A Log Tool for Software Systems Analyses

The article presents a new type of logs merging tool for multiple blade telecommunication systems based on the development of a new approach. The introduction of the new logs merging tool (the Log Merger) can help engineers to build a processes behavior timeline with a flexible system of information structuring used to assess the changes in the analyzed system. This logs merging system based on the experts experience and their analytical skills generates a knowledge base which could be advantageous in further decision-making expert system development. This paper proposes and discusses the design and implementation of the Log Merger, its architecture, multi-board analysis of capability and application areas. The paper also presents possible ways of further tool improvement e.g. - to extend its functionality and cover additional system platforms. The possibility to add an analysis module for further expert system development is also considered.

An intrinsic biochemical concentration sensor using a polymer optical fibre Bragg grating

A new type of fibre-optic biochemical concentration sensor based on a polymer optical fibre Bragg grating (POFBG) is proposed. The wavelength of the POFBG varies as a function of analyte concentration. The feasibility of this sensing concept is demonstrated by a saline concentration sensor. When polymer fibre is placed in a water based solution the process of osmosis takes place in this water-fibre system. An osmotic pressure which is proportional to the solution concentration, will apply to the fibre in addition to the hydraulic pressure. It tends to drive the water content out of the fibre and into the surrounding solution. When the surrounding solution concentration increases the osmotic pressure increases to drive the water content out of the fibre, consequently increasing the differential hydraulic pressure and reducing the POFBG wavelength. This process will stop once there is a balance between the osmotic pressure and the differential hydraulic pressure. Similarly when the solution concentration decreases the osmotic pressure decreases, leading to a dominant differential hydraulic pressure which drives the water into the fibre till a new pressure balance is established. Therefore the water content in the polymer fibre - and consequently the POFBG wavelength - depends directly on the solution concentration. A POFBG wavelength change of 0.9 nm was measured for saline concentration varying from 0 to 22%. For a wavelength interrogation system with a resolution of 1 pm, a measurement of solution concentration of 0.03% can be expected.

Effect of mixing sequence on the workability and performance of asphalt mixtures

In Sweden, during recent years, a new type of mixing protocol has been applied, in which the order of mixing is changed from the conventional method. Improved workability and diminished mixing and compaction energy needs have been important drivers for this. Considering that it is the mastic phase, which is modified by changing the mixing order, it provides an interesting case study for explaining the mechanisms of workability in connection with the mastic phase. To do so, an analytical viscosity framework was combined with a mixture morphology framework to upscale to the mixing level and tribology principles to explain the interaction between the mastic and the aggregates. From the mastic viscosity protocol, it was found that the mixing order significantly affects the resulting mastic viscosity. To analyse the effect of this on the workability and resulting mixture performance, X-ray computed tomography was used to analyse mixtures produced by the two different mixing sequences. Mechanical testing was utilised to determine the long-term mechanical performance. In this part of the study, mastic viscosity as a function of particle concentration and distribution was directly coupled to improved mixture workability and enhanced long-term performance.

University-led innovative and inspirational engineering education

The UK Government and large employers have recognised the skills gap between learners leaving the education system and the requirements of employers. The current system is seen to be failing significant numbers of learners and has been accused of schooling but not educating our young people. University-led technical colleges are one part of the solution being developed to provide outstanding engineering education. This paper focusses on the learning experience that the Aston University Engineering Academy, the first University-led University Technical College (UTC), has created for entrants to the Engineering Academy in September 2012, when it opens in brand new buildings next to the University. The overall aim is to produce technically literate young people that have business and enterprise skills as well as insight into the diverse range of opportunities in Engineering and Technical disciplines. The project has brought University staff and students together with employers and Academy staff to optimise the engineering education that they will receive. The innovative model presented has drawn on research from across the world in the implementation of this new type of school, as well as educational practices from the USA and the Scandinavian countries. The resulting curriculum is authentic and exciting and expands the University model of problem-based learning and placements into the secondary school environment. The benefits of this close partnership for University staff and students, the employers and the Academy staff are expanded on and the paper concludes with a prediction of progression routes from the Academy.

