Improvement of bio-oil stability in wood pyrolysis process

Pyrolysis is one of several thermochemical technologies that convert solid biomass into more useful and valuable bio-fuels. Pyrolysis is thermal degradation in the complete or partial absence of oxygen. Under carefully controlled conditions, solid biomass can be converted to a liquid known as bie-oil in 75% yield on dry feed. Bio-oil can be used as a fuel but has the drawback of having a high level of oxygen due to the presence of a complex mixture of molecular fragments of cellulose, hemicellulose and lignin polymers. Also, bio-oil has a number of problems in use including high initial viscosity, instability resulting in increased viscosity or phase separation and high solids content. Much effort has been spent on upgrading bio-oil into a more usable liquid fuel, either by modifying the liquid or by major chemical and catalytic conversion to hydrocarbons. The overall primary objective was to improve oil stability by exploring different ways. The first was to detennine the effect of feed moisture content on bio-oil stability. The second method was to try to improve bio-oil stability by partially oxygenated pyrolysis. The third one was to improve stability by co-pyrolysis with methanol. The project was carried out on an existing laboratory pyrolysis reactor system, which works well with this project without redesign or modification too much. During the finishing stages of this project, it was found that the temperature of the condenser in the product collection system had a marked impact on pyrolysis liquid stability. This was discussed in this work and further recommendation given. The quantity of water coming from the feedstock and the pyrolysis reaction is important to liquid stability. In the present work the feedstock moisture content was varied and pyrolysis experiments were carried out over a range of temperatures. The quality of the bio-oil produced was measured as water content, initial viscosity and stability. The result showed that moderate (7.3-12.8 % moisture) feedstock moisture led to more stable bio-oil. One of drawbacks of bio-oil was its instability due to containing unstable oxygenated chemicals. Catalytic hydrotreatment of the oil and zeolite cracking of pyrolysis vapour were discllssed by many researchers, the processes were intended to eliminate oxygen in the bio-oil. In this work an alternative way oxygenated pyrolysis was introduced in order to reduce oil instability, which was intended to oxidise unstable oxygenated chemicals in the bio-oil. The results showed that liquid stability was improved by oxygen addition during the pyrolysis of beech wood at an optimum air factor of about 0.09-0.15. Methanol as a postproduction additive to bio-oil has been studied by many researchers and the most effective result came from adding methanol to oil just after production. Co-pyrolysis of spruce wood with methanol was undertaken in the present work and it was found that methanol improved liquid stability as a co-pyrolysis solvent but was no more effective than when used as a postproduction additive.

Femtosecond inscription of the first order Bragg gratings in pure fused silica

The fabrication of sub-micron periodic structures beyond diffraction limit is a major motivation for the present paper. We describe the fabrication of the periodic structure of 25 mm long with a pitch size of 260 nm which is less than a third of the wavelength used. This is the smallest reported period of the periodic structure inscribed by direct point-by-point method. A prototype of the add-drop filter, which utilizes such gratings, was demonstrated in one stage fabrication process of femtosecond inscription, in the bulk fused silica.

Factors affecting human reliability in the chemical process industry

This research was concerned with identifying factors which may influence human reliability within chemical process plants - these factors are referred to as Performance Shaping Factors (PSFs). Following a period of familiarization within the industry, a number of case studies were undertaken covering a range of basic influencing factors. Plant records and site `lost time incident reports' were also used as supporting evidence for identifying and classifying PSFs. In parallel to the investigative research, the available literature appertaining to human reliability assessment and PSFs was considered in relation to the chemical process plan environment. As a direct result of this work, a PSF classification structure has been produced with an accompanying detailed listing. Phase two of the research considered the identification of important individual PSFs for specific situations. Based on the experience and data gained during phase one, it emerged that certain generic features of a task influenced PSF relevance. This led to the establishment of a finite set of generic task groups and response types. Similarly, certain PSFs influence some human errors more than others. The result was a set of error type key words, plus the identification and classification of error causes with their underlying error mechanisms. By linking all these aspects together, a comprehensive methodology has been forwarded as the basis of a computerized aid for system designers. To recapitulate, the major results of this research have been: One, the development of a comprehensive PSF listing specifically for the chemical process industries with a classification structure that facilitates future updates; and two, a model of identifying relevant SPFs and their order of priority. Future requirements are the evaluation of the PSF listing and the identification method. The latter must be considered both in terms of `useability' and its success as a design enhancer, in terms of an observable reduction in important human errors.

