Application for fault location in electrical power distribution systems

Fault location has been studied deeply for transmission lines due to its importance in power systems. Nowadays the problem of fault location on distribution systems is receiving special attention mainly because of the power quality regulations. In this context, this paper presents an application software developed in Matlabtrade that automatically calculates the location of a fault in a distribution power system, starting from voltages and currents measured at the line terminal and the model of the distribution power system data. The application is based on a N-ary tree structure, which is suitable to be used in this application due to the highly branched and the non- homogeneity nature of the distribution systems, and has been developed for single-phase, two-phase, two-phase-to-ground, and three-phase faults. The implemented application is tested by using fault data in a real electrical distribution power system

El costo de la atención ambulatoria del lupus eritematoso sistémico en Colombia. Contrastes y comparaciones con otras poblaciones.

Introducción: el lupus eritematoso sistémico (LES) es considerado una enfermedad de alto costo. La expresión clínica de la enfermedad depende de la ubicación geografía y la etnicidad. El objetivo de este estudio fue el calcular los costos ambulatorios relacionado al LES en una cohorte colombiana, identificar los predictores de costos y comparar nuestro resultados con otras poblaciones. Métodos: Se realizó una aproximación de tipo prevalencia en 100 pacientes LES en quienes se evaluaron los costos directos médicos, directos no médicos, indirectos e intangibles. Todos los costos médicos fueron evaluados usando una metodología abajo hacia arriba. Los costos directos fueron valorados desde una perspectiva social usando una metodología de micro-costeo. Los costos indirectos se evaluaron mediante una aproximación de capital humano, y los costos intangibles calculados a partir de los años de vida ajustados por calidad (AVAC). Se analizaron los datos por medio de un análisis multivariado. Para comparaciones con otras poblaciones todos los costos fueron expresados como la razón entre los costos y producto interno bruto nacional per cápita. Resultados: La media de costos totales fue 13.031±9.215 USD (ajustados por el factor de conversión de paridad del poder adquisitivo), lo cual representa el 1,66 del PIB per capita de Colombia. Los costos directos son el 64% de los costos totales. Los costos médicos representan el 80% de los costos directos,. Los costos indirectos fueron el 10% y los costos intangibles el 25% de los costos totales. Los medicamentos representaron el 45% de los costos directos. Mayores costos se relacionaron con el estrato socioeconómico, seguro médico privado, AVAC, alopecia, micofenolato mofetilo, y terapia anticoagulante. Los costos directos ajustados de los pacientes con LES en Colombia fueron mayores que en Norte América y en Europa. Conclusiones: el LES impone una carga económica importante para la sociedad. Los costos relacionados con la atención médica y AVAC fueron los principales contribuyentes al alto costo de la enfermedad. Estos resultados pueden ser referencia para determinar políticas en salud pública así como comparar el gasto en salud de forma internacional.

Britain becomes a great power.

Es un texto indicado para alumnos del nivel Key Stage dos, que ofrece una forma de comprender las fuerzas y acontecimientos que han intervenido para dar forma a la sociedad británica. Se pretende crear interés por la historia al presentarla con un desarrollo coherente y vivo. Para ello, se tratan también temas cómo la vida familiar, la agricultura, la guerra, la religión y la industria y su evolución a lo largo de los siglos.

The Gulf Cooperation Council as a New Regional Power: Time for the EU to Propose a Strategic Partnership. Bruges Regional Integration & Global Governance Papers 3/2012, November 2012

The Gulf Cooperation Council (GCC) is a de facto regional power in the Arab world. Its role has been crucial in some of the outcomes of the Arab Spring. The GCC countries have been very pragmatic in dealing with the uprisings, avoiding any revolutionary spill-over throughout the Gulf region. This paper examines to what extent the policies of the European Union (EU) in the Gulf have changed since the beginning of the Arab Spring. It argues that despite the calls by the European Parliament and by the High Representative Baroness Ashton to improve the relationship, the EU’s support for a new policy in the Gulf after the Arab Spring is stalling, and little new or concrete has been achieved. The paper concludes that the Union needs a reinforced partnership that merges the various EU policies in the region into a single strategic partnership with the Arab countries.

