si la population est croissante. Les effets de l'amélioration dans la productivité de la terre dans la production d'aliments ainsi que dans la production de biocarburant sont analysés.

Essays on oil price fluctuations and macroeconomic activity

Dans cette thèse, je me suis intéressé aux effets des fluctuations du prix de pétrole sur l'activité macroéconomique selon la cause sous-jacente ces fluctuations. Les modèles économiques utilisés dans cette thèse sont principalement les modèles d'équilibre général dynamique stochastique (de l'anglais Dynamic Stochastic General Equilibrium, DSGE) et les modèles Vecteurs Autorégressifs, VAR. Plusieurs études ont examiné les effets des fluctuations du prix de pétrole sur les principaux variables macroéconomiques, mais très peu d'entre elles ont fait spécifiquement le lien entre les effets des fluctuations du prix du pétrole et la l'origine de ces fluctuations. Pourtant, il est largement admis dans les études plus récentes que les augmentations du prix du pétrole peuvent avoir des effets très différents en fonction de la cause sous-jacente de cette augmentation. Ma thèse, structurée en trois chapitres, porte une attention particulière aux sources de fluctuations du prix de pétrole et leurs impacts sur l'activité macroéconomique en général, et en particulier sur l'économie du Canada. Le premier chapitre examine comment les chocs d'offre de pétrole, de demande agrégée, et de demande de précaution de pétrole affectent l'économie du Canada, dans un Modèle d'équilibre Général Dynamique Stochastique estimé. L'estimation est réalisée par la méthode Bayésienne, en utilisant des données trimestrielles canadiennes sur la période 1983Q1 à 2010Q4. Les résultats montrent que les effets dynamiques des fluctuations du prix du pétrole sur les principaux agrégats macro-économiques canadiens varient en fonction de leurs sources. En particulier, une augmentation de 10% du prix réel du pétrole causée par des chocs positifs sur la demande globale étrangère a un effet positif significatif de l'ordre de 0,4% sur le PIB réel du Canada au moment de l'impact et l'effet reste positif sur tous les horizons. En revanche, une augmentation du prix réel du pétrole causée par des chocs négatifs sur l'offre de pétrole ou par des chocs positifs de la demande de pétrole de précaution a un effet négligeable sur le PIB réel du Canada au moment de l'impact, mais provoque une baisse légèrement significative après l'impact. En outre, parmi les chocs pétroliers identifiés, les chocs sur la demande globale étrangère ont été relativement plus important pour expliquer la fluctuation des principaux agrégats macroéconomiques du Canada au cours de la période d'estimation. Le deuxième chapitre utilise un modèle Structurel VAR en Panel pour examiner les liens entre les chocs de demande et d'offre de pétrole et les ajustements de la demande de travail et des salaires dans les industries manufacturières au Canada. Le modèle est estimé sur des données annuelles désagrégées au niveau industriel sur la période de 1975 à 2008. Les principaux résultats suggèrent qu'un choc positif de demande globale a un effet positif sur la demande de travail et les salaires, à court terme et à long terme. Un choc négatif sur l'offre de pétrole a un effet négatif relativement faible au moment de l'impact, mais l'effet devient positif après la première année. En revanche, un choc positif sur la demande précaution de pétrole a un impact négatif à tous les horizons. Les estimations industrie-par-industrie confirment les précédents résultats en panel. En outre, le papier examine comment les effets des différents chocs pétroliers sur la demande travail et les salaires varient en fonction du degré d'exposition commerciale et de l'intensité en énergie dans la production. Il ressort que les industries fortement exposées au commerce international et les industries fortement intensives en énergie sont plus vulnérables aux fluctuations du prix du pétrole causées par des chocs d'offre de pétrole ou des chocs de demande globale. Le dernier chapitre examine les implications en terme de bien-être social de l'introduction des inventaires en pétrole sur le marché mondial à l'aide d'un modèle DSGE de trois pays dont deux pays importateurs de pétrole et un pays exportateur de pétrole. Les gains de bien-être sont mesurés par la variation compensatoire de la consommation sous deux règles de politique monétaire. Les principaux résultats montrent que l'introduction des inventaires en pétrole a des effets négatifs sur le bien-être des consommateurs dans chacun des deux pays importateurs de pétrole, alors qu'il a des effets positifs sur le bien-être des consommateurs dans le pays exportateur de pétrole, quelle que soit la règle de politique monétaire. Par ailleurs, l'inclusion de la dépréciation du taux de change dans les règles de politique monétaire permet de réduire les coûts sociaux pour les pays importateurs de pétrole. Enfin, l'ampleur des effets de bien-être dépend du niveau d'inventaire en pétrole à l'état stationnaire et est principalement expliquée par les chocs sur les inventaires en pétrole.

