Physical and mechanical characterization of a recycled polypropylene and wood flour without additives

Recycled polymer matrix composites reinforced with wood flour can be a viable alternative for the replacement of wood and virgin polymers in materials used in floors, door frames, windows and external cladding. The objective of this research was to determine some physical and mechanical parameters of composite made with Pinus taeda and elliottii wood flour (WF) and recycled polypropylene (PP), without the use of compatibilizers or additives. The composites were separated into four traits, namely 100% PP, 90% PP with 10%, WF 80% PP with 20% WF and 70 % PP with 30% WF. The characterization of the composite followed the standards ASTM D-638-10, ASTM D256-00, ASTM D570 -98, ASTM D1238 -10 and ASTM G 155-05, it was also employed the surface analysis by scanning electron microscopy. The dimensional stability tests showed satisfactory results. Even the composite with a higher percentage of wood flour (30%) had a flow index of 10 MFI, considered compatible with that observed for PP (polypropylene) virgin by standard ASTM D 1238-10. The inclusion of wood flour (FM) afforded composites with good mechanical characteristics which can be applied in manufacture of different materials, specifically employed outdoors.

Ethanol production by Zymomonas mobilis during sucrose fermentation: Optimization of culture conditions using factorial design

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

O Serviço Social e a avaliação de impacto na gestão de programas e projetos empresariais

Pós-graduação em Serviço Social - FCHS

Gestão de resíduos sólidos no município de Tibagi - PR: desempenho da coleta seletiva

The objective of this study was to analyze the performance of solid waste management in the municipality of Tibagi, Paraná, a city with approximately 20000 inhabitants, which implemented the selective collection program called Recycle Tibagi. The analysis was based on descriptive statistical techniques, considering the three types of waste (tailings, organic and recyclable), and per capita generation of garbage upward trend in the coming years, based on the method of Winter (Triple Exponential Damping), using data recorded by the Department of the Environment and the Association of Recyclable Materials from Tibagi - ACAMARTI. Efficient selective collection from a structured environmental education program with constant training conducted with the scavengers, possible to obtain important data in sorting and marketing of recyclable materials, saving raw materials, water and energy, as well as relevant indicators social inclusion and employment generation and income. The project involves several areas of municipal management and arouses curiosity and interest in several areas: social, financial, environmental and administrative. It's a way to encourage new projects and public bodies, highlighting the importance of recycling and proper disposal of solid waste.

Liberação de nutrientes da palhada de forrageiras consorciadas com milho e sucessão com soja

In tropical regions there is rapid decomposition of plant material deposited on the soil, and the ability to recycle nutrients through this decomposition is one of the most important aspects of cover crops. The aim of this study was to evaluate the yield and nutrient release from forage crops intercropped with maize for silage, and soybean in succession. The study was conducted in the experimental area of Universidade Estadual Paulista, Ilha Solteira campus, Brazil. The experiment consisted of maize for silage intercropped with four forage species (Urochloa brizantha cv. Marandu, Urochloa ruziziensis, Panicum maximum cv. Tanzania, and Panicum maximum cv. Aries) sown in three modalities: in the maize row, together with fertilizer; broadcast at maize sowing; and broadcast in the V4 stage of maize, in a randomized block design in a 4 x 3 factorial arrangement with four replications. The evaluation of nutrient release was performed during the soybean cropping that followed the intercropping by the litter bag method at 30, 60, 90, and 120 days after sowing of soybean. Panicum maximum cv. Tanzania showed higher dry matter yield when sown by broadcasting at maize sowing. Sowing of forages in the maize row, and through broadcasting at maize sowing led to greater dry matter yield for straw formation. Intercropping of maize with forages in the autumn is an alternative for increasing the amount of straw and cycling of macronutrients in a no-till system. Potassium was the nutrient with the greatest accumulation in the forage straws (up to 150 kg ha(-1)), with 100 % release at 90 days after sowing soybean. The forage straws are thus an excellent alternative for cycling of this nutrient. Panicum maximum cv. Tanzania sown by broadcasting at the time of maize sowing showed greater phosphorus cycling (13 kg ha(-1)). Panicum maximum cv. Tanzania broadcast in the V4 stage of maize is the option with least potential for straw production and nutrient cycling, while the other options (forages and sowing modalities) have higher potential for use, at the criteria of machine availability for setting up intercropping with corn.

