Coarse-Grained Molecular Dynamics Simulation of the Aggregation Properties of Multiheaded Cationic Surfactants in Water

The aggregation property of multiheaded surfactants has been investigated by constant pressure molecular dynamics (MD) simulation in aqueous medium. The model multiheaded surfactants contain more than one headgroup (x = 2, 3, and 4) for a single tail group. This increases the hydrophilic charge progressively over the hydrophobic tail which has dramatic consequences in the aggregation behavior. In particular, we have looked at the change in the aggregation property such as critical micellar concentration (cmc), aggregation number, and size of the micelles for the multiheaded surfactants in water. We find with increasing number of headgroups of the Multiheaded surfactants that the cmc values increase and the aggregation numbers as well as the size of the micelles decrease. These trends are in agreement with the experimental findings as reported earlier with x = 1, 2, and 3. We also predict the aggregation properties of multiheaded surfactant With four headgroups (x = 4) for which no experimental studies exist yet.

Free energy calculations of glycosaminoglycan - Protein interactions

Glycosaminoglycans (GAGs) are complex highly charged linear polysaccharides that have a variety of roles in biological processes. We report the first use of molecular dynamics (MD) free energy calculations using the MM/PBSA method to investigate the binding of GAGs to protein molecules, namely the platelet endothelial cell adhesion molecule 1 (PECAM-1) and annexin A2. Calculations of the free energy of the binding of heparin fragments of different sizes reveal the existence of a region of low GAG-binding affinity in domains 5-6 of PECAM-1 and a region of high affinity in domains 2-3, consistent with experimental data and ligand-protein docking studies. A conformational hinge movement between domains 2 and 3 was observed, which allows the binding of heparin fragments of increasing size (pentasaccharides to octasaccharides) with an increasingly higher binding affinity. Similar simulations of the binding of a heparin fragment to annexin A2 reveal the optimization of electrostatic and hydrogen bonding interactions with the protein and protein-bound calcium ions. In general, these free energy calculations reveal that the binding of heparin to protein surfaces is dominated by strong electrostatic interactions for longer fragments, with equally important contributions from van der Waals interactions and vibrational entropy changes, against a large unfavorable desolvation penalty due to the high charge density of these molecules.

Innate immunity and its control in the pathogenesis of inflammatory rheumatic diseases

The pathogenesis of inflammatory rheumatic diseases, including rheumatoid arthritis (RA) and spondyloarthropathies (SpAs) such as reactive arthritis (ReA), is incompletely understood. ReA is a sterile joint inflammation, which may follow a distal infection caused by Gram-negative bacteria that have lipopolysaccharide (LPS) in their outer membrane. The functions of innate immunity that may affect the pathogenesis, prognosis and treatment of these diseases were studied in this thesis. When compared with healthy controls, whole blood monocytes of healthy subjects with previous ReA showed enhanced capacity to produce TNF, an essential proinflammatory cytokine, in response to adherent conditions (mimicking vascular endothelium made adherent by inflammatory signals) and non-specific protein kinase C stimulation. Also, blood neutrophils of these subjects showed high levels of CD11b, an important adhesion molecule, in response to adherence or LPS. Thus, high responsiveness of monocytes and neutrophils when encountering inflammatory stimuli may play a role in the pathogenesis of ReA. The results also suggested that the known risk allele for SpAs, HLA-B27, may be an additive contributor to the observed differences. The promoter polymorphisms TNF 308A and CD14 (gene for an LPS receptor component) 159T were found not to increase the risk of acute arthritis. However, all female patients who developed chronic SpA had 159T and none of them had 308A, possibly reflecting an interplay between hormonal and inflammatory signals in the development of chronic SpA. Among subjects with early RA, those having the polymorphic TLR4 +896G allele (causing the Asp299Gly change in TLR4, another component of LPS receptor) required a combination of disease-modifying antirheumatic drugs to achieve remission. It is known that rapid treatment response is essential in order to maintain the patients work ability. Hence, +896G might be a candidate marker for identifying the patients who need combination treatment. The production of vascular endothelial growth factor (VEGF), which strongly promotes vascular permeability and angiogenesis that takes place e.g. early in rheumatic joints, was induced by LPS and inhibited by interferon (IFN)-alpha in peripheral blood mononuclear cells. These long-living cells might provide a source of VEGF when stimulated by LPS and migrating to inflamed joints, and the effect of IFN-alpha may contribute to the clinical efficacy of this cytokine in inhibiting joint inflammation.