Rational conversion of substrate and product specificity in a Salvia monoterpene synthase: structural insights into the evolution of terpene synthase function

Terpene synthases are responsible for the biosynthesis of the complex chemical defense arsenal of plants and microorganisms. How do these enzymes, which all appear to share a common terpene synthase fold, specify the many different products made almost entirely from one of only three substrates? Elucidation of the structure of 1,8-cineole synthase from Salvia fruticosa (Sf-CinS1) combined with analysis of functional and phylogenetic relationships of enzymes within Salvia species identified active-site residues responsible for product specificity. Thus, Sf-CinS1 was successfully converted to a sabinene synthase with a minimum number of rationally predicted substitutions, while identification of the Asn side chain essential for water activation introduced 1,8-cineole and alpha-terpineol activity to Salvia pomifera sabinene synthase. A major contribution to product specificity in Sf-CinS1 appears to come from a local deformation within one of the helices forming the active site. This deformation is observed in all other mono- or sesquiterpene structures available, pointing to a conserved mechanism. Moreover, a single amino acid substitution enlarged the active-site cavity enough to accommodate the larger farnesyl pyrophosphate substrate and led to the efficient synthesis of sesquiterpenes, while alternate single substitutions of this critical amino acid yielded five additional terpene synthases.

The isolation of a single spore isolate of Pasteuria penetrans and its pathogenicity on Meloidogyne javanica

We have obtained a single spore isolate of Pasteuria penetrans, derived by allowing a single spore to attach to a second-stage juvenile (J2) of the root-knot nematode Meloidogyne javanica. By analysing DNA sequences at three different loci we have obtained evidence that the isolate is, indeed, genetically pure. We compared the ability of the single spore isolate and the parent population from which it was selected to attach to and parasitise both the original population of M. javanica on which it was isolated and a single egg mass line derived from it. There was no difference in the attachment of spores of the single spore isolate to juveniles compared to the parental population, although there were higher numbers of both attaching to J2 of the single egg mass line compared to its parental population. Judging from the numbers of egg masses and Pasteuria-infected females, the single spore isolate was less pathogenic to the parental population of M. javanica than was the parental spore population.

Sequential designs for phase III clinical trials incorporating treatment selection

Most statistical methodology for phase III clinical trials focuses on the comparison of a single experimental treatment with a control. An increasing desire to reduce the time before regulatory approval of a new drug is sought has led to development of two-stage or sequential designs for trials that combine the definitive analysis associated with phase III with the treatment selection element of a phase II study. In this paper we consider a trial in which the most promising of a number of experimental treatments is selected at the first interim analysis. This considerably reduces the computational load associated with the construction of stopping boundaries compared to the approach proposed by Follman, Proschan and Geller (Biometrics 1994; 50: 325-336). The computational requirement does not exceed that for the sequential comparison of a single experimental treatment with a control. Existing methods are extended in two ways. First, the use of the efficient score as a test statistic makes the analysis of binary, normal or failure-time data, as well as adjustment for covariates or stratification straightforward. Second, the question of trial power is also considered, enabling the determination of sample size required to give specified power. Copyright © 2003 John Wiley & Sons, Ltd.

A simple two-stage design for quantitative responses with application to a study in diabetic neuropathic pain

Two-stage designs offer substantial advantages for early phase II studies. The interim analysis following the first stage allows the study to he stopped for futility, or more positively, it might lead to early progression to the trials needed for late phase H and phase III. If the study is to continue to its second stage, then there is an opportunity for a revision of the total sample size. Two-stage designs have been implemented widely in oncology studies in which there is a single treatment arm and patient responses are binary. In this paper the case of two-arm comparative studies in which responses are quantitative is considered. This setting is common in therapeutic areas other than oncology. It will be assumed that observations are normally distributed, but that there is some doubt concerning their standard deviation, motivating the need for sample size review. The work reported has been motivated by a study in diabetic neuropathic pain, and the development of the design for that trial is described in detail. Copyright (C) 2008 John Wiley & Sons, Ltd.

Life cycle analysis of UK coal fired power plants

This paper examines the life cycle GHG emissions from existing UK pulverized coal power plants. The life cycle of the electricity Generation plant includes construction, operation and decommissioning. The operation phase is extended to upstream and downstream processes. Upstream processes include the mining and transport of coal including methane leakage and the production and transport of limestone and ammonia, which are necessary for flue gas clean up. Downstream processes, on the other hand, include waste disposal and the recovery of land used for surface mining. The methodology used is material based process analysis that allows calculation of the total emissions for each process involved. A simple model for predicting the energy and material requirements of the power plant is developed. Preliminary calculations reveal that for a typical UK coal fired plant, the life cycle emissions amount to 990 g CO2-e/kWh of electricity generated, which compares well with previous UK studies. The majority of these emissions result from direct fuel combustion (882 g/kWh 89%) with methane leakage from mining operations accounting for 60% of indirect emissions. In total, mining operations (including methane leakage) account for 67.4% of indirect emissions, while limestone and other material production and transport account for 31.5%. The methodology developed is also applied to a typical IGCC power plant. It is found that IGCC life cycle emissions are 15% less than those from PC power plants. Furthermore, upon investigating the influence of power plant parameters on life cycle emissions, it is determined that, while the effect of changing the load factor is negligible, increasing efficiency from 35% to 38% can reduce emissions by 7.6%. The current study is funded by the UK National Environment Research Council (NERC) and is undertaken as part of the UK Carbon Capture and Storage Consortium (UKCCSC). Future work will investigate the life cycle emissions from other power generation technologies with and without carbon capture and storage. The current paper reveals that it might be possible that, when CCS is employed. the emissions during generation decrease to a level where the emissions from upstream processes (i.e. coal production and transport) become dominant, and so, the life cycle efficiency of the CCS system can be significantly reduced. The location of coal, coal composition and mining method are important in determining the overall impacts. In addition to studying the net emissions from CCS systems, future work will also investigate the feasibility and technoeconomics of these systems as a means of carbon abatement.

