Variable-speed-drive-based detection methods for problems in fluid handling systems

Fluid handling systems account for a significant share of the global consumption of electrical energy. They also suffer from problems, which reduce their energy efficiency and increase life-cycle costs. Detecting or predicting these problems in time can make fluid handling systems more environmentally and economically sustainable to operate. In this Master’s Thesis, significant problems in fluid systems were studied and possibilities to develop variable-speed-drive-based detection methods for them was discussed. A literature review was conducted to find significant problems occurring in fluid handling systems containing pumps, fans and compressors. To find case examples for evaluating the feasibility of variable-speed-drive-based methods, queries were sent to industrial companies. As a result of this, the possibility to detect heat exchanger fouling with a variable-speed drive was analysed with data from three industrial cases. It was found that a mass flow rate estimate, which can be generated with a variable speed drive, can be used together with temperature measurements to monitor a heat exchanger’s thermal performance. Secondly, it was found that the fouling-related increase in the pressure drop of a heat exchanger can be monitored with a variable speed drive. Lastly, for systems where the flow device is speed controlled with by a pressure measurement, it was concluded that increasing rotational speed can be interpreted as progressing fouling in the heat exchanger.

Remote Observation of Radioactive Permit-Required Confined Spaces – Case: Posiva Oy’s Fuel Handling Cell

Posiva Oy’s final disposal facility’s encapsulation plant will start to operate in the 2020s. Once the operation starts, the facility is designed to run more than a hundred years. The encapsulation plant will be first of its kind in the world, being part of the solution to solve a global issue of final disposal of nuclear waste. In the encapsulation plant’s fuel handling cell the spent nuclear fuel will be processed to be deposited into the Finnish bedrock, into ONKALO. In the fuel handling cell, the environment is highly radioactive forming a permit-required enclosed space. Remote observation is needed in order to monitor the fuel handling process. The purpose of this thesis is to map (Part I) and compare (Part II) remote observation methods to observe Posiva Oy’s fuel handling cell’s process, and provide a possible theoretical solution for this case. Secondary purpose for this thesis is to provide resources for other remote observation cases, as well as to inform about possible future technology to enable readiness in the design of the encapsulation plant. The approach was to theoretically analyze the mapped remote observation methods. Firstly, the methods were filtered by three environmental challenges. These are the high levels of radiation, the permit-required confined space and the hundred year timespan. Secondly, the most promising methods were selected by the experts designing the facility. Thirdly, a customized feasibility analysis was created and performed on the selected methods to rank the methods with scores. The results are the mapped methods and the feasibility analysis scores. The three highest scoring methods were radiation tolerant camera, fiberscope and audio feed. A combination of these three methods was given as a possible theoretical solution for this case. As this case is first in the world, remote observation methods for it had not been thoroughly researched. The findings in this thesis will act as initial data for the design of the fuel handling cell’s remote observation systems and can potentially effect on the overall design of the facility by providing unique and case specific information. In addition, this thesis could provide resources for other remote observation cases.

Trends in fish prey capture by common terns following zebra mussel invasion : do terns track fish species abundance? /

The Common Tern (Sterna hirundo) is a ground nesting colonial seabird. Terns rely primarily on small prey fishes which they obtain through plunge diving for their survival as well as the survival of their offspring during the breeding season. The zebra mussel (Dreissena polymorpha) is a small bivalve mollusk that invaded North American waters in the late 1980's. Through its suspension feeding, the zebra mussel has the ability to alter the entire aquatic ecosystem, ultimately leading to a reduction in pelagic organisms including small prey fish. The objective of the study was to determine what (if any) indirect effects the invasion of the zebra mussel has had on fish prey captured by terns. The study took place in two separate two-year periods, 1990-91 and 1995-96 on a concrete breakwall off the north shore of Lake Erie near Port Colborne, Ontario. Daily nest checks revealed clutch initiation dates, egg-laying chronology, hatching success and morphological egg characteristics (length and breadth). Behavioural observations included time each sex spent in attendance with its brood, the frequency of feeding chicks and the prey species composition and size fed to chicks as well as to females (courtship feeding). Egg sizes did not differ between study periods, nor did feeding rates to chicks, suggesting that food was not a limiting resource. Terns spent less time with their broods (more time foraging) in the 1995-96 period. However, they also had significantly larger broods and fledged more offspring. The time of each individual foraging trip decreased, suggesting that fish were easier to obtain in 1995 and 1996. Lastly, kleptoparasitism rates decreased, suggesting that the costs of foraging (time, energy) actually decreased as fewer birds adopted this strategy to compensate for what I assumed to be a lack of available food (fish). The only significant difference between the periods of 1990, 1991 and 1995, 1996 was a change in diet. Terns delivered significantly fewer rainbow smelt and more emerald shiner in 1995 and 1996. However, the average size of fish delivered did not change. Thus, there was little impact on prey captured by Common Terns in Lake Erie since the invasion of the zebra mussel.

