Adsorção de Pb(II) utilizando adsorvente composto por montmorilonita e dolomita

The destructive impact of improper disposal of heavy metals in the environment increases as a direct result of population explosion, urbanization and industrial expansion and technological developments. Argil are potential materials for adsorption of inorganic and the pelletization of it is required for use in adsorptive columns of fixed bed. The low cost and the possibility of regeneration makes these materials attractive for use in the purification process, capable of removing inorganic compounds in contaminated aquatic environments. In this work was made pellets of a mixture of dolomite and montmorillonite by wet agglomeration, in different percentages. The removal of Pb (II) was investigated through experimental studies, and was modeled by kinetic models and isotherms of adsorption. The materials were characterized using the techniques of XRD, TG / DTA, FT-IR, and surface area by BET method. The results showed the adsorption efficiency of the contaminant by the composite material studied in synthetic solution. The study found that the adsorption follows the Langmuir model, and the kinetics of adsorption follows the model of pseudosecond order

Remoção de metais pesados em efluentes sintéticos utilizando vermiculita como adsorvente

Heavy metals are used in many industrial processestheirs discard can harm fel effects to the environment, becoming a serious problem. Many methods used for wastewater treatment have been reported in the literature, but many of them have high cost and low efficiency. The adsorption process has been used as effective for the metal remoal ions. This paper presents studies to evaluate the adsorption capacity of vermiculite as adsorbent for the heavy metals removal in a synthetic solution. The mineral vermiculite was characterized by differents techniques: specific surface area analysis by BET method, X-ray diffraction, raiosX fluorescence, spectroscopy in the infraredd region of, laser particle size analysis and specific gravity. The physical characteristics of the material presented was appropriate for the study of adsorption. The adsorption experiments weredriveal finite bath metod in synthetic solutions of copper, nickel, cadmium, lead and zinc. The results showed that the vermiculite has a high potential for adsorption, removing about 100% of ions and with removal capacity values about 85 ppm of metal in solution, 8.09 mg / g for cadmium, 8.39 mg/g for copper, 8.40 mg/g for lead, 8.26 mg/g for zinc and 8.38 mg/g of nickel. The experimental data fit in the Langmuir and Freundlich models. The kinetic datas showed a good correlation with the pseudo-second order model. It was conducteas a competition study among the metals using vermiculiti a adsorbent. Results showed that the presence of various metals in solution does not influence their removal at low concentrations, removing approximat wasely 100 % of all metals present in solutions

Compósitos poliméricos a base de fibras de licuri: efeitos da hibridização e do envelhecimento ambiental acelerado

The gradual replacement of conventional materials by the ones called composite materials is becoming a concern about the response of these composites against adverse environmental conditions, such as ultraviolet radiation, high temperature and moist. Also the search for new composite using natural fibers or a blend of it with synthetic fibers as reinforcement has been studied. In this sense, this research begins with a thorough study of microstructural characterization of licuri fiber, as a proposal of alternative reinforcement to polymeric composites. Thus, a study about the development of two composite laminates was done. The first one, involving only the fiber of licuri and the second comprising a hybrid composite based of fiber glass E and the fiber of licuri, in order to know the performance of the fiber when of fiber across the hybridization process. The laminates were made in the form of plates using the tereftálica ortho-polyester resin as matrix. The composite laminate made only by licuri fiber had two reinforcing fabric layers of unidirectional licuri and the hybrid composite had two reinforcing layers of unidirectional licuri fabric and three layers of fiber short glass-E mat. Finally, both laminates was exposed to aging acceleration in order to study the influence of environmental degradation involving the mechanical properties and fracture characteristics thereof. Regarding the mechanical properties of composites, these were determined through uniaxial tensile tests, uniaxial compression and three bending points for both laminates in original state, and uniaxial tensile tests and three bending points after accelerated aging. As regards the study of structural degradation due to aging of the laminates, it was carried out based on microscopic analysis and microstructure, as well as measuring weight loss. The characteristics of the fracture was performed by macroscopic and microscopic (optical and SEM) analysis. In general, the laminated composites based on fiber licuri showed some advantages in their responses to environmental aging. These advantages are observed in the behavior related to stiffness as well as the microstructural degradation and photo-oxidation processes. However, the structural integrity of this laminate was more affected in case the action of uniaxial tensile loads, where it was noted a lower rate of withholding his last resistance property

