Caratterizzazione e testing di Sensori Hall Commerciali

Questa Tesi di Laurea si prefigge gli obiettivi di riuscire a caratterizzare i Sensori Hall e di testare un Sensore Hall di Asahi-Kasei, il CQ-3300, di cui l’Università di Bologna è in possesso. Per questa ragione si può dividere il processo di realizzazione della tesi in 2 fasi ben distinte: • Una prima fase dedicata interamente allo studio dell’argomento e alla ricerca online di Sensori Hall presenti sul mercato. Si è dunque approfondito il fenomeno fisico su cui essi basano il proprio funzionamento, le loro caratteristiche principali e le loro applicazioni. Se ne sono poi scelti due, oltre al CQ-3300, tra quelli presenti sul mercato per poterli caratterizzare e confrontare con il suddetto. • Una seconda fase dedicata ai test sul Sensore nel laboratorio di elettronica. Durante questa fase è stato montato su PCB (Printed Circuit Board) il sensore Hall CQ-3300 e sono stati realizzati dei circuiti di prova con lo scopo di verificare il corretto funzionamento del Sensore e l’effettiva banda di funzionamento. I tests in corrente alternata sono stati effettuati grazie all’ausilio di un generatore di corrente in grado di convertire un segnale in tensione in un segnale in corrente. Questo generatore di corrente però non può erogare un segnale in corrente di ampiezza maggiore a 1 Ampere, ragione per cui si è preferito tenersi alla larga da tale valore. L’Università di Bologna ritiene necessario testare questo sensore in termini di banda, in quanto ha progettato un Sensore Hall dalle caratteristiche simili in termini di banda di lavoro al componente in questione, il che rende importante capire se quest’ultimo tiene fede alla banda di lavoro che viene indicata sul suo datasheet, ovvero 1 MHz.

Caratterizzazione di sistemi di misura di corrente basati su sensori a Effetto Hall

Elaborato di tesi con lo scopo principale di creare una scheda di test migliorata per la caratterizzazione di sistemi di misura di corrente su sensori a Effetto Hall.

Symptomatic plate removal after treatment of facial fractures

AIMS: To identify the rates and reasons for plate removal (PR) among patients treated for facial fractures. MATERIALS AND METHODS: A retrospective review of files of 238 patients. RESULTS: Forty-eight patients (20.2%) had plates removed. The reason for removal was objective in 33.3% and subjective in 29.2%. The most common subjective reason was cold sensitivity, and the most common objective reason was wound dehiscence/infection. Women had PR for subjective reasons more often than men (p=0.018). Removal was performed more often for subjective reasons after zygomatico-orbital fractures than after mandibular fractures (p=0.002). Plates inserted in the mandible from an intraoral approach were removed more frequently than extraorally inserted mandibular plates, intraorally inserted maxillary plates, and extraorally inserted plates in other locations (p<0.001). Orbital rim plates had a higher risk of being removed than maxillary or frontal bone plates (p=0.02). CONCLUSIONS: Subjective discomfort is a notable reason for PR among Finnish patients, suggesting that the cold climate has an influence on the need for removal. Patients receiving mandibular osteosynthesis with miniplates from an intraoral approach are at risk of hardware removal because of wound dehiscence/infection and loose/broken hardware, reminding us that more rigid fixation devices should not be forgotten despite the widespread use of miniplates.

Adult Proximal Humerus Locking Plate for the Treatment of a Pediatric Subtrochanteric Femoral Nonunion: A Case Report

Nonunions of pediatric subtrochanteric femur fractures are exceedingly rare and have to date not been reported in the literature. We present the case of an 11-year-old boy who developed such a nonunion after open reduction internal fixation using a pediatric locked proximal femur plate. Using an adult proximal humerus locking plate, adequate proximal fixation of the nonunion was obtained. Furthermore, previously placed distal screw holes were safely bridged and the biomechanical environment around the nonunion site improved. Uneventful healing was possible with the use of adjuvant bone grafting. No short- or midterm complications occurred. Although other implants can certainly be adapted to a use different than that of its original design, the present case suggests that adult proximal humerus locking plates may be a safe option for revision surgery of the proximal pediatric femur.

Evidence Based Development of a Novel Lateral Fibula Plate (VariAx Fibula) Using a Real CT Bone Data Based Optimization Process During Device Development

Development of novel implants in orthopaedic trauma surgery is based on limited datasets of cadaver trials or artificial bone models. A method has been developed whereby implants can be constructed in an evidence based method founded on a large anatomic database consisting of more than 2.000 datasets of bones extracted from CT scans. The aim of this study was the development and clinical application of an anatomically pre-contoured plate for the treatment of distal fibular fractures based on the anatomical database. 48 Caucasian and Asian bone models (left and right) from the database were used for the preliminary optimization process and validation of the fibula plate. The implant was constructed to fit bilaterally in a lateral position of the fibula. Then a biomechanical comparison of the designed implant to the current gold standard in the treatment of distal fibular fractures (locking 1/3 tubular plate) was conducted. Finally, a clinical surveillance study to evaluate the grade of implant fit achieved was performed. The results showed that with a virtual anatomic database it was possible to design a fibula plate with an optimized fit for a large proportion of the population. Biomechanical testing showed the novel fibula plate to be superior to 1/3 tubular plates in 4-point bending tests. The clinical application showed a very high degree of primary implant fit. Only in a small minority of cases further intra-operative implant bending was necessary. Therefore, the goal to develop an implant for the treatment of distal fibular fractures based on the evidence of a large anatomical database could be attained. Biomechanical testing showed good results regarding the stability and the clinical application confirmed the high grade of anatomical fit.

