BioCondition assessment tool : a mobile application to aid vegetation assessment

Environmental degradation has become increasingly aggressive in recent years due to rapid urban development and other land use pressures. This chapter looks at BioCondition, a newly developed vegetation assessment framework by Queensland Department of Resource Management (DERM) and how mobile technology can assist beginners in conducting the survey. Even though BioCondition is designed to be simple, it is still fairly inaccessible to beginners due to its complex, time consuming, and repetitive nature. A Windows Phone mobile application, BioCondition Assessment Tool, was developed to provide on-site guidance to beginners and document the assessment process for future revision and comparison. The application was tested in an experiment at Samford Conservation Park with 12 students studying ecology in Queensland University of Technology.

Correcting radiation survey data to account for increased leakage during intensity modulated radiotherapy treatments

Purpose Intensity modulated radiotherapy (IMRT) treatments require more beam-on time and produce more linac head leakage to deliver similar doses to conventional, unmodulated, radiotherapy treatments. It is necessary to take this increased leakage into account when evaluating the results of radiation surveys around bunkers that are, or will be, used for IMRT. The recommended procedure of 15 applying a monitor-unit based workload correction factor to secondary barrier survey measurements, to account for this increased leakage when evaluating radiation survey measurements around IMRT bunkers, can lead to potentially-costly over estimation of the required barrier thickness. This study aims to provide initial guidance on the validity of reducing the value of the correction factor when applied to different radiation barriers (primary barriers, doors, maze walls and other walls) by 20 evaluating three different bunker designs. Methods Radiation survey measurements of primary, scattered and leakage radiation were obtained at each of five survey points around each of three different radiotherapy bunkers and the contribution of leakage to the total measured radiation dose at each point was evaluated. Measurements at each survey point were made with the linac gantry set to 12 equidistant positions from 0 to 330o, to 25 assess the effects of radiation beam direction on the results. Results For all three bunker designs, less than 0.5% of dose measured at and alongside the primary barriers, less than 25% of the dose measured outside the bunker doors and up to 100% of the dose measured outside other secondary barriers was found to be caused by linac head leakage. Conclusions Results of this study suggest that IMRT workload corrections are unnecessary, for 30 survey measurements made at and alongside primary barriers. Use of reduced IMRT workload correction factors is recommended when evaluating survey measurements around a bunker door, provided that a subset of the measurements used in this study are repeated for the bunker in question. Reduction of the correction factor for other secondary barrier survey measurements is not recommended unless the contribution from leakage is separetely evaluated.

Polyalanine repeat polymorphism in RUNX2 is associated with site-specific fracture in post-menopausal females

Runt related transcription factor 2 (RUNX2) is a key regulator of osteoblast differentiation. Several variations within RUNX2 have been found to be associated with significant changes in BMD, which is a major risk factor for fracture. In this study we report that an 18bp deletion within the polyalanine tract (17A>11A) of RUNX2 is significantly associated with fracture. Carriers of the 11A allele were found to be nearly twice as likely to have sustained fracture. Within the fracture category, there was a significant tendency of 11A carriers to present with fractures of bones of intramembranous origin compared to bones of endochondral origin (p=0.005). In a population of random subjects, the 11A allele was associated with decreased levels of serum collagen cross links (CTx, p=0.01), suggesting decreased bone turnover. The transactivation function of the 11A allele was quantitatively decreased. Interestingly, we found no effect of the 11A allele on BMD at multiple skeletal sites, although these were not the sites where a relationship with fracture was most evident. These findings suggest that the 11A allele is a biologically relevant polymorphism that influences serum CTx and confers enhanced fracture risk in a site-selective manner related to intramembranous bone ossification.

Self-management of chemotherapy-related nausea and vomiting : a cross-sectional survey of Chinese cancer patients

BACKGROUND Chemotherapy-induced nausea and vomiting (CINV) remain prevalent among cancer patients despite pharmacological advances in CINV therapy. Patients can initiate nonpharmacologic strategies, which potentially play an important role as adjuncts to pharmacological agents in alleviating CINV. Some studies have explored nausea and vomiting self-management (NVSM) behaviors among patients in Western settings; however, little is known about the NVSM behaviors of patients in China. OBJECTIVES This study examines NVSM behaviors of Chinese cancer patients. METHODS A cross-sectional survey was conducted in a specialist cancer hospital in southeast China. RESULTS A sample of 255 cancer patients was recruited. A mean of 8.56 (±3.15) NVSM behaviors was reported. Most NVSM behaviors were rated as moderately effective and were implemented with moderate self-efficacy. Higher distress levels, better functional status, previous similar symptom experiences, receiving chemotherapy as an inpatient, and greater support from multiple levels were related to greater engagement in NVSM; higher self-efficacy levels pertaining to NVSM behaviors were associated with reports of more relief from specific NVSM behaviors. CONCLUSIONS A range of NVSM strategies was initiated by Chinese cancer patients and provided some relief. A range of individual, health status, and environmental factors influenced engagement with and relief from NVSM behaviors. IMPLICATIONS FOR PRACTICE To enhance Chinese patients' NVSM, patients should be supported to engage in behaviors including taking antiemetics, modifying their diet, using psychological strategies, and creating a pleasant environment. The findings highlight the importance of enhancing patients' self-efficacy in NVSM, alleviating symptom distress, and improving social support to achieve better outcomes.

Evaluation of inflow cannulation site for implantation of right-sided rotary ventricular assist device

Right heart dysfunction is one of the most serious complications following implantation of a left ventricular assist device (LVAD), often leading to the requirement for short or long term right ventricular support (RVAD). The inflow cannulation site induces major haemodynamic changes and so there is a need to optimize the site used depending on the patient's condition. Therefore, this study evaluated and compared the haemodynamic influence of right atrial (RAC) and right ventricular (RVC) inflow cannulation sites. An in-vitro, variable heart failure, mock circulation loop was used to compare RAC and RVC in mild and severe biventricular heart failure (BHF) conditions. In the severe BHF condition, higher ventricular ejection fraction (RAC: 13.6%, RVC: 32.7%) and thus improved heart chamber and RVAD washout was observed with RVC, which suggested this strategy might be preferable for long term support (ie. bridge to transplant or destination therapy) to reduce the risk of thrombus formation. In the mild BHF condition, higher pulmonary valve flow (RAC: 3.33 L/min, RVC: 1.97 L/min) and lower right ventricular stroke work (RAC: 0.10 W, RVC: 0.13 W) and volumes were recorded with RAC. These results indicate an improved potential for myocardial recovery, thus RAC should be chosen in this condition. This in-vitro study suggests that RVAD inflow cannulation site should be chosen on a patient-specific basis with a view to the support strategy to promote myocardial recovery or reduce the risk of long-term complications.

The active site behaviour of electrochemically synthesised gold nanomaterials

Even though gold is the noblest of metals, a weak chemisorber and is regarded as being quite inert, it demonstrates significant electrocatalytic activity in its nanostructured form. It is demonstrated here that nanostructured and even evaporated thin films of gold are covered with active sites which are responsible for such activity. The identification of these sites is demonstrated with conventional electrochemical techniques such as cyclic voltammetry as well as a large amplitude Fourier transformed alternating current (FT-ac) method under acidic and alkaline conditions. The latter technique is beneficial in determining if an electrode process is either Faradaic or capacitive in nature. The observed behaviour is analogous to that observed for activated gold electrodes whose surfaces have been severely disrupted by cathodic polarisation in the hydrogen evolution region. It is shown that significant electrochemical oxidation responses occur at discrete potential values well below that for the formation of the compact monolayer oxide of bulk gold and are attributed to the facile oxidation of surface active sites. Several electrocatalytic reactions are explored in which the onset potential is determined by the presence of such sites on the surface. Significantly, the facile oxidation of active sites is used to drive the electroless deposition of metals such as platinum, palladium and silver from their aqueous salts on the surface of gold nanostructures. The resultant surface decoration of gold with secondary metal nanoparticles not only indicates regions on the surface which are rich in active sites but also provides a method to form interesting bimetallic surfaces.

Online or conventional democracy? The Ashgrove election and networked journalism

This study focuses on new media use in democratic discourse, specifically in the Queensland state electoral division of Ashgrove, 2011. This site was chosen to make an enquiry into the place of mass media in public decision- making, asking the question: did online media provide an extension of democracy, and what would be journalism’s role in democratic discourse? The study utilises a survey of 280 constituents, a review of pertinent news coverage, and extensive interviews with a panel of informants. In the outcome, it found those most equipped to utilise online media showed a lack of will to get involved in deeper political, social engagements. It also sees younger demographics forming news habits, not usually in step with traditional political avenues, based on familiarity with online processes, while consciously marginalising the need for trustworthiness in this set- ting. These issues are considered together with one leading proposal as to where the future of new media might be heading. It assesses the notion of professional and amateur collaboration by employing the model articulated by Beckett, called ‘networked journalism’.