Strategy making process, its content and context in small professional football clubs

This thesis examines the phenomenon of strategy. Making as practised by small professional football clubs. The study was undertaken because football clubs were perceived to have problems with strategy-making and because it was believed that the specific circumstances of football clubs could be outside the range of views covered by conventional views of strategy-making. The characteristics of the club environment are its uncertainty and unpredictability, simultaneous competition and co--operation, strong regulations, and a not-for-profit orientation. Small clubs in particular face a constant struggle for financial viability and survival, due in part to split business and playing objectives. The study was designed to establish the extent and nature of the difficulties clubs experience with a view to preparing the way for creating practical guidance on ways to overcome them. Clearly, in order to survive in the long term, small professional football clubs require very effective strategic decisions. This study has addressed this issue by inquiring into the nature of strategy making for these organisations with the objective to establish the general direction in which the football clubs in question should be moving. As a result, the main research question to guide this investigation was determined as: Why do small professional football clubs have difficulties making strategies. The investigation was based on an analysis the concept of strategy and its elements, the strategic vision and objectives, the process by which strategic action comes about, the strategic action itself, and the context within which this action occurs. Data has been collected, analysed and interpreted in relation to each of these elements. Together with a wide variety of published material, 20 small football clubs have been sampled and personal interviews were conducted with board members of those clubs. The findings indicate that small football clubs do indeed experience considerable difficulties in making strategies, the reasons for which lie both in the characteristics of their competitive environment and their approaches to strategy-making. The competitive environment is characterised by a cartel-like structure with a high degree of regulation, high levels of uncertainty, little control over the core product or the production process, short-term business cycles and a close geographical link between a club with its local market. The management of clubs is characterised by the need to balance conflicting sporting and business objectives. Formal planning techniques are of little use in the small football club context as decision-making processes have a strong political character and the development of novel strategies is hindered by a strong conservative, industry paradigm and a lack of financial and managerial resources. It is concluded that there is no simple advice to be given to clubs, as they must re-examine the relationship between their playing and business objectives to create a unified and workable approach.

Person-oriented and process-oriented teachers : an investigation of the links between ESOL teachers' personal belief systems and approaches to teaching

This thesis looks to two traditions in research into language teaching, teacher beliefs and classroom interaction, in order to investigate the question: Do teachers of ESOL have an identifiable and coherent system of beliefs about teaching and learning that may account for different approaches to teaching? A qualitative approach to research is taken, following a case study tradition, in order to carry out an in-depth study into the beliefs of six ESOL teachers. Five teachers participated in an initial pilot study and two subsequently became the main case studies for the research. The beliefs of a sixth teacher were then investigated to verify the findings. Semi-structured interviews and classroom observations were carried out with all the teachers. The teachers in the study were found to have personal belief systems that cohere around two orientations to teaching and learning - a person orientation and a process orientation. Moreover, the findings suggest that underlying the orientations is the perception that teachers have of their teacher identity, in terms of whether this is seen as a separate identity or as part of their personality. It is suggested that the two orientations may offer a powerful tool for teacher education as it is increasingly recognised that, in order to be effective, teacher educators must take into account the beliefs that teachers bring with them to training and development programmes. An initial investigations into the teachers’ classroom behaviour suggests that while their methodologies approach may be very similar there are fundamental differences in their interactions patterns and these differences may be a result of their own orientation. However, while teachers’ personal belief systems undoubtedly underlie their approach to teaching, further research is needed to establish the extent and the nature of the relationship between orientation and classroom interaction.

