Reply to the editor

We appreciate the comments and concerns expressed by Arakawa and colleagues regarding our article, titled “Pulsatile control of rotary blood pumps: Does the modulation waveform matter?”1 Unfortunately, we have to disagree with Arakawa and colleagues. As is obvious from the title of our article, it investigates the effect of different waveforms on the heart–device interaction. In contrast to the authors' claim, this is the first article in the literature that uses basic waveforms (sine, triangle, saw tooth, and rectangular) with different phase shifts to examines their impact on left ventricular unloading. The previous publications2, 3 and 4 just varied the pump speed during systole and diastole, which was first reported by Bearnson and associates5 in 1996, and studied its effect on aortic pressure, coronary flow, and end-diastolic volume. We should mention that dp/dtmax is a load-sensitive parameter of contractility and not representative for the degree of unloading. Moreover, none of the aforementioned reports has studied mechanical unloading and in particular the stroke work of the left ventricle. Our method is unique because we do not just alternate between high and low speed but have accurate control of the waveform because of the direct drive system of Levitronix Technologies LLC (Waltham, Mass) and a custom-developed pump controller. Without referring, Arakawa and associates state “several previous studies have already reported the coronary flow diminishes as the left ventricular assist device support increases.” It should be noted that all the waveforms used in our study have 2000 rpm average value with 1000 rpm amplitude, which is not an excessive speed for the CentriMag rotary pump (Levitronix) to collapse the ventricle and diminish the coronary flow. We agree with Arakawa and coworkers that there is a need for a heart failure model to come to more relevant results with respect to clinical expectations. However, we have explored many existing models, including species and breeds that have a native proneness to cardiomyopathy, but all of them differ from the genetic presentation in humans. We certainly do not believe that the use of microembolization, in which the coronary circulation is impaired by the injection of microspheres, would form a good model from which to draw conclusions about coronary flow change under different loading conditions. A model would be needed in which either an infarct is created to mimic ischemic heart failure or the coronary circulation remains untouched to simulate, for instance, dilated cardiomyopathy. Furthermore, in discussion we clearly mention that “lack of heart failure is a major limitation of our study.” We also believe that unloading is not the only factor of the cardiac functional recovery, and an excessive unloading of the left ventricle might lead to cardiac tissue atrophy. Therefore, in our article we mention that control of the level of cardiac unloading by assist devices has been suggested as a mechanical tool to promote recovery, and more studies are required to find better strategies for the speed modulation of rotary pumps and to achieve an optimal heart load control to enhance myocardial recovery. Finally, there are many publications about pulsing rotary blood pumps and it was impossible to include them all. We preferred to reference some of the earlier basic works such as an original research by Bearnson and coworkers5 and another article published by our group,6 which is more relevant.

Proceedings of the Sixteenth Annual Biochemical Engineering Symposium

This volume represents the proceedings of the Sixteenth Annual Biochemical Engineering Symposium held at Kansas State University on April 26, 1986. Some of the papers describe the progress of ongoing projects, and others contain the results of completed projects. Only brief summaries are given of many of the papers that will be published in full elsewhere. ContentsEnd-Product Inhibition of the Acetone-Butanol Fermentation—Bob Kuhn, Colorado State University Effect of Multiple Substrates in Ethanal Fermentations from Cheese Whey—C.J. Wang, University of Missouri Extraction and Fermentation of Ensiled Sweet Sorghum—Karl Noah, Colorado State University Removal of Nucleic Acids from Bakers' Yeast—Richard M. Cordes, Iowa State University Modeling the Effects of Plasmid Replication and Product Repression on the Growth Rate of Recombinant Bacteria—William E. Bentley, University of Colorado Indirect Estimates of Cell Concentrations in Mass Cultivation of Bacterial Cells—Andrew Fisher, University of Missouri A Mathematical Model for Liquid Recirculation in Airlift Columns—C.H.Lee, Kansas State University Characterization of Imperfect Mixing of Batch Reactors by Two Compartment Model—Peter Sohn, University of Missouri First Order Breakage Model for the Degradation of Pullalan in the Batch Fermentor—Stephen A. Milligan, Kansas State University Synthesis and Nuclear Magnetic Resonance of 13C-Labeled Amylopectin and Maltooligosaccharides—Bernard Y. Tao, Iowa State University Preparation of Fungal Starter Culture in Gas Fluidized Bed Reactor—Pal Mihaltz, Colorado State University Yeast Flocculation and Sedimentation—David Szlag, University of Colorado Protein Enrichment of Extrusion Cooked Corn by Solid Substrate Fermentation—Lucas Alvarez-Martinez, Colorado State University Optimum Design of a Hollow Fiber Mammalian Cell Reactor—Thomas Chresand, Colorado State University Gas Chromatography and Nuclear Magnetic Resonance of Trifluoroacetylated Carbohydrates—Steven T. Summerfelt, Iowa State University Kinetic and Bioenergetic Considerations for Modeling Photosynthetic Microbial P~ocesses in Producing Biomass and Treating Wastewater—H. Y. Lee, Kansas State University Mathematical Modeling and Simulation of Bicarbonate-Limited Photsynthetic Growth in Continuous Culture—Craig Curless, Kansas State University Data Acquisition and Control of a Rotary Drum Solid State Fermentor—Mnasria A. Habib, Colorado State University Biodegradation of 2,4-Dichlorophenoxyacetic Acid (2,4-D)—Greg Sinton, Kansas State University