Vector solitons with slowly evolving states of polarisation

We demonstrate experimentally and study theoretically new type of stable pulse structures in erbium-doped fibre lasers - slowly polarisation evolving vector solitons. Demonstrated vector solitons precess with characteristic times of 100-1000 round trips and their trajectories form a double semicircle on the Poincaré sphere. © 2012 Optical Society of America.

UV inscribed long period gratings with femtosecond ablated axial fibre slots for polarization control

We present data on the development a new type of optical fibre polariser and the characterisation of its wavelength properties. The device is fashioned using a two step process. Firstly, a standard UV long period grating (LPG) with a period of 330μm is inscribed into hydrogenated SMF-28, followed by femtosecond laser ablation of a groove parallel to the fibre axis. The UV inscribed LPGs have inherently low birefringence. However, the removal of the cladding layer parallel to the location of the LPG within the fibre core (as a result the ablation) modifies the cladding modes that couple with the LPG. Furthermore, the groove breaks the fibre symmetry introducing a non-uniform stress profile across the fibre cross section leading to significant birefringence. We show that increasing the depth of the groove increases the birefringence, and this behaviour coupled with the ability to control the wavelength location of the LPGs attenuations peaks results in a polariser able to operate at almost any wavelength and birefringence. The maximum birefringence reported here as polarisation mode splitting was approximately 39±0.1nm with a polarisation loss of 10dB. © 2011 Copyright Society of Photo-Optical Instrumentation Engineers (SPIE).

Dynamic variability in adaptive systems

One of the reasons for using variability in the software product line (SPL) approach (see Apel et al., 2006; Figueiredo et al., 2008; Kastner et al., 2007; Mezini & Ostermann, 2004) is to delay a design decision (Svahnberg et al., 2005). Instead of deciding on what system to develop in advance, with the SPL approach a set of components and a reference architecture are specified and implemented (during domain engineering, see Czarnecki & Eisenecker, 2000) out of which individual systems are composed at a later stage (during application engineering, see Czarnecki & Eisenecker, 2000). By postponing the design decisions in such a manner, it is possible to better fit the resultant system in its intended environment, for instance, to allow selection of the system interaction mode to be made after the customers have purchased particular hardware, such as a PDA vs. a laptop. Such variability is expressed through variation points which are locations in a software-based system where choices are available for defining a specific instance of a system (Svahnberg et al., 2005). Until recently it had sufficed to postpone committing to a specific system instance till before the system runtime. However, in the recent years the use and expectations of software systems in human society has undergone significant changes.Today's software systems need to be always available, highly interactive, and able to continuously adapt according to the varying environment conditions, user characteristics and characteristics of other systems that interact with them. Such systems, called adaptive systems, are expected to be long-lived and able to undertake adaptations with little or no human intervention (Cheng et al., 2009). Therefore, the variability now needs to be present also at system runtime, which leads to the emergence of a new type of system: adaptive systems with dynamic variability.

Random distributed feedback fiber laser

Researchers conducted investigations to demonstrate the advantages of random distributed feedback fiber laser. Random lasers had advantages, such as simple technology that did not require a precise microcavity and low production cost. The properties of their output radiation were special in comparison to those of conventional lasers and they were characterized by complex features in the spatial, spectral, and time domains. The researchers demonstrated a new type of one-dimensional laser with random distributed feedback based on Rayleigh scattering (RS) that was presented in any transparent glass medium due to natural inhomogeneities of refractive index. The cylindrical fiber waveguide geometry provided transverse confinement, while the cavity was open in the longitudinal direction and did not include any regular point-action reflectors.

In-cavity pulse shaping and dissipative parametric instability mode-locking in fibre lasers