Leadership and the negotiation of order in small groups

This thesis is focussed on the role differentiationhypothesis as it relates to small groups (Bales, 1958). The hypothesis is systematically examined, both conceptually and empirically, in the light of the Equilibrium Hypothesis (Bales, 1953) and the Negotiated Order Theory of leadership (e.g. Hosking, 1988). Chapter 1 sketches in a context for the research,which was stimulated by attempts during the 60s and 70s to organise small groups without leaders (the leaderless group, based on isocratic principles). Chapter 2 gives a conceptual and developmental overview of Bales' work, concentrating on the Equilibrium Hypothesis. It is argued that Bales' conceptual approach, if developed, can potentially integrate the disparate small groups and leadership literatures. Chapters 3 and 4 examine the concepts `group', `leader' and `leadership' in terms of the Negotiated Order perspective. In chapter 3 it is argued that two aspects of the concept group need to be taken separately into account; physical attributes and social psychological aspects (the metaphysical glue). It is further argued that a collection of people becomes a group only when they begin to establish a shared sense of social order. In chapter 4 it is argued that leadership is best viewed as a process of negotiation between those who influence and those who are influenced, in the context of shared values about means and ends. It is further argued that leadership is the process by which a shared sense of social order is established and maintained, thus linking the concepts `leadership' and `group' in a single formulation. The correspondences with Bales' approach are discussed at the end of the chapter. Chapters 5 to 8 present a detailed critical description and evaluation of the empirical work which claims to show role differentiation or test the hypothesis, both Bales original work and subsequent studies. It is argued here, that the measurement and analytical procedures adopted by Bales and others, in particular the use of simple means as summaries of group structures, are fundamentally flawed, and that role differentiation in relation to particular identifiable groups has not been demonstrated clearly anywhere in the literature. Chapters 9 to 13 present the empirical work conducted for the thesis. 18 small groups are examined systematically for evidence of role differentiation using an approach based on early sociometry (Moreno, 1934). The results suggest that role differentiation, as described by Bales, does not occur as often as is implied in the literature, and not equivocally in any case. In particular structures derived from Liking are typically distributed or weak. This suggests that one of Bales' principal findings, that Liking varies independently of his other main dimensions, is the product of statistical artifact. Chapter 14 presents a general summary of results and presents some considerations about future research.

A knowledge-based system for process planning in a seamless steel tube plant

The thesis describes the work carried out to develop a prototype knowledge-based system 'KBS-SETUPP' to generate process plans for the manufacture of seamless tubes. The work is specifically related to a plant in which hollows are made from solid billets using a rotary piercing process and then reduced to required size and finished properties using the fixed plug cold drawing process. The thesis first discusses various methods of tube production in order to give a general background of tube manufacture. Then a review of the automation of the process planning function is presented in terms of its basic sub-tasks and the techniques and suitability of a knowledge-based system is established. In the light of such a review and a case study, the process planning problem is formulated in the domain of seamless tube manufacture, its basic sub-tasks are identified and capabilities and constraints of the available equipment in the specific plant are established. The task of collecting and collating the process planning knowledge in seamless tube manufacture is discussed and is mostly fulfilled from domain experts, analysing of existing manufacturing records specific to plant, textbooks and applicable Standards. For the cold drawing mill, tube-drawing schedules have been rationalised to correspond with practice. The validation of such schedules has been achieved by computing the process parameters and then comparing these with the drawbench capacity to avoid over-loading. The existing models cannot be simulated in the computer program as such, therefore a mathematical model has been proposed which estimates the process parameters which are in close agreement with experimental values established by other researchers. To implement the concepts, a Knowledge-Based System 'KBS- SETUPP' has been developed on Personal Computer using Turbo- Prolog. The system is capable of generating process plans, production schedules and some additional capabilities to supplement process planning. The system generated process plans have been compared with the actual plans of the company and it has been shown that the results are satisfactory and encouraging and that the system has the capabilities which are useful.