Estudo sobre as potencialidades de compósitos à base de gesso e fibras de coco seco para aplicação na construção civil

The use of gypsum, one of the oldest building materials for the construction industry in the country has been experiencing a significant and steady growth, due to its low cost and some of its properties that confer comparative advantage over other binder materials. Its use comprises various applications including the coating of walls and the production of internal seals and linings. Moreover, the fibers are being increasingly incorporated into arrays fragile in an attempt to improve the properties of the composite by reducing the number of cracks, the opening of the same and its propagation velocity. Other properties, depending on the function of the component material or construction, among these thermal and acoustic performances, are of great importance in the context of buildings and could be improved, that is, having better performance with this embodiment. Conduct a comparative study of physico-mechanical, thermal and acoustic composite gypsum incorporating dry coconut fiber, in the form of blanket, constituted the main objective of this work. Improving the thermal and acoustic performances of precast gypsum, used for lining and internal vertical fences of buildings, was the purpose of development of these composites. To evaluate the effect of fiber content on the properties of the composites were used to manufacture the composite layer with different thicknesses. The composites were fabricated in the form of plates with dimensions of 500x500x24mm. To facilitate the comparative study of the properties were also made with material gypsum boards only. We then determined the physico-mechanical, thermal and acoustical plaster and composites. The results indicated that the composites were significant gains in relation to thermal performance and also acoustic, in certain frequency range, increasing the thickness of the blanket. Concerning other physical-mechanical properties, the results showed that although the compressive strength was lower than for the composite did not occur after a fracture catastrophic failure. The same trend was observed with regard to resistance to bending, since the composites have not suffered sudden rupture and still continued after the load supporting point of maximum load

Estudo de adsorvente obtido de terras diatomáceas para remoção de metais pesados em águas produzidas: processamento, caracterização e dinâmica em leito fixo

The acceleration of industrial growth in recent decades on all continents aroused the interest of the companies to counter the impacts produced on the environment, spurred primarily by major disasters in the petroleum industry. In this context, the water produced is responsible for the largest volume of effluent from the production and extraction of oil and natural gas. This effluent has in its composition some critical components such as inorganic salts, heavy metals (Fe, Cu, Zn, Pb, Cd, ), presence of oil and chemicals added in the various production processes. In response to impact, have been triggered by research alternative adsorbent materials for water treatment and water produced, in order to removing oils and acids and heavy metals. Many surveys of diatomaceous earth (diatomite) in Brazil involve studies on the physico-chemical, mineral deposits, extraction, processing and applications. The official estimated Jazi are around 2.5 million tonnes, the main located in the states of Bahia (44%) and Rio Grande do Norte (37,4%). Moreover, these two states appear as large offshore producers, earning a prominent role in research of adsorbents such as diatomite for treatment of water produced. Its main applications are as an agent of filtration, adsorption of oils and greases, industrial load and thermal insulator. The objective of this work was the processing and characterization of diatomite diatomaceous earth obtained from the municipality of Macaíba-RN (known locally as tabatinga) as a low cost regenerative adsorbent for removal of heavy metals in the application of water produced treatment. In this work we adopted a methodology for batch processing, practiced by small businesses located in producing regions of Brazil. The characterization was made by X-ray diffraction (XRD), scanning electron microscopy (SEM) and specific surface area (BET). Research conducted showed that the improvement process used was effective for small volume production of diatomite concentrated. The diatomite obtained was treated by calcination at temperature of 900 oC for 2 hours, with and without fluxing Na2CO3 (4%), according to optimal results in the literature. Column adsorption experiments were conducted to percolation of the in nature, calcined and calcined fluxing diatomites. Effluent was used as a saline solution containing ions of Cu, Zn, Na, Ca and Mg simulating the composition of produced waters in the state of Rio Grande do Norte, Brazil. The breakthrough curves for simultaneous removal of copper ions and zinc as a result, 84.3% for calcined diatomite and diatomite with 97.3 % for fluxing. The calcined fluxing diatomite was more efficient permeability through the bed and removal of copper and zinc ions. The fresh diatomite had trouble with the permeability through the bed under the conditions tested, compared with the other obtained diatomite. The results are presented as promising for application in the petroleum industry

Extração de metais (K, Mg, Ba, Ca, Cr, Mn, Li, Fe) de água produzida utilizando sistema microemulsionado