Calcareous dinoflagellate cycst in the mid-Cenomanian Boreal realm

A transect from the bathyal to proximal shelf facies of the Boreal Realm was investigated to compare spatial and temporal distribution changes of calcareous dinoflagellate cysts (c-dinocysts) throughout the mid-Cenomanian in order to gain information on the ecology of these organisms. Pithonelloideae dominated the cyst assemblages to more than 95% on the shelf, a prevalence that can be observed throughout most of the Upper Cretaceous. The affinity of this group with the dinoflagellates, which is still controversially discussed, can be confirmed, based on evidence from morphological features and distribution patterns. The consistent prevalence of Pithonella sphaerica and P. ovalis in c-dinocyst assemblages throughout the Upper Cretaceous indicates that they were produced more frequently than cysts of the other species and might, therefore, represent a vegetative dinoflagellate life stage. P. sphaerica and P. ovalis are interpreted as eutrophic species. P. sphaerica is the main species in a marginal-shelf upwelling area, offshore Fennoscandia. Here, sedimentary cyclicity appears to have been reduced to the strongest light/dark changes, while in the outer shelf sediments, light/dark cycles are well-developed and show pronounced temporal assemblage changes. Cyclic fluctuations in the P. sphaerica / P. ovalis ratio reflect shifts of the preferred facies zones and indicate changes in surface mixing patterns. During periods of enhanced surface mixing most parts of the shelf were well-ventilated, and nutrient-enriched surface waters led to high productivity and dominance of the Pithonelloideae. These conditions on the shelf contrasted with those in the open ocean, where more oligotrophic and probably stratified waters prevailed, and an assemblage with very few Pithonelloideae and dominance of Cubodinellum renei and Orthopithonella ? gustafsonii was characteristic. While orbitally-forced light/dark sedimentary cyclicity of the shelf sections was mainly related to surface-water carbonate productivity changes, no cyclic modulation of productivity was observed in the oceanic profile. Therefore, dark layer formation in the open ocean was predominantly controlled by the cyclic establishment of anoxic bottom water conditions. Orbitally-forced interruptions in mixing on the shelf resulted in cyclic periods of stratification and oligotrophy in the surface waters, an expansion of oceanic species to the outer shelf, and a shelfward shift of pithonelloid-facies zones, which were probably related to shelfward directed oceanic ingressions.

(Table 1) Magnetozone boundaries at DSDP Site 68-502

Obtaining long, continuous, and undisturbed sections of unconsolidated Neogene deep sea sedimentary sections has been limited by (1) practical length of piston cores to about 30 meters and (2) disturbance of sediment by rotary drilling with Glomar Challenger. The relatively high deposition rates of late Neogene sediments in the North Atlantic and in the Caribbean in particular has limited penetration, with conventional piston coring, to sediments not much older than late Pliocene in the Atlantic and not even through the late Pleistocene in the Caribbean. Rotary drilling has penetrated much older sediments in both areas, but the cores suffered extensive drilling disturbance that seriously degrades the Paleomagnetism of the material. Utilization of the hydraulic piston corer on the Challenger combines the advantage of a generally undisturbed recovery and great penetration to produce long, relatively undisturbed sections of late Neogene and Quaternary sediments suitable for paleomagnetic studies. In this chapter we present paleomagnetic data from Site 502. We tried to determine relative azimuthal orientation of successive cores (see Introduction for details). Because the low latitude of the site meant a small (inclination of about 22°) vertical component of magnetization, reversals of magnetization could easily be detected only in changes in the horizontal component, as 180° shifts in the declination direction of magnetization. Based on information from the core orienting device, a fiducial line was drawn the length of each core prior to cutting it into the standard 1.5 meter sections.

