Phylogeographic analysis of mtDNA variation in four ethnic populations from Yunnan Province: new data and a reappraisal

Two sets of mitochondrial DNA (mtDNA) hypervariable segment I (HVS-I) data from four ethnic populations (Tibetan, Va, Dai, and Lahu) from Yunnan Province, China, were analyzed here by using phylogeographic methods. The results suggest that more attention

Packaging and storage studies of dried lizard fish

Packaging and storage studies of salted and dried lizard fish (Saurida sp.) have been conducted using different synthetic films like low density polyethylene (LDPE) of different gauges, high density polyethylene (HDPE) of 200 gauge, polyvinylidene chloride (PVDC) coated 400 MXXT cellophane, 100 gauge polypropylene (PP) and paper laminate of 100 gauge polythene. The films found most effective in the preliminary studies were subsequently used for packaging and storage of dried fish at atmospheric and lower temperature and humidity conditions for confirming their suitability under these conditions. Polyethylene films of higher gauges showed better results under both sets of conditions. PVDC coated cellophane film also performed satisfactorily under the latter conditions which under the former condition got easily attacked by insects. Lower temperature and humidity conditions in general enhanced the storage life of the dried product.

On the problem of nonadditivity in two-way analysis of variance of data for comparing the efficiency of fishing gears

To bring out the relative efficiency of various types of fishing gears, in the analysis of catch data, a combination of Tukey's test, consequent transformation and graphical analysis for outlier elimination has been introduced, which can be advantageously used for applying ANOVA techniques, Application of these procedures to actual sets of data showed that nonadditivity in the data was caused by either the presence of outliers, or the absence of a suitable transformation or both. As a corollary, the concurrent model: X sub(ij) = µ + α sub(i) + β sub(j) + λ α sub(i) β sub(j) + E sub(ij) adequately fits the data.

Impedance control and internal model use during the initial stage of adaptation to novel dynamics in humans.

This study investigated the neuromuscular mechanisms underlying the initial stage of adaptation to novel dynamics. A destabilizing velocity-dependent force field (VF) was introduced for sets of three consecutive trials. Between sets a random number of 4-8 null field trials were interposed, where the VF was inactivated. This prevented subjects from learning the novel dynamics, making it possible to repeatedly recreate the initial adaptive response. We were able to investigate detailed changes in neural control between the first, second and third VF trials. We identified two feedforward control mechanisms, which were initiated on the second VF trial and resulted in a 50% reduction in the hand path error. Responses to disturbances encountered on the first VF trial were feedback in nature, i.e. reflexes and voluntary correction of errors. However, on the second VF trial, muscle activation patterns were modified in anticipation of the effects of the force field. Feedforward cocontraction of all muscles was used to increase the viscoelastic impedance of the arm. While stiffening the arm, subjects also exerted a lateral force to counteract the perturbing effect of the force field. These anticipatory actions indicate that the central nervous system responds rapidly to counteract hitherto unfamiliar disturbances by a combination of increased viscoelastic impedance and formation of a crude internal dynamics model.

Morphine and propranolol co-administration impair consolidation of Y-maze spatial recognition memory

In the present study, the interaction between morphine and the beta-adrenergic receptor antagonist, propranolol (PROP), in memory consolidation was investigated in a two-trial recognition Y-maze task. Four sets of Y-maze experiments were carried out in mi

Seasonal variations in the activity budget of Nomascus concolor jingdongensis at Mt. Wuliang, Central Yunnan, China: Effects of diet and temperature

We studied seasonal variation in the activity budget of a habituated group of Nomascus concolor jingdongensis at Mt. Wuliang, Central Yunnan, China from March 2005 to April 2006 via scan sampling at 5-min intervals. The study site is near the northern extreme of the distribution of hylobatids, at high altitude with extreme seasonality of temperature and rainfall. During the day, feeding manifested a bimodal pattern of high activity levels in mid-morning and mid-afternoon, whereas resting reached a peak at midday, with proportionally less time used for traveling. Annually, the group spent an average of 40.0% of the time resting, 35.1% feeding, 19.9% traveling, 2.6% singing, 1.2% playing, and 1.3% in other activities. The proportion of time allocated to activities showed significant monthly variations and was influenced by the diet and temperature. Gibbons increased traveling and playing time and decreased feeding time when they ate more fruit, and they decreased traveling, singing, and playing time and increased feeding time when they ate more leaves. Moreover, when the temperature was low, the gibbons decreased time traveling and increased time resting. In summary, black-crested gibbons employed high-effort activities when they ate more fruit and energy-conservation patterns when they ate more leaves and in low temperature. Behavioral data from the site are particularly useful in understanding gibbon behavioral adaptations to different sets of ecological conditions.

