Validação dos parâmetros aeróbio e anaeróbio a partir de protocolo não invasivo aplicado ao exercício resistido - supino reto

The purpose of this study was to investigate the validity of critical force test from maximal lactate steady state (MLSS) during resistance test using straight bench press. Five healthy male volunteers aged (22.6 ± 2.88 years), weight (76.3 ± 11.49 kg) e height (182.6 ± 7.54cm), trained in resistance exercise, and performed four diferent test to determine: one maximal effort (1RM), critical force using the critical power model (force vs 1/time limit - 20, 25 and 30% 1RM). The CF was the linear coefficient and the anaerobic impulse capacity (CIA) was the angular. MLSS was determined using loads of 80, 90, 100 and 110% of critical force. Blood lactate samples were abtained at each 300sec between each stage of total 1200sec. Maximal 30s test (M30) was accomplished with load of 25% of body weight in SBP. The results showed that the 1 RM was 79.4 Kgf (± 16.98), CF 10.1N (± 2.25), CIA 1756.82 N.s (± 546.96) and the R² 0.984 (± 0,02). The MLSS occurs at 100% CF load. The lactate concentration at the MLSS was 2.2 mmol/L (± 0.77). Significant correlation was observed between MLSS and CF on SBP (r = 0.88 p = 0.05). In M30 the minimum, mean and peak power were (25.0 ± 4.9, 28.0 ± 4.9, and 30.0 ± 4.6 kgf.rps, respectively). The fatigue index was 18.0% (± 6,8). The M30 was significantly correlated with Ppeak and Pmean (r = 0.98 for both, p = 0.003). The CF means has been validated to predict the resistance training and the CIA show to be a representative anaerobic parameter in straight bench press.

Manejo pré-abate de bovinos

The pre-slaughter moment begins with the animal´s loading on the farm and ends up in its drain. It is a period in which the animal is under physical stress caused by hunger, thirst, fatigue, injuries, and extremes of temperature and psychological stress, due to restraint, handling, innovation and fear. Stress and inappropriate handling bring bad consequences for the final product´s quality, requiring better handling conditions, facilities and equipment. Examples of consequences of mishandling: meat with abnormal color, DFD meat (dark, firm and dry), reduced product´s shelf life, bruises and broken bones in carcasses. The operators should be trained and oriented on the basic principles of biology, behavior and management of cattle. At every step of the pre-slaughter moment, the animals should be handled calmly and quietly to avoid excitement and stress. Operators should avoid shouting, whistling or any noise since cattle have very sensitive ears and can become stressed. If the animals refuse to move, the cause of the problem should be determined

Validação de uma escala colorida de esforço percebido para adultas jovens e idosas em caminhada na esteira

The perceived exertion has been used for the intensity control and exercise prescription. Among the various scales that estimate the perceived exertion, the Borg’s RPE scale is one of the best known. However, for populations with low levels of schooling or with visual difficulties such as the elderly, the application of these scales becomes more difficult. In previous studies, a color scale of perceived exertion was developed to aim for assistance in application of the scale and interpretation of perceived exertion. This scale showed high correlation with the Borg’s scale and proved to be valid to estimate the perceived exertion. Thereby, the aim of this study was to assess the validity of the color scale of perceived exertion to measure the perceived exertion in adult women of different ages. Participated in the study 12 young adult women with age of 21,7 ± 1,5 years old, and 10 elderly women with age of 60,3 ± 3,5 years old. The participants were submitted to an incremental exercise of treadmill walking with stages of 2 minutes duration. The inicial load was 5,5 km/h and inclination of 6% for young women and 2% for elderly women, both with 2% increments at each stage completed, without changing the speed. Heart rate and oxygen comsuption responses were determined at the 30 finals seconds of each stage. At the 60 finals seconds of each stage participants indicated the perceived exertion for the overall body, for the legs and for the chest, primarily in the color scale and following in the tradicional Borg’s scale. The analysis of variance for repeated measures was used to assess the effect of different loads on the perceived exertion and physiological responses. The correlations betwen physiological variables, color scale and Borg’s scale were analyzed in group and individually. In all analysis the significance...(Complete abstract click electronic access below)

Efeitos do exercício aeróbio prévio sobre a taxa de desenvolvimento de força em indivíduos ativos

Clicar acesso eletrônico abaixo.