At the level of fundamental research, fibre lasers provide convenient and reproducible experimental settings for the study of a variety of nonlinear dynamical processes, while at the applied research level, pulses with different and optimised features – e.g., in terms of pulse duration, temporal and/or spectral shape, energy, repetition rate and emission bandwidth – are sought with the general constraint of developing efficient cavity architectures. In this work, we review our recent progress on the realisation of pulse shaping in passively- mode-locked fibre lasers by inclusion of an amplitude and phase spectral filter into the laser cavity. We present a fibre laser design in which pulse shaping occurs through filtering of a spectrally nonlinearly broadened pulse in the cavity. This strategy of pulse shaping is illustrated through the numerical demonstration of the laser operation in different pulse-generation regimes, including parabolic, flattop and triangular waveform generations, depending on the amplitude profile of the in-cavity spectral filter [1]. As an application of this general approach, we show that the use of an in-cavity flat-top spectral filter makes it possible to directly generate sinc-shaped Nyquist pulses of high quality and of a widely tunable bandwidth from the laser [2]. We also report on a recently-developed versatile erbium-doped fibre laser, in which conventional soliton, dispersion-managed soliton (stretched-pulse) and dissipative soliton mode-locking regimes can be selectively and reliably targeted by programming different group-velocity dispersion profiles and bandwidths on an in-cavity programmable filter [3]. Further, we report on our recent results on the passive mode locking of a Raman fibre laser by a recently predicted new type of parametric instability – the dissipative Faraday instability [4], where spatially periodic zig-zag modulation of spectrally dependent losses can lead to pattern formation in the temporal domain. High-order harmonic mode locking is achieved in a very simple experimental configuration, with the laser cavity including an optical fibre and two chirped fibre Bragg gratings, and no additional mode-locking elements. The results not only open up new possibilities for the design of mode-locked lasers, but extend beyond fibre optics to other fields of physics and engineering. References [1] S. Boscolo, C. Finot, H. Karakuzu, P. Petropoulos, “Pulse shaping in mode-locked fiber laser by in-cavity spectral filter,” Opt. Lett., vol. 39, pp. 438–441, 2014. [2] S. Boscolo, C. Finot, S. K. Turitsyn, “Bandwidth programmable optical Nyquist pulse generation in passively mode-locked fiber laser,” IEEE Photon. J., vol. 7, 7802008(8), 2015. [3] J. Peng, S. Boscolo, “Filter-based dispersion-managed versatile ultrafast fibre laser,” Sci. Rep., 2016, In press. [4] A. M. Perego, N. Tarasov, D. V. Churkin, S. K. Turitsyn, K. Staliunas, “Pattern generation by dissipative parametric instability,” Phys. Rev. Lett., vol. 116, 028701, 2016.

Temporal and spatio-temporal regimes of generation of Raman fibre lasers

Temporal dynamics of Raman fibre lasers tend to have very complex nature, owing to great cavity lengths and high nonlinearity, being stochastic on short time scales and quasi-continuous on longer time scales. Generally fibre laser intensity dynamics is represented by one-dimensional time-series, which in case of quasi-continuous wave generation in Raman fibre lasers gives little insight into the processes underlying the operation of a laser. New methods of analysis and data representation could help to uncover the underlying physical processes, understand the dynamics or improve the performance of the system. Using intrinsic periodicity of laser radiation, one dimensional intensity time series of a Raman fibre laser was analysed over fast and slow variation time. This allowed to experimentally observe various spatio-temporal regimes of generation, such as laminar, turbulent, partial mode-lock, as well as transitions between them and identify the mechanisms responsible for the transitions. Great cavity length and high nonlinearity also make it difficult to achieve stable high repetition rate mode-locking in Raman fibre lasers. Using Faraday parametric instability in extremely simple linear cavity experimental configuration, a very high order harmonic mode-locking was achieved in ò.ò kmlong Raman fibre laser. The maximum achieved pulse repetition rate was 12 GHz, with 7.3 ps long Gaussian shaped pulses. There is a new type of random lasers – random distributed feedback Raman fibre laser, which temporal properties cannot be controlled by conventionalmode-locking or Q-switch techniques and mechanisms. By adjusting the pump configuration, a very stable pulsed operation of random distributed feedback Raman fibre laser was achieved. Pulse duration varied in the range from 50 to 200 μs depending on the pump power and the cavity length. Pulse repetition rate scaling on the parameters of the system was experimentally identified.

