Dynamic Changes in the Mental Rotation Network Revealed by Pattern Recognition Analysis of fMRI Data

We investigated the temporal dynamics and changes in connectivity in the mental rotation network through the application of spatio-temporal support vector machines (SVMs). The spatio-temporal SVM [Mourao-Miranda, J., Friston, K. J., et al. (2007). Dynamic discrimination analysis: A spatial-temporal SVM. Neuroimage, 36, 88-99] is a pattern recognition approach that is suitable for investigating dynamic changes in the brain network during a complex mental task. It does not require a model describing each component of the task and the precise shape of the BOLD impulse response. By defining a time window including a cognitive event, one can use spatio-temporal fMRI observations from two cognitive states to train the SVM. During the training, the SVM finds the discriminating pattern between the two states and produces a discriminating weight vector encompassing both voxels and time (i.e., spatio-temporal maps). We showed that by applying spatio-temporal SVM to an event-related mental rotation experiment, it is possible to discriminate between different degrees of angular disparity (0 degrees vs. 20 degrees, 0 degrees vs. 60 degrees, and 0 degrees vs. 100 degrees), and the discrimination accuracy is correlated with the difference in angular disparity between the conditions. For the comparison with highest accuracy (08 vs. 1008), we evaluated how the most discriminating areas (visual regions, parietal regions, supplementary, and premotor areas) change their behavior over time. The frontal premotor regions became highly discriminating earlier than the superior parietal cortex. There seems to be a parcellation of the parietal regions with an earlier discrimination of the inferior parietal lobe in the mental rotation in relation to the superior parietal. The SVM also identified a network of regions that had a decrease in BOLD responses during the 100 degrees condition in relation to the 0 degrees condition (posterior cingulate, frontal, and superior temporal gyrus). This network was also highly discriminating between the two conditions. In addition, we investigated changes in functional connectivity between the most discriminating areas identified by the spatio-temporal SVM. We observed an increase in functional connectivity between almost all areas activated during the 100 degrees condition (bilateral inferior and superior parietal lobe, bilateral premotor area, and SMA) but not between the areas that showed a decrease in BOLD response during the 100 degrees condition.

The value of a saved tree : The lifecycle of CO2-emissions associated with the combination of printing paper and electricity production of wood in the U.S. and Sweden

The pulp- and paper production is a very energy intensive industry sector. Both Sweden and the U.S. are major pulpandpaper producers. This report examines the energy and the CO2-emission connected with the pulp- and paperindustry for the two countries from a lifecycle perspective.New technologies make it possible to increase the electricity production in the integrated pulp- andpaper mill through black liquor gasification and a combined cycle (BLGCC). That way, the mill canproduce excess electricity, which can be sold and replace electricity produced in power plants. In thisprocess the by-products that are formed at the pulp-making process is used as fuel to produce electricity.In pulp- and paper mills today the technology for generating energy from the by-product in aTomlinson boiler is not as efficient as it could be compared to the BLGCC technology. Scenarios havebeen designed to investigate the results from using the BLGCC technique using a life cycle analysis.Two scenarios are being represented by a 1994 mill in the U.S. and a 1994 mill in Sweden.The scenariosare based on the average energy intensity of pulp- and paper mills as operating in 1994 in the U.S.and Sweden respectively. The two other scenarios are constituted by a »reference mill« in the U.S. andSweden using state-of-the-art technology. We investigate the impact of varying recycling rates and totalenergy use and CO2-emissions from the production of printing and writing paper. To economize withthe wood and that way save trees, we can use the trees that are replaced by recycling in a biomassgasification combined cycle (BIGCC) to produce electricity in a power station. This produces extra electricitywith a lower CO2 intensity than electricity generated by, for example, coal-fired power plants.The lifecycle analysis in this thesis also includes the use of waste treatment in the paper lifecycle. Both Sweden and theU.S. are countries that recycle paper. Still there is a lot of paper waste, this paper is a part of the countries municipalsolid waste (MSW). A lot of the MSW is landfilled, but parts of it are incinerated to extract electricity. The thesis hasdesigned special scenarios for the use of MSW in the lifecycle analysis.This report is studying and comparing two different countries and two different efficiencies on theBLGCC in four different scenarios. This gives a wide survey and points to essential parameters to specificallyreflect on, when making assumptions in a lifecycle analysis. The report shows that there arethree key parameters that have to be carefully considered when making a lifecycle analysis of wood inan energy and CO2-emission perspective in the pulp- and paper mill in the U.S. and in Sweden. First,there is the energy efficiency in the pulp- and paper mill, then the efficiency of the BLGCC and last theCO2 intensity of the electricity displaced by BIGCC or BLGCC generatedelectricity. It also show that with the current technology that we havetoday, it is possible to produce CO2 free paper with a waste paper amountup to 30%. The thesis discusses the system boundaries and the assumptions.Further and more detailed research, including amongst others thesystem boundaries and forestry, is recommended for more specificanswers.

