Intravenous injection of leconotide, an omega conotoxin : synergistic antihyperalgesic effects with morphine in a rat model of bone cancer pain

Objective.  Leconotide (CVID, AM336, CNSB004) is an omega conopeptide similar to ziconotide, which blocks voltage sensitive calcium channels. However, unlike ziconotide, which must be administered intrathecally, leconotide can be given intravenously because it is less toxic. This study investigated the antihyperalgesic potency of leconotide given intravenously alone and in combinations with morphine-administered intraperitoneally, in a rat model of bone cancer pain. Design.  Syngeneic rat prostate cancer cells AT3B-1 were injected into one tibia of male Wistar rats. The tumor expanded within the bone causing hyperalgesia to heat applied to the ipsilateral hind paw. Measurements were made of the maximum dose (MD) of morphine and leconotide given alone and in combinations that caused no effect in an open-field activity monitor, rotarod, and blood pressure and heart rate measurements. Paw withdrawal thresholds from noxious heat were measured. Dose response curves for morphine (0.312–5.0 mg/kg intraperitoneal) and leconotide (0.002–200 µg/kg intravenous) given alone were plotted and responses compared with those caused by morphine and leconotide in combinations. Results.  Leconotide caused minimal antihyperalgesic effects when administered alone. Morphine given alone intraperitoneally caused dose-related antihyperalgesic effects (ED50 = 2.40 ± 1.24 mg/kg), which were increased by coadministration of leconotide 20 µg/kg (morphine ED50 = 0.16 ± 1.30 mg/kg); 0.2 µg/kg (morphine ED50 = 0.39 ± 1.27 mg/kg); and 0.02 µg/kg (morphine ED50 = 1.24 ± 1.30 mg/kg). Conclusions.  Leconotide caused a significant increase in reversal by morphine of the bone cancer-induced hyperalgesia without increasing the side effect profile of either drug. Clinical Implication.  Translation into clinical practice of the method of analgesia described here will improve the quantity and quality of analgesia in patients with bone metastases. The use of an ordinary parenteral route for administration of the calcium channel blocker (leconotide) at low dose opens up the technique to large numbers of patients who could not have an intrathecal catheter for drug administration. Furthermore, the potentiating synergistic effect with morphine on hyperalgesia without increased side effects will lead to greater analgesia with improved quality of life.

Brief interventions to reduce ecstasy use : a multi-site randomized controlled trial

Studies examining the ability of motivational enhancement therapy (MET) to augment education provision among ecstasy users have produced mixed results and none have examined whether treatment fidelity was related to ecstasy use outcomes. The primary objectives of this multi-site, parallel, two-group randomized controlled trial were to determine if a single-session of MET could instill greater commitment to change and reduce ecstasy use and related problems more so than an education-only intervention and whether MET sessions delivered with higher treatment fidelity are associated with better outcomes. The secondary objective was to assess participants’ satisfaction with their assigned interventions. Participants (N = 174; Mage = 23.62) at two Australian universities were allocated randomly to receive a 15-minute educational session on ecstasy use (n = 85) or a 50-minute session of MET that included an educational component (n = 89). Primary outcomes were assessed at baseline, and then at 4-, 16-, and 24-weeks post-baseline, while the secondary outcome measure was assessed 4-weeks post-baseline by researchers blind to treatment allocation. Overall, the treatment fidelity was acceptable to good in the MET condition. There were no statistical differences at follow-up between the groups on the primary outcomes of ecstasy use, ecstasy-related problems, and commitment to change. Both interventions groups reported a 50% reduction in their ecstasy use and a 20% reduction in the severity of their ecstasy-related problems at the 24-week follow up. Commitment to change slightly improved for both groups (9% - 17%). Despite the lack of between-group statistical differences on primary outcomes, participants who received a single session of MET were slightly more satisfied with their intervention than those who received education only. MI fidelity was not associated with ecstasy use outcomes. Given these findings, future research should focus on examining mechanisms of change. Such work may suggest new methods for enhancing outcomes.

An efficient and robust system for multi-person event detection in real world indoor surveillance scenes

Due to the popularity of security cameras in public places, it is of interest to design an intelligent system that can efficiently detect events automatically. This paper proposes a novel algorithm for multi-person event detection. To ensure greater than real-time performance, features are extracted directly from compressed MPEG video. A novel histogram-based feature descriptor that captures the angles between extracted particle trajectories is proposed, which allows us to capture motion patterns of multi-person events in the video. To alleviate the need for fine-grained annotation, we propose the use of Labelled Latent Dirichlet Allocation, a “weakly supervised” method that allows the use of coarse temporal annotations which are much simpler to obtain. This novel system is able to run at approximately ten times real-time, while preserving state-of-theart detection performance for multi-person events on a 100-hour real-world surveillance dataset (TRECVid SED).

Writing embodied practice from the inside : outside the exegesis

The textual turn is a good friend of expert spectating, where it assumes the role of writing-productive apparatus, but no friend at all of expert practices or practitioners (Melrose, 2003). Introduction The challenge of time-based embodied performance when the artefact is unstable As a former full-time professional practitioner with an embodied dance practice as performer, choreographer and artistic director for three decades, I somewhat unexpectedly entered the world of academia in 2000 after completing a practice-based PhD, which was described by its examiners as ‘pioneering’. Like many artists my intention was to deepen and extend my practice through formal research into my work and its context (which was intercultural) and to privilege the artist’s voice in a research world where it was too often silent. Practice as research, practice-based research, and practice-led research were not yet fully named. It was in its infancy and my biggest challenge was to find a serviceable methodology which did not betray my intentions to keep practice at the centre of the research. Over the last 15 years, practice led doctoral research, where examinable creative work is placed alongside an accompanying (exegetical) written component, has come a long way. It has been extensively debated with a range of theories and models proposed (Barrett & Bolt, 2007, Pakes, 2003 & 2004, Piccini, 2005, Philips, Stock & Vincs 2009, Stock, 2009 & 2010, Riley & Hunter 2009, Haseman, 2006, Hecq, 2012). Much of this writing is based around epistemological concerns where the research methodologies proposed normally incorporate a contextualisation of the creative work in its field of practice, and more importantly validation and interrogation of the processes of the practice as the central ‘data gathering’ method. It is now widely accepted, at least in the Australian creative arts context, that knowledge claims in creative practice research arise from the material activities of the practice itself (Carter, 2004). The creative work explicated as the tangible outcome of that practice is sometimes referred to as the ‘artefact’. Although the making of the artefact, according to Colbert (2009, p. 7) is influenced by “personal, experiential and iterative processes”, mapping them through a research pathway is “difficult to predict [for] “the adjustments made to the artefact in the light of emerging knowledge and insights cannot be foreshadowed”. Linking the process and the practice outcome most often occurs through the textual intervention of an exegesis which builds, and/or builds on, theoretical concerns arising in and from the work. This linking produces what Barrett (2007) refers to as “situated knowledge… that operates in relation to established knowledge” (p. 145). But what if those material forms or ‘artefacts’ are not objects or code or digitised forms, but live within the bodies of artist/researchers where the nature of the practice itself is live, ephemeral and constantly transforming, as in dance and physical performance? Even more unsettling is when the ‘artefact’ is literally embedded and embodied in the work and in the maker/researcher; when subject and object are merged. To complicate matters, the performing arts are necessarily collaborative, relying not only on technical mastery and creative/interpretive processes, but on social and artistic relationships which collectively make up the ‘artefact’. This chapter explores issues surrounding live dance and physical performance when placed in a research setting, specifically the complexities of being required to translate embodied dance findings into textual form. Exploring how embodied knowledge can be shared in a research context for those with no experiential knowledge of communicating through and in dance, I draw on theories of “dance enaction” (Warburton, 2011) together with notions of “affective intensities” and “performance mastery” (Melrose, 2003), “intentional activity” (Pakes, 2004) and the place of memory. In seeking ways to capture in another form the knowledge residing in live dance practice, thus making implicit knowledge explicit, I further propose there is a process of triple translation as the performance (the living ‘artefact’) is documented in multi-facetted ways to produce something durable which can be re-visited. This translation becomes more complex if the embodied knowledge resides in culturally specific practices, formed by world views and processes quite different from accepted norms and conventions (even radical ones) of international doctoral research inquiry. But whatever the combination of cultural, virtual and genre-related dance practices being researched, embodiment is central to the process, outcome and findings, and the question remains of how we will use text and what forms that text might take.