Adatbányászati alkalmazások lehetőségei egy multinacionális vállalat magyarországi leányvállalatának információs rendszerében (Opportunities of datamining applications in the information system of a multinational company’s Hungarian subsidiary)

A tanulmány Magyarország egyik legnagyobb foglalkoztatójának megrendelésére készült abból a célból, hogy milyen megoldásokkal lehetne a vállalati működést hatékonyabbá tenni. Ennek keretében a szerzők megvizsgálták, hol tart ma a HR adatbányászati kutatás a világban. Milyen eszközök állnak rendelkezésre ahhoz, hogy a munkavállalói elmenetelt előre jelezzék, illetve figyeljék, valamint milyen lehetőség van a hálózati kutatások felhasználására a biztonság területén. Szerencsés, hogy a vállalkozói kérdések és erőforrások találkozhattak a kutatói szféra aktuális kutatási területeivel. A tanulmány szerzői úgy gondolják, hogy a cikkben megfogalmazott állítások, következtetések, eredmények a jövőben hasznosíthatók lesznek a vállalat és más cégek számára is. _____ The authors were pleased to take part in this research project initiated by one of Hungary’s largest employer. The goal of the project was to work out BI solutions to improve upon their business process. In the framework of the project first the authors made a survey on the current trends in the world of HR datamining. They reviewed the available tools for the prediction of employee promotion and investigated the question on how to utilize results achieved in social network analysis in the field of enterprise security. When real business problems and resources meet the mainstream research of the scientific community it is always a fortunate and it is rather fruitful. The authors are certain that the results published in this document will be beneficial for Foxconn in the near future. Of course, they are not done. There are continually new research perspectives opening up and huge amount of information is accumulating in the enterprises just waiting for getting discovered and analysed. Also the environment in which an enterprise operates is dynamically changing and thus the company faces new challenges and new type of business problems arise. The authors are in the hope that their research experience will help decision makers also in the future to solve real world business problems.

EU-s források a vállalkozások tőkeellátottságának javítására - A JEREMIE Kockázati Tőkeprogram (EU funds to improve the capitalization of the companies – JEREMIE Venture Capital Program)

A hazai kis- és középvállalkozások (kkv-k) tőkeellátottságának javítása meghatározó szerepet játszik fejlődésük előmozdításában. Jelen tanulmány az Új Széchenyi Terv (ÚSZT) keretében a vállalkozások rendelkezésére álló pénzügyi eszközök közül a kockázati tőke működését mutatja be. A fejlődésük növekedési ciklusában járó cégek mellett a korai életszakaszukban járó, innovatív tevékenységet folytató, gyors növekedésre képes, de forráshiányos vállalkozások finanszírozásában nyújthat segítséget Magyarországon a 2010-ben elindult JEREMIE Kockázati Tőkeprogram. Az állami és a privát tulajdonban levő piaci szereplők hazánkban újnak mondható együttműködése révén megvalósuló program a magyar kockázatitőke-piac kínálati oldalának bővítését szolgálja, abban az alsó (döntően az 1-1,5 millió EUR/tranzakció alatti) szegmensben, ahol a tisztán piaci alapon működő befektetők korlátozottabb szerepvállalása figyelhető meg, és így a piacon hiány jelentkezik. Az EU-s támogatások ezen új típusú felhasználási formája színesíti és kibővíti a vállalkozások számára elérhető pénzügyi eszközök körét és volumenét, fokozottabb mértékben érvényesül a piaci szemlélet, hiszen verseny van a forrásokért, és verseny van a források kihelyezését végző pénzügyi közvetítő szervezetek között is, mindezek mellett további magánforrások bevonását biztosítja, ösztönzőleg hat a cégek működésére, és a visszaforgó rendszer biztosítja a fenntarthatóságot, a források későbbi újbóli felhasználását is. _______ To improve the capitalization of the domestic small and medium-sized enterprises (SMEs) has a decisive role in promoting development. This study presents the operation of venture capital from the available business financial instruments of the New Széchenyi Plan. In Hungary the JEREMIE Venture Capital Program, which launched in 2010, can help in financing of the rapidly growth, innovative, early life stage companies besides the development cycle of growth companies. This program with new cooperation between the stateowned and private companies enlarge the supply-side of the Hungarian venture capital market, at that the bottom (mostly in the 1 to 1.5 million EUR / transaction below) segment, where can be observed the limited role of the purely market-based investors, and thus there is a shortage in the market. These new type application form of the EU supports enriches and expands the scope and volume of the available financial instruments for the enterprises, the market orientation prevails more broadly, because there is a competition for resources and there is a competition between the resources allocation financial intermediaries,in addition ensures further private resources.

