Drifting plasma collection by a positive biased tether wire in LEO-like plasma conditions: current measurement and plasma diagnostic

BETs is a three-year project financed by the Space Program of the European Commission, aimed at developing an efficient deorbit system that could be carried on board any future satellite launched into Low Earth Orbit (LEO). The operational system involves a conductive tape-tether left bare to establish anodic contact with the ambient plasma as a giant Langmuir probe. As a part of this project, we are carrying out both numerical and experimental approaches to estimate the collected current by the positive part of the tether. This paper deals with experimental measurements performed in the IONospheric Atmosphere Simulator (JONAS) plasma chamber of the Onera-Space Environment Department. The JONAS facility is a 9- m3 vacuum chamber equipped with a plasma source providing drifting plasma simulating LEO conditions in terms of density and temperature. A thin metallic cylinder, simulating the tether, is set inside the chamber and polarized up to 1000 V. The Earth's magnetic field is neutralized inside the chamber. In a first time, tether collected current versus tether polarization is measured for different plasma source energies and densities. In complement, several types of Langmuir probes are used at the same location to allow the extraction of both ion densities and electron parameters by computer modeling (classical Langmuir probe characteristics are not accurate enough in the present situation). These two measurements permit estimation of the discrepancies between the theoretical collection laws, orbital motion limited law in particular, and the experimental data in LEO-like conditions without magnetic fields. In a second time, the spatial variations and the time evolutions of the plasma properties around the tether are investigated. Spherical and emissive Langmuir probes are also used for a more extensive characterization of the plasma in space and time dependent analysis. Results show the ion depletion because of the wake effect and the accumulation of- ions upstream of the tether. In some regimes (at large positive potential), oscillations are observed on the tether collected current and on Langmuir probe collected current in specific sites.

Electrodynamic tether for scientific mission in low Jovian orbit

An electrodynamic bare tether is shown to allow carrying out scientific observations very close to Jupiter, for exploration of its surface and subsurface, and ionospheric and atmospheric in-situ measurements. Starting at a circular equatorial orbit of radius about 1.3/1.4 times the Jovian radius, continuous propellantless Lorentz drag on a thin-tape tether in the 1-5 km length range would make a spacecraft many times as heavy as the tape slowly spiral in, over a period of many months, while generating power at a load plugged in the tether circuit for powering instruments in science data acquisition and transmission. Lying under the Jovian radiation belts, the tape would avoid the most severe problem facing tethers in Jupiter, which are capable of producing both power and propulsion but, operating slowly, could otherwise accumulate too high a radiation dose . The tether would be made to spin in its orbit to keep taut; how to balance the Lorentz torque is discussed. Constraints on heating and bowing are also discussed, comparing conditions for prograde versus retrograde orbits. The system adapts well to the moderate changes in plasma density and motional electric field through the limited radial range in their steep gradients near Jupiter.

A review of electrodynamic tethers for space applications

Space applications of electrodynamic tethers, and basic issues and constraints on their operation are reviewed. The status of the bare-tether solution to the problem of effective electron collection from a rarefied magnetized plasma is revisited. Basic modes of tether operation are analyzed; design parameters and parametric domains where a bare electrodynamic tether is most efficient in deorbiting, rebooking, or power generation, are determined. Use of bare tethers for Radiation Belt Remediation and generation of electron beams for ionospheric research is considered. Teiher heating, arcing, and bowing or breaking, as well deployment strategies are discussed.