Supervisor conflict management, justice and strain : multi-level relationships

Purpose The purpose of this paper is to test a multilevel model of the main and mediating effects of supervisor conflict management style (SCMS) climate and procedural justice (PJ) climate on employee strain. It is hypothesized that workgroup-level climate induced by SCMS can fall into four types: collaborative climate, yielding climate, forcing climate, or avoiding climate; that these group-level perceptions will have differential effects on employee strain, and will be mediated by PJ climate. Design/methodology/approach Multilevel SEM was used to analyze data from 420 employees nested in 61 workgroups. Findings Workgroups that perceived high supervisor collaborating climate reported lower sleep disturbance, job dissatisfaction, and action-taking cognitions. Workgroups that perceived high supervisor yielding climate and high supervisor forcing climate reported higher anxiety/depression, sleep disturbance, job dissatisfaction, and action-taking cognitions. Results supported a PJ climate mediation model when supervisors’ behavior was reported to be collaborative and yielding. Research limitations/implications The cross-sectional research design places limitations on conclusions about causality; thus, longitudinal studies are recommended. Practical implications Supervisor behavior in response to conflict may have far-reaching effects beyond those who are a party to the conflict. The more visible use of supervisor collaborative CMS may be beneficial. Social implications The economic costs associated with workplace conflict may be reduced through the application of these findings. Originality/value By applying multilevel theory and analysis, we extend workplace conflict theory.

Multi-ciphersuite security of the Secure Shell (SSH) protocol

The Secure Shell (SSH) protocol is widely used to provide secure remote access to servers, making it among the most important security protocols on the Internet. We show that the signed-Diffie--Hellman SSH ciphersuites of the SSH protocol are secure: each is a secure authenticated and confidential channel establishment (ACCE) protocol, the same security definition now used to describe the security of Transport Layer Security (TLS) ciphersuites. While the ACCE definition suffices to describe the security of individual ciphersuites, it does not cover the case where parties use the same long-term key with many different ciphersuites: it is common in practice for the server to use the same signing key with both finite field and elliptic curve Diffie--Hellman, for example. While TLS is vulnerable to attack in this case, we show that SSH is secure even when the same signing key is used across multiple ciphersuites. We introduce a new generic multi-ciphersuite composition framework to achieve this result in a black-box way.

Corneal confocal microscopy shown an improvement in small-fibre neuropathy in subjects with type 1 diabetes on continuous subcutaneous insulin infusion compared to multiple daily injection

Improved glycemic control is the only treatment that has been shown to be effective for diabetic peripheral neuropathy in patients with type 1 diabetes (1). Continuous subcutaneous insulin infusion (CSII) is superior to multiple daily insulin injection (MDI) for reducing HbA1c and hypoglycemic events (2). Here, we have compared the benefits of CSII compared withMDI for neuropathy over 24months....

Easy data, hard data : the politics and pragmatics of Twitter research after the computational turn

In this chapter, we draw out the relevant themes from a range of critical scholarship from the small body of digital media and software studies work that has focused on the politics of Twitter data and the sociotechnical means by which access is regulated. We highlight in particular the contested relationships between social media research (in both academic and non-academic contexts) and the data wholesale, retail, and analytics industries that feed on them. In the second major section of the chapter we discuss in detail the pragmatic edge of these politics in terms of what kinds of scientific research is and is not possible in the current political economy of Twitter data access. Finally, at the end of the chapter we return to the much broader implications of these issues for the politics of knowledge, demonstrating how the apparently microscopic level of how the Twitter API mediates access to Twitter data actually inscribes and influences the macro level of the global political economy of science itself, through re-inscribing institutional and traditional disciplinary privilege We conclude with some speculations about future developments in data rights and data philanthropy that may at least mitigate some of these negative impacts.