The produced water is a byproduct formed due to production of petroleum and carries with it a high amount of contaminants such as oil particles in suspension, organic compounds and metals. Thus, these latter pollutants are very difficult to treat because of its high solubility in water. The objective of this work is to use and evaluate a microemulsioned system to remove metals ( K , Mg , Ba , Ca , Cr , Mn , Li , Fe ) of synthetic produced water. For the extraction of metals, it was used a pseudoternary diagram containing the following phases: synthetic produced water as the aqueous phase (AP), hexane as organic phase (OP), and a cosurfactant/surfactant ratio equal to four (C/S = 4) as the third phase, where the OCS (saponified coconut oil) was used as surfactant and n-butanol as cosurfactant. The synthetic produced water was prepared in a bench scale and the region of interest in the diagram for the removal of metals was determined by experimental design called. Ten points located in the phase Winsor II were selected in an area with a large amount of water and small amounts of reagents. The samples were analyzed in atomic absorption spectrometer, and the results were evaluated through a statistical assesment, allowing the efficiency analysis of the effects and their interactions. The results showed percentages of extraction above 90% for the metals manganese, iron, chromium, calcium, barium and magnesium, and around 45% for metals lithium and potassium. The optimal point for the simultaneous removal of metals was calculated using statistical artifact multiple response function (MR). This calculation showed that the point of greatest extraction of metals occurs was the J point, with the composition [72% AP, 9% OP, 19% C/S], obtaining a global extraction percentage about 80%. Considering the aspects analyzed, the microemulsioned system has shown itself to be an effective alternative in the extraction of metals on synthetic produced water remediation

Obtenção de álcool alílico (PROP-2-EN-1-OL) a partir da glicerina derivada do biodiesel de óleo de mamona

In this work, biodiesel was produced from castor oil that was a byproduct glycerin. The molar ratio between oil and alcohol, as well as the use of (KOH) catalyst to provide the chemical reaction is based on literature. The best results were obtained using 1 mol of castor oil (260g) to 3 moles of methyl alcohol (138g), using 1.0% KOH as catalyst at a temperature of 260 ° C and shaken at 120 rpm. The oil used was commercially available, the process involves the reaction of transesterification of a vegetable oil with methyl alcohol. The product of this reaction is an ester, biodiesel being the main product and the glycerin by-product which has undergone treatment for use as raw material for the production of allyl alcohol. The great advantage of the use of glycerin to obtain allyl alcohol is that its use eliminates the large amount of waste of the biodiesel and various forms of insult to the environment. The reactions for the formation of allyl alcohol was conducted from formic acid and glycerin in a ratio 1/1, at a temperature of 260oC in a heater blanket, being sprayed by a spiral condenser for a period of 2 hours and the product obtained contains mostly the allylic alcohol .. The monitoring of reactions was performed by UV-Visible Spectrophotometer: FTIR Fourier transform, the analysis showed that these changes occur spectrometer indicating the formation of the product allylic alcohol (prop-2-en-1-ol) in the presence of water, This alcohol was appointed Alcohol GL. The absorption bands confirms that the reaction was observed in (υ C = C) 1470 -1600 cm -1 and (υ CO), 3610-3670 attributed to C = C groups and OH respectively. The thermal analysis was carried out in a thermogravimetric analyzer SDT Q600, where the mass and temperature are displayed against time, that allows checking the approximate rate of heating. The innovative methodology developed in the laboratory (LABTAM, UFRN), was able to treat the glycerine produced by transesterification of castor oil and used as raw material for production of allyl alcohol, with a yield of 80%, of alcohol, the same is of great importance in the manufacture of polymers, pharmaceuticals, organic compounds, herbicides, pesticides and other chemicals

Desenvolvimento de uma formulação cólon específica visando o tratamento da colite ulcerativa

