Single crystal beta-Ga2O3: Cr grown by floating zone technique and its optical properties

beta-Ga2O3: Cr single crystals were grown by floating zone technique. Absorption spectra and fluorescence spectra were measured at room temperature. The values of field splitting parameter Dq and Racah parameter B were obtained by the peak values of absorption spectra. The value 10Dq/B=23.14 manifests that in beta-Ga2O3 crystals Cr3+ ions are influenced by low energy crystal field. After high temperature annealing in air, the Cr3+ intrinsic emission was enhanced and the green luminescence disappeared. The strong and broad 691 nm emission was obtained at 420 nm excitation due to the electron transition occurred from T-4(2) to (4)A(2). The studies manifest that the beta-Ga2O3 crystals have the potential application for tunable laser.

Edge-defined, film-fed growth (EFG) technique for the preparation of alpha-Al2O3 : C crystal with highly sensitive thermoluminescence response

In this work, alpha-Al2O3:C, a highly sensitive thermoluminescence dosimetry crystal, was grown by the EFG method in which a graphite heating unit and shield acted as the carbon source during the growth process. The optical, luminescent properties and dosimetric characteristics of the crystal were investigated. The as-grown crystal shows a single glow peak at 536 K, which is associated with Cr3+ ions. After annealing in H-2 at 1673 K for 80 h, the crystal shows a single glow peak at 460 K and a blue emission band at 415 nm. The thermoluminescent response of the annealed crystal shows linear-sublinear-saturation characteristics in the dose range from 5 x 10(-6) to 100 Gy.

Growth of highly sensitive thermoluminescent crystal alpha-Al2O3 : C by the temperature gradient technique

In this work, an alpha-Al2O3:C crystal with highly sensitive thermoluminescence was directly grown by the temperature gradient technique (TGT) using Al2O3 and graphite powders as raw materials. The optical and luminescent properties and the dosimetric characteristics of the crystal were investigated. An as-grown alpha-Al2O3:C crystal shows a single glow peak at 462 K and a blue emission peak at 415 nm. The thermoluminescence (TL) response of the crystal shows a linear-sublinear-saturation characteristic. In the dose range from 5 x 10(-6) to 10Gy, the alpha-Al2O3:C crystal shows excellent linearity, and saturation was observed at about 30Gy. The sensitivity of the crystal decreases as the heating rate increases. (c) 2008 Elsevier B.V. All rights reserved.

A novel non-intrusive sampling technique for CO2 laser on-line beam monitoring utilising a silicon mirror

The measurement of high speed laser beam parameters during processing is a topic that has seen growing attention over the last few years as quality assurance places greater demand on the monitoring of the manufacturing process. The targets for any monitoring system is to be non-intrusive, low cost, simple to operate, high speed and capable of operation in process. A new ISO compliant system is presented based on the integration of an imaging plate and camera located behind a proprietary mirror sampling device. The general layout of the device is presented along with the thermal and optical performance of the sampling optic. Diagnostic performance of the system is compared with industry standard devices, demonstrating the high quality high speed data which has been generated using this system.

Investigation into channel angular extrusion and the UREAD energy absorption technique

.

Biocompatibilidade do polissacarídeo celulósico sintetizado por zoogloea sp.: um estudo em bexigas de coelho