Free energy calculations of the interactions of c-Jun-based synthetic peptides with the c-Fos protein

The c-Fos–c-Jun complex forms the activator protein 1 transcription factor, a therapeutic target in the treatment of cancer. Various synthetic peptides have been designed to try to selectively disrupt the interaction between c-Fos and c-Jun at its leucine zipper domain. To evaluate the binding affinity between these synthetic peptides and c-Fos, polarizable and nonpolarizable molecular dynamics (MD) simulations were conducted, and the resulting conformations were analyzed using the molecular mechanics generalized Born surface area (MM/GBSA) method to compute free energies of binding. In contrast to empirical and semiempirical approaches, the estimation of free energies of binding using a combination of MD simulations and the MM/GBSA approach takes into account dynamical properties such as conformational changes, as well as solvation effects and hydrophobic and hydrophilic interactions. The predicted binding affinities of the series of c-Jun-based peptides targeting the c-Fos peptide show good correlation with experimental melting temperatures. This provides the basis for the rational design of peptides based on internal, van der Waals, and electrostatic interactions.

Calculations of the free energy of interaction of the c-Fos−c-Jun coiled coil: Effects of the solvation model and the inclusion of polarization effects

The leucine zipper region of activator protein-1 (AP-1) comprises the c-Jun and c-Fos proteins and constitutes a well-known coiled coil protein−protein interaction motif. We have used molecular dynamics (MD) simulations in conjunction with the molecular mechanics/Poisson−Boltzmann generalized-Born surface area [MM/PB(GB)SA] methods to predict the free energy of interaction of these proteins. In particular, the influence of the choice of solvation model, protein force field, and water potential on the stability and dynamic properties of the c-Fos−c-Jun complex were investigated. Use of the AMBER polarizable force field ff02 in combination with the polarizable POL3 water potential was found to result in increased stability of the c-Fos−c-Jun complex. MM/PB(GB)SA calculations revealed that MD simulations using the POL3 water potential give the lowest predicted free energies of interaction compared to other nonpolarizable water potentials. In addition, the calculated absolute free energy of binding was predicted to be closest to the experimental value using the MM/GBSA method with independent MD simulation trajectories using the POL3 water potential and the polarizable ff02 force field, while all other binding affinities were overestimated.

Atomistic investigation into the mechanical behaviour of crystalline and amorphous TiO2 nanotubes

Titanium dioxide (TiO2) nanotubes are appealing to research communities due to their excellent functional properties. However, there is still a lack of understanding of their mechanical properties. In this work, we conduct molecular dynamics (MD) simulations to investigate the mechanical behaviour of rutile and amorphous TiO2 nanotubes. The results indicate that the rutile TiO2 nanotube has a much higher Young's modulus (∼800 GPa) than the amorphous one (∼400 GPa). Under tensile loading, rutile nanotubes fail in the form of brittle fracture but significant ductility (up to 30%) has been observed in amorphous nanotubes. This is attributed to a unique ‘repairing’ mechanism via bond reconstruction at under-coordinated sites as well as bond conversion at over-coordinated sites. In addition, it is observed that the fracture strength of rutile nanotubes is strongly dependent on their free surfaces. These findings are considered to be useful for development of TiO2 nanostructures with improved mechanical properties.