Acceptability of home-assessment post medical abortion and medical abortion in a low-resource setting in Rajasthan, India : Secondary outcome analysis of a non-inferiority randomized controlled trial

Background: Studies evaluating acceptability of simplified follow-up after medical abortion have focused on high-resource or urban settings where telephones, road connections, and modes of transport are available and where women have formal education. Objective: To investigate women's acceptability of home-assessment of abortion and whether acceptability of medical abortion differs by in-clinic or home-assessment of abortion outcome in a low-resource setting in India. Design: Secondary outcome of a randomised, controlled, non-inferiority trial. Setting Outpatient primary health care clinics in rural and urban Rajasthan, India. Population: Women were eligible if they sought abortion with a gestation up to 9 weeks, lived within defined study area and agreed to follow-up. Women were ineligible if they had known contraindications to medical abortion, haemoglobin < 85mg/l and were below 18 years. Methods: Abortion outcome assessment through routine clinic follow-up by a doctor was compared with home-assessment using a low-sensitivity pregnancy test and a pictorial instruction sheet. A computerized random number generator generated the randomisation sequence (1: 1) in blocks of six. Research assistants randomly allocated eligible women who opted for medical abortion (mifepristone and misoprostol), using opaque sealed envelopes. Blinding during outcome assessment was not possible. Main outcome measures: Women's acceptability of home-assessment was measured as future preference of follow-up. Overall satisfaction, expectations, and comparison with previous abortion experiences were compared between study groups. Results: 731 women were randomized to the clinic follow-up group (n = 353) or home-assessment group (n = 378). 623 (85%) women were successfully followed up, of those 597 (96%) were satisfied and 592 (95%) found the abortion better or as expected, with no difference between study groups. The majority, 355 (57%) women, preferred home-assessment in the event of a future abortion. Significantly more women, 284 (82%), in the home-assessment group preferred home-assessment in the future, as compared with 188 (70%) of women in the clinic follow-up group, who preferred clinic follow-up in the future (p < 0.001). Conclusion: Home-assessment is highly acceptable among women in low-resource, and rural, settings. The choice to follow-up an early medical abortion according to women's preference should be offered to foster women's reproductive autonomy.

Designing single event upset mitigation techniques for large SRAM-Based FPGA components

This thesis presents the study and development of fault-tolerant techniques for programmable architectures, the well-known Field Programmable Gate Arrays (FPGAs), customizable by SRAM. FPGAs are becoming more valuable for space applications because of the high density, high performance, reduced development cost and re-programmability. In particular, SRAM-based FPGAs are very valuable for remote missions because of the possibility of being reprogrammed by the user as many times as necessary in a very short period. SRAM-based FPGA and micro-controllers represent a wide range of components in space applications, and as a result will be the focus of this work, more specifically the Virtex® family from Xilinx and the architecture of the 8051 micro-controller from Intel. The Triple Modular Redundancy (TMR) with voters is a common high-level technique to protect ASICs against single event upset (SEU) and it can also be applied to FPGAs. The TMR technique was first tested in the Virtex® FPGA architecture by using a small design based on counters. Faults were injected in all sensitive parts of the FPGA and a detailed analysis of the effect of a fault in a TMR design synthesized in the Virtex® platform was performed. Results from fault injection and from a radiation ground test facility showed the efficiency of the TMR for the related case study circuit. Although TMR has showed a high reliability, this technique presents some limitations, such as area overhead, three times more input and output pins and, consequently, a significant increase in power dissipation. Aiming to reduce TMR costs and improve reliability, an innovative high-level technique for designing fault-tolerant systems in SRAM-based FPGAs was developed, without modification in the FPGA architecture. This technique combines time and hardware redundancy to reduce overhead and to ensure reliability. It is based on duplication with comparison and concurrent error detection. The new technique proposed in this work was specifically developed for FPGAs to cope with transient faults in the user combinational and sequential logic, while also reducing pin count, area and power dissipation. The methodology was validated by fault injection experiments in an emulation board. The thesis presents comparison results in fault coverage, area and performance between the discussed techniques.

A Tree Tools informática e o processo de implantação da mudança administrativa de formação do tipo de capital e suas conseqüências nas áreas motivacionais e de satisfação

A organização do trabalho constitui-se a partir da caracterização de sua estrutura e dos respectivos impactos do desempenho de papéis profissionais. O relacionamento interpessoal no ambiente de trabalho reflete o grau de participação e colaboração dos indivíduos. Os indivíduos diferem uns dos outros pelas suas atitudes em relação a um trabalho "estimulante" ou não. O valor prático do estudo, busca analisar o grau de satisfação I insatisfação dos indivíduos em relação a si próprios e em relação a empresa. Também foi feito um estudo das abordagens motivacionais e suas ligações com os indivíduos acima citados. A maior parte dos autores que contribuíram ao desenvolvimento dos temas considerados neste estudo parecem ter querido conciliar dois imperativos: aumentar a rendimento dos trabalhadores e elevar o seu nível de satisfação no trabalho (este segundo imperativo foi reformulado recentemente em termos de melhora da qualidade de vida no trabalho). Ainda no corpo do trabalho foram apresentados resultados da pesquisