Evidence for a sub-morphological inflammatory process in the liver in haemochromatosis

Background/Aims: The role of cytokines in hepatic injury has been examined for many liver diseases however little is known of the cytokine involvement in haemochromatosis. The aim of the current study was to examine the hepatic gene expression of potential proinflammatory and profibrogenic cytokines in haemochromatosis. Methods: Interferon-gamma, interleukin-10, transforming growth factor-beta(1) and tumor necrosis factor-alpha mRNA expression was assessed in liver tissue from 20 haemochromatosis patients, eight controls and eight chronic hepatitis C patients. To assess the immunophenotype of the inflammatory infiltrate in haemochromatosis, liver sections were subjected to immunohistochemistry using markers for macrophages (CD68, HAM56, MAC387) or T cells (CD3 and CD45RO). Results: Interferon-gamma mRNA was increased in both haemochromatosis (0.29+/-0.08%, P=0.01) and hepatitis C patients (1.02+/-0.32%, P=0.03) compared to controls (0.04+/-0.01%). Interleukin-10 mRNA was significantly decreased in both haemochromatosis and hepatitis C patients (0.01+/-0.003%, P=0.008 and 0.03+/-0.015%, P=0.02, respectively) compared to controls (0.12+/-0.01%). CD3 positive T-cell number was significantly correlated with increasing hepatic iron concentration (r=0.56, P=0.03). Conclusions: This study has demonstrated a distinct pattern of cytokine gene expression in haemochromatosis, which resembles that of inflammatory conditions such as chronic hepatitis C. These factors may play a role in the development of iron-induced hepatic fibrosis in haemochromatosis. (C) 2003 European Association for the Study of the Liver. Published by Elsevier Science B.V. All rights reserved.

Genetic disruption of the growth hormone receptor does not influence motoneuron survival in the developing mouse

In the rodent central nervous system (CNS) during the five days prior to birth, both growth hormone (GH) and its receptor (GHR) undergo transient increases in expression to levels considerably higher than those found postnatally. This increase in expression coincides with the period of neuronal programmed cell death (PCD) in the developing CNS. To evaluate the involvement of growth hormone in the process of PCD, we have quantified the number of motoneurons in the spinal cord and brain stem of wild type and littermate GHR-deficient mice at the beginning and end of the neuronal PCD period. We found no change in motoneuron survival in either the brachial or lumbar lateral motor columns of the spinal cord or in the trochlear, trigeminal, facial or hypoglossal nuclei in the brain stem. We also found no significant differences in spinal cord volume, muscle fiber diameter, or body weight of GHR-deficient fetal mice when compared to their littermate controls. Therefore, despite considerable in vitro evidence for GH action on neurons and glia, genetic disruption of GHR signalling has no effect on prenatal motoneuron number in the mouse, under normal physiological conditions. This may be a result of compensation by the signalling of other neurotrophic cytokines.

An advanced method for eliminating impacts from frequency deviations in power system signal processing

Frequency deviation is a common problem for power system signal processing. Many power system measurements are carried out in a fixed sampling rate assuming the system operates in its nominal frequency (50 or 60 Hz). However, the actual frequency may deviate from the normal value from time to time due to various reasons such as disturbances and subsequent system transients. Measurement of signals based on a fixed sampling rate may introduce errors under such situations. In order to achieve high precision signal measurement appropriate algorithms need to be employed to reduce the impact from frequency deviation in the power system data acquisition process. This paper proposes an advanced algorithm to enhance Fourier transform for power system signal processing. The algorithm is able to effectively correct frequency deviation under fixed sampling rate. Accurate measurement of power system signals is essential for the secure and reliable operation of power systems. The algorithm is readily applicable to such occasions where signal processing is affected by frequency deviation. Both mathematical proof and numerical simulation are given in this paper to illustrate robustness and effectiveness of the proposed algorithm. Crown Copyright (C) 2003 Published by Elsevier Science B.V. All rights reserved.

Online titrimetric and off-gas analysis for examining nitrification processes in wastewater treatment

The two steps of nitrification, namely the oxidation of ammonia to nitrite and nitrite to nitrate, often need to be considered separately in process studies. For a detailed examination, it is desirable to monitor the two-step sequence using online measurements. In this paper, the use of online titrimetric and off-gas analysis (TOGA) methods for the examination of the process is presented. Using the known reaction stoichiometry, combination of the measured signals (rates of hydrogen ion production, oxygen uptake and carbon dioxide transfer) allows the determination of the three key process rates, namely the ammonia consumption rate, the nitrite accumulation rate and the nitrate production rate. Individual reaction rates determined with the TOGA sensor under a number of operation conditions are presented. The rates calculated directly from the measured signals are compared with those obtained from offline liquid sample analysis. Statistical analysis confirms that the results from the two approaches match well. This result could not have been guaranteed using alternative online methods. As a case study, the influences of pH and dissolved oxygen (DO) on nitrite accumulation are tested using the proposed method. It is shown that nitrite accumulation decreased with increasing DO and pH. Possible reasons for these observations are discussed. (C) 2003 Elsevier Science Ltd. All rights reserved.

Nitrification of high strength ammonia wastewtaer treatment - process selection is the major factor.

Biological nitrogen removal via the nitrite pathway in wastewater treatment is very important in Saving the cost of aeration and as an electron donor for denitrification. Wastewater nitrification and nitrite accumulation were carried out in a biofilm airlift reactor with autotrophic nitrifying biofilm. The biofilm reactor showed almost complete nitrification and most of the oxidized ammonium was present as nitrite at the ammonium load of 1.5 to 3.5 kg N/m3.d. Nitrite accumulation was stably achieved by the selective inhibition of nitrite oxidizers with free ammonia and dissolved oxygen limitation. Stable 100% conversion to nitrite could also be achieved even under the absence of free ammonia inhibition on nitrite oxidizers. Batch ammonium oxidation and nitrite oxidation with nitrite accumulating nitrifying biofilm showed that nitrite Oxidation was completely inhibited when free ammonia is higher than 0.2 mg N/L. However, nitrite oxidation activity was recovered as soon as the free ammonia concentration was below the threshold level when dissolved oxygen concentration was not the limiting factor. Fluorescence in situ hybridization analysis of cryosectioned nitrite accumulating nitrifying biofilm showed that the β-subclass of Proteobacteria, where ammonia oxidizers belong, was distributed outside the biofilm whereas the α-subclass of Proteobacteria, where nitrite oxidizers belong, was found mainly in the inner part of the biofilm. It is likely that dissolved oxygen deficiency or limitation in the inner part of the nitrifying biofilm, where nitrite oxidizers exist, is responsible for the complete shut down of the nitrite oxidizers activity under the absence of free ammonia inhibition.

SPAnDX: a process-based population dynamics model to explore management and climate change impacts on an invasive alien plant, Acacia nilotica

This paper describes a process-based metapopulation dynamics and phenology model of prickly acacia, Acacia nilotica, an invasive alien species in Australia. The model, SPAnDX, describes the interactions between riparian and upland sub-populations of A. nilotica within livestock paddocks, including the effects of extrinsic factors such as temperature, soil moisture availability and atmospheric concentrations of carbon dioxide. The model includes the effects of management events such as changing the livestock species or stocking rate, applying fire, and herbicide application. The predicted population behaviour of A. nilotica was sensitive to climate. Using 35 years daily weather datasets for five representative sites spanning the range of conditions that A. nilotica is found in Australia, the model predicted biomass levels that closely accord with expected values at each site. SPAnDX can be used as a decision-support tool in integrated weed management, and to explore the sensitivity of cultural management practices to climate change throughout the range of A. nilotica. The cohort-based DYMEX modelling package used to build and run SPAnDX provided several advantages over more traditional population modelling approaches (e.g. an appropriate specific formalism (discrete time, cohort-based, process-oriented), user-friendly graphical environment, extensible library of reusable components, and useful and flexible input/output support framework). (C) 2003 Published by Elsevier Science B.V.