Micro and nanoparticulate systems as drug delivery carriers have achieved successful therapeutic use by enhancing efficacy and reducing toxicity of potent drugs. The improvement of pharmaceutical grade polymers has allowed the development of such therapeutic systems. Microencapsulation is a process in which very thin coatings of inert natural or synthetic polymeric materials are deposited around microsized particles of solids or around droplets. Products thus formed are known as microparticles. Xylan is a natural polymer abundantly found in nature. It is the most common hemicellulose, representing more than 60% of the polysaccharides existing in the cell walls of corn cobs, and is normally degraded by the bacterial enzymes present in the colon of the human body. Therefore, this polymer is an eligible material to produce colon-specific drug carriers. The aim of this study was to evaluate the technological potential of xylan for the development of colon delivery systems for the treatment of inflammatory bowel diseases. First, coacervation was evaluated as a feasible method to produce xylan microcapsules. Afterwards, interfacial cross-linking polymerization was studied as a method to produce microcapsules with hydrophilic core. Additionally, magnetic xylan-coated microcapsules were prepared in order to investigate the ability of producing gastroresistant systems. Besides, the influence of the external phase composition on the production and mean diameter of microcapsules produced by interfacial cross-linking polymerization was investigated. Also, technological properties of xylan were determined in order to predict its possible application in other pharmaceutical dosage forms

Farinha de vísceras de aves em rações para a tilápia do Nilo (Oreochromis niloticus L.) durante a fase de reversão sexual

Neste trabalho, objetivou-se avaliar o desempenho, a sobrevivência e a efetividade de reversão de larvas de tilápia do Nilo (Oreochromis niloticus L.) alimentadas com rações contendo níveis crescentes de inclusão de farinha de vísceras de aves (FVA). Utilizou-se 500 larvas de tilápia do Nilo com dois dias de idade, distribuídas em um delineamento inteiramente casualizado com cinco tratamentos e cinco repetições, sendo a unidade experimental constituída por um aquário de 30 L com 20 larvas. Foram elaboradas cinco rações com cinco níveis de inclusão de FVA ( 0; 20; 40, 60% e 60% mais lisina sintética). Foram elaboradas rações isocalóricas, isocálcicas, isofosfóricas e isoprotéicas, com 60mg de a-metiltestosterona/kg, 38,6% de proteína digestível e 3.700 kcal de energia digestível/kg, de modo que a ração com inclusão de lisina foi isoaminoacídica para lisina em relação à ração sem a inclusão de FVA. O arraçoamento foi realizado quatro vezes ao dia, ad libitum. Ao final, foram avaliadas as médias de peso final (PF), comprimento total (CT), sobrevivência (SO) e efetividade de reversão (ER). Foi observado aumento linear no PF e CT com o aumento da inclusão da FVA na ração, enquanto, para SO, a ração sem FVA foi inferior às demais. As rações sem inclusão de FVA e com 20% de inclusão de lisina proporcionaram PF e CT médios inferiores e somente a ração sem FVA foi inferior para SO. Conclui-se que a FVA pode ser utilizada em rações para a tilápia do Nilo durante a reversão sexual.

Retratos do cotidiano: as mulheres do assentamento rural Santa Vitória

The present work shows trajectories of life of seated women agricultural, with the objective to apprehend on aspects to the experience of its sexuality. The daily one of the seated woman is constructed in a new space, called agricultural nesting whose formation if presents with proper singularity to a social and economic context and politician of the Great River of the North. Its passages of life are permeaty by different violences suffered in its daily one and its sexuality is weaveeed by a set of rules that the naturalization of the subordination of the woman in relation to the man keeps. The societies use the systems of the relations between men and women and transform the biological characteristic into activities human beings

Corpo e gestualidade :o jogo da capoeira e os jogos do conhecimento

In the direction of questing a sociology that considers the flesh dimension of the existence, that favors to think the body while place of the production of the knowledge, our itinerary of research is characterized for the reflection on the gesture of the body as power of life and production of knowledge, recognizing the precision of the gesture as a privileged breach of comment of the collective life, of the projection and registration of the culture, of the symbolic, of the sensitivity. Our problematic can be meet in the possibility to enhance an open and sensible rationality, tattooed in the body and accessible for the gestures, that its materialized in the relations of the human being with the other and the world, in singular and collective relations. Therefore, the gesture, constructed in the intention the experience of the body, can tell us about the human being, the society and the culture, therefore the sensed of the gestures is constructed from the established and recognized mutual actions for the citizens. It is in this field of production of the knowledge, of knowing of the meat that we direct our perception, in the challenge to immerge into the intention of the gesture in the capoeira game. Of the methodological point of view, for the analysis of the gestures of the capoeira, therefore, of the body as knowledge power, we consider registers of images as well as narratives registers of the universe of the capoeira, as well as my experience of more than seven years in the group of capoeira cordão de ouro1. A epistemological exercise has as support a qualitative research where parts of the quantity of images of the investigated group, as well as interviews, daily registers in of field and over all my experience of life next to the group and to the capoeira, in intention to recognize symbols tattooed in the body and for it produced in the inter subjectivists relations. We search therefore, to evidence sensible and meanings drawn for the gesture and evidenced by the look of the researcher. We presents as objectives of this inquiry to nuance ribbings around of the social and cultural elements in the production of the knowledge of the body, of the gesture, weaveeed for the sensible rationality

