Influence of PH3 exposure on silicon substrate morphology in the MOVPE growth of III-V on silicon multijunction solar cells

Dual-junction solar cells formed by a GaAsP or GaInP top cell and a silicon bottom cell seem to be attractive candidates to materialize the long sought-for integration of III-V materials on silicon for photovoltaic applications. One of the first issues to be considered in the development of this structure will be the strategy to create the silicon emitter of the bottom subcell. In this study, we explore the possibility of forming the silicon emitter by phosphorus diffusion (i.e. exposing the wafer to PH3 in a MOVPE reactor) and still obtain good surface morphologies to achieve a successful III-V heteroepitaxy as occurs in conventional III-V on germanium solar cell technology. Consequently, we explore the parameter space (PH3 partial pressure, time and temperature) that is needed to create optimized emitter designs and assess the impact of such treatments on surface morphology using atomic force microscopy. Although a strong degradation of surface morphology caused by prolonged exposure of silicon to PH3 is corroborated, it is also shown that subsequent anneals under H-2 can recover silicon surface morphology and minimize its RMS roughness and the presence of pits and spikes.

Development and experimental evaluation of a complete solar thermophotovoltaic system

We present a practical implementation of a solar thermophotovoltaic (TPV) system. The system presented in this paper comprises a sunlight concentrator system, a cylindrical cup-shaped absorber/emitter (made of tungsten coated with HfO2), and an hexagonal-shaped water-cooled TPV generator comprising 24 germanium TPV cells, which is surrounding the cylindrical absorber/emitter. This paper focuses on the development of shingled TPV cell arrays, the characterization of the sunlight concentrator system, the estimation of the temperature achieved by the cylindrical emitters operated under concentrated sunlight, and the evaluation of the full system performance under real outdoor irradiance conditions. From the system characterization, we have measured short-circuit current densities up to 0.95 A/cm2, electric power densities of 67 mW/cm2, and a global conversion efficiency of about 0.8%. To our knowledge, this is the first overall solar-to-electricity efficiency reported for a complete solar thermophotovoltaic system. The very low efficiency is mainly due to the overheating of the cells (up to 120 °C) and to the high optical concentrator losses, which prevent the achievement of the optimum emitter temperature. The loss analysis shows that by improving both aspects, efficiencies above 5% could be achievable in the very short term and efficiencies above 10% could be achieved with further improvements.

Ge/Si ratios in marine siliceous microfossils

A procedure is presented to separate diatoms and radiolaria from marine sediments and from each other, to purify them of elements associated with other phases, and to dissolve them to determine their elemental composition. The cleaning procedure eliminates artifacts due to the presence of detrital clays and the high sorption capacity of hydrated silica. The concentration of trace elements (Al, Fe, Mg, and Ba) that we find in alkaline dissolutions of clean diatoms are at least an order of magnitude lower than previously reported. The overall long-term precision in the determination of Ge/Si in a sub-standard of clean diatoms is ±0.024 * 10**-6 (1 sigma). Ge/Si measured in diatoms and radiolaria from core tops indicates that high-latitude Holocene diatoms accurately record the present-day oceanic Ge/Si, while radiolarian ratios are systematically lower and display more scatter. Evaluation of Ge/Si in diatoms and radiolaria from Hole DSDP 265 (Plio-Pleistocene) suggests that post-depositional alteration of the ratio does not occur at this site, but the average ratio carried by diatoms over this time interval was lower than that in the present ocean.