The multiple dimensions of political trust in democratic Argentina

Why do Argentines continue to support democracy despite distrusting political institutions and politicians? Support for democracy is high even though performance of the regime is poor. One would suspect that poor economic and political performance would open the door for military intervention given the history of Argentina. What changed? What explains variance across the multiple dimensions of political trust, such as trust in the regime, trust in political institutions, and trust in politicians? This dissertation is a case study of political culture through public opinion exploring the multiple dimensions of political trust in Argentina during the 1990s. ^ Variance across the different dimensions of political trust may be an indicator of the rise of a new type of citizens called "critical citizens." Critical citizens are citizens who criticize the regime to obtain democratic reforms but support the ideals of democracy. In established democracies, the rise of critical citizens is explained by a shift in individuals' value priorities towards postmaterialism. Postmaterialism is a cultural change in the direction of values that emphasize self-realization and individual well-being. Postmaterialism influences various social and political attitudes. ^ Because Argentina is experiencing a cultural change and a rise of critical citizens similar to more advanced societies, the theory of postmaterialism generated the main hypothesis to explain the multiple dimensions of political trust. This dissertation also tested an alternative explanation: the multiple dimensions of political trust responded instead to citizens' evaluations of performance. Ultimately, postmaterialism explained trust in the political regime and trust in the political institutions. Contrary to expectations, postmaterialism did not explain trust in the political elites or politicians. Trust in politicians was better explained by the alternative hypothesis, performance. ^ The main method of research was the statistical method supplemented with the comparative method when data were available. Two main databases were used: the World Values Surveys and the Latinobarometer. ^

The impact of information technology on organizations: A study of enterprise resource planning system influences on job design and organizational culture

The primary purpose of this research is to study the linkage between perceived job design characteristics and information system environment characteristics before and after the replacement of a legacy information system with a new type of information system (referred to as an Enterprise Resource Planning or ERP system). A public state University implementing an academic version of an ERP system was selected for the study. Three survey instruments were used to examine the perception of the information system, the job characteristics, and the organizational culture before and after the system implementation. The research participants included two large departments resulting in a sample of 130 workers. Research questions were analyzed using multivariate procedures including factor analysis, path analysis, step-wise regression, and matched pair analysis. ^ Results indicated that the ERP system has introduced new elements into the working environment that has changed the perception of how the job design characteristics and organization culture dimensions are viewed by the workers. The understanding of how the perceived system characteristics align with an individual's perceived job design characteristics is supported by each of the system characteristics significantly correlated in the proposed direction. The stronger support of this relationship becomes visible in the causal flow of the effects seen in the path diagram and in the step-wise regression. The perceived job design characteristics aligning with dimensions of organizational culture are not as strong as the literature suggests. Although there are significant correlations between the job and culture variables, only one relationship can be seen in the causal flow. ^ This research has demonstrated that system characteristics of ERP do contribute to the perception of change in an organization and do support organizational culture behaviors and job characteristics. ^

La caída del hombre nuevo: Narrativa cubana del “Período Especial”

The purpose of this dissertation is to demonstrate that the societal changes that took place in Cuba during the last decade of the twentieth century, period know as The Special Period in Times of Peace, created the necessary conditions for the development of a new type of narrative. The first chapter constitutes an historical overview of the role of the State in the literary and artistic creation in revolutionary Cuba. The second, third, and fourth chapters analyze the major characteristics in the narrative of this period, creating a contrast with previous decades of the revolutionary era. With such purpose the study is divided into three categories: language, themes, and ideology. The usage of language as a means of transgression, the recurrence of the topic of need, and the rebirth of critical thinking, represent the principal characteristics of this literary period, and confirm the main idea of this dissertation: the fall of the ideal of the New Man. The final chapter summarizes the findings of the study and poses a question: If the ideal of the New Man has ceased to exist, what has replaced it? The question of whether or not a new ideal has replaced that of the New Man, and what that ideal might be, constitutes a stepping-stone for further studies in the area of Cuban narrative of the Special Period and beyond.