Caracterización experimental del centelleo troposférico en banda Ka

El presente Proyecto Fin de Grado tiene como objetivo el estudio y caracterización del centelleo troposférico en ausencia de lluvia en la banda Ka de un enlace Tierra-satélite. Para ello se dispondrá de un equipo receptor situado en la Escuela Técnica Superior de Ingenieros de Telecomunicación. Los datos son emitidos desde el satélite EutelSat Hot Bird 13A a una frecuencia de 19,7 GHz. La primera parte del proyecto comienza con las bases teóricas de los distintos fenómenos que afectan a la propagación de un enlace satélite, mencionando los modelos de predicción más importantes. Se ha dado más importancia al apartado perteneciente al centelleo troposférico por ser el tema tratado en este proyecto. El estudio cuenta con datos del satélite durante 7 años comprendidos entre julio de 2006 a junio de 2013. Después del filtrado y el resto del tratamiento adecuado de los datos se han obtenido distintas distribuciones estadísticas que están relacionadas con el centelleo como la varianza. Más tarde se ha comparado la varianza experimental con parámetros meteorológicos obtenidos desde distintas bases de datos. El objetivo de esto ha sido discernir cuál de estos factores afecta en mayor medida a la intensidad de centelleo. Para ello se ha realizado la correlación entre la varianza y varios parámetros meteorológicos: temperatura, humedad relativa, humedad absoluta, índice de refracción húmedo, presión… Además se han realizado medidas de nubosidad en los que se ha clasificado las muestras dependiendo del tipo de nube presente en el cielo. A continuación se ha calculado la varianza mensual media y distribuciones acumuladas de ciertos modelos de predicción de centelleo, comparándolos gráficamente con las curvas experimentales. Estos modelos usan parámetros medidos en superficie por lo que se utilizarán algunos de los parámetros analizados en el capítulo anterior. Por último se expondrán las conclusiones sacadas a lo largo de la realización del proyecto y las posibles líneas de investigación futuras. ABSTRACT. The present Project has as the principal aim the study and characterization of tropospheric scintillation in lack of rain in the band Ka of an Earth-satellite link. It is provided for a receptor equipment located in the ETSIT. The data are broadcasted form the Eutelsat Hot Bird 13A satellite at the frecuency of 19,7 GHz. The beginning of the project starts with the theorical basis of the different phenomenons that affects to the propagation of a satellite link, naming the most important predictions models. The chapter referred to the scintillation has had more importance due to be the main topic in this project. The study deals with satellite data during 7 years between July 2006 to June 2013. After the filter and others treatments of the data, it has been getting different statistics distributions related to scintillation like variance. Later, the experimental variance has been compared with meteorological parameters obtained from different datasets. The purpose has been to decide which factor affects in a greater way to the scintillation intensity. For that it has been doing the correlation between variance and meteorological parameters: temperature, relative humidity, absolute humidity, air refractivity due to water vapour, pressure… Moreover, it has been doing cloudiness measurements in which the samples have been classified in order to the kind of cloud shown in the sky at that moment. Then it has been calculated the monthly averaged variance and the prediction model for cumulative distributions which has been compared with the experimental results. That models uses surface data that they will be uses some meteorological parameters analyzed in previous chapters. Finally it will be shown the conclusions obtained along the realization of the project and the possible ways of future research.