Diagnóstico e gestão dos resíduos gerados em aterro sanitário

The issue of environmental impacts to human health and the generation and disposal of solid waste has led to a change of paradigms for your face, highlighting the need for sustainable management of municipal solid waste (MSW). In this context, the expansion of landfills in Brazil in recent decades makes it necessary to sustainable management of waste generated by this type of enterprise, since its implementation. The aim of this study was to perform a diagnosis of the generation of waste in a landfill, in the expansion phase, and the alternatives adopted for its management. The qualitative diagnosis was made from observations on site and the wastes were classified and quantified from August 2011 to January 2012. In the diagnosis was considered the reduction, reuse and recycle, in that order. The results of this study showed that the residue of the greatest generation was PEAD geomembranes used in the waterproofing of the landfill, reaching 7 t, followed by PVC pipes, which reached 850 kg, both destined for recycling. The largest volume of wastewater generated corresponded to the leachate, reaching 11,500 m3 , which were sent for treatment

The influence of the degree of back-mixing on hydrogen production in an anaerobic fixed-bed reactor

This paper reports on results obtained from experiments carried out in an acidogenic anaerobic reactor aiming at the optimization of hydrogen production by altering the degree of back-mixing. It was hypothesized that there is an optimum operating point that maximizes the hydrogen yield. Experiments were performed in a packed-bed bioreactor by covering a broad range of recycle ratios (R) and the optimum point was obtained for an R value of 0.6. In this operating condition the reactor behaved as 8 continuous stirred-tank reactors in series and the maximum yield was 4.22 mol H-2 mol sucrose(-1). Such optimum point was estimated by deriving a polynomial function fitted to experimental data and it was obtained as the conjugation of three factors related to the various degrees of back-mixing applied to the reactor: mass transfer from the bulk liquid to the biocatalyst, liquid-to-gas mass transfer and the kinetic behavior of irreversible reactions in series. Copyright (C) 2012, Hydrogen Energy Publications, LLC. Published by Elsevier Ltd. All rights reserved.

Closed-loop stable model predictive control of integrating systems with dead time

Model predictive control (MPC) applications in the process industry usually deal with process systems that show time delays (dead times) between the system inputs and outputs. Also, in many industrial applications of MPC, integrating outputs resulting from liquid level control or recycle streams need to be considered as controlled outputs. Conventional MPC packages can be applied to time-delay systems but stability of the closed loop system will depend on the tuning parameters of the controller and cannot be guaranteed even in the nominal case. In this work, a state space model based on the analytical step response model is extended to the case of integrating time systems with time delays. This model is applied to the development of two versions of a nominally stable MPC, which is designed to the practical scenario in which one has targets for some of the inputs and/or outputs that may be unreachable and zone control (or interval tracking) for the remaining outputs. The controller is tested through simulation of a multivariable industrial reactor system. (C) 2012 Elsevier Ltd. All rights reserved.

Treatment of Domestic Sewage in an Anaerobic-Aerobic Fixed-bed Reactor with Recirculation of the Liquid Phase

This study reports the performance of a combined anaerobic-aerobic packed-bed reactor that can be used to treat domestic sewage. Initially, a bench-scale reactor was operated in three experimental phases. In the first phase, the anaerobic reactor was operated with an average organic matter removal efficiency of 77% for a hydraulic retention time (HRT) of 10 h. In the second phase, the reactor was operated with an anaerobic stage followed by an aerobic zone, resulting in a mean value of 91% efficiency. In the third and final phase, the anaerobic-aerobic reactor was operated with recirculation of the effluent of the reactor through the anaerobic zone. The system yielded mean total nitrogen removal percentages of 65 and 75% for recycle ratios (r) of 0.5 and 1.5, respectively, and the chemical oxygen demand (COD) removal efficiencies were higher than 90%. When the pilot-scale reactor was operated with an HRT of 12 h and r values of 1.5 and 3.0, its performance was similar to that observed in the bench-scale unit (92% COD removal for r = 3.0). However, the nitrogen removal was lower (55% N removal for r = 3.0) due to problems with the hydrodynamics in the aerobic zone. The anaerobic-aerobic fixed-bed reactor with recirculation of the liquid phase allows for concomitant carbon and nitrogen removal without adding an exogenous source of electron donors and without requiring any additional alkalinity supplementation.