A possible mode of the specific recognition of nucleic acids by proteins

Seven sets of protein target sites, which occur in several gene promoters, have been analyzed. The results suggest that there is a possible mode of specific recognition of double-helical nucleic acids by proteins, This recognition mode is related to a spe

Analysis of the energies of the triple base triplets

Sixty-four sets of three-dimensional models of DNA triplex base triplets (TBT) were built up based on codons by homologous modeling method and their energies were minimized. According to sequence of TBT and orientation of the third ODN strand third, the energies of monomers and water-K+-TBT ternary complexes of TBT were analyzed. The results showed: (i) The energies of the symmetric parallel monomers are generally lower than those of the symmetric anti-parallel monomers of TBT, but the energies of the symmetric parallel ternary complexes are higher than those of the symmetric anti-parallel ternary complexes of TBT. (ii) No matter TBTs are monomers or ternary complexes, the energies of asymmetric parallel TBTs are generally lower than those of the asymmetric anti-parallel ones. (iii) Although the energies of the parallel TBTs are correlated with those of the anti-parallel ones, the energy differences are significant between them. The results here suggest the sequences of TBTs and the orientations of the third ODN strands are two of the key factors that can influence the formation and stability of TBT. (C) 2002 Elsevier Science B.V. All rights reserved.

The comparative analysis of the energies of conjugated triple base triplets and their applications

We built 64 sets of 3D models of DNA triplex base triplets (TBT) and minimized their energies. The TBTs were divided into 32 pairs of conjugated ones on the basis of their sequence characteristic, and the energies of each pair of them were compared and analyzed, the results showed: (i) The duplex DNA of which any strand contains at least a couple of A or T, has a preference for selecting the oligodeoxyribonucleic acid (ODN) strand containing abundant T to form TBT. (ii) The duplex DNA of which any strand contains at least a couple of G or C has a preference for selecting ODN containing abundant G to form symmetric antiparallel TBT, but selecting ODN containing abundant C to form asymmetric parallel TBT. (iii) The duplex DNA of which any strand contains only one of A, T, G or C has a preference for selecting ODN containing abundant pyrimidines (T or C) to form antiparallel TBT. Additionally, two examples of TBTs applications, in designing ODN to form triplex with duplex were presented. The energy calculation result revealed that 15-TCG is the best ligand of the HIV PPT duplex. The comparative analysis of energies of the conjugated TBTs provides directive significance for designing ODN strand that is easy to form triplex in theory. (C) 2002 Elsevier Science B.V. All rights reserved.

Transcription rates of yeast genes are influenced by the distribution of introns

A comparative analysis on the intron sequence oligonucleotide usages in two sets of yeast genes with higher and lower transcription frequencies, respectively, has shown that the intron sequence structures of the two sets of genes are different. There are more potential binding sites for transcription factors in the introns of the genes with high transcription frequencies. So it is speculated that introns regulate the transcription of genes. But more evidences are needed to favor this speculation. The detailed comparative analyses on the distribution ( length and position) of introns and exons in the two sets of gene sequences also show that there is an obvious boundary between the lengths of the two sets of introns. There is no boundary between the lengths of the two sets of exons, although the means of their lengths are of discrepancy. The situation of the gene lengths ( length of intron and exon) is similar to exon lengths. As far as the relative position, the introns in two sets of genes all have a bias toward the 5' ends of genes. But as the actual position is considered, more introns in high transcription genes have a tendency to be located toward the 5' ends of genes, some even located at 5'-UTR. These results suggest that the gene transcription rates are related to the length of intron, but not to the lengths of exons and genes sequences. The positions of introns may also influence the transcription rates. The transcriptional regulation of introns may be correlative with the transcriptional regulation of the upstream of genes, or be its continuous action.

Statistical analysis of sequence features of introns with positive transcriptional regulation in yeast genes

A great deal of experimental studies have shown that many introns of eukaryotic genes function as regulators of transcription. However, comprehensive studies of this problem have not yet been conducted. After checking the transcription frequencies of some Saccharomyces cerevisiae (yeast), genes and their introns, a remarkable phenomenon was discovered that generally the introns of the genes with higher transcription frequencies are longer, and the introns of the genes with lower transcription frequencies are shorter. This suggests that the longer introns of genes with higher transcription frequencies may contain some characteristic sequence structures, which could enhance the transcription of genes. Therefore, two sets of introns of yeast genes were chosen for further study. The transcription frequencies of the first set of genes are higher (>30), and those of the second set of genes are lower (less than or equal to10). Some oligonucleotides are detected by statistically comparative analyses of the occurrence frequencies of oligonucleotides (mainly tetranucleotides and pentanucleotides), whose occurrence frequencies in the first set of introns; are significantly higher than those in the second set of introns, and are also significantly higher than those in the exons flanking the introns of the first set. Some of these extracted oligonucleotides are the same as the regulatory elements of transcription revealed by experimental analyses. Besides, the distributions of these extracted oligonucleotides in the two sets of introns and the exons show that the sequence structures of the first set of introns are favorable for transcription of genes.