Extracto de semillas de vid (Vitis vinifera L.) con actividad antioxidante : concentración, deshidratación y comparación con antioxidantes de uso comercial

Los objetivos de este trabajo fueron: 1) Evaluar un proceso de concentración y deshidratación de un extracto polifenólico de semillas de vid (Vitis vinifera L.). El proceso debía conservar el poder reductor del extracto. 2) Valorar la eficiencia del antioxidante obtenido por comparación con antioxidantes de uso habitual en un producto vegetal susceptible de ser oxidado, tal como el jugo de manzanas. El extracto de semillas de vid fue concentrado a 60°C en un concentrador rotativo al vacío de laboratorio. La concentración de los compuestos fenólicos fue determinada por el método de Folin-Ciocalteu modificado. La actividad antioxidante se determinó midiendo el poder reductor, por el método de Oyaizu. La oxidación del jugo de manzanas se determinó por el método de Özoglu. El extracto concentrado obtenido fue deshidratado por dos métodos: liofilización y secado en lecho de espuma. A igual concentración fenólica, el extracto concentrado mostró mayor capacidad antioxidante que el extracto simple. El extracto secado en lecho de espuma conservó la misma capacidad antioxidante que el extracto concentrado. El extracto liofilizado experimentó una pérdida significativa de la actividad antioxidante. El extracto concentrado de semillas de vid inhibió la oxidación del jugo de manzanas en un 31,51%, el ácido ascórbico en un 2,60% y el dióxido de azufre en un 97,40%.

Rastrojo de arroz (Oryza sativa L.) en sistemas de siembra directa : alternativas de manejo

Los objetivos principales del presente trabajo fueron: a) Estudiar cuál es el uso adecuado de las distintas herramientas para mejorar la mineralización del rastrojo de la cosecha de arroz (Oryza sativa L.) bajo siembra directa y b) Determinar, para períodos cortos, la cantidad de rastrojo depositado superficialmente y su tiempo de mineralización al utilizar las distintas técnicas de manejo del mismo. Los tratamientos fueron: cosechadora con desparramador deflector (T1DD), cosechadora sin desparramador triturador (T2SDT), cosechadora con desparramador centrífugo de caucho (T3DC) y cosechadora con desparramador metálico (T4DM). Alternativas implementadas: a) desmalezado b) rolo cuchilla y c) quemado de rastrojo. En las primeras dos alternativas, se aplicaron tres dosis de urea. Los resultados principales fueron: a) La T2SDT produjo, una mayor deposición de material en el centro de la máquina (21680 kg ha-1), b) la distribución de rastrojo de la (T3DC) fue más uniforme que para los otros tratamientos. Las principales conclusiones fueron: 1) Los desparramadores centrífugos de caucho y metálico produjeron mejor distribución del material, 2) El uso de desmalezadora o rolo cuchilla sobre rastrojo de los tratamientos T3DC y T4DM aceleró la mineralización de los mismos. 3) Las dosis de urea causó poco incremento en la mineralización del rastrojo.

Paleomagnetism at DSDP Leg 85 Holes

On Leg 85, 16 holes were cored at five sites. Thirteen of the holes were cored with the hydraulic piston corer (HPC) or the variable-length hydraulic piston corer (VLHPC) or both; the remainder were rotary drilled. Partially duplicating stratigraphic sections were successfully recovered by hydraulic piston coring at Sites 572 to 575. Sub-bottom penetration was deepest (about 210 m) at HPC Hole 575A, which bottomed in lower Miocene sediments. Penetration by hydraulic piston coring was limited at all sites not by the failure of the corer to stroke out but by the excessive force (overpull) necessary to retrieve the core barrel from the hole. The sediments recovered are relatively uniform siliceous-calcareous oozes to calcareous ooze-chalks. Paleomagnetic measurements were made at all stratigraphic levels, but magnetostratigraphic sequences could be resolved only for the Pleistocene-Pliocene and for brief upper, middle, and lower Miocene sections. In the younger and less consolidated sediments, the declination often shows large-scale azimuthal rotations downcore. These smooth trends vary from core to core, indicating either rotation between the sediment and the core liner or the rotation of the core barrel during the coring or retrieval process. Thus, azimuthal orientation of the samples was impossible even though a Kuster azimuthal orientation tool was used during the hydraulic piston coring. At all sites, the downhole shift from mainly siliceous to mainly calcareous ooze-chalk coincided with a decrease in NRM intensity of at least one order of magnitude, to 1.0*10**-8 G. Diagenesis is the probable reason for this behavior, although the dilution of magnetic carriers as the result of higher accumulation rates may also be a factor. A tectonic analysis using data from samples with stable remanence indicates a northward plate motion of about 0.3 deg/m.y. during the last 18 m.y., a rate that agrees with most previous reconstructions of Pacific Plate motion.

