Analysis of surface integrity for minimum quantity lubricant - MQL in grinding

The quality of machined components is currently of high interest, for the market demands mechanical components of increasingly high performance, not only from the standpoint of functionality but also from that of safety. Components produced through operations involving the removal of material display surface irregularities resulting not only from the action of the tool itself, but also from other factors that contribute to their superficial texture. This texture can exert a decisive influence on the application and performance of the machined component. This article analyzes the behavior of the minimum quantity lubricant (MQL) technique and compares it with the conventional cooling method. To this end, an optimized fluid application method was devised using a specially designed nozzle, by the authors, through which a minimum amount of oil is sprayed in a compressed air flow, thus meeting environmental requirements. This paper, therefore, explores and discusses the concept of the MQL in the grinding process. The performance of the MQL technique in the grinding process was evaluated based on an analysis of the surface integrity (roughness, residual stress, microstructure and microhardness). The results presented here are expected to lead to technological and ecological gains in the grinding process using MQL. (c) 2006 Elsevier Ltd. All rights reserved.

Considerations about the welding repair effects on the structural integrity of an airframe critical to the flight-safety

Structures critical to the flight-safety are commonly submitted to several maintenance repairs at the welded joints in order to prolong the in-service life of aircrafts. The aim of this study is to analyze the effects of Tungsten Inert Gas (TIG) welding repair on the structural integrity of the AISI 4130 aeronautical steel by means of experimental fatigue crack growth tests in base-material, heat-affected zone (HAZ) and weld metal. The tests were performed on hot-rolled steel plate specimens, 0.89 mm thick, with load ratio R = 0.1, constant amplitude, at 10 Hz frequency and room temperature. Increase of the fracture resistance was observed in the weld metal but decreasing in the HAZ after repair. The results were associated to microhardness and microstructural changes with the welding sequence. (C) 2010 Published by Elsevier Ltd.

Structural integrity identification based on smart materials and neural networks

This paper presents a non-model based technique to detect, locate, and characterize structural damage by combining the impedance-based structural health monitoring technique with an artificial neural network. The impedance-based structural health monitoring technique, which utilizes the electromechanical coupling property of piezoelectric materials, has shown engineering feasibility in a variety of practical field applications. Relying on high frequency structural excitations (typically>30 kHz), this technique is very sensitive to minor structural changes in the near field of the piezoelectric sensors. In order to quantitatively assess the state of structures, two sets of artificial neural networks, which utilize measured electrical impedance signals for input patterns, were developed. By employing high frequency ranges and by incorporating neural network features, this technique is able to detect the damage in its early stage and to estimate the nature of damage without prior knowledge of the model of structures. The paper concludes with an experimental example, an investigation on a massive quarter scale model of a steel bridge section, in order to verify the performance of this proposed methodology.

Surface Integrity Analysis when Milling Ultrafine-grained Steels

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Effects of Milling on Surface Integrity of Low-Carbon Steel

This work measured the effect of milling parameters on the surface integrity of low-carbon alloy steel. The Variance Analysis showed that only depth of cut did not influence on the workpiece roughness and the Pearson's Coefficient indicated that cutting speed was more influent than tool feed. All cutting parameters introduced tensile residual stress in workpiece surface. The chip formation mechanism depended specially on cutting speed and influenced on the roughness and residual stress of workpiece.

Mitochondrial Alterations in Nonalcoholic Fatty Liver Disease. Pediatric Case Description of Three Submitted Sequential Biopsies

Nonalcoholic fatty liver disease (NAFLD) is a clinical-pathological syndrome that encompasses a wide spectrum of morphologic alterations, ranging from simple hepatic steatosis to a more severe stage, known as nonalcoholic steatohepatitis (NASH). The purpose of this clinical report was to contribute to the understanding of mitochondrial alterations in NAFLD. The child (13-month-old) underwent initial biopsy in the year 2000 and was diagnosed with diffuse macro and microvesicular steatosis. Two additional biopsies were performed in 2001 and 2004. A high percentage of microvesicular steatosis was observed in the biopsies performed in 2000 and 2001. Mitochondrial size was slightly increased in the biopsy performed in the year 2000, significantly increased in 2001 and decreased in 2004. The presence of "mitochondrial hypertrophy" in the hepatocytes of an asymptomatic pediatric patient whose disease presentation was typical of NAFLD, excluding other pathological processes, allowed us to suspect that such a defect was considered the primary mitochondrial disorder.

Steatosis of indeterminate cause in a pediatric group: is it a primary mitochondrial hepatopathy?

CONTEXTO E OBJETIVO: em crianças, a esteatose hepática pode se relacionar a erros inatos do metabolismo (EIMs) ou à doença hepática gordurosa não-alcoólica (DHGNA). O objetivo deste estudo foi avaliar e caracterizar esteatose de causa indeterminada por meio de análises morfológica e morfométrica em tecido hepático. TIPO DE ESTUDO E LOCAL: Estudo transversal nos Departamentos de Patologia da Faculdade de Ciências Médicas da Universidade Estadual de Campinas (FCM-Unicamp) e Faculdade de Medicina de Botucatu da Universidade Estadual Paulista (FMB-Unesp). MÉTODOS: Foram utilizadas 18 biópsias hepáticas consecutivas obtidas de 16 pacientes com idade variando de 3 meses a 12 anos e 9 meses, inseridas num banco de dados no período do estudo, que foram analisadas por microscopia óptica e eletrônica. Na microscopia eletrônica, foi realizada determinação da densidade mitocondrial e da área superficial média das mitocôndrias nos hepatócitos. Dez pacientes com idade variando de 1 a 14 anos foram usados como grupo controle. RESULTADOS: Foi detectada esteatose pura, não acompanhada por fibrose ou outra alteração histológica. Foi verificado que, na predominância de esteatose microvesicular, houve aumento significativo da área mitocondrial média. CONCLUSÃO: A esteatose microvesicular pode estar relacionada à hepatopatia mitocondrial primária, principalmente devido à redução na β-oxidação ou parcial estagnação da fosforilação oxidativa. Por essas razões, esta forma de esteatose (que não pode ser chamada de pura) possivelmente represente uma fase inicial no amplo espectro da DHGNA. Chamamos a atenção para casos de esteatose no grupo pediátrico com predomínio da forma microvesicular, uma vez que pode haver associação com desordens mitocondriais.