Remoção de matéria orgânica, de nutrientes e de coliformes no processo anaeróbio em dois estágios (reator compartimentado seguido de reator UASB) para o tratamento de águas residuárias de suinocultura

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Como se chega ou como nos tornamos docentes no Ensino Superior

The Thesis weaved in the (auto) biographical boarding studies the existence of existential teaching, in the scope of Superior Teaching, guided in the experience and the (auto) formative scope as a theoreticianmethodological support present in the classrooms, being three the essential questions: Which the way of (auto) formation traveled by professors of Superior Teaching, what is, for these citizens, the teaching in Superior Teaching and what they understand from existential teaching according to their narratives. The epistemology of this work, based on Program of After-Graduation in Education of Universidade Federal do Rio Grande do Norte, Support of Research: Professionalization and Formation Lecturing emerges, especially, of the studies and research realized by Ramalho and Nuñez (2005, 2006), Morosini (2001), Pimenta and Anastasiou (2002), Nóvoa (2000), Josso (2004), Dominicé (1988), Catani (2002), and Souza (2004), among other authors, yonder the educational practice exercised by researcher and involved citizens in inquiryformation, what it is confirmed from the three methodological tools that given support to the covered way: Eight topic narratives, a participantcomment and seven laboratories or parallel meeting of formation (EPF's) experimented with licensed teachers that actuate in superior teaching institutions (IES), public and private, localized in the city of Natal/RN. The Thesis points out, in this way, existential education in the guideline of viable and concrete methodological alternatives amongst the problematic of the (auto) formation faced for the professors in Superior Teaching

Frankenstein, o prometeu moderno ciência, literatura e educação

À partir des études de l'anthropologue Bruno Latour, dans lesquelles on montre l'importance de la rhétorique et des stratégies institutionnelles dans la fabrication des vérités scientifiques; des hypothèses concernant la nature ambiguë des sciences dressées par Isabelle Stengers et des idées d'Edgar Morin sur la nécessité de combattre la pensée fragmenteuse et de relier culture scientifique et culture humanistique, la thèse aborde la relation de l'homme avec ses artefacts, le défi des descriptions des phénomènes et de leurs propriétés, du dialogue entre les humains et les plusieures dimensions de la matière, et de la responsabilité qui devrait venir avec tous les progrès scientifiques. Victor Frankenstein, sa créature, Brown-Séquard et la testostérone synthétique, sont des acteurs qui aident à composer le panorama cognitif de la recherche qui étend les limites de la science et du social au collectif de non-humains et revendique une réforme de la pensée et de l'éducation que les inclut

Exercício em esteira não elevou a temperatura do casco de equinos

Objetivou-se avaliar em equino a influência do exercício progressivo e intenso realizado em esteira de alta velocidade sobre a temperatura de regiões da pele, incluindo face, pescoço e quartela, e do casco, incluindo coroa, parede e sola. Utilizaram-se cinco equinos Puro Sangue Árabes, desferrados, com idade média de 8±0,7 anos, sendo duas fêmeas e três machos, com peso corpóreo médio de 420±10kg. A intensidade de esforço foi determinada por meio da quantificação do lactato sanguíneo. As temperaturas foram determinadas com o auxílio de termógrafo, antes, durante e após o exercício. Realizou-se análise de variância seguida pelo teste de Tukey, sendo P≤0,05. A lactacidemia aumentou, principalmente nas velocidades intensas. Houve redução das temperaturas das regiões da face, pescoço e quartela após o exercício e diminuição das temperaturas da parede, coroa e sola do casco durante o exercício, enquanto a temperatura da manta de rolamento da esteira não se alterou em nenhum momento. Constatou-se indiretamente que a perfusão sanguínea do casco diminuiu durante o teste de esforço tanto em sua fase aeróbia como na anaeróbia. Nenhuma das intensidades de esforço foi capaz de alterar a temperatura da manta de rolamento da esteira. A temperatura do casco diminuída como decorrência fisiológica do esforço físico imposto, retornou aos valores normais após o término do exercício.