Sedimentation and mineral analysis on sediment cores from the Lena Delta

Core and outcrop analysis from Lena mouth deposits have been used to reconstruct the Late Quaternary sedimentation history of the Lena Delta. Sediment properties (heavy mineral composition, grain size characteristics, organic carbon content) and age determinations (14C AMS and IR-OSL) are applied to discriminate the main sedimentary units of the three major geomorphic terraces, which form the delta. The development of the terraces is controlled by complex interactions among the following four factors: (1) Channel migration. According to the distribution of 14C and IR-OSL age determinations of Lena mouth sediments, the major river runoff direction shifted from the west during marine isotope stages 5-3 (third terrace deposits) towards the northwest during marine isotope stage 2 and transition to stage 1 (second terrace), to the northeast and east during the Holocene (first terrace deposits). (2) Eustasy. Sea level rise from Last Glacial lowstand to the modern sea level position, reached at 6-5 ka BP, resulted in back-filling and flooding of the palaeovalleys. (3) Neotectonics. The extension of the Arctic Mid-Ocean Ridge into the Laptev Sea shelf acted as a halfgraben, showing dilatation movements with different subsidence rates. From the continent side, differential neotectonics with uplift and transpression in the Siberian coast ridges are active. Both likely have influenced river behavior by providing sites for preservation, with uplift, in particular, allowing accumulation of deposits in the second terrace in the western sector. The actual delta setting comprises only the eastern sector of the Lena Delta. (4) Peat formation. Polygenetic formation of ice-rich peaty sand (''Ice Complex'') was most extensive (7-11 m in thickness) in the southern part of the delta area between 43 and 14 ka BP (third terrace deposits). In recent times, alluvial peat (5-6 m in thickness) is accumulated on top of the deltaic sequences in the eastern sector (first terrace).

Biostratigraphy of selected taxa and radiolarian events in ODP Hole 183-1138A sediments

Well-preserved radiolarian assemblages of late middle Miocene to early Pliocene age are found in Ocean Drilling Program (ODP) Hole 1138A (Cores 183-1138A-12R to 20R), which was rotary drilled into the Central Kerguelen Plateau. The faunas are typical for Antarctic assemblages of this time interval, and the site appears to have been south of the Polar Front during the time period studied. Despite only moderate drilling recovery of the section, most late middle to early Pliocene radiolarian zones are present, although at the sample resolution used, subzones could not be identified. A significant discontinuity in the section is present at the boundary between lithologic Units I and II (between Cores 183-1138A-12R and 13R), corresponding to an interval from at least 4.6 to 6.1 Ma. Mixed late Miocene-early Pliocene assemblages are seen in the base of Core 183-1138A-12R (Sample 183-1138A-12R-3, 20 cm), and the overlying basal Pliocene Tau Zone appears to be absent. It cannot be determined if the discontinuity is due to incomplete recovery of the section and drilling disturbance or if it reflects a primary sedimentary structure - a hiatus or interval of condensed sedimentation.

Pleistocene and upper Pliocene sapropels in the Tyrrhenian Sea, Mediterranean Sea

A most significant finding of the ODP Leg 107 drilling campaign was the recovery of at least 56 distinct sapropel intervals in upper Pliocene to Pleistocene sediments of six sites drilled in the Tyrrhenian Sea. Except for 3 repots of disturbed organic-rich sediments - recovered in Core 201 of the Swedish Deep-Sea Expedition, in Core 2R-1,107 cm of Site 373 (Leg 13 DSDP) and at Site 373, Core 1-2,O-5 cm of DSDP Leg 42A - sapropels had previously only been described from the eastern Mediterranean and the Black Sea. Scientific deep-sea drilling in the Tyrrhenian Sea during DSDP Legs 13 and 42A apparently missed most of these deposits due to spot coring and rotary drilling techniques; high sedimentation rates may have precluded recovery by conventional gravity coring devices. The recovery of multiple layers of sapropels and sapropelic sediments in the Tyrrhenian Sea demonstrates that oceanographic conditions conducive to sapropel formation were not confined to the Black Sea and eastern Mediterranean, but occurred sporadically and possibly simultaneously in the entire Mediterranean during the Pliocene and Pleistocene. In the light of this finding, previous models of sapropel genesis may need reconsideration. In this paper, we present some initial data on the Tyrrhenian sapropels and suggest some implications of their massive occurrence in the western Mediterranean realm. We end by outlining possible causes for deposition of sapropels in an attempt to revive the interest in sapropels and their paleoceanographic significance.