Síntesis de series temporales de centelleo troposférico

Los sistemas de telecomunicación que trabajan en frecuencias milimétricas pueden verse severamente afectados por varios fenómenos atmosféricos, tales como la atenuación por gases, nubes y el centelleo troposférico. Una adecuada caracterización es imprescindible en el diseño e implementación de estos sistemas. El presente Proyecto Fin de Grado tiene como objetivo el estudio estadístico a largo plazo de series temporales de centelleo troposférico en enlaces de comunicaciones en trayecto inclinado sobre la banda Ka a 19,7 GHz. Para la realización de este estudio, se dispone como punto de partida de datos experimentales procedentes de la baliza en banda Ka a 19,7 GHz del satélite Eutelsat Hot Bird 13A que han sido recopilados durante siete años entre julio de 2006 y junio de 2013. Además, se cuenta como referencia teórica con la aplicación práctica del método UIT-R P.618-10 para el modelado del centelleo troposférico en sistemas de telecomunicación Tierra-espacio. Esta información permite examinar la validez de la aplicación práctica del método UIT-R P.1853-1 para la síntesis de series temporales de centelleo troposférico. Sobre este sintetizador se variará la serie temporal de contenido integrado de vapor de agua en una columna vertical por datos reales obtenidos de bases de datos meteorológicas ERA-Interim y GNSS con el objetivo de comprobar el impacto de este cambio. La primera parte del Proyecto comienza con la exposición de los fundamentos teóricos de los distintos fenómenos que afectan a la propagación en un enlace por satélite, incluyendo los modelos de predicción más importantes. Posteriormente, se presentan los fundamentos teóricos que describen las series temporales, así como su aplicación al modelado de enlaces de comunicaciones. Por último, se describen los recursos específicos empleados en la realización del experimento. La segunda parte del Proyecto se inicia con la muestra del proceso de análisis de los datos disponibles que, más tarde, permiten obtener resultados que caracterizan el centelleo troposférico en ausencia de precipitación, o centelleo seco, para los tres casos de estudio sobre los datos experimentales, sobre el modelo P.618-10 y sobre el sintetizador P.1853-1 con sus modificaciones. Al haber mantenido en todo momento las mismas condiciones de frecuencia, localización, clima y periodo de análisis, el estudio comparativo de los resultados obtenidos permite extraer las conclusiones oportunas y proponer líneas futuras de investigación. ABSTRACT. Telecommunication systems working in the millimetre band are severely affected by various atmospheric impairments, such as attenuation due to clouds, gases and tropospheric scintillation. An adequate characterization is essential in the design and implementation of these systems. This Final Degree Project aims to a long-term statistical study of time series of tropospheric scintillation on slant path communications links in Ka band at 19.7 GHz. To carry out this study, experimental data from the beacon in Ka band at 19.7 GHz for the Eutelsat Hot Bird 13A satellite are available as a starting point. These data have been collected during seven years between July 2006 and June 2013. In addition, the practical application of the ITU-R P.618-10 method for tropospheric scintillation modeling of Earth-space telecommunication systems has been the theoretical reference used. This information allows us to examine the validity of the practical application of the ITU-R P.1853-1 method for tropospheric scintillation time series synthesis. In this synthesizer, the time series of water vapor content in a vertical column will be substituted by actual data from meteorological databases ERA-Interim and GNSS in order to test the impact of this change. The first part of the Project begins with the exposition of the theoretical foundations of the various impairments that affect propagation in a satellite link, including the most important prediction models. Subsequently, it presents the theoretical foundations that describe the time series, and its application to communication links modeling. Finally, the specific resources used in the experiment are described. The second part of the Project starts with the exhibition of the data analysis process to obtain results that characterize the tropospheric scintillation in the absence of precipitation, or dry scintillation, for the three study cases on the experimental data, on the P.618-10 model and on the P.1853-1 synthesizer with its modifications. The fact that the same conditions of frequency, location, climate and period of analysis are always maintained, allows us to draw conclusions and propose future research lines by comparing the results.

Estudio experimental del centelleo troposférico en presencia de precipitación

Este Proyecto Fin de Grado tiene como objetivo realizar un estudio del centelleo troposférico en presencia de lluvia en la banda Ka. Para ello se han utilizado los datos obtenidos de un enlace Tierra-satélite mediante una estación receptora situada en la ETSIT UPM. En la primera parte de este proyecto, se ha realizado un estudio teórico, no demasiado profundo de los principales fenómenos que afectan a este tipo de enlaces, comentando algunos modelos de predicción y profundizando en el centelleo troposférico, ya que es el principal tema que se trata en este proyecto. En segundo lugar, se ha realizado el experimento. En la primera parte se ha comprobado que efectivamente se cumple el modelo de pendiente de -20 dB/dec debidos a la lluvia, todo ello procesando los datos que han sido tomados en la ETSIT mediante Matlab. En la segunda parte, se han tratado individualmente distintos tipos de eventos con el fin de determinar una frecuencia de corte adecuada para realizar la separación mediante filtrado de las componentes de lluvia respecto a las de centelleo, así como verificar el cumplimiento de la pendiente en el espectro de -26 dB/dec debida al centelleo. Posteriormente, una vez que se ha obtenido una frecuencia de corte adecuada para el filtro, he separado las componentes espectrales debidas al centelleo de las componentes debidas a la lluvia. Se ha obtenido la varianza de una serie de eventos, ya que es el parámetro que mejor caracteriza la intensidad del centelleo y la hemos comparado en los diferentes meses para observar su variación, ya que las lluvias de verano tienen asociadas la presencia de turbulencias mayores respecto a las de invierno. Para finalizar el proyecto, se han expuesto las conclusiones a las que hemos llegado mediante el mismo, comentando también las posibles líneas de investigación futuras. ABSTRACT. The aim of this Project is to make a study about tropospheric Scintillation in presence of rain in the Ka band. For this purpose, the data obtained in an Earth-satellite link by a receiving station located at ETSIT UPM will be used. In the first part of this project, a non-detailed theoretical study of the principal phenomena affecting this type of links has been performed, commenting some prediction models and deepening in tropospheric Scintillation, because this is the principal objective of this project. In the second part, the experiment has been completed. In the first part the fulfillment of -20 dB/dec of slope due to the rain has been proved, after processing the data obtained in the ETSIT using Matlab. In the second part different types of events have been treated in order to determine an adequate cut frequency with the purpose of separating by filtering the components of the rain from the components of scintillation as well as verifying the fulfillment of the slope in the spectrum of -26 dB/dec due to scintillation. Afterwards, once that one suitable cut frequency for the filter has been obtained, the components of scintillation respect to the components produced by rain have been separated. The variance of a series of events has been obtained, because it is the parameter that best characterizes the scintillation intensity and during the different months it has been compared with the objective of observing its variation, due to the higher association of summer rains to the presence of greater turbulences than during winter rains. To complete this project I have presented the final conclusions to which we have come, also commenting on the possible future lines of investigation.

