Placentation in the rock cavy, Kerodon rupestris (Wied)

Rock cavies are rodents found in the semi-arid caatinga of Brazil. We studied the structure of the rock cavy placenta by light and transmission electron microscopy. The exchange area of the labyrinth was organized in lobes separated by interlobular areas. The interhaemal barrier was syncytial haemomonochorial. The syncytiotrophoblast had recesses in the basal membrane and some invaginations of the apical membrane, but transtrophoblastic channels could not be found. The interlobular regions comprised syncytiotrophoblast, enclosing maternal venous blood channels, and cytotrophoblast. There was a prominent subplacenta composed of cytotrophoblast and syncytiotrophoblast. Microvilli projected into spaces between the cytotrophoblasts and into lacunae within the syncytiotrophoblast. The yolk sac epithelium exhibited coated pits, endocytotic vesicles and larger vacuoles, consistent with a role in protein uptake from the uterine lumen. Tight junctions between these cells provided a barrier to diffusion by the intercellular route. The reproductive biology of the rock cavy differs from other members of the family, including the guinea pig, but the architecture of the placenta remains remarkably constant. (c) 2004 Elsevier Ltd. All rights reserved.

Influence of the yielding criterion on total forming force in metallic junctions using elastomers

The production of metallic junctions employing elastomers is an unconventional technique that has been in development in the last 20 years. The forming process gets successfull just if a simultaneous compression between the elastomers and the tube takes place. Exact solutions for problems involving forming with elastomers are quite difficult to determine. However, the upper-bound theory can be used in order to predict the necessary load for junctions forming. Thus, it is necessary to develop a model capable to provide an estimate of the total forming force, which is useful to set-up tools and equipments required for the process. In this work, Von Mises, Hill's 1948 and Hill's 1979 associated yielding theories, and the Hosford's theory (1979) as well, were used in order to study the anisotropic behaviour on total forming force of junctions using elastomers, insuring the functionality of the proposed model. (c) 2006 Elsevier B.V. All rights reserved.

Combinatorial synthesis and directed evolution applied to the production of alpha-helix forming antimicrobial peptides analogues

Antimicrobial peptides (AMPs) are effector molecules of innate immune systems found in different groups of organisms, including microorganisms, plants, insects, amphibians and humans. These peptides exhibit several structural motifs but the most abundant AMPs assume an amphipathic alpha-helical structure. The alpha-helix forming antimicrobial peptides are excellent candidates for protein engineering leading to an optimization of their biological activity and target specificity. Nowadays several approaches are available and this review deals with the use of combinatorial synthesis and directed evolution in order to provide a high-throughput source of antimicrobial peptides analogues with enhanced lytic activity and specificity.

Model peptides mimic the structure and function of the N-terminus of the pore-forming toxin sticholysin II

To investigate the role of the N-terminal region in the lytic mechanism of the pore-forming toxin sticholysin II (St II), we studied the conformational and functional properties of peptides encompassing the first 30 residues of the protein. Peptides containing residues 1-30 (P1-30) and 11-30 (P11-30) were synthesized and their conformational properties were examined in aqueous solution as a function of peptide concentration, pH, ionic strength, and addition of the secondary structure-inducing solvent trifluoroethanol (TFE). CD spectra showed that increasing concentration, pH, and ionic strength led to aggregation of P1-30; as a consequence, the peptide acquired beta-sheet conformation. In contrast, P11-30 exhibited practically no conformational changes under the same conditions, remaining essentially structureless. Moreover, this peptide did not undergo aggregation. These differences clearly point to the modulating effect of the first 10 hydrophobic residues on the peptides aggregation and conformational properties. In TFE both the first ten hydrophobic peptides acquired alpha-helical conformation, albeit to a different extent, P11-30 displayed lower alpha-helical content. P1-30 presented a larger-fraction of residues in alpha-helical conformation in TFE than that found in St II's crystal structure for that portion of the protein. Since TFE mimics the membrane em,, such increase in helical content could also occur upon toxin binding to membranes and represent a step in the mechanism of pore formation. The peptides conformational properties correlated well with their functional behaviour. Thus, P1-30 exhibited much higher hemolytic activity than P11-30. In addition, P11-30 was able to block the toxin's hemolytic activity. The size of pores formed in red blood cells by P 1-30 was estimated by measuring the permeability PEGs of different molecular mass. The pore radius (0.95 +/- 0.01 nm) was very similar to that of the PEGs of different pore formed by the toxin. The results demonstrate that the synthetic peptide P1-30 is a good model of St 11 conformation and function and emphasize the contribution of the toxin's N-terminal region, and, in particular, the hydrophobic residues 1-10 to pore formation. (c) 2005 Wiley Periodicals, Inc.