Femoral morphology and epiphyseal growth plate changes of the hip during maturation: MR assessments in a 1-year follow-up on a cross-sectional asymptomatic cohort in the age range of 9-17 years

The goal of this prospective study was to characterize the morphology and physeal changes of the femoral head during maturation using MRI in a population-based group of asymptomatic volunteers.

Use of a 1.5 mm butterfly locking plate for stabilization of atlantoaxial pathology in three toy breed dogs

The objective of this study was to describe the use of a titanium 1.5 mm locking plate in the stabilization of atlantoaxial pathology in three toy breed dogs. Two dogs with atlantoaxial subluxation and another dog with an axial fracture, confirmed by diagnostic imaging, were stabilized via a ventral approach with a 1.5 mm titanium 5-hole locking butterfly-plate. Surgical reduction and stabilization were assessed by computed tomography and radiography after surgery. Follow-up evaluation for resolution of neurological signs and possible complications was performed in all three dogs. For long-term assessment, a telephone follow-up was performed. A considerable improvement of neurological signs occurred within two to four weeks after surgery. An excellent clinical outcome was identified in all three patients. Adequate stabilization and resolution of neurological signs in all three dogs was achieved. The stabilization of atlantoaxial surgical conditions in toy breeds with the 1.5 mm titanium 5-hole butterfly locking plate appears to be an effective means of surgical treatment.

The Locking Compression Paediatric Hip Plate: technical guide and critical analysis

Osteotomies of the proximal femur and stable fixation of displaced femoral neck fractures are demanding operations. An LCP Paediatric Hip Plate was developed to make these operations safer and less demanding. The article focuses on the surgical technique and critically analyses the device.

Building the New Society in the Shell of the Old: Finnish-Canadian Hall Socialism and the Canadian Industrial Unionist Support League

The literature on Finnish immigrant working-class movements in North America frequently makes reference to the phenomenon of "hall socialism," so-called because of the central position that the socialist or labor hall occupied in the political, associational, and cultural life of many Finnish communities throughout the twentieth-century. In the 1930s, over 80 such Finnish halls were spread across Canada, and many people associated with these halls vigorously supported the mission of organized labor. This paper will examine the history, ideas, and practices of the Industrial Workers of the World-influenced Canadan Teollisuusunionistien Kannatus Liitto (CTKL; Canadian Industrial Unionist Support League), and its connections to Finnish Canadian hall socialism. The paper will consider the role of the CTKL in supporting workers' struggles, the significance of the hall as a part of the infrastructural bedrock that sustained this support, and the broader interaction between social and radical organizing commitments.

Lessons Learned from 'Hall of Socialism': Juxtaposing Finnish-American Radicalism with Today's Protest Movements

Historical accounts of revolutionary movements oftentimes occlude the pleasures of countering hegemony or criticize the “frivolity” of what is perceived to be non-political activities. However, turn of the century Finnish-American socialist theater clubs and early twentieth century Finnish-American communist halls and their uncounted social groups and activities prove to be a rich resource in reconsidering the importance of acknowledging and understanding the role that pleasure has played and should play in political protest. Finnish-American radical activities, especially those condemned already at the time as hall socialism, are important historical precedents to today’s alter-globalization student festivals and protest concerts, midnight raves

Comparison of modal analysis results of laser vibrometry and nearfield acoustical holography measurements of an aluminum plate

Noise and vibration has long been sought to be reduced in major industries: automotive, aerospace and marine to name a few. Products must be tested and pass certain levels of federally regulated standards before entering the market. Vibration measurements are commonly acquired using accelerometers; however limitations of this method create a need for alternative solutions. Two methods for non-contact vibration measurements are compared: Laser Vibrometry, which directly measures the surface velocity of the aluminum plate, and Nearfield Acoustic Holography (NAH), which measures sound pressure in the nearfield, and using Green’s Functions, reconstructs the surface velocity at the plate. The surface velocity from each method is then used in modal analysis to determine the comparability of frequency, damping and mode shapes. Frequency and mode shapes are also compared to an FEA model. Laser Vibrometry is a proven, direct method for determining surface velocity and subsequently calculating modal analysis results. NAH is an effective method in locating noise sources, especially those that are not well separated spatially. Little work has been done in incorporating NAH into modal analysis.