Atualmente, o material utilizado para o tratamento endoscópico é o Deflux, porém este é um material não-biológico. Sabe-se que a substância ideal deve ser atóxica, biocompatível, não-migratória, não-antigênica e deve causar o mínimo possível de inflamação no local do implante. A bactéria Zoogloea sp. produz um exopolissacarídeo celulósico (CEP) com baixa citotoxicidade e alto biocompatibilidade. O objetivo deste estudo é investigar, na bexiga de coelho, a biocompatibilidade de implantes de exopolissacarídeo de celulose, produzidos pela Zooglea sp. Foram utilizados como modelo experimental, 20 coelhos adultos da raça Califórnia, com média de seis meses de idade. Os animais foram divididos em dois grupos, sendo o grupo G1, composto por animais mortos três dias após a aplicação do implante (n=9), e o grupo G2, composto por animais mortos três meses após a aplicação do implante (n=11). Cada animal recebeu, no total, quatro implantes, sendo dois de gel de biopolímero e dois de gel Deflux. Foram realizadas as técnicas imunohistoquímicas para marcação de colágeno tipos I e III, alfa-actina de músculo liso, PCNA e reação química TUNEL. Nas amostras de três dias, os implantes de CEP e deflux, eram estruturalmente homogêneos e livres de células inflamatórias ou vasos sanguíneos. Por outro lado, nas amostras de três meses, com exceção de algumas áreas, o CEP estava organizado como feixes curtos que eram sugestivos de um tecido fibroso. Apesar disso, o implante de CEP corou negativamente para colágenos tipos I e III, fibras elásticas, enquanto que o tricrômico de masson, não indicou a presença de colágeno. Em contraste as áreas de implante de deflux nas amostras de três meses estavam fragmentadas, mas ainda eram homogêneas, e ainda não havia nenhuma célula nem vaso sanguíneo em seu interior. As células positivas para PCNA podiam ser claramente percebidas dentro dessas ilhotas, dessa forma indicando um processo inflamatórioproliferativo, em curso. No grupo sacrificado aos três meses, os implantes de deflux ainda estavam negativos, mas em torno das áreas de CEP algumas células positivas para a técnica do TUNEL eram perceptíveis. Nos implantes de CEP de três meses, muitos vasos sanguíneos eram visualizados, e a sua densidade era de 23.865.48. A densidade de microvasos na lâmina própria (41.5111.19) foi significativamente diferente (p<0.001) daquela no implante de CEP. Nossos resultados mostraram que o CEP possui pouca imunogenicidade e se integra melhor no tecido hospedeiro quando comparado ao deflux. Portanto o CEP deve ser um material eficiente em casos em que a incorporação ao tecido é desejada como por exemplo em estruturas de suporte na cirurgia de reconstrução

A preliminary investigation of Elastomer Visible Implant (EVI)tag retention rates and the effect of tagging on the growth and survival of barbel (Barbus barbus L.).

The Elastomer Visible Implant system (EVI) is a relatively new technique for batch marking fish. The aim of this study was to assess retention rates and the possible effects of tagging on the growth and mortality of barbel, Barbus barbus, (81-197mm, fork length) over approximately 2 months using a syringe injection system.

Modified sorting technique to mitigate the collateral mortality of trawled school prawns (Metapenaeus macleayi)

The potential for changes to onboard handling practices in order to improve the fate of juvenile school prawns (Metapenaeus macleayi) discarded during trawling were investigated in two Australian rivers (Clarence and Hunter) by comparing a purpose-built, water-filled sorting tray against a conventional dry tray across various conditions, including the range of typical delays before the start of sorting the catch (2 min vs. 15 min). Juvenile school prawns (n= 5760), caught during 32 and 16 deployments in each river, were caged and sacrificed at four times: immediately (T0), and at 24 (T24), 72 (T72), and 120 (T12 0) hours after having been discarded. In both rivers, most mortalities occurred between T0 and T24 and, after adjusting for control deaths (<12%), were greatest for the 15-min conventional treatment (up to 41% at T120). Mixed-effects logistic models revealed that in addition to the sampling time, method of sorting, and delay in sorting, the weight of the catch, salinity, and percentage cloud cover were significant predictors of mortality. Although trawling caused some mortalities and comparable stress (measured as L -lactate) in all school prawns, use of the water tray lessened the negative impacts of some of the above factors across both the 2-min and 15-min delays in sorting so that the overall discard mortality was reduced by more than a third. When used in conjunction with selective trawls, widespread application of the water tray should help to improve the sustainability of trawling for school prawns.

Estimates of commercial longline selectivity for Pacific halibut (Hippoglossus stenolepis) from multiple marking experiments

The term “selectivity” refers to the relationship between the size (or age) of a fish and its vulnerability to a given kind of fishing gear. A selectivity schedule, along with other parameters, is normally estimated in the course of fitting a stock assessment model, and the estimated schedule can have a large effect on both the estimate of present stock abundance and the choice of an appropriate harvest rate. The form of the relationship is usually not known and not well determined by the data, and equally good model fits can often be obtained with different plausible specifications of selectivity. Choosing among the model fits and associated abundance estimates in this situation is problematic (Sigler, 1999; Sullivan et al., 19

Low cost murrel seed production technique for fish farmers

A simple and low-cost breeding technology for breeding the striped murrel, Channa striatus in hapas in ponds was developed in India.