Ligand dependent intra and inter subunit communication in human tryptophanyl tRNA synthetase as deduced from the dynamics of structure networks

Homodimeric protein tryptophanyl tRNA synthetase (TrpRS) has a Rossmann fold domain and belongs to the 1c subclass of aminoacyl tRNA synthetases. This enzyme performs the function of acylating the cognate tRNA. This process involves a number of molecules (2 protein subunits, 2 tRNAs and 2 activated Trps) and thus it is difficult to follow the complex steps in this process. Structures of human TrpRS complexed with certain ligands are available. Based on structural and biochemical data, mechanism of activation of Trp has been speculated. However, no structure has yet been solved in the presence of both the tRNA(Trp) and the activated Trp (TrpAMP). In this study, we have modeled the structure of human TrpRS bound to the activated ligand and the cognate tRNA. In addition, we have performed molecular dynamics (MD) simulations on these models as well as other complexes to capture the dynamical process of ligand induced conformational changes. We have analyzed both the local and global changes in the protein conformation from the protein structure network (PSN) of MD snapshots, by a method which was recently developed in our laboratory in the context of the functionally monomeric protein, methionyl tRNA synthetase. From these investigations, we obtain important information such as the ligand induced correlation between different residues of this protein, asymmetric binding of the ligands to the two subunits of the protein as seen in the crystal structure analysis, and the path of communication between the anticodon region and the aminoacylation site. Here we are able to elucidate the role of dimer interface at a level of detail, which has not been captured so far.

New perspectives on design and delivery: The context of service desk

This research has identified the trends apparent in service desk design and delivery literature. By doing archival analysis, this investigation has led to the development of a generic framework which has identified three themes in service desk design – User groups, Support models, and Technology types – and two themes in service desk delivery – Direction of delivery, and Executive support level. This research also aims to provide an understanding of service desk functions and the challenges faced by organisations in delivering those functions.

Mechanism of failure in a free-standing Pt-aluminide bond coat during tensile testing at room temperature

The room temperature (RT) tensile behaviour of a free-standing high activity Pt-aluminide bond coat has been evaluated by microtensile testing technique. The coating had a typical three-layer microstructure. The stress-strain plot for the free-standing coating was linear, indicating the coating to be brittle at RT. Different fracture features were observed across the coating layers, namely quasi-cleavage in the outer layer and inner interdiffusion zone, and cleavage in the intermediate layer. By employing interrupted tensile test and observing the cross-sectional microstructure of the tested specimens, it was determined that failure of the microtensile samples occurred by the initiation of a single crack in the intermediate layer of the coating and its subsequent inside-out propagation. Such a mechanism of failure has been explained in terms of the fracture features observed across the sample thickness. This mechanism of failure is consistent with fracture toughness values of the individual coating layers. (C) 2009 Elsevier B.V. All rights reserved.

2-[(E)-(4-hydroxy-3-methoxybenzylidene)amino]-N-(2-methylphenyl)-4,5,6,7-tetrahydro-1-benzothiophene-3-carboxamide

The title compound, C24H24N2O3S, exhibits antifungal and antibacterial properties. The compound crystallizes with two molecules in the asymmetric unit, with one molecule exhibiting 'orientational disorder' in the crystal structure with respect to the cyclohexene ring. The o-toluidine groups in both molecules are noncoplanar with the respective cyclohexene-fused thiophene ring. In both molecules, there is an intramolecular N-H...N hydrogen bond forming a pseudo-six-membered ring which locks the molecular conformation and eliminates conformational flexibility. The crystal structure is stabilized by O-H...O hydrogen bonds; both molecules in the asymmetric unit form independent chains, each such chain consisting of alternating 'ordered' and 'disordered' molecules in the crystal lattice.