Linseed Oil as a Multipurpose Ingredient in NBR Vulcanizate

ABSTRACT: Linseed oil is used in the dual roles of the plasticizer and the fatty acid component of the activator in nitrile rubber vulcanizates. The study shows that the substitution can substantially improve the mechanical properties in addition to other advantages such as increased cure rate, reduced leachability and reduced compound cost.

Rubber Seed Oil: A Multipurpose Additive in NR and SBR Compounds

ABSTRACT: Rubber seed oil was used as a multipurpose ingredient in natural rubber (NR) and styrene butadiene rubber (SBR) compounds. The study shows that the oil, when substituted for conventional plasticiser, imparts excellent mechanical properties to NR and SBR vulcanizates. Further, it also improves aging resistance, reduces cure time, increases abrasion resistance and flex resistance, and reduces blooming.

A Study on the Use of Castor Oil as Plasticizer in Natural Rubber Compounds

Mechanical properties and thermal degradation of natural rubber compounds containing castor oil were studied to evaluate its suitability as plasticizer. Naphthenic oil was used as a reference plasticizer. The cure time was marginally lower in the case of castor oil mixes, probably due to the presence offree fatty acids in it. The tear strength and modulus were better in the case of mixes containing castor oil, while most of the other mechanical properties were comparable to the mixes containing naphthenic oil. The heat build up and compression set were higher than that of the naphthenic oil mixes. Thermal studies showed an increase of 8 °C in the temperature of initiation of degradation and an increase of 6 °C in the temperature at which the peak rate of degradation occurred. The peak rate of degradation was comparable to that of the reference compound

A Study on the Use of Coconut Oil as Plasticiser in Natural Rubber Compounds

Mechanical properties and thermal degradation characteristics of natural rubber compounds captaining coconut oil were compared with that of a control compound containing naphthenic oil. Cure time was marginally lower in the case of coconut oil mixes, probably due to the presence of free fatty acids. Tensile strength , tear strength, resilience and abrasion resistance were better than the naphthenic oil-based compounds . Compression set and hardness were marginally inferior The coconut oil mixes had a crosslink density comparable to that of the reference compound. Thermal studies showed that the temperature of initiation of degradation was increased by 10°C and the temperature at which the peak rate of degradation occured was increased by 7°C. The peak rate of degradation was compa rable to the control compound.

Fibre optic sensor for the detection of adulterant traces in coconut oil

The design and development of a fibre optic evanescent wave refractometer for the detection of trace amounts of paraffin oil and palm oil in coconut oil is presented. This sensor is based on a side-polished plastic optical fibre. At the sensing region, the cladding and a small portion of the core are removed and the fibre nicely polished. The sensing region is fabricated in such a manner that it sits perfectly within a bent mould. This bending of the sensing region enhances its sensitivity. The oil mixture of different mix ratios is introduced into the sensing region and we observed a sharp decrease in the output intensity. The observed variation in the intensity is found to be linear and the detection limit is 2% (by volume) paraffin oil/palm oil in coconut oil. The resolution of this refractometric sensor is of the order of 10−3. Since coconut oil is consumed in large volumes as edible oil in south India, this fibre optic sensor finds great relevance for the detection of adulterants such as paraffin oil or palm oil which are readily miscible in coconut oil. The advantage of this type of sensor is that it is inexpensive and easy to set up. Another attraction of the side-polished fibre is that only a very small amount of analyte is needed and its response time is only 7 s.

ANALYSIS, MODIFICATION, AND EVALUATION OF THE COLD FLOW PROPERTIES OF VEGETABLE OILS AS BASE OIL FOR INDUSTRIAL LUBRICANTS