Computer aided process planning (CAPP) for flat rolling of copper alloys

The manufacture of copper alloy flat rolled metals involves hot and cold rolling operations, together with annealing and other secondary processes, to transform castings (mainly slabs and cakes) into such shapes as strip, plate, sheet, etc. Production is mainly to customer orders in a wide range of specifications for dimensions and properties. However, order quantities are often small and so process planning plays an important role in this industry. Much research work has been done in the past in relation to the technology of flat rolling and the details of the operations, however, there is little or no evidence of any research in the planning of processes for this type of manufacture. Practical observation in a number of rolling mills has established the type of manual process planning traditionally used in this industry. This manual approach, however, has inherent drawbacks, being particularly dependent on the individual planners who gain their knowledge over a long span of practical experience. The introduction of the retrieval CAPP approach to this industry was a first step to reduce these problems. But this could not provide a long-term answer because of the need for an experienced planner to supervise generation of any plan. It also fails to take account of the dynamic nature of the parameters involved in the planning, such as the availability of resources, operation conditions and variations in the costs. The other alternative is the use of a generative approach to planning in the rolling mill context. In this thesis, generative methods are developed for the selection of optimal routes for single orders and then for batches of orders, bearing in mind equipment restrictions, production costs and material yield. The batch order process planning involves the use of a special cluster analysis algorithm for optimal grouping of the orders. This research concentrates on cold-rolling operations. A prototype model of the proposed CAPP system, including both single order and batch order planning options, has been developed and tested on real order data in the industry. The results were satisfactory and compared very favourably with the existing manual and retrieval methods.

A new role for Low German? Language insertion as bilingual practice in the process of language shift

This article analyses language insertion as a bilingual communicative practice, applying a functional, speaker-focused approach to the study of sociolinguistics and language contact. The article is based on a study of contact phenomena in a formerly diglossic region in Northern Germany, where the previously spoken language – Low German – is in the process of being replaced by the dominant standard variety, German. It examines regional publications in order to establish the linguistic techniques by which Low German elements are incorporated into the Standard German texts and the communicative purposes that they serve. The paper concludes that in the process of language shift an emblematic repertoire from Low German is created which can be applied into the dominant contact language, German, for specific communicative purposes.

Motivational state and process within the sociolinguistic context : an Anglo-French comparative study of school pupils learning foreign languages

The aim of this study was to investigate the effect of the socio-cultural environment upon the motivation school children have to learn foreign languages. Motivation was therefore considered from a sociolinguistic, rather than from a psycholinguistic perspective, giving primary importance to contextual, as opposed to personal factors. In order to examine the degree of relationship between motivational intensity and the contextual factors of parental attitudes, amount of foreign language exposure and the employment related value of foreign language learning (FLL), data obtained from school children living in two distinct sociolinguistic environments (Mulhouse, France and Walsall, England) were compared and contrasted. A structured sample drawn from pupils attending schools in Mulhouse and Walsall supplied the data base for this research. The main thrust of the study was quantitative in approach, involving the distribution of almost 1000 questionnaires to pupils in both towns. This was followed up by the use of qualitative methods, in the form of in-depth interviews with an individually matched sample of over 50 French/English pupils. The findings of the study indicate that FLL orientations, attitudes and motivation vary considerably between the two sociolinguistic environments. Levels of motivation were generally higher in the French sample than in the English one. Desire to learn foreign languages and a commitment to expend effort in order to fulfil this desire were key components of this motivation. The study also found evidence to suggest that the importance accorded to FLL by the socio-cultural context, communicated to the child through the socialisation agents of the family, the mass media and prospective employers, is of key importance in FLL motivation.