Novel synthesis of superparamagnetic Ni-Co-B nanoparticles and their effect on superconductor properties of MgB2

A new procedure for the preparation of amorphous Ni-Co-B nanoparticles is reported, with a detailed investigation of their morphology by X-ray diffraction and transmission electron microscopy, as well as their magnetic properties. Many factors, such as chemical composition, anisotropy, size and shape of the particles, were controlled through chemical synthesis, resulting in the control of morphological and magnetic properties of the nanoparticles. Controlling pH values with ethylenediamine and using sodium dodecyl sulfate surfactant lowered the size of the nanoparticles to below 10 nm. Such a small structure and chemical disorder in nanocrystalline materials lead to magnetic properties that are different from those in their bulk-sized counterparts. The obtained nanoparticles can be used for different purposes, from pharmaceutical applications to implementations in different materials technology. The focus of this research is the synthesis of Ni-Co-B nanoparticles in a new way and studying the reaction of Ni-Co-B nanoparticles with Mg and B precursors and their effect on MgB2 properties. New nanostructures are formed in the reaction of Ni-Co-B nanoparticles with Mg: Mg2Ni, Co2Mg and possibly Mg2Co.

Depressive Disorders in Primary Health Care

The Vantaa Primary Care Depression Study (PC-VDS) is a naturalistic and prospective cohort study concerning primary care patients with depressive disorders. It forms a collaborative research project between the Department of Mental and Alcohol Research of the National Public Health Institute, and the Primary Health Care Organization of the City of Vantaa. The aim is to obtain a comprehensive view on clinically significant depression in primary care, and to compare depressive patients in primary care and in secondary level psychiatric care in terms of clinical characteristics. Consecutive patients (N=1111) in three primary care health centres were screened for depression with the PRIME-MD, and positive cases interviewed by telephone. Cases with current depressive symptoms were diagnosed face-to-face with the Structured Clinical Interview for DSM-IV Axis I Disorders (SCID-I/P). A cohort of 137 patients with unipolar depressive disorders, comprising all patients with at least two depressive symptoms and clinically significant distress or disability, was recruited. The Structured Clinical Interview for DSM-IV Axis II Disorders (SCID-II), medical records, rating scales, interview and a retrospective life-chart were used to obtain comprehensive cross-sectional and retrospective longitudinal information. For investigation of suicidal behaviour the Scale for Suicidal Ideation (SSI), patient records and the interview were used. The methodology was designed to be comparable to The Vantaa Depression Study (VDS) conducted in secondary level psychiatric care. Comparison of major depressive disorder (MDD) patients aged 20-59 from primary care in PC-VDS (N=79) was conducted with new psychiatric outpatients (N =223) and inpatients (N =46) in VDS. The PC-VDS cohort was prospectively followed up at 3, 6 and 18 months. Altogether 123 patients (90%) completed the follow-up. Duration of the index episode and the timing of relapses or recurrences were examined using a life-chart. The retrospective investigation revealed current MDD in most (66%), and lifetime MDD in nearly all (90%) cases of clinically significant depressive syndromes. Two thirds of the “subsyndromal” cases had a history of major depressive episode (MDE), although they were currently either in partial remission or a potential prodromal phase. Recurrences and chronicity were common. The picture of depression was complicated by Axis I co-morbidity in 59%, Axis II in 52% and chronic Axis III disorders in 47%; only 12% had no co-morbidity. Within their lifetimes, one third (37%) had seriously considered suicide, and one sixth (17%) had attempted it. Suicidal behaviour clustered in patients with moderate to severe MDD, co-morbidity with personality disorders, and a history of treatment in psychiatric care. The majority had received treatment for depression, but suicidal ideation had mostly remained unrecognised. The comparison of patients with MDD in primary care to those in psychiatric care revealed that the majority of suicidal or psychotic patients were receiving psychiatric treatment, and the patients with the most severe symptoms and functional limitations were hospitalized. In other clinical aspects, patients with MDD in primary care were surprisingly similar to psychiatric outpatients. Mental health contacts earlier in the current MDE were common among primary care patients. The 18-month prospective investigation with a life-chart methodology verified the chronic and recurrent nature of depression in primary care. Only one-quarter of patients with MDD achieved and maintained full remission during the follow-up, while another quarter failed to remit at all. The remaining patients suffered either from residual symptoms or recurrences. While severity of depression was the strongest predictor of recovery, presence of co-morbid substance use disorders, chronic medical illness and cluster C personality disorders all contributed to an adverse outcome. In clinical decision making, beside severity of depression and co-morbidity, history of previous MDD should not be ignored by primary care doctors while depression there is usually severe enough to indicate at least follow-up, and concerning those with residual symptoms, evaluation of their current treatment. Moreover, recognition of suicidal behaviour among depressed patients should also be improved. In order to improve outcome of depression in primary care, the often chronic and recurrent nature of depression should be taken into account in organizing the care. According to literature management programs of a chronic disease, with enhancement of the role of case managers and greater integration of primary and specialist care, have been successful. Optimum ways of allocating resources between treatment providers as well as within health centres should be found.