Polydextrose, lactitol, and fructo-oligosaccharide fermentation by colonic bacteria in a three-stage continuous culture system

In vitro fermentations were carried out by using a model of the human colon to simulate microbial activities of lower gut bacteria. Bacterial populations (and their metabolic products) were evaluated under the effects of various fermentable substrates. Carbohydrates tested were polydextrose, lactitol, and fructo-oligosaccharide (FOS). Bacterial groups of interest were evaluated by fluorescence in situ hybridization as well as by species-specific PCR to determine bifidobacterial species and percent-G+C profiling of the bacterial communities present. Short-chain fatty acids (SCFA) produced during the fermentations were also evaluated. Polydextrose had a stimulatory effect upon colonic bifidobacteria at concentrations of 1 and 2% (using a single and pooled human fecal inoculum, respectively). The bifidogenic effect was sustained throughout all three vessels of the in vitro system (P = 0.01 seen in vessel 3), as corroborated by the bacterial community profile revealed by %G+C analysis. This substrate supported a wide variety of bifidobacteria and was the only substrate where Bifidobacterium infantis was detected. The fermentation of lactitol had a deleterious effect on both bifidobacterial and bacteroides populations (P = 0.01) and decreased total cell numbers. SCFA production was stimulated, however, particularly butyrate (beneficial for host colonocytes). FOS also had a stimulatory effect upon bifidobacterial and lactobacilli populations that used a single inoculum (P = 0.01 for all vessels) as well as a bifidogenic effect in vessels 2 and 3 (P = 0.01) when a pooled inoculum was used. A decrease in bifidobacteria throughout the model was reflected in the percent-G+C profiles.

A clocking technique with power savings in virtex-based pipelined designs

This paper presents the evaluation in power consumption of a clocking technique for pipelined designs. The technique shows a dynamic power consumption saving of around 30% over a conventional global clocking mechanism. The results were obtained from a series of experiments of a systolic circuit implemented in Virtex-II devices. The conversion from a global-clocked pipelined design to the proposed technique is straightforward, preserving the original datapath design. The savings can be used immediately either as a power reduction benefit or to increase the frequency of operation of a design for the same power consumption.

Monetary integration and real estate markets: an investigation of the impact of the introduction of a single currency on real estate performance

This paper assesses the impact of the monetary integration on different types of stock returns in Europe. In order to isolate European factors, the impact of global equity integration and small cap factors are investigated. European countries are sub-divided according to the process of monetary convergence. Analysis shows that national equity indices are strongly influenced by global market movements, with a European stock factor providing additional explanatory power. The global and European factors explain small cap and real estate stocks much less well –suggesting an increased importance of ‘local’ drivers. For real estate, there are notable differences between core and non-core countries. Core European countries exhibit convergence – a convergence to a European rather than a global factor. The non-core countries do not seem to exhibit common trends or movements. For the non-core countries, monetary integration has been associated with increased dispersion of returns, lower correlation and lower explanatory power of a European factor. It is concluded that this may be explained by divergence in underlying macro-economic drivers between core and non-core countries in the post-Euro period.

A general basis for quarter-power scaling in animals

It has been known for decades that the metabolic rate of animals scales with body mass with an exponent that is almost always <1, >2/3, and often very close to 3/4. The 3/4 exponent emerges naturally from two models of resource distribution networks, radial explosion and hierarchically branched, which incorporate a minimum of specific details. Both models show that the exponent is 2/3 if velocity of flow remains constant, but can attain a maximum value of 3/4 if velocity scales with its maximum exponent, 1/12. Quarterpower scaling can arise even when there is no underlying fractality. The canonical “fourth dimension” in biological scaling relations can result from matching the velocity of flow through the network to the linear dimension of the terminal “service volume” where resources are consumed. These models have broad applicability for the optimal design of biological and engineered systems where energy, materials, or information are distributed from a single source.