Application of impedance spectroscopy to evaluate the effect of different setting accelerators on the developed microstructures of calcium phosphate cements

The main goal of the present study was to evaluate the effect of different setting accelerator agents on the developed microstructures of calcium phosphate cements (CPCs) by employing the impedance spectroscopy (IS) technique. Six compositions of CPCs were prepared from mixtures of commercial dicalcium phosphate anhydrous (DCPA) and synthesized tetracalcium phosphate (TTCP) as the solid phases. Two TTCP/DCPA molar ratios (1/1 and 1/2) and three liquid phases (aqueous solutions of Na(2)HPO(4), tartaric acid (TA) and oxalic acid (OA), 5% volume fraction) were employed. Initial (I) and final (F) setting times of the cement pastes were determined with Gillmore needles (ASTM standard C266-99). The hardened samples were characterized by X-ray powder diffraction (XRD), Fourier transformed infrared (FTIR) spectroscopy, scanning electron microscopy (SEM), and apparent density measurements. The IS technique was employed as a non-destructive tool to obtain information related to porosity, tortuosity and homogeneity of the cement microstructures. The formulation prepared from a TTCP/DCPA equimolar mixture and OA as the liquid phase presented the shortest I and F (12 and 20 min, respectively) in comparison to the other studied systems. XRD analyses revealed the formation of low-crystallinity hydroxyapatite (HA) (as the main phase) as well as the presence of little amounts of unreacted DCPA and TTCP after 24 h hardening in 100% relative humidity. This was related to the proposed mechanisms of dissolution of the reactants. The bands observed by FTIR allowed identifying the presence of calcium tartrate and calcium oxalate in the samples prepared from TA and OA, in addition to the characteristic bands of HA. High degree of entanglement of the formed crystals was observed by SEM in samples containing OA. SEM images were also correlated to the apparent densities of the hardened cements. Changes in porosity, tortuosity and microstructural homogeneity were determined in all samples, from IS results, when the TTCP/DCPA ratio was changed from 1/1 to 1/2. The cement formulated from an equimolar mixture of TTCP/DCPA and OA as the liquid phase presented setting times, degree of conversion to low-crystallinity HA and microstructural features suitable to be used as potential bone cement in clinical applications. The IS technique was shown to be a very sensitive and non-destructive tool to relate the paste composition to the developed microstructures. This approach could be very useful to develop calcium phosphate bone cements for specific clinical demands.

Tectonic setting and U/Pb zircon dating of the plutonic Socorro Complex in the Transpressive Rio Paraíba do Sul Shear Belt, SE Brazil

The Precambrian Rio Paraíba do Sul Shear Belt comprises a 200-km-wide anastomosing network of NE-SW trending ductile shear zones extending over 1000 km of the southeastern coast of Brazil. Granulitic, gneissic-migmatitic, and granitoid terrains as well as low- to medium-grade metavolcanosedimentary sequences are included within it. These rocks were affected by strong contractional, tangential tectonics, due to west-northwestward oblique convergence of continental blocks. Subsequent transpressional tectonics accomodated large dextral, orogen-parallel movements and shortening. The plutonic Socorro Complex is one of many deformed granites with a foliation subparallel to that of the shear belt and exposes crosscutting relationships between its tectonic, magmatic, and metamorphic structures. These relationships point to a continuous magmatic evolution related to regional thrusts and strike slip, ductile shear zones. The tectonic and magmatic structural features of the Serra do Lopo Granite provide a model of emplacement by sheeting along shear zones during coeval strike-slip and cross shortening of country rocks. Geochronological data indicate that the main igneous activity of Socorro Complex spanned at least 55 million years, from the late stage of the northwestward ductile thrusting (650 Ma), through right-lateral strike slip (595 Ma) deformation. The country rocks yield discordant age data, which reflect a strong imprint of the Transamazonian tectono-metamorphic event (1.9 to 2.0 Ma). We propose a model for the origin of calcalkaline granites of the Ribeira Belt by partial melting of the lower crust with small contributions of the lithospheric mantle during transpressional thickening of plate margins, which were bounded by deep shear zones. The transpressional regime also seems to have focused granite migration from deeper into higher crustal levels along these shear zones.