Combustion analysis of microalgae methyl ester in a common rail direct injection diesel engine

In this study, the biodiesel properties and effects of blends of oil methyl ester petroleum diesel on a CI direct injection diesel engine is investigated. Blends were obtained from the marine dinoflagellate Crypthecodinium cohnii and waste cooking oil. The experiment was conducted using a four-cylinder, turbo-charged common rail direct injection diesel engine at four loads (25%, 50%, 75% and 100%). Three blends (10%, 20% and 50%) of microalgae oil methyl ester and a 20% blend of waste cooking oil methyl ester were compared to petroleum diesel. To establish suitability of the fuels for a CI engine, the effects of the three microalgae fuel blends at different engine loads were assessed by measuring engine performance, i.e. mean effective pressure (IMEP), brake mean effective pressure (BMEP), in cylinder pressure, maximum pressure rise rate, brake-specific fuel consumption (BSFC), brake thermal efficiency (BTE), heat release rate and gaseous emissions (NO, NOx,and unburned hydrocarbons (UHC)). Results were then compared to engine performance characteristics for operation with a 20% waste cooking oil/petroleum diesel blend and petroleum diesel. In addition, physical and chemical properties of the fuels were measured. Use of microalgae methyl ester reduced the instantaneous cylinder pressure and engine output torque, when compared to that of petroleum diesel, by a maximum of 4.5% at 50% blend at full throttle. The lower calorific value of the microalgae oil methyl ester blends increased the BSFC, which ultimately reduced the BTE by up to 4% at higher loads. Minor reductions of IMEP and BMEP were recorded for both the microalgae and the waste cooking oil methyl ester blends at low loads, with a maximum of 7% reduction at 75% load compared to petroleum diesel. Furthermore, compared to petroleum diesel, gaseous emissions of NO and NOx, increased for operations with biodiesel blends. At full load, NO and NOx emissions increased by 22% when 50% microalgae blends were used. Petroleum diesel and a 20% blend of waste cooking oil methyl ester had emissions of UHC that were similar, but those of microalgae oil methyl ester/petroleum diesel blends were reduced by at least 50% for all blends and engine conditions. The tested microalgae methyl esters contain some long-chain, polyunsaturated fatty acid methyl esters (FAMEs) (C22:5 and C22:6) not commonly found in terrestrial-crop-derived biodiesels yet all fuel properties were satisfied or were very close to the ASTM 6751-12 and EN14214 standards. Therefore, Crypthecodinium cohnii- derived microalgae biodiesel/petroleum blends of up to 50% are projected to meet all fuel property standards and, engine performance and emission results from this study clearly show its suitability for regular use in diesel engines.

Porous versus porthole fuel injection in a radical farming scramjet: A numerical analysis

Numerically computed engine performance of a nominally two-dimensional radical farming scramjet with porous (permeable C/C ceramic) and porthole fuel injection is presented. Inflow conditions with Mach number, stagnation pressure, and enthalpy of 6.44, 40.2MPa, and 4.31 MJ/kg respectively, and fuel/air equivalence ratio of 0.44 were maintained, along with engine geometry. Hydrogen fuel was injected at an axial location of 92.33mm downstream of the leading edge for each investigated injection method. Results from this study show that porous fuel injection results in enhanced mixing and combustion compared to porthole fuel injection. This is particularly evident within the first half of the combustion chamber where porous fuel injection resulted in mixing and combustion efficiencies of 76% and 63% respectively. At the same location, porthole fuel injection resulted in efficiencies respectively of 58% and 46%. Key mechanisms contributing to the observed improved performance were the formation of an attached oblique fuel injection shock and associated stronger shock-expansion train ingested by the engine, enhanced spreading of the fuel in all directions and a more rapidly growing mixing layer.

Porous fuel injection with oxygen enrichment in a viable scramjet engine

Oxygen enriched, porous fuel injection has been numerically investigated in this study with the aim of understanding mixing and combustion enhancements achievable in a viable scramjet engine. Four injection configurations were studied: a fuel only case, a pre-mixed case and two staged injection cases where fuel and oxidiser were injected independently. All simulations were performed on a flight scale vehicle at Mach 8 flow conditions. Results show that the addition of oxygen with the fuel increases the mixing efficiency of the engine, however, is less sensitive to the method of oxygen addition: premixed versus staged. When the fuel-oxidiser-air mixture was allowed to combust, the method of additional oxygen delivery had a more significant impact. For pre-mixed fuel and oxidiser, the engine was found to choke, whereas in contrast, in the staged enrichment cases the engine failed to ignite. This result indicates that there exists an optimised configuration between pre-mixed and staged oxygen enrichment which results in a started, and combusting engine.