Vascular organization of the hystricomorph placenta: a comparative study in the Agouti, capybara, guinea pig, paca and rock cavy

The placental vasculature of five hystricomorph rodents was examined by latex injection of the blood vessels, immunohistochemistry and scanning electron microscopy of vessel casts. The pattern of branching of the vessels is described at the level of fine structure. The placenta is divided into lobes separated by interlobular trophoblast. Fetal arteries course through the interlobular areas and give rise to capillaries from which blood drains into veins at the centre of the lobes. Maternal blood reaches the placenta through spiral arteries that pass around the perimeter of the subplacenta. They supply large maternal blood sinuses, lined by trophoblast, which run through the interlobular areas and into the centre of the lobes. Here they supply fine channels that run parallel to the fetal capillaries, so that maternal blood flows from the centre of the lobe to the periphery. This arrangement provides the morphological basis for countercurrent exchange. The maternal channels of the labyrinth drain into spaces formed by the latticework of the interlobular trophoblast and thence through venous lacunae to a basal venous lacunar ring. The subplacenta is supplied by a single fetal artery. The vessels within the subplacenta pursue a tortuous course with dilatations and constrictions as in an endocrine gland. (C) 2003 Elsevier Ltd. All rights reserved.

Evaluation of the components of production of the ricinus according of rates of calcareous rock and match

The soil of the Paraiba, in generality, are acid and with low levels of available match, seriously limiting the income of the plants. A research in vegetation house was lead, with the objective to evaluate doses of calcareous soil and match in the culture of ricinus. The treatments had been composites for five levels of match: 0.0; 80; 160; 240 and 360 kg ha(-1) of P(2)O(5) and four dosis of calcareous rock: 0.0; 2.5; 3.5 and 4.5 t ha(-1) in experimental delineation of blocks casualized with 4 factorial project x 3 (four levels of match and three doses of calcareous soil) more two treatments you add zero of match (0.0 P(2)O(5): 2,5 t ha(-1) of calcareous soil) and calcareous soil zero (240 P(2)O(5): 0.0 t ha(-1) of calcareous soil), with three repetitions. The calcareous soil reduced the acidity of the ground and effect of the application of the match (>= 80 kg ha(-1) of P(2)O(5)) in the presence of the collagen (>= 2.5 t ha(-1) of CaCO(3)) with of the calcareous soil (>= 2.5 t ha(-1) of CaCO(3)) in the presence of the match was not verified well (>= 80 kg ha(-1) of P(2)O(5)). The match applied in the absence of the calcareous soil was limited to the income of the culture of what the calcareous soil in the absence of the match.

The use of auxiliary courts by the lek-forming White-bearded Manakin Manacus manacus (Aves, Pipridae)

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Abundance and temporal-spatial distribution of the rock shrimp Sicyonia dorsalis Kingsley, 1878 (Decapoda, Penaeoidea) from the northern coast of São Paulo state, Brazil.

Abundance and ecological distribution of the rock shrimp Sicyonia dorsalis from the northern coast of São Paulo State (Brazil) was investigated during a two-year period (July 2001 to June 2003). Monthly collections were conducted in the Ubatuba (UBA) and Caraguatatuba (CA) regions, using a commercial shrimp boat equipped with double-rig nets. In each region, seven depths were delimited (5 m to 35 m). A total of 1,752 and 1,894 shrimp were obtained at UBA and CA, respectively. The distribution of S. dorsalis differed among depths, years, and seasons. Highest abundance values were recorded in depths where silt and clay comprised more than 70% of the sediment. The majority (89%) of captured specimens were caught in the first year, in periods of lower mean temperature, mainly in the spring of 2001, when the intrusion of cold South Atlantic Central Waters (SACW) was more intense. In such period, the differences in the abundance of shrimps in each region (UBA = 1,118 and CA = 493) suggested that S. dorsalis migrated to the north (UBA), during the SACW intrusion. Thus, sediment type and water temperature are among the most important variables affecting the bathymetric distribution of S. dorsalis in these regions.

Hydrogenated amorphous carbon as protective coating for a forming tool

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Lubricating coating prepared by PIIID on a forming tool

In this work, the performance of a-C: H films produced by the hybrid Plasma Immersion Ion Implantation and Deposition technique as lubricating layers for a steel forming tool has been investigated. Hardened steel (AISI M2, 64 HRC) plates coated with a commercial TiN layer were used as substrates and the films were deposited in a vacuum chamber fitted with two parallel-plate electrodes. The discharges were generated in atmospheres composed of 91% C2H2 and 9% Ar by the application of radiofrequency power (13.56 MHz, 100 W) to the upper electrode while the lower one, also used as the sample holder, was biased with high voltage negative pulses (3.6 kV, 30 mu s, 300 Hz). A deposition time of 840 s was used. The effects of the gas pressure, p, on thickness, molecular structure, wettability, surface morphology and topography, hardness and friction coefficient of the films lwere investigated. Film thickness increased from 0.3 to 0.5 mu m when p was increased from 2.7 to 16.5 Pa. Generally, the films were slightly hydrophilic, with contact angles of around 84 degrees, and the deposition decreased the roughness of the steel. A polymer-like structure was detected in high pressure depositions and an amorphous carbon structure derived from the low pressure procedures. Hardness decreased from 8.2 to 7.0 GPa with increasing p. Improvement in tribological performance was indicated by the fall in the friction coefficient from 0.5 to 0.2 as the deposition pressure was reduced. Operating at the latter value (of mu) would lead to a significant reduction in wear and hence to significant economy in diverse industrial applications.