Water quality and fish populations of the Welland River, Ontario /

The water quality and fish populations of the Welland River were observed to decline with distance downstream. This coincided with increased agricultural , domestic and industrial waste loadings. The river upstream of the City of Welland received considerable loadings from agricultural sources. Centrarchids, sciaenids, ictalurids, cyprinids and esocids characterized this upper section of the river. Most of these species were tolerant of low dissolved oxygen concentrations and the high turbidity which prevailed there . The river near Port Robinson receives many industrial and domestic wastes as evidenced by the water quality data. The fish in this section were less abundant and the observed population was comprised almost solely of cyprinids. Further downstream, near Montrose, the Welland River received shock loads of chemical wastes that exceeded a specific conductance of ISiOOO ;umhos/cm. Few fish were captured at this site and those that were captured were considered to be transients. A review of the literature revealed that none of the common indices of water quality in use today could adequately predict the observed distributions. In addition to the above, the long-term trend (l3 yrs) of water quality of the lower Welland River revealed a gradual improvement. The major factor thought to be responsible for this improvement was the operation of the Welland Sewage Treatment Plant. The construction of the New Welland Ship Canal coincided with large fluctuations of the total solids and other parameters downstream. These conditions prevailed for a maximum of three years (1972- 1975)' Furthermore, spawning times and temperatures, geographic distributions, length-weight regressions and many other descriptive aspects of the ecology of some 26 species/ taxa of fish were obtained. Several of these species are rare or new to southern Ontario.

Livestock Behavior as Related to Handling Facilities Design

This article is from the International Journal for the Study of Animal Problems, Vol. 1, No. 1, 1980. The article focuses on the "behavior of different species of livestock as well as different breeds" to aid with the design of handling facilities.

Serpentine Cattle Chute Gives Handling Advantages

The article discusses the efficiency of a curved chute as opposed to a straight chute when leading cattle into a conveyor restrainer. The article was published in The National Provisioner in 1984.

Assessment of Stress During Handling and Transport

The article focuses on assessing the stress levels of animals when transported and handled. The paper was presented at a symposium titled Effects of Stress in Farm Animals at the American Society of Animal Science 87th annual meeting, July 1995.

Livestock Handling Guide

The contents of the pamphlet include: Handling Stress, Understanding Animal Psychology, Handling Facility Design Tips, Bruise Losses By Species, Preventing Bruises, Loading Chute Recommendations.

Progress and Challenges in Animal Handling and Slaughter in the U.S.

The article discusses the McDonald's Corporation audit and the ways to improve the handling of livestock on the way to slaughter.

Safe Handling of Large Animals

The article discusses improving welfare by reducing fear by studying: Animal Sensory Perception, Animal Behavior Patterns, Animal Habituation and Temperament, Effects of Previous Handling, Training Animals, Training Time and Temperament, Genetic Effects on Handling, Handling of escaped Animals, Facilities, Aggression in Grazing Animals, Inherent Danger of Large Animals, Cattle and Car Accidents.

Designing Meat Packing Plant Handling Facilities for Cattle and Hogs

The focus is on design, more specifically, "animal handling facilities which are labor saving and reduce bruise losses". The article studies: Unloading Chutes, Stockyard Design, Hog Plant Stockyard, General Purpose Small Stockyard, Beef Stockyard, Cattle Crowding Pens, Hog Crowding Pens, Slopes in Chutes and Crowding Pens, Single File Chutes General Recommendations, Single File Chutes for Cattle, Slaughter Restrainers,

Reduce Stress of Handling to Improve Productivity of Livestock

The article focuses on stress factors, which include: Genetic Background, Individual Differences, Past Experiences. The conclusion of the article states "reducing handling stress of animals will improve their weight gain, reproductive performance, and ability to resist disease".

Livestock Handling Needs Improvement

The article discusses problems with the handling of livestock and the conclusion of the article states "rough handling of livestock is not only inhumane, but can cause excessive losses due to sickness and slower growth...careful handling of livestock in all phases of production is prerequisite to a profitable business".

Double Rail Restrainer for Handling Beef Cattle

The summary of the article reads "A new double rail conveyor restrainer for handling cattle at the slaughter plant is described. It has improved safety and ergonomics compared to the V restrainer conveyor it replaces. Cattle ride astride a moving conveyor. This design could also be adapted for veterinary work."