Dehydration converts DsbG crystal diffraction from low to high resolution

Diffraction quality crystals are essential for crystallographic studies of protein structure, and the production of poorly diffracting crystals is often regarded as a dead end in the process. Here we show a dramatic improvement of poorly diffracting DsbG crystals allowing high-resolution diffraction data measurement. Before dehydration, the crystals are fragile and the diffraction pattern is streaky, extending to 10 Angstrom resolution. After dehydration, there is a spectacular improvement, with the diffraction pattern extending to 2 Angstrom resolution. This and other recent results show that dehydration is a simple, rapid, and inexpensive approach to convert poor quality crystals into diffraction quality crystals.

Purification of post-translationally modified proteins from bacteria: homologous expression and purification of histidine-tagged pilin from Neisseria meningitidis

Until recently, glycosylation of proteins in prokaryotes was regarded as uncommon and thought to be limited to special cases such as S-layer proteins and some archeal outer membrane proteins. Now, there are an increasing number of reports of bacterial proteins that are glycosylated. Pilin of pathogenic Neisseria is one of the best characterised post-translation ally modified bacterial proteins, with four different types of modifications reported, including a novel glycosylation. Pilin monomers assemble to form pilus fibres, which are long protein filaments that protrude from the surface of bacterial cells and are key virulence factors. To aid in the investigation of these modifications, pure pilin is required. A number of pilin purification methods have been published, but none are appropriate for the routine purification of pilin from many different isolates. This study describes a novel, rapid, and simple method of pilin purification from Neisseria meningitidis C311#3, which facilitates the production of consistent quantities of pure, native pilin. A 6 x histidine tag was fused to the C-terminus of the pilin subunit structural gene, pilE, via homologous recombination placing the 6 x histidine-tagged allele in the chromosome of N. meningitidis C311#3. Pilin was purified under non-denaturing conditions via a two-step process using immobilised metal affinity chromatography (IMAC), followed by dye affinity chromatography. Analysis of the purified pilin confirmed that it retained both of the post-translational modifications examined. This novel approach may prove to be a generally applicable method for purification and analysis of post-translationally modified proteins in bacteria. (C) 2003 Elsevier Science (USA). All rights reserved.

A carreira de gestor p??blico e sua forma????o

Apesar de todo investimento nos ??ltimos anos, do poder p??blico, em qualificar profissionais, criar cursos e institui????es para forma????o de gestores p??blicos, o que parece ainda vigorar s??o as indica????es, para os cargos de gestores de unidades de sa??de. A carreira do Gestor P??blico na ??rea de sa??de deve ser feita atrav??s da Escola Nacional de Administra????o P??blica (ENAP), criada para tal fim, nos moldes atuais da carreira de Especialistas em Pol??ticas P??blicas e Gest??o Governamental (EPPGG) ou por outras Escolas como a Escola Nacional de Sa??de P??blica (ENSP). A????es e press??es de atores internacionais interferem na gest??o governamental, levando os governantes a promoverem reformas em suas administra????es visando atender esses interesses. Reformas administrativas ocorreram, em sua maioria, n??o por vontade do governo vigente, mas sim por v??rios fatores, sejam internos ou externos ao pa??s. Devido ao processo de globaliza????o e ao ide??rio neoliberal, que defendiam menor participa????o de interven????o do Estado na economia, reformas administrativas ocorreram e vem ocorrendo. Nos anos recentes, visando responder ??s demandas de novos conhecimentos e tecnologias colocadas pelo sistema de sa??de brasileiro em r??pida transforma????o, foi criado o espa??o institucional na, Escola de Governo em Sa??de (EGS), implantada na ENSP em 1998, dedicada a mobilizar e potencializar os esfor??os institucionais especificamente dirigidos a colaborar com a amplia????o da capacidade de governo em sa??de. Faremos uma breve exposi????o da forma????o de profissionais para a carreira de gest??o p??blica em alguns pa??ses das Am??ricas, mostrando a diversidade dos modelos de Escolas de Governo.