A survey of the Queensland healthcare workforce : attitudes towards dementia care and training

Background Positive attitudes of healthcare staff towards people with dementia promote higher quality care, although little is known about important factors that underlie positive attitudes. Key aims of this project were to explore the relationships between staff attitudes towards dementia, self-confidence in caring for people with dementia, experience and dementia education and training. Method A brief online survey was developed and widely distributed to registered nurses and allied health professionals working in Queensland in 2012. Regression analyses were performed to identify important predictors of self-confidence in caring for people with dementia and positive attitudes towards people with dementia. Results Five hundred and twenty-four surveys were completed by respondents working in a range of care settings across Queensland. Respondents were predominantly female (94.1%), and most were registered nurses (60%), aged between 41 and 60 years (65.6%). Around 40% regularly worked with people with dementia and high levels of self-confidence in caring for this population and positive attitudes towards people with dementia were reported. The majority of respondents (67%) had participated in a dementia education/training activity in the past 12 months. More experience working with people with dementia predicted greater self-confidence while recent participation in a dementia education/training and higher self-confidence in caring for a person with dementia significantly predicted more positive attitudes towards people with dementia. Conclusion These results confirm the importance of self-confidence and dementia education in fostering positive attitudes and care practices towards people with dementia. Our results also indicate that the demand for ongoing dementia education is high amongst health care workers and it is recommended that regular dementia education/ training be provided and promoted for all healthcare personnel who work with people with dementia.

Cross-sectional survey of the health behaviour of southeast Queensland women with cancer-treatment induced menopause : Implications for cancer and primary care nurses

Purpose Women who experience cancer treatment-induced menopause are at risk of long-term chronic morbidity. This risk can be prevented or offset with adherence to health promotion and risk reduction guidelines. The purpose of this study was to explore health behaviours in younger female survivors of cancer and the variables (quality of life and psychological distress) believed to moderate health behaviours. Design Cross-sectional survey of a convenience sample of women (n = 85) in southeast Queensland. Methods Health behaviour and health status were elicited with items from the Australian Health Survey and the Behavioural Risk Factor Surveillance System. The WHO Quality of Life (Brief) measured participants’ self-reported quality of life and their satisfaction with their health. The Brief Symptom Inventory-18 measured psychological distress. Findings Higher self-reported health status was associated with regular exercise and better quality of life. However, a substantial proportion of participants did not engage in the physical activity, dietary or cervical screening practices recommended by Australian guidelines. Conclusions The participants require education regarding the benefits of diet, exercise, weight loss and decreased alcohol intake, as well as information on future health risks and possible comorbidities. These education sessions could be addressed by a nurse-led health promotion model of care at the time of discharge or in the community.

A process-oriented approach to supporting Off-site Manufacture in construction projects

It is well-known that the use of off-site manufacture (OSM) techniques can assist in timely completion of a construction project though the utilisation of such techniques may have other disadvantages. Currently, OSM uptake within the Australian construction industry is limited. To successfully incorporate OSM practices within a construction project, it is crucial to understand the impact of OSM adoption on the processes used during a construction project. This paper presents how a systematic process-oriented approach may be able to support OSM utilisation within a construction project. Process modelling, analysis and automation techniques which are well-known within the Business Process Management (BPM) discipline have been applied to develop a collection of construction process models that represent the end-to-end generic construction value chain. The construction value chain enables researchers to identify key activities, resources, data, and stakeholders involved in construction processes in each defined construction phase. The collection of construction process models is then used as a basis for identification of potential OSM intervention points in collaboration with domain experts from the Australian construction industry. This ensures that the resulting changes reflect the needs of various stakeholders within the construction industry and have relevance in practice. Based on the input from the domain experts, these process models are further refined and operational requirements are taken into account to develop a prototype process automation (workflow) system that can support and coordinate OSM-related process activities. The resulting workflow system also has the potential to integrate with other IT solutions used within the construction industry (e.g., BIM, Acconex). As such, the paper illustrates the role that process-oriented thinking can play in assisting OSM adoption within the industry.

An instrument to measure adherence to weight loss programs : the Compliance Praxis Survey-Diet (COMPASS-Diet)

Adherence to behavioral weight loss strategies is important for weight loss success. We aimed to examine the reliability and validity of a newly developed compliance praxis-diet (COMPASS-diet) survey with participants in a 10-week dietary intervention program. During the third of five sessions, participants of the “slim-without-diet” weight loss program (n = 253) completed the COMPASS-diet survey and provided data on demographic and clinical characteristics, and general self-efficacy. Group facilitators completed the COMPASS-diet-other scale estimating participants’ likely adherence from their perspective. We calculated internal consistency, convergent validity, and predictive value for objectively measured weight loss. Mean COMPASS-diet-self score was 82.4 (SD 14.2) and COMPASS-diet-other score 80.9 (SD 13.6) (possible range 12–108), with lowest scores in the normative behavior subscale. Cronbach alpha scores of the COMPASS-diet-self and -other scale were good (0.82 and 0.78, respectively). COMPASS-diet-self scores (r = 0.31) correlated more highly with general self-efficacy compared to COMPASS-diet-other scores (r = 0.04) providing evidence for validity. In multivariable analysis adjusted for age and gender, both the COMPASS-diet-self (F = 10.8, p < 0.001, r2 = 0.23) and other (F = 5.5, p < 0.001, r2 = 0.19) scales were significantly associated with weight loss achieved at program conclusion. COMPASS-diet surveys will allow group facilitators or trainers to identify patients who need additional support for optimal weight loss.