Ca2+-independent inhibition of inositol trisphosphate receptors by calmodulin: Redistribution of calmodulin as a possible means of regulating Ca2+ mobilization

The interactions between calmodulin, inositol 1,4,5-trisphosphate (InsP3), and pure cerebellar InsP3 receptors were characterized by using a scintillation proximity assay. In the absence of Ca2+, 125I-labeled calmodulin reversibly bound to multiple sites on InsP3 receptors and Ca2+ increased the binding by 190% ± 10%; the half-maximal effect occurred when the Ca2+ concentration was 184 ± 14 nM. In the absence of Ca2+, calmodulin caused a reversible, concentration-dependent (IC50 = 3.1 ± 0.2 μM) inhibition of [3H]InsP3 binding by decreasing the affinity of the receptor for InsP3. This effect was similar at all Ca2+ concentrations, indicating that the site through which calmodulin inhibits InsP3 binding has similar affinities for calmodulin and Ca2+-calmodulin. Calmodulin (10 μM) inhibited the Ca2+ release from cerebellar microsomes evoked by submaximal, but not by maximal, concentrations of InsP3. Tonic inhibition of InsP3 receptors by the high concentrations of calmodulin within cerebellar Purkinje cells may account for their relative insensitivity to InsP3 and limit spontaneous activation of InsP3 receptors in the dendritic spines. Inhibition of InsP3 receptors by calmodulin at all cytosolic Ca2+ concentrations, together with the known redistribution of neuronal calmodulin evoked by protein kinases and Ca2+, suggests that calmodulin may also allow both feedback control of InsP3 receptors and integration of inputs from other signaling pathways.

Estudo com radioaerossol de DTPA Tecnécio-99m em pacientes portadores de pneumopatia por amiodarona

Com o objetivo de se avaliar a importância do \"clearance\" do dietilenotriamino-pentacetato marcado com Tecnécio 99m (DTPA-Tecnécio-99m) em portadores de pneumopatia por amiodarona foram estudados 40 indivíduos, em quatro grupos. Grupo I: 10 voluntários normais, assintomáticos e não fumantes (8 homens e 2 mulheres), com média de idade de 56,80 anos. Grupo II: 10 voluntários normais, assintomáticos e fumantes (6 homens e 4 mulheres ), com média de idade de 27,50 anos. Grupo III: 10 pacientes não fumantes ( 4 homens e 5 mulheres ), com média de idade de 52,90 anos. Todos faziam uso crônico de amiodarona por via oral. Grupo IV: 10 pacientes portadores de pneumopatia por amiodarona, quatro ex-fumantes, dois fumantes e quatro não fumantes ( 8 homens e 2 mulheres) com média de idade de 52,90 anos. Todos faziam uso de amiodarona por via oral e nenhum fumou nas 4 semanas que precederam o estudo. Após espirometria que constou do registro da curva volume-tempo, todos inalaram 4 ml de solução salina contendo 740 MBq de DTPA Tecnécio-99m, durante cinco minutos. Através de uma c~mara de cintilação computadorizada foram obtidas imagens pulmonares, definindo-se 9 áreas de interesse. Para cada região escolhida foi determinada uma curva de \"clearance\" extraindo-se o valor de meia-vida biológica em minu- tos ( T 1/2 ) e a taxa percentual de \" clearance\" alvéolo capilar do radioaerossol por minuto (K%/min). Observamos que, das variáveis espirométricas consideradas, a capacidade vital forçada (CVF) e o volume expiratório forçado no 1 segundo (VEF1) mostraram diferenças significantes entre os grupos I e IV. A contagem total de radioatividade de ambos os pulmões não mostrou relação com a CVF e o VEF1. O \" clearance \" pulmonar do DTPA Tecnécio-99m foi maior nos grupos 11 e IV, porém não permitindo sua diferenciação. Estes resultados permitem concluir: Os pacientes portadores de pneumonite por amiodaro- na apresentam\" clearance \" alvéolo-capilar de DTPA Tecnécio-99m significativamente maior que os indivíduos do grupo de normais não fumantes. Este fato também se verificou em relação aos pacientes em uso crônico de amiodarona mas sem evidências de pneumopatia. Não é possível diferenciar os fumantes dos portadores de pneumonite por amiodarona através da análise da integridade da barreira alvéolo-epitelial com DTPA Tecnécio-99m. Comparativamente, o estudo da integridade alvéolo-epitelial pelo \"clearance\" pulmonar de DTPA Tecnécio-99m é mais sensível que a espirometria na avaliação da pneumonite por amiodarona, permitindo diferenciar estes pacientes dos que fazem uso crônico da droga