The mathematical modelling of the environmental performance of buildings as an aid in the design process

This thesis is a theoretical study of the accuracy and usability of models that attempt to represent the environmental control system of buildings in order to improve environmental design. These models have evolved from crude representations of a building and its environment through to an accurate representation of the dynamic characteristics of the environmental stimuli on buildings. Each generation of models has had its own particular influence on built form. This thesis analyses the theory, structure and data of such models in terms of their accuracy of simulation and therefore their validity in influencing built form. The models are also analysed in terms of their compatability with the design process and hence their ability to aid designers. The conclusions are that such models are unlikely to improve environmental performance since: a the models can only be applied to a limited number of building types, b they can only be applied to a restricted number of the characteristics of a design, c they can only be employed after many major environmental decisions have been made, d the data used in models is inadequate and unrepresentative, e models do not account for occupant interaction in environmental control. It is argued that further improvements in the accuracy of simulation of environmental control will not significantly improve environmental design. This is based on the premise that strategic environmental decisions are made at the conceptual stages of design whereas models influence the detailed stages of design. It is hypothesised that if models are to improve environmental design it must be through the analysis of building typologies which provides a method of feedback between models and the conceptual stages of design. Field studies are presented to describe a method by which typologies can be analysed and a theoretical framework is described which provides a basis for further research into the implications of the morphology of buildings on environmental design.

The application of robotics to the turbine blade encapsulation process

A survey of the existing state-of-the-art of turbine blade manufacture highlights two operations that have not been automated namely that of loading of a turbine blade into an encapsulation die, and that of removing a machined blade from the encapsulation block. The automation of blade decapsulation has not been pursued. In order to develop a system to automate the loading of an encapsulation die a prototype mechanical handling robot has been designed together with a computer controlled encapsulation die. The robot has been designed as a mechanical handling robot of cylindrical geometry, suitable for use in a circular work cell. It is the prototype for a production model to be called `The Cybermate'. The prototype robot is mechanically complete but due to unforeseen circumstances the robot control system is not available (the development of the control system did not form a part of this project), hence it has not been possible to fully test and assess the robot mechanical design. Robot loading of the encapsulation die has thus been simulated. The research work with regard to the encapsulation die has focused on the development of computer controlled, hydraulically actuated, location pins. Such pins compensate for the inherent positional inaccuracy of the loading robot and reproduce the dexterity of the human operator. Each pin comprises a miniature hydraulic cylinder, controlled by a standard bidirectional flow control valve. The precision positional control is obtained through pulsing of the valves under software control, with positional feedback from an 8-bit transducer. A test-rig comprising one hydraulic location pin together with an opposing spring loaded pin has demonstrated that such a pin arrangement can be controlled with a repeatability of +/-.00045'. In addition this test-rig has demonstrated that such a pin arrangement can be used to gauge and compensate for the dimensional error of the component held between the pins, by offsetting the pin datum positions to allow for the component error. A gauging repeatability of +/- 0.00015' was demonstrated. This work has led to the design and manufacture of an encapsulation die comprising ten such pins and the associated computer software. All aspects of the control software except blade gauging and positional data storage have been demonstrated. Work is now required to achieve the accuracy of control demonstrated by the single pin test-rig, with each of the ten pins in the encapsulation die. This would allow trials of the complete loading cycle to take place.

A process framework for selecting supply system architecture in manufacturing supply chains and networks

The process framework comprises three phases, as follows: scope the supply chain/network; identify the options for supply system architecture and select supply system architecture. It facilitates a structured approach that analyses the supply chain/network contextual characteristics, in order to ensure alignment with the appropriate supply system architecture. The process framework was derived from comprehensive literature review and archival case study analysis. The review led to the classification of supply system architectures according to their orientation, whether integrated; partially integrated; co-ordinated or independent. The classification was combined with the characteristics that influence the selection of supply system architecture to encapsulate the conceptual framework. It builds upon existing frameworks and methodologies by focusing on structured procedure; supporting project management; facilitating participation and clarifying point of entry. The process framework was initially tested in three case study applications from the food, automobile and hand tool industries. A variety of industrial settings was chosen to illustrate transferability. The case study applications indicate that the process framework is a valid approach to the problem; however, further testing is required. In particular, the use of group support system technologies to support the process and the steps involving the participation of software vendors need further testing. However, the process framework can be followed due to the clarity of its presentation. It considers the issue of timing by including alternative decision-making techniques, dependent on the constraints. It is useful for ensuring a sound business case is developed, with supporting documentation and analysis that identifies the strategic and functional requirements of supply system architecture.