Freezing of stallion epididymal sperm

Inseminations with frozen-thawed epididymal sperm have resulted in low-pregnancy rates of mares. If fertility of epididymal sperm could be improved, it would help to preserve genetic material from stallions that have suffered severe injuries, been castrated or have died. The aim of the present study was to investigate the effect of different extenders and pre-freezing addition of capacitation media on freezability of epididymal sperm and on storage at 5 degrees C for 24 h. In experiment 1, epididymal sperm samples were diluted and subsequently frozen with three different extenders: Botu-Crio((R)), EDTA-Lactose and INRA-82. Motility analysis using computer assisted sperm analyzer (CASA) demonstrated better motility for sperm in Botu-Crio((R)) than in the other extenders; EDTA-Lactose yielded better motility than INRA-82 on most evaluated parameters. There was no difference in membrane integrity among the studied extenders. From 18 inseminated mares, 12 (66%) were pregnant 15 days after AI with frozen-thawed epididymal sperm showing that Botu-Crio((R)) was able to maintain the fertility potential. In experiment 2, the effect of incubation of epididymal sperm before freezing in three capacitation media (Fert Talp, Sperm Talp, Talp + Progesterone), seminal plasma, or control was tested. Based on post-thaw motility evaluation by CASA, samples incubated in Sperm Talp showed better motility values. There were no differences in plasma or acrosomal membranes or in mitochondrial potential among groups. We concluded that Botu-Crio((R)) was better than the other extenders in the ability to preserve epididymal sperm and that pre-freeze addition of Sperm Talp was also beneficial. (c) 2008 Published by Elsevier B.V.

Effect of Progesterone and Ionomycin on Domestic Cat Sperm Motility Patterns and Acrosome Reaction

This study was aimed at assessing the changes in sperm motion patterns and the percentage of acrosome reaction (AR) in domestic cat semen after treatment with either ionomycin or progesterone (P(4)). Ten ejaculates were collected from five tomcats using an artificial vagina, and were diluted, centrifuged and resuspended in a capacitation medium. Samples were evaluated and divided into seven equal aliquots and, after 2 h at 25 degrees C, were incubated for 30 min at 38 degrees C in 5% CO(2) and then analyzed. Computer-assisted sperm analysis and a combination of three fluorescent probes were used to assess sperm plasma, acrosomal membrane integrity and mitochondrial transmembrane potential. Thirty minutes after the start of incubation, P(4) was added (10 mu g/ml) to the P1 group. Groups P2 and P3 were supplemented with P(4) (10 and 20 mu g/ml, respectively) only after 2 h of incubation, and groups I1 and I2 were supplemented with ionomycin (4 and 8 mu M, respectively) 2 h after incubation. Group E was supplemented with ethanol (0.6%) at 2 h after incubation and group C received no supplementation. Ionomycin and P(4) treatments led to a hyperactivation-like sperm motion and an increase (p < 0.05) in the percentage of AR. Although a higher (p < 0.05) percentage of AR was obtained in group I2 when compared with all P(4) groups, a decrease (p < 0.05) in total and progressive motility was observed in I2 group. As I1 group was similar to I2 to induce AR without diminishing sperm motility, we can conclude that ionomycin at 4 mu M seems to be more suitable to trigger AR in domestic cat sperm.

Motility and viability of ram sperm cryopreserved in a Tris-egg yolk extender supplemented with anti-oxidants

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Impact of proximal cytoplasmic droplets on quality traits and in-vitro embryo production efficiency of cryopreserved bull spermatozoa

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Qualidade espermática de sêmen de cães naturalmente infectados por Leishmania sp:

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Distinct mitochondrial HSP70 homologues conserved in various Leishmania species suggest novel biological functions

We report the identification of two distinct homologues of the 70-kDa mitochondrial heat shock protein (mtHSP70) from Leishmania chagasi/Leishmania infantum (Lc2.1 and Lc2.2). in Leishmania species, multiple genes encoding Lc2.2 are present whilst single genes encode Lc2.1. Strikingly, genes encoding Lc2.1-like proteins are absent from Trypanosoma species. Lc2.2 is characterized by a poly-glutamine rich C-terminus, absent from Lc2.1 or mtHSP70 homologues outside the trypanosomatids. Lc2.1 displays unique substitutions within its peptide-binding domain which modify amino acids strictly conserved in cytoplasmic and mitochondrial HSP70 proteins alike. Affinity purified antibodies recognize mainly a single protein in extracts from promastigotes/epimastigotes of various Leishmania/Trypanosoma species. Upon differentiation of Leishmania amazonensis into amastigotes a second protein (presumably Lc2.1) is induced and becomes the predominant mtHSP70 homologue expressed. Subcellular localization of these proteins was investigated and ratified a distribution throughout the mitochondrial matrix. Our results imply novel mtHSP70 functions which evolved within the genus Leishmania. (C) 2008 Elsevier B.V. All rights reserved.