Relationship between quality certification and financial and non-financial performance of organizations

At present, many countries have either embraced ISO9001 or used it as the basis of their national quality certification systems. However, few studies have been conducted to examine the benefits companies’ gain from achieving and implementing ISO9001 standards (Chikuku et al. 2012; Psomas et al. 2013; Sampaio et al. 2011a,b). Analysis has brought much more confused and uneven results across the countries. Turning to the experience of Malaysia, this country has witnessed a spectacular growth at an average rate of 9.89% per annum of ISO certificates issued to companies operating within its borders (ISO Survey 2012). While many companies rush to be ISO 9001 certified whether this brings about better benefits (both the financial and the non-financial) is still an open question. In this study, the research problems were first formulated from the literature and then a questionnaire survey was conducted to test the hypotheses. A survey was administered to chief executives officers and managers across manufacturing and service organizations in Malaysia. Multivariate analysis and SPSS macro developed by Preacher and Hayes were used as statistical techniques to the financial and non-financial benefits of ISO9001 certification. The survey instrument was a two-page questionnaire comprising three sections. The first section of the questionnaire covered the company’s profile. The second section consisted of 25 items on internal benefits and third section consisted of 7 items on external benefits measured on 1–5 Likert scale to assess the benefits of ISO9001 certification. Total 201 valid responses were received. Results of the study indicate that there was no significant direct relationship between ISO9001 certification and organizational financial performance, while strong statistical evidence was found to support the direct relationship between ISO9001 certification and non-financial performance. The findings of the study discovered that financial performance is actually directly related to two non-financial measures, namely quality performance and local and international business performance, which are directly and significantly influenced by ISO9001 certification. Therefore non-financial performance measures are involved in the mediational process. The findings will assist practitioners in taking right courses of action that make the implementation of this standard more effective. For example, the study findings study suggests that companies should put emphasize on nonfinancial factors to improve their financial performance.

Engineered protease inhibitors based on sunflower trypsin inhibitor-1 (SFTI-1) provide insights into the role of sequence and conformation in Laskowski mechanism inhibition

Laskowski inhibitors regulate serine proteases by an intriguing mode of action that involves deceiving the protease into synthesizing a peptide bond. Studies exploring naturally occurring Laskowski inhibitors have uncovered several structural features that convey the inhibitor's resistance to hydrolysis and exceptional binding affinity. However, in the context of Laskowski inhibitor engineering, the way that various modifications intended to fine-tune an inhibitor's potency and selectivity impact on its association and dissociation rates remains unclear. This information is important as Laskowski inhibitors are becoming increasingly used as design templates to develop new protease inhibitors for pharmaceutical applications. In this study, we used the cyclic peptide, sunflower trypsin inhibitor-1 (SFTI-1), as a model system to explore how the inhibitor's sequence and structure relate to its binding kinetics and function. Using enzyme assays, MD simulations and NMR spectroscopy to study SFTI variants with diverse sequence and backbone modifications, we show that the geometry of the binding loop mainly influences the inhibitor's potency by modulating the association rate, such that variants lacking a favourable conformation show dramatic losses in activity. Additionally, we show that the inhibitor's sequence (including both the binding loop and its scaffolding) influences its potency and selectivity by modulating both the association and the dissociation rates. These findings provide new insights into protease inhibitor function and design that we apply by engineering novel inhibitors for classical serine proteases, trypsin and chymotrypsin and two kallikrein-related peptidases (KLK5 and KLK14) that are implicated in various cancers and skin diseases.