Genetic control of fruit-setting percentage of tomatoes tolerant to high temperatures

The aim of present work was to study, through means and variances of generations, the genetic control of fruit-set percentage in tomatoes, in a biparental cross between line Jab-95 (resistant to fruit-set) and 'Caribe' cultivar (susceptible to fruit-set) after being subjected to high temperatures. F1, F2, and backcross generations for both parents (P 1, P2) were produced in a greenhouse at FCAVUNESP, Jaboticabal-SP, Brazil. A randomized complete block experimental design with four replications was used to evaluate the different generations. Estimates of genetic parameters were obtained according to Mather and Jinks (1982). An additive-dominant model was fitted to explain the variation observed. The mean degree of dominance (0.54), indicated incomplete dominance in the direction of increasing fruit-set percentage at high temperatures. The genetic control of fruit-set percentage, at high temperatures, for tomato was found to be oligogenic or polygenic (3.54 genes). The heritability in a limited sense was 83.91%, suggesting that the selection of individuals based on the characteristic evaluated can be efficient.

Setting the preheating process of electronic ballasts for hot-cathode fluorescent lamps, considering the Rh/Rc ratio

This paper presents a new model for the representation of the electrodes filaments of fluorescent lamps, during their preheating, and an analysis capable to guide the design of the preheating process in electronic ballasts. The main improvement obtained with the lamp model is the accurate theoretical reproduction of the behavior of the Rh/Rc ratio during the preheating process. In addition, using the proposed methodology based on the lamp model, it is possible to set a proper preheating process to the electrodes filaments, without the necessity of exhaustive empirical adjustments in the prototype, reducing time and costs involved in the design of ballasts with preheating capabilities. © 2006 IEEE.

Composition of stingless bee honey: Setting quality standards

Compositional data from 152 stingless bee (Meliponini) honey samples were compiled from studies since 1964, and evaluated to propose a quality standard for this product. Since stingless bee honey has a different composition than Apis mellifera honey, some physicochemical parameters are presented according to stingless bee species. The entomological origin of the honey was known for 17 species of Meliponini from Brazil, one from Costa Rica, six from Mexico, 27 from Panama, one from Surinam, two from Trinidad & Tobago, and seven from Venezuela, most from the genus Melipona. The results varied as follows: moisture (19.9-41.9g/100g), pH (3.15-4.66), free acidity (5.9-109.0meq/Kg), ash (0.01-1.18g/100g), diastase activity (0.9-23.0DN), electrical conductivity (0.49-8.77mS/cm), HMF (0.4-78.4mg/Kg), invertase activity (19.8-90.1IU), nitrogen (14.34-144.00mg/100g), reducing sugars (58.0-75.7g/100g) and sucrose (1.1-4.8g/100g). Moisture content of stingless bee honey is generally higher than the 20% maximum established for A. mellifera honey. Guidelines for further contributions would help make the physicochemical database of meliponine honey more objective, in order to use such data to set quality standards. Pollen analysis should be directed towards the recognition of unifloral honeys produced by stingless bees, in order to obtain standard products from botanical species. A honey quality control campaign directed to both stingless beekeepers and stingless bee honey hunters is needed, as is harmonization of analytical methods. © 2007 Asociación Interciencia.

Cytotoxic effects of hard-setting cements applied on the odontoblast cell line MDPC-23

Objective: The present study evaluated the cytotoxic effects of hard setting applied on the odontoblastlike cells MDPC-23. Study design: Eighty round-shaped samples were prepared with the following experimental materials: calcium hydroxide, Vitrebond, RelyX Luting, and RelyX Unicem. The samples were placed in serum-free culture medium and incubated for 24 hours or 7 days at 37°C with 5% CO 2 and 95% air. The odontoblast cells were plated in the wells and incubated for 72 hours. After this period, the complete culture medium was replaced by the extracts obtained from every sample, and the methyltetrazolium assay was carried out to evaluate the cell metabolism. Results: For the 24-hour period, the experimental materials calcium hydroxide, Vitrebond, RelyX Luting, and RelyX Unicem decreased the cell metabolic activity by 91.52%, 81.14%, 78.17%, and 2.64%, respectively. For the 7-day period, calcium hydroxide, Vitrebond, RelyX Luting, and RelyX Unicem decreased the metabolic activity of the MDPC-23 cells by 91.13%, 87.27%, 79.04%, and 10.51%, respectively. Conclusion: RelyX Unicem presented the lowest cytopathic effects to the cultured odontoblast cell line. © 2007 Mosby, Inc. All rights reserved.