Poor cold flow properties of vegetable oils are a major problem preventing the usage of many abundantly available vegetable oils as base stocks for industrial lubricants. The major objective of this research is to improve the cold flow properties of vegetable oils by various techniques like additive addition and different chemical modification processes. Conventional procedure for determining pour point is ASTM D97 method. ASTM D97 method is time consuming and reproducibility of pour point temperatures is poor between laboratories. Differential Scanning Calorimetry (DSC) is a fast, accurate and reproducible method to analyze the thermal activities during cooling/heating of oil. In this work coconut oil has been chosen as representative vegetable oil for the analysis and improvement cold flow properties since it is abundantly available in the tropics and has a very high pour point of 24 °C. DSC is used for the analysis of unmodified and modified vegetable oil. The modified oils (with acceptable pour points) were then subjected to different tests for the valuation of important lubricant properties such as viscometric, tribological (friction and wear properties), oxidative and corrosion properties.A commercial polymethacrylate based PPD was added in different percentages and the pour points were determined in each case. Styrenated phenol(SP) was added in different concentration to coconut oil and each solution was subjected to ASTM D97 test and analysis by DSC. Refined coconut oil and other oils like castor oil, sunflower oil and keranja oil were mixed in different proportions and interesterification procedure was carried out. Interesterification of coconut oil with other vegetable oils was not found to be effective in lowering the pour point of coconut oil as the reduction attained was only to the extent of 2 to 3 °C.Chemical modification by acid catalysed condensation reaction with coconut oil castor oil mixture resulted in significant reduction of pour point (from 24 ºC to -3 ºC). Instead of using triacylglycerols, when their fatty acid derivatives (lauric acid- the major fatty acid content of coconut oil and oleic acid- the major fatty acid constituents of monoand poly- unsaturated vegetable oils like olive oil, sunflower oil etc.) were used for the synthesis , the pour point could be brought down to -42 ºC. FTIR and NMR spectroscopy confirmed the ester structure of the product which is fundamental to the biodegradability of vegetable oils. The tribological performance of the synthesised product with a suitable AW/EP additive was comparable to the commercial SAE20W30 oil. The viscometric properties (viscosity and viscosity index) were also (with out additives) comparable to commercial lubricants. The TGA experiment confirmed the better oxidative performance of the product compared to vegetable oils. The sample passed corrosion test as per ASTM D130 method.

POPULATION GENETIC STUDIES ON THE OIL SARDINE ( Sardinella longiceps )

The objective of present investigation was to study the population genetic structure of S. longiceps by applying three different basic population genetic techniques such as cytogenetics, non-enzymatic biochemicalgenetics (general protein) and morphomeristics/metrics.

Effects of the Piscicides, Mahua Oil Cake and Croton Seed on the Prawn Culture System

Department of Marine Biology, Microbiology and Biochemistry

BIOCHEMICAL GENETIC STUDIES ON THE OIL SARDINE, Sardinella longiceps (CUVIER AND VALENCIENNES, 1847) FROM SELECTED CENTRES OF THE WEST COAST OF INDIA

The main objective of the present investigation was to study the biochemical genetic variability within the species and genetic structure of its regional populations from west coast. Realising the recent report of occurrence of oil sardine fishery in east coast of India, population samples from Mandapam and Madras were also included in the present investigation. The original data gathered on the population genetics of the species have helped to interpret and evaluate the results objectively. The important conclusions drawn from a detailed discussions on the subject would throw some light on the probable process of problematic fluctuations in the abundance of oil sardine fishery of India. The academic and applied values of present discoveries need not be emphasised. The data used for the doctoral thesis were generated during the ICAR ad-hoc project on the "Population genetic studies on oil sardine, sardinella longiceps to identity distinct genetic stocks", carried out at CMFRI, Cochin during the years, 1988-1991

Bioremediation of petroleum sludge through Phytoremediation.Land farming and Microbial enhanced oil separation

The objective of this research is to study the feasibility of bioremediating the oily sludge from a refinery site. Three different methods of waste treatment were tried i.e. phytoremediation, land farming and microbial enhanced oil separation in laboratory scale treatment systems. A multiprocess approach by combination of phytoremediation, biostimulation and microbial enhanced oil separation is also presented. The methods of analysis, experimental procedure, and results are incorporated into five chapters of this thesis entitled "Bioremediation of petroleum sludge through phytoremediation, land farming and microbial enhanced oil separation.

Combined toxic effects of oil and pesticides on selected marine invertebrates

In recent years, pollution in general and sea water pollution in particular, has become an important topic for national and international considerations. Because of its impact on society, marine pollution has attracted great attention from politicians, administrators, natural scientists and technologists all over the world. To save our environment from further deterioration, it is essential to have an assessment of this problem This thesis involves investigation of the lethal and sub lethal effects of four pesticides and two petroleum oil, individually and in combinations on two commercially important bivalves. Among the four pesticides used two are organophosphates and the other two are organochlorines. Synthetic Pesticides, especially organophosphates and organochlorines have become increasingly important additions to chemical wastes polluting natural aquatic Communities special attention is given in the present investigation to delineate the combined toxic effect of oil and pesticides. The results are presented under different sections to make the presentation meaningful.