A point prevalence study of cancer nursing practices for managing intravascular devices in an Australian tertiary cancer center

Purpose The use of intravascular devices is associated with a number of potential complications. Despite a number of evidence-based clinical guidelines in this area, there continues to be nursing practice discrepancies. This study aims to examine nursing practice in a cancer care setting to identify nursing practice and areas for improvement respective to best available evidence. Methods A point prevalence survey was undertaken in a tertiary cancer care centre in Queensland, Australia. On a randomly selected day, four nurses assessed intravascular device related nursing practices and collected data using a standardized survey tool. Results 58 inpatients (100%) were assessed. Forty-eight (83%) had a device in situ, comprising 14 Peripheral Intravenous Catheters (29.2%), 14 Peripherally Inserted Central Catheters (29.2%), 14 Hickman catheters (29.2%) and six Port-a-Caths (12.4%). Suboptimal outcomes such as incidences of local site complications, incorrect/inadequate documentation, lack of flushing orders, and unclean/non intact dressings were observed. Conclusions This study has highlighted a number of intravascular device related nursing practice discrepancies compared with current hospital policy. Education and other implementation strategies can be applied to improve nursing practice. Following education strategies, it will be valuable to repeat this survey on a regular basis to provide feedback to nursing staff and implement strategies to improve practice. More research is required to provide evidence to clinical practice with regards to intravascular device related consumables, flushing technique and protocols.

Making prevention matter : a survey of child sexual abuse prevention programs in Australia

Throughout Australia, there is considerable concern about the prevalence of child sexual abuse. Sexual abuse is experienced by over 3,500 Australian children each year, causing long-term psychological, health and social problems to children, their families and communities, and significant economic costs to society as a whole. In many countries, the provision of school-based programs has been a core strategy in efforts to prevent child sexual abuse. However, little is known about the range of programs in use in Australia, the numbers of children who have received programs, and the contents and methods used in program delivery. This presentation reports on a detailed National survey of child sexual abuse prevention programs currently used in Australian primary schools. An online survey was conducted over a six-month period from November 2011 to April 2012 yielding detailed data from 38 programs. The presentation will provide an overview of: the scope and reach of programs; program content, teaching strategies and resources; barriers and facilitators to program adoption by schools; and program evaluation strategies.

Enabling aircraft emergency landings using active visual site detection

The ability to automate forced landings in an emergency such as engine failure is an essential ability to improve the safety of Unmanned Aerial Vehicles operating in General Aviation airspace. By using active vision to detect safe landing zones below the aircraft, the reliability and safety of such systems is vastly improved by gathering up-to-the-minute information about the ground environment. This paper presents the Site Detection System, a methodology utilising a downward facing camera to analyse the ground environment in both 2D and 3D, detect safe landing sites and characterise them according to size, shape, slope and nearby obstacles. A methodology is presented showing the fusion of landing site detection from 2D imagery with a coarse Digital Elevation Map and dense 3D reconstructions using INS-aided Structure-from-Motion to improve accuracy. Results are presented from an experimental flight showing the precision/recall of landing sites in comparison to a hand-classified ground truth, and improved performance with the integration of 3D analysis from visual Structure-from-Motion.

How does innovation happen in the upstream oil & gas industry? Insights from a global survey

Few would argue that the upstream oil & gas industry has become more technology-intensive over the years. But how does innovation happen in the industry? Specifically, what ideas and inputs flow from which parts of the sector’s value network, and where do these inputs go? And how do firms and organizations from different countries contribute differently to this process? This paper puts forward the results of a survey designed to shed light on these issues. A joint research initiative between the Society of Petroleum Engineers and the Queensland University of Technology, the survey was sent to 469 executives and senior managers who played a significant role with regards to R&D and/or technology deployment in their respective business units. A total of 199 responses were received from a broad range of organizations and countries around the world. Several interesting themes and trends emerge from the results, including: (1) service companies tend to file considerably more patents per innovation than other types of organization; (2) over 63% of the deployed innovations reported in the survey originated in service companies; (3) neither universities nor government-led research organizations are considered to be valuable sources of new information and knowledge in the industry’s R&D initiatives; and (4) despite the increasing degree of globalization in the marketplace, the USA still plays an extremely dominant role in the industry’s overall R&D and technology deployment activities. By providing a detailed snapshot of how innovation happens in the upstream oil & gas sector, this paper provides a valuable foundation for future investigations and discussions aimed at improving how R&D and technology deployment are managed within the industry.