Usefulness of Mycobacterium tuberculosis molecular typing in a tuberculosis low-endemic agro-industrial setting of Brazil

To highlight the transmission and major phylogenetic clades of Mycobacterium tuberculosis, a retrospective study was carried out at two health facilities in a small agro-industrial area in São Paulo, Brazil, that has a low tuberculosis incidence rate. IS6110-RFLP and spoligotyping were performed on the isolates, with the former revealing that 31.3% (35/112) of strains were clustered. Epidemiological links were found in 16 of the 35 clustered patients and were associated with transmission among patients living in public housing. Spoligotyping grouped 62.8% of the strains. The T genetic family predominated among the isolates. Of interest is that five strains had a pattern characteristic of African or Asian origin (ST535), and two others were of the rare localized type ST1888 (BRA, VEN). In addition, three new types-1889, 1890, and 1891-were identified. Spoligotyping showed that some ST may be circulating to or from Brazil, and RFLP revealed ongoing transmission in inadequately ventilated public-housing buildings. This may point to a failure in tuberculosis control policy.

A summary of the ECLAC proposals

Includes bibliography

ECLAC in its historical setting

Includes bibliography

Setting Time Affects In Vitro Biological Properties of Root Canal Sealers

Introduction: Biocompatibility of root canal sealers is important because of the long-term contact of their eluates and/or degradation products with periapical tissues. The literature still lacks studies about the genotoxic effects of these materials and the influence of setting time on biological properties. The cytotoxicity and genotoxicity of an epoxy resin-based sealer (AH Plus), a single methacrylate-based sealer (EndoRez), and a silicone-based sealer (RoekoSeal) were assessed. Methods: Chinese hamster fibroblasts (V79) were cultured and exposed to different dilutions of extracts from the sealers that were left to set for 0, 12, and 24 hours before contact with culture medium. Cell viability was measured by the methyl-thiazol-diphenyltetrazolium assay. Genotoxicity was assessed by the comet assay. Data were statistically analyzed by Kruskal-Wallis and Dunn tests (P < .05). Results: Root canal sealers were statistically more cytotoxic than the untreated control group, except for the silicon-based sealer. Cell viability ranking was the following (from the most to the least cytotoxic): methacrylate-based > epoxy resin-based > silicone-based. The setting time influenced the epoxy resin-based sealer cytotoxicity (decreased at 12 hours) and the general genotoxicity (increased at 24 hours). DNA damage ranking was the following (from the most to the least genotoxic): methacrylate-based > silicone-based = epoxy resin-based. Conclusions: The setting time had influence on the cytotoxicity of the epoxy resin-based sealer and genotoxicity of all tested sealers. The methacrylate-based sealer was the most cytotoxic, and the silicone-based sealer was not cytotoxic. Genotoxicity was observed for all sealers. © 2013 American Association of Endodontists.

Application of the concepts of agro-tourism, agricultural diversification and food and nutrition for the development of Caribbean communities with reference to standards and priority setting