Solvable model for template coexistence in protocells

Compartmentalization of self-replicating molecules (templates) in protocells is a necessary step towards the evolution of modern cells. However, coexistence between distinct template types inside a protocell can be achieved only if there is a selective pressure favoring protocells with a mixed template composition. Here we study analytically a group selection model for the coexistence between two template types using the diffusion approximation of population genetics. The model combines competition at the template and protocell levels as well as genetic drift inside protocells. At the steady state, we find a continuous phase transition separating the coexistence and segregation regimes, with the order parameter vanishing linearly with the distance to the critical point. In addition, we derive explicit analytical expressions for the critical steadystate probability density of protocell compositions.

Il nucleotide extracellulare UTP: induzione della migrazione di cellule staminali emopoietiche CD34+

La letteratura scientifica degli ultimi anni si è arricchita di un numero sempre crescente di studi volti a chiarire i meccanismi che presiedono ai processi di homing di cellule staminali emopoietiche e del loro attecchimento a lungo termine nel midollo osseo. Tali fenomeni sembrano coinvolgere da un lato, l’interazione delle cellule staminali emopoietiche con la complessa architettura e componente cellulare midollare, e dall’altro la riposta ad un’ampia gamma di molecole regolatrici, tra le quali chemochine, citochine, molecole di adesione, enzimi proteolitici e mediatori non peptidici. Fanno parte di quest’ultimo gruppo anche i nucleotidi extracellulari, un gruppo di molecole-segnale recentemente caratterizzate come mediatori di numerose risposte biologiche, tra le quali l’allestimento di fenomeni flogistici e chemiotattici. Nel presente studio è stata investigata la capacità dei nucleotidi extracellulari ATP ed UTP di promuovere, in associazione alla chemochina CXCL12, la migrazione di cellule staminali umane CD34+. E’ così emerso che la stimolazione con UTP è in grado di incrementare significativamente la migrazione dei progenitori emopoietici in risposta al gradiente chemioattrattivo di CXCL12, nonché la loro capacità adesiva. Le analisi citofluorimetriche condotte su cellule migranti sembrano inoltre suggerire che l’UTP agisca interferendo con le dinamiche di internalizzazione del recettore CXCR4, rendendo così le cellule CD34+ maggiormente responsive, e per tempi più lunghi, al gradiente attrattivo del CXCL12. Saggi di homing competitivo in vivo hanno parallelamente mostrato, in topi NOD/SCID, che la stimolazione con UTP aumenta significativamente la capacità dei progenitori emopoeitci umani di localizzarsi a livello midollare. Sono state inoltre indagate alcune possibili vie di trasduzione del segnale attivate dalla stimolazione di recettori P2Y con UTP. Esperimenti di inibizione in presenza della tossina della Pertosse hanno evidenziato il coinvolgimento di proteine Gαi nella migrazione dipendente da CXCL12 ed UTP. Ulteriori indicazioni sono provenute dall’analisi del profilo trascrizionale di cellule staminali CD34+ stimolate con UTP, con CXCL12 o con entrambi i fattori contemporaneamente. Da questa analisi è emerso il ruolo di proteine della famiglia delle Rho GTPasi e di loro effettori a valle (ROCK 1 e ROCK 2) nel promuovere la migrazione UTP-dipendente. Questi dati sono stati confermati successivamente in vitro mediante esperimenti con Tossina B di C. Difficile (un inibitore delle Rho GTPasi) e con Y27632 (in grado di inibire specificatamente le cinasi ROCK). Nel complesso, i dati emersi in questo studio dimostrano la capacità del nucleotide extracellulare UTP di modulare la migrazione in vitro di progenitori emopoietici umani, nonché il loro homing midollare in vivo. L’effetto dell’UTP su questi fenomeni si esplica in concerto con la chemochina CXCL12, attraverso l’attivazione concertata di vie di trasduzione del segnale almeno parzialmente condivise da CXCR4 e recettori P2Y e attraverso il reclutamento comune di proteine ad attività GTPasica, tra le quali le proteine Gαi e i membri della famiglia delle Rho GTPasi.