Multi-agent systems for modeling high penetration photovoltaic system impacts in distribution networks

This paper reviews the use of multi-agent systems to model the impacts of high levels of photovoltaic (PV) system penetration in distribution networks and presents some preliminary data obtained from the Perth Solar City high penetration PV trial. The Perth Solar City trial consists of a low voltage distribution feeder supplying 75 customers where 29 consumers have roof top photovoltaic systems. Data is collected from smart meters at each consumer premises, from data loggers at the transformer low voltage (LV) side and from a nearby distribution network SCADA measurement point on the high voltage side (HV) side of the transformer. The data will be used to progressively develop MAS models.

Transformerless PV inverters - recent test results and a discussion of DC current injection and safety issues

With the variety of PV inverter types and the number of transformerless PV inverters on the Australian market increasing, we revisit some of the issues associated with these topologies. A recent electric shock incident in Queensland (luckily without serious outcome) associated with a transformerless PV system, highlights the need for earthing PV array structures and PV module frames to prevent capacitive leakage currents causing electric shock. The presented test results of the relevant voltages associated with leakage currents of five transformerless PV inverters stress this requirement, which is currently being addressed by both the Clean Energy Council and Standards Australia. DC current injection tests were performed on the same five inverters and were used to develop preliminary recommendations for a more meaningful DC current test procedure for AS4777 Part 2. The test circuit, methodology and results are presented and discussed. A notable temperature dependency of DC current injections with three of the five inverters suggests that DC current injection should be tested at high and low internal inverter temperatures whereas the power dependency noted only for one inverter does not seem to justify recommendations for a (rather involved) standard test procedure at different power levels.

Robust clustering of multi-type relational data via a heterogeneous manifold ensemble

High-Order Co-Clustering (HOCC) methods have attracted high attention in recent years because of their ability to cluster multiple types of objects simultaneously using all available information. During the clustering process, HOCC methods exploit object co-occurrence information, i.e., inter-type relationships amongst different types of objects as well as object affinity information, i.e., intra-type relationships amongst the same types of objects. However, it is difficult to learn accurate intra-type relationships in the presence of noise and outliers. Existing HOCC methods consider the p nearest neighbours based on Euclidean distance for the intra-type relationships, which leads to incomplete and inaccurate intra-type relationships. In this paper, we propose a novel HOCC method that incorporates multiple subspace learning with a heterogeneous manifold ensemble to learn complete and accurate intra-type relationships. Multiple subspace learning reconstructs the similarity between any pair of objects that belong to the same subspace. The heterogeneous manifold ensemble is created based on two-types of intra-type relationships learnt using p-nearest-neighbour graph and multiple subspaces learning. Moreover, in order to make sure the robustness of clustering process, we introduce a sparse error matrix into matrix decomposition and develop a novel iterative algorithm. Empirical experiments show that the proposed method achieves improved results over the state-of-art HOCC methods for FScore and NMI.

Injection velocity control of thermoplastic injection molding via a double controller scheme

Injection velocity has been recognized as a key variable in thermoplastic injection molding. Its closed-loop control is, however, difficult due to the complexity of the process dynamic characteristics. The basic requirements of the control system include tracking of a pre-determined injection velocity curve defined in a profile, load rejection and robustness. It is difficult for a conventional control scheme to meet all these requirements. Injection velocity dynamics are first analyzed in this paper. Then a novel double-controller scheme is adopted for the injection velocity control. This scheme allows an independent design of set-point tracking and load rejection and has good system robustness. The implementation of the double-controller scheme for injection velocity control is discussed. Special techniques such as profile transformation and shifting are also introduced to improve the velocity responses. The proposed velocity control has been experimentally demonstrated to be effective for a wide range of processing conditions.