Introduction There is a renewed call for a new approach to development with emphasis on community empowerment or participation, with the belief that more sustainable activities will be undertaken in those communities. Much of that call, however, is coming not from within the communities, but primarily from advocates of change who may have little to do with those communities. What then will the new approach bring apart from a change in who are the decision-makers? And how do we ensure that the change that is called for will, in fact, bring added benefits to the communities themselves? To be sure, there are some successful stories of a community approach to problem solving. However, there are also many more stories of project failures. Serious analytical work, therefore, needs to be done to determine the factors that promote a successful community-based approach; when this approach should be used; and the methodology that should be employed. In an attempt to determine these factors, a brief analysis will be made of some of the governing structures in the subregion and their possible impact on the proposed new approach. Some of the earlier efforts at stakeholder and community approach to projects will also be examined as well as the new development strategy that is prompting the call for this new paradigm. The new paradigm focuses to a large extent on decision-making and community empowerment. With few exceptions, it is short on the promotion of tangible activities that are based on the resource inventory of the communities. This is not surprising, since, as noted before, the advocates of community empowerment may have very little connection with the communities and, in most cases, are unfamiliar with the resource base. Hence, a theoretical case is made, suggesting more style than substance. Another obvious shortcoming of this new paradigm is its continued over- dependence on assistance from the outside to build communities. Externally funded projects, seminars and meetings outside of the communities and foreign technical assistance continue to dominate these projects. While, of course, all communities have basic common needs such as water, health, education and electricity, there is sufficient diversity within communities to allow for tailoring of activities and programmes such that their differences become assets. It is in that context, that agro-tourism activities, standards, agricultural diversification, food and nutrition and priority setting have been chosen as aspects and activities for promoting community development, drawing on the various strengths of communities, rural or urban.

Análise dos efeitos de um treino parental sobre comportamentos de crianças com TDAH: comparação entre setting terapêutico e ambiente domiciliar

Esse estudo foi realizado com o objetivo de contribuir com a avaliação dos efeitos de uma intervenção comportamental direcionada a pais/responsáveis de crianças com Transtorno do Déficit de Atenção e Hiperatividade-TDAH, investigando os efeitos desse modelo de treino parental em duas condições, setting terapêutico (Condição 1) e ambiente domiciliar (Condição 2), sobre a ocorrência de comportamentos de hiperatividade versus autocontrole. Os participantes foram pais de quatro crianças, na faixa etária entre cinco e nove anos. Utilizaram-se como instrumentos: Termo de Consentimento Livre e Esclarecido-TCLE, Inventário de Estilos Parentais-IEP, Lista de Verificação Comportamental para Crianças e Adolescentes-CBCL/TRF, Escala do TDAH versão para professor, Roteiro de Entrevista Inicial, Roteiro de Entrevista de Avaliação, Roteiro de Entrevista Final, Critério de Classificação Econômica Brasil-CCEB. O procedimento de pesquisa consistiu em: (a) contato com neuropediatra; (b) triagem e convite aos participantes; (c) distribuição de dois participantes para cada condição de intervenção; (d) avaliação inicial, incluindo entrevista com os responsáveis, aplicações do TCLE, IEP e CBCL; (e) visita à escola e aplicações do TCLE, da Escala do TDAH e do TRF, versões para professor; (f) realização de cinco sessões de intervenção, gravadas em áudio e vídeo, duas de linha de base, uma de habituação às regras e duas de manutenção das regras e instalação de comportamento de auto-observação, que envolveram situações de interação em jogos de regras, com participação da terapeuta-pesquisadora, da mãe e da criança; (g) realização de entrevista de avaliação da primeira fase; (h) reversão de contextos para os participantes e (i) avaliação final, realizada por meio de entrevista com os responsáveis e re-aplicação dos instrumentais padronizados com pais e professores, utilizados anteriormente, mais o CCEB. Os dados obtidos por meio dos instrumentos padronizados receberam o tratamento indicado nos manuais. Dois sistemas de categorias de análise do comportamento foram utilizados, um para descrever os comportamentos das mães e outro para comportamentos observados nas crianças. Os principais resultados sugerem que as crianças em ambiente de consultório tiveram maior ocorrência de emissão de comportamentos de autocontrole do que as em ambiente de domicílio, as quais, por sua vez, tiveram prevalência de comportamentos de hiperatividade/impulsividade. Do mesmo modo, as mães em ambiente de consultório obtiveram maiores escores em práticas educativas positivas e menos em negativas, comparadas às mães do grupo de domicílio. Houve aumento de práticas educativas positivas para a maioria das mães. Discute-se o contexto de consultório enquanto um ambiente eficaz de intervenção, embora se reconheça que as dificuldades de controle de comportamentos inadequados são maiores para os pais em ambiente domiciliar, por isso, intervenções em ambiente natural devem ser consideradas no processo terapêutico. Por outro lado, o treino parental demonstrou ser efetivo na aquisição, fortalecimento e manutenção de práticas educativas positivas em todas as mães, o que pode influenciar beneficamente os comportamentos das crianças com TDAH.