A detector based on silica fibers for ion beam monitoring in a wide current range

A detector based on doped silica and optical fibers was developed to monitor the profile of particle accelerator beams of intensity ranging from 1 pA to tens of µA. Scintillation light produced in a fiber moving across the beam is measured, giving information on its position, shape and intensity. The detector was tested with a continuous proton beam at the 18 MeV Bern medical cyclotron used for radioisotope production and multi-disciplinary research. For currents from 1 pA to 20 µA, Ce3+ and Sb3+ doped silica fibers were used as sensors. Read out systems based on photodiodes, photomultipliers and solid state photomultipliers were employed. Profiles down to the pA range were measured with this method for the first time. For currents ranging from 1 pA to 3 µA, the integral of the profile was found to be linear with respect to the beam current, which can be measured by this detector with an accuracy of ∼1%. The profile was determined with a spatial resolution of 0.25 mm. For currents ranging from 5 µA to 20 µA, thermal effects affect light yield and transmission, causing distortions of the profile and limitations in monitoring capabilities. For currents higher than ∼1 µA, non doped optical fibers for both producing and transporting scintillation light were also successfully employed.

Pollen record and age determiation of sediments from the Labaz Lake area

Pollen records from perennially frozen sequences provide vegetation and climate reconstruction for the last 48,000 14C years in the central part of Taymyr Peninsula. Open larch forest with Alnus fruticosa and Betula nana grew during the Kargin (Middle Weichselian) Interstade, ca. 48,000-25,000 14C yr B.P. The climate was generally warmer and wetter than today. Open steppe-like communities with Artemisia, Poaceae, Asteraceae, and herb tundralike communities with dwarf Betula and Salix dominated during the Sartan (Late Weichselian) Stade, ca. 24,000-10,300 14C yr B.P. The statistical information method used for climate reconstruction shows that the coldest climate was ca. 20,000-17,000 14C yr B.P. A warming (Allerød Interstade?) with mean July temperature ca. 1.5°C warmer than today occurred ca. 12,000 14C yr B.P. The following cooling with temperatures about 3°-4°C cooler than present and precipitation about 100 mm lower corresponds well with the Younger Dryas Stade. Tundra-steppe vegetation changed to Betula nana-Alnus fruticosa shrub tundra ca. 10,000 14C yr B.P. Larch appeared in the area ca. 9400 14C yr B.P. and disappeared after 2900 14C yr B.P. Cooling events ca. 10,500, 9600, and 8200 14C yr B.P. characterized the first half of the Holocene. A significant warming occurred ca. 8500 14C yr B.P., but the Holocene temperature maximum was at about 6000-4500 14C yr B.P. The vegetation cover approximated modern conditions ca. 2800 14C yr B.P. Late Holocene warming events occurred at ca. 3500, 2000, and 1000 14C yr B.P. A cooling (Little Ice Age?) took place between 500 and 200 14C yr ago.