Factors determining rock phosphate solubilization by microorganisms isolated from soil

Forty two soil isolates (31 bacteria and 11 fungi) were studied for their ability to solubilize rock phosphate and calcium phosphate in culture medium. Eight bacteria and 8 fungi possessed solubilizing ability. Pseudomonas cepacia and Penicillium purpurogenum showed the highest activity. There was a correlation between final pH value and titratable acidity (r = - 0.29 to -0.87) and between titratable acidity and soluble phosphate (r = 0.22 to 0.99). Correlation values were functions of insoluble phosphate and of the group of microorganisms considered. A high correlation was observed between final pH and soluble phosphate only for the rock phosphates inoculated with the highest concentration of solubilizing bacteria (r = -0.73 to -0.98).

Sm-Nd system in total rock open versus closed isotopic composition in zones of high deformation

High strain shear zones of Brasiliano age, developed in Paleoproterozoic basement gneiss of the Caicó region, Borborema Province, NE Brazil, were associated with medium- to low-grade metamorphism and deformational processes that transformed porphyritic augen gneiss into muscovite quartzite, modifying their original mineralogy and chemical properties. During the last hydrothermal event mobility of major, minor and trace elements was great, whereas the pattern of Rare Earth Elements was not changed. We carried out a Sm-Nd isotopic study in these rocks in order to understand the behavior of Nd isotopes during mylonite generation. TDM model ages at around 2.6 Ga and εNd (t) values for both protolith and transformed rock suggest that the Nd isotopic system remained closed, recording the original source rock signature, despite undergoing two superposed metamorphic events. These new Sm-Nd results provide important information on the geologic evolution of basement rocks in the central Rio Grande do Norte Terrane of the Borborema Province, NE Brazil.

Geologic e geoquímica do batólito Rapakivi Rio Branco, SW do Craton Amazônico - MT

The Rio Branco Rapakivi Batholith belongs to the Cachoeirinha Tectonic Domain, part of the Rio Negro-Juruena Geochronological Province located on the southwestern portion of the Amazonian Craton in Mato Grosso, Central Brasil. A systematic geological mapping on a 1:100.000 scale, coupled with petrographic and geochemical studies allowed to redefine this batholithic unit, to recognize faciological variations and to characterize the geochemical features of this rapakivi magmatism. The batholith is constituted by two major plutonic suites, the first forming a basic suite of fine-grained, equigranular, mesoto melanocratic gray to black lithotypes, with usually discontinuous porphyritic varieties located near the margins of the intrusion. The second one is characterized by acid to intermediate rocks constituted by porphyritic granites, in part granophyric, with rapakivi textures. They have K-feldspar phenocrysts of up to 4cm. Three distinct petrographic facies are recognized in this suite: 1. equigranular to pegmatitic monzogranites; 2. red rapakivi leuco-monzogranites; 3. dark red rapakivi monzogranites to quartz-monzonites. Rocks present SiO2 contents from 67% to 73%, show peraluminous to metaluminous compositions and define a high-K calc-alkaline to shoshonitic magmatism in an I- and A-type, post-orogenic to anorogenic intraplate environment. The magmatic processes are associated with the end of the collisional event that consolidated and stabilized the SW part of the Amazonian Craton.

Blade design and forming for fans using finite elements

The necessity of adapting the standardized fan models to conditions of higher temperature has emerged due to the growth of concerning referring to the consequences of the gas expelling after the Mont Blanc tunnel accident in Italy and France, where even though, with 100 fans in operation, 41 people died. However, since then, the defied solutions have pointed to aerodynamic disadvantages or have seemed nonappropriate in these conditions. The objective of this work is to present an alternative to the market standard fans considering a new technology in constructing blades. This new technology introduces the use of the stainless steel AISI 409 due to its good adaptation to temperatures higher than 400°C, particularly exposed to temperatures of gas exhaust from tunnels in fire situation. Furthermore, it presents a very good resistance to corrosion and posterior welding and pressing, due to its alloyed elements. The innovation is centered in the process of a deep drawing of metallic shells and posterior welding, in order to keep the ideal aerodynamic superficies for the fan ideal performance. On the other hand, the finite element method, through the elasto-plastic software COSMOS permitted the verification of the thickness and structural stability of the blade in relation to the aerodynamic efforts established in the project. In addition, it is not advisable the fabrication of blades with variable localized thickness not even, non-uniform ones, due to the verified concentration of tensions and the difficulties observed in the forming. In this way, this study recommends the construction of blades with uniform variations of thickness. © 2007 Springer.