Detection of potential positive regulatory motifs of transcription in yeast introns by comparative analysis of oligonucleotide frequencies

We conducted a comparative statistical analysis of tetra- through hexanucleotide frequencies in two sets of introns of yeast genes. The first set consisted of introns of genes that have transcription rates higher than 30 mRNAs/h while the second set contained introns of genes whose transcription rates were lower than or equal to 10 mRNAs/h. Some oligonucleotides whose occurrence frequencies in the first set of introns are significantly higher than those in the second set of introns were detected. The frequencies of occurrence of most of these detected oligonucleotides are also significantly higher than those in the exons flanking the introns of the first set. Interestingly some of these detected oligonucleotides are the same as well known "signature" sequences of transcriptional regulatory elements. This could imply the existence of potential positive regulatory motifs of transcription in yeast introns. (C) 2003 Elsevier Ltd. All rights reserved.

Inventors and entrepreneurs in academia: What types of skills and experience matter?

This paper aims to improve our understanding of the attributes of academic researchers that influence the capacity to contribute to technical advance, by adding to the pool of technological opportunities available to industry or engaging in the exploitation of entrepreneurial opportunities. We investigate a number of factors associated with the skills developed by academic researchers. We find that contributions to the pool of technological opportunities and exploitation of entrepreneurial opportunities involve different sets of skills and expertise of scientists. Our results show that the former is driven by academic scientists research excellence and discovery of earlier technological opportunities and the latter is driven by previous collaboration with industry partners, scientific breadth and experience of technological discovery. © 2011 Elsevier Ltd. All rights reserved.

Influence of film cooling hole angles and geometries on aerodynamic loss and net heat flux reduction

Turbine design engineers have to ensure that film cooling can provide sufficient protection to turbine blades from the hot mainstream gas, while keeping the losses low. Film cooling hole design parameters include inclination angle (α), compound angle (β ), hole inlet geometry and hole exit geometry. The influence of these parameters on aerodynamic loss and net heat flux reduction is investigated, with loss being the primary focus. Low-speed flat plate experiments have been conducted at momentum flux ratios of IR = 0.16, 0.64 and 1.44. The film cooling aerodynamic mixing loss, generated by the mixing of mainstream and coolant, can be quantified using a three-dimensional analytical model that has been previously reported by the authors. The model suggests that for the same flow conditions, the aerodynamic mixing loss is the same for holes with different α and β but with the same angle between the mainstream and coolant flow directions (angle κ). This relationship is assessed through experiments by testing two sets of cylindrical holes with different α and β : one set with κ = 35°, another set with κ = 60°. The data confirm the stated relationship between α, β, κ and the aerodynamic mixing loss. The results show that the designer should minimise κ to obtain the lowest loss, but maximise β to achieve the best heat transfer performance. A suggestion on improving the loss model is also given. Five different hole geometries (α =35.0°, β =0°) were also tested: cylindrical hole, trenched hole, fan-shaped hole, D-Fan and SD-Fan. The D-Fan and the SD-Fan have similar hole exits to the fan-shaped hole but their hole inlets are laterally expanded. The external mixing loss and the loss generated inside the hole are compared. It was found that the D-Fan and the SD-Fan have the lowest loss. This is attributed to their laterally expanded hole inlets, which lead to significant reduction in the loss generated inside the holes. As a result, the loss of these geometries is ≈ 50 % of the loss of the fan-shaped hole at IR = 0.64 and 1.44. Copyright © 2011 by ASME.

Design of brushless doubly-fed machines based: On magnetic circuit modeling

This paper proposes a magnetic circuit model (MCM) for the design of a brushless doubly-fed machine (BDFM). The BDFM possesses advantages in terms of high reliability and reduced gearbox stages, and it requires a fractionally-rated power converter. This makes it suitable for utilization in offshore wind turbines. It is difficult for conventional design methods to calculate the flux in the stator because the two sets of stator windings, which have different pole number, form a complex flux pattern which is not easily determined using common analytical approaches. However, it is advantageous to predict the flux density in the teeth and air-gap at the initial design stage for sizing purposes without recourse finite element analysis. Therefore a magnetic circuit model is developed in this paper to calculate the flux density. A BDFM is used as a case study with FEA validation. © 1965-2012 IEEE.