Strategic planning as communicative process

This thesis looks at the construction of a strategic plan within a British university (Unico). After a change in leadership, the well-known strategic planning sequence was adopted to set directions according to Unico’s three Missions, followed by the development of respective goals and measures. The evolving strategic content coincided with the development of Unico’s strategic plan. I was able to follow Unico’s planning efforts over 10 months, from first planning meeting to completion of its strategic plan. The main data source provided non-participant observation (n = 25) and ten versions of Unico’s strategic plan. Additionally, seventy-six interviews were held with participants at various points. In order to examine the strategic plan’s construction, I reconceptualised strategic planning as a communicative process consisting of oral talk and written text. Through this interplay strategic planning activities come in to being. Such reconceptualisation provided a conceptual framework to study the in situ interactions without neglecting contextual characteristics embedding the communicative process. Strategic plans are currently seen as promoting inflexibility and reinforcing the institutional nature of formal strategic planning. Adopting dialogism, as advocated by Bakhtin and Ricoeur, this research provides novel insights into the dialogic of strategy talk and strategy text, such as a strategic plan. Findings illustrated that a strategic plan production cycle provided a meaning making platform for its participants. Through recurrently amending the plan, its content became increasingly specific while at the same time reflecting agreed terminology. This thesis offers an alternative view on strategic planning, elaborates on the strategy-as-practice perspective, focusing on the under-explored area of individuals’ interactions at the micro level, and elaborates on the dialogic of text and agency/conversation, distinguishing between talk and text.

A deficit in encoding the order of visual sequences in developmental dyslexia: a non -phonological deficit

The present thesis tested the hypothesis of Stanovich, Siegel, & Gottardo (1997) that surface dyslexia is the result of a milder phonological deficit than that seen in phonological dyslexia coupled with reduced reading experience. We found that a group of adults with surface dyslexia showed a phonological deficit that was commensurate with that shown by a group of adults with phonological dyslexia (matched for chronological age and verbal and non-verbal IQ) and normal reading experience. We also showed that surface dyslexia cannot be accounted for by a semantic impairment or a deficit in the verbal learning and recall of lexical-semantic information (such as meaningful words), as both dyslexic subgroups performed the same. This study has replicated the results of our published study that surface dyslexia is not the consequence of a mild retardation or reduced learning opportunities but a separate impairment linked to a deficit in written lexical learning, an ability needed to create novel lexical representations from a series of unrelated visual units, which is independent from the phonological deficit (Romani, Di Betta, Tsouknida & Olson, 2008). This thesis also provided evidence that a selective nonword reading deficit in developmental dyslexia persists beyond poor phonology. This was shown by finding a nonword reading deficit even in the presence of normal regularity effects in the dyslexics (when compared to both reading and spelling-age matched controls). A nonword reading deficit was also found in the surface dyslexics. Crucially, this deficit was as strong as in the phonological dyslexics despite better functioning of the sublexical route for the former. These results suggest that a nonword reading deficit cannot be solely explained by a phonological impairment. We, thus, suggested that nonword reading should also involve another ability relating to the processing of novel visual orthographic strings, which we called 'orthographic coding'. We then investigated the ability to process series of independent units within multi-element visual arrays and its relationship with reading and spelling problems. We identified a deficit in encoding the order of visual sequences (involving both linguistic and nonlinguistic information) which was significantly associated with word and nonword processing. More importantly, we revealed significant contributions to orthographic skills in both dyslexic and control individuals, even after age, performance IQ and phonological skills were controlled. These results suggest that spelling and reading do not only tap phonological skills but also order encoding skills.