China's proposing behavior in Global Governance: the cases of the WTO Doha Round negotiation and G-20 process

This article examines China's proposals on the reform of global governance, and discusses the main features of China's proposing behavior in the cases of the WTO Doha Round negotiation and G-20 Process. The main findings are: (1) in the critical junctures of global governance reform, China engaged the reform of the global governance institutions proactively, and put forward a series of reform proposals; (2) in proposing behavior, China argued the global governance institutions should be properly adjusted without intention to change the basic principles, refrained from playing a leadership role while proposing jointly with other countries, and upheld the principled idea of pro-development.

The UN peacebuilding process: an analysis of its shortcomings in Timor-Leste

This paper brings a comprehensive analysis of the peacebuilding process conducted by the UN in Timor-Leste. Drawing on fieldwork, interviews, and secondary sources, the paper brings light to the main fragilities of this process. Firstly, the paper briefly outlines the scholarly debate around UN peacebuilding process. Then, the paper brings an overview of the UN missions deployed to Timor-Leste. Finally, the paper identifies the major limitations of such engagement. By highlighting the main flaws of this peacebuilding process, the paper opens the space for (re)thinking alternative ways of building peace in post-conflict scenarios.

Exploring the interdisciplinary process in design education

The work presented herein follows an ongoing research that aims to analyze methodological practices to be applied in Design Education. A reflection about methodological strategies in Design Education and the function of drawing in Design represents the beginning of this study. Then, we developed an interdisciplinary pedagogical experience with the Graphic Design 1st grade students from our institution (IPCA). In the current academic year, 2013/2014, we continue to evolve this project, introducing changes in the initial proposal. Major alterations focused on the aspects that could be strengthened in terms of interdisciplinarity. In this article, the authors describe those changes and discuss the outcomes of the novel proposal. As we have already reported, this investigation follows a reflection about working methods to be adopted in Design Education. This is in accordance with other previously published works that purpose the enlargement of Design into new knowledge fields such as Experience or Service Design, changing not only the role of the graphic designer, but also the skills required to be a professional designer (Alain Findelli, 2001), (Brian Lawson, 2006), (Ciampa-Brewer, 2010). Furthermore, concepts such as cooperation or multidisciplinary design, amongst others, have been frequently debated as design teaching strategies (Heller and Talarico, 2011, pp. 82-85). These educational approaches also have an impact on our research. The analysis of all these authors’ contributions together with a reflection on our teaching practice allowed us to propose an improved interdisciplinary intervention.

The strategic management of creation process and of change: a theoretical contribute from the perspective of tourism

The entrepreneurship and innovation have been gradually gaining ground in the academic community as a field of study. However, the interpretations surrounding fragmented, without a univocal definition. In last decades, tourism has received greater attention from researchers in various sciences, varying only by the different emphases considered: economic, social, cultural and environmental. As other emerging sectors in a modern economy, tourism is a dynamic and ever-changing industry. The study has as purpose to provide a better understanding regarding the essence of entrepreneurship: theoretical and practical implications from the perspective of tourism. Regarding the methodology used here, this is a conceptual paper with a literature review that brings together the major components of entrepreneurship and its implications tourist perspective and conceptual model of the dynamic nature of the Triggering Process and innovation (e.g. iTravey, Interactive Stores, Tourist Transportable Tower).

An Electromagnetic Tracker System for the design of a dental superstructure

Nowadays, different techniques are available for manufacturing full-arch implant-supported prosthesis, many of them based on an impression procedure. Nevertheless, the long-term success of the prosthesis is highly influenced by the accuracy during such process, being affected by factors such as the impression material, implant position, angulation and depth. This paper investigates the feasibility of a 3D electromagnetic motion tracking system as an acquisition method for modeling such prosthesis. To this extent, we propose an implant acquisition method at the patient mouth, using a specific prototyped tool coupled with a tracker sensor, and a set of calibration procedures (for distortion correction and tool calibration), that ultimately obtains combined measurements of the implant’s position and angulation, and eliminating the use of any impression material. However, in the particular case of the evaluated tracking system, the order of magnitude of the obtained errors invalidates its use for this specific application.