Modelagem e simulação do mecanismo biela manivela e análise estrutural de biela automotiva

Nowadays, the automotive industry is working to optimize the design of engines, in order to reduce the fuel consumption with acceptable efficiency ratio. This undergraduate thesis is aimed at perform a kinematic/dynamic analysis of a slider-crank mechanism that is part of a four stroke internal combustion engine, the same engine that was used in the analysis described by Montazersadhd and Fatemi (2007). Two algorithms were developed based on Kane’s method to calculate velocities and accelerations of the mechanism bodies, and provide the acting forces at connecting rod joints. A SimMechanics model was developed to simulate the engine, and monitoring the same parameters that were calculated with the algorithms. The results obtained with both approaches were satisfactory and showed good agreement with the values provided by Montazersadhd and Fatemi (2007). The obtained results showed that the axial component of the rod joint efforts was caused by the pressure exerted on the piston head,whereas the radial component was related with the action of inertia loads. Besides, this thesis presents a connecting rod assembly mesh that is going to be used for static and fatigue finite element analysis in the future

Caracterização microestrutural de junta soldada com arco submerso e análise da propagação de trincas em um tubo de aço API X 70

In this work a study of an API 5L X70 steel, which is used in the manufacture of oil and gas pipelines, has been made. This class of steel show high strength and ductility values, and has been increasingly studied due the growing demand of oil and natural gas, which in consequence, increases the needing of new pipelines to transport them. The material studied has been directly taken from a tube provided by TenarisConfab, and a special attention has been given to the fatigue crack growth rate study, which proved that a crack will grow at different rates according to the tube position where it is growing

Desenvolvimento de aplicativo de análise técnica e econômica para adaptação de uma roda d’água acionada por cima para geração de energia elétrica no meio rural

The steel type AISI 4130 (ultra-high strength steel) is an alloy of low carbon and its main alloying elements are chromium and molybdenum, which improves the toughness of the weld metal. It has numerous applications, especially where the need for high mechanical strength. It is widely used in equipment used by the aviation industry, such as cradle-tomotor, and this is the motivation for this study. Cots are of fundamental importance, because the engine supports and maintains balance in the fixed landing gear. This equipment is subjected to intense loading cycles, whose fractures caused by fatigue are constantly observed. Will be determined the effects caused by re-welding the structure of aeronautical equipment, and will also study the microstructure of the metal without welding. The studies will be done on materials used in aircraft, which was given to study. The results provide knowledge of microstructure to evaluate any type of fracture that maybe caused by fatigue. Fatigue is a major cause of aircraft accidents and incidents occurred, which makes the study of the microstructure of the metal, weld and re-solder the knowledge essential to the life of the material. The prevention and control of the process of fatigue in aircraft are critical, since the components are subjected to greater responsibility cyclic loading

Análise de parâmetros nutricionais e metabólicos de jogadores de futebol suplementados com suco de laranja

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Avaliação da influência do formato da porca e da pré-carga em juntas aparafusadas em tração

Many structures and mechanical equipment requires a union member, and the screw is one of the most used, the cost is low, it is versatile and easy to find on the market. The resulting pre-load assembly torque associated with the cyclical external load has great influence, so it will be studied carefully. This study analyzed some of these factors, as the format of nuts, and the washer material when they are incompatible with the bolt material can cause a reduction in life of the joint fatigue

Efeito da aplicação de filmes de carbono tipo diamante por plasma no destorque de pilares de implantes com conexões cônicas internas

Pós-graduação em Odontologia Restauradora - ICT

Avaliação da qualidade de vida de pacientes portadores de hepatopatias

Pós-graduação em Odontologia Preventiva e Social - FOA

A política como incômodo

This article holds that the dominant scene of the “crisis of politics” in modern societies reflects a complex process of reconfiguration of social life and way of living. Through critical dialogue with some representatives of political sociology of radicalized modernity, it suggests that current failure of politics is the failure of one way of doing and thinking about politics, direct heir of “historical capitalism”. It is not the failure of politics as such, but of a mode of politics, political system, political practice. It must be associated with a sort of fatigue of the material which composed modern politics, which has always been based on strong national and constitutional states, on mass parties and active parliaments, as well as on the efficient functioning of representative democracies.

Probabilidade de falha de coroas com infraestrutura em zircônia com diferentes geometrias

Pós-graduação em Odontologia Restauradora - ICT

Influência de tratamentos de superfície e agentes cimentantes na sobrevivência de coroas de Y-TZP recobertas por porcelana

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Utilização de metaheurísticas combinada a diferentes métodos de aglutinação para a otimização de um processo de torneamento com múltiplas respostas

Pós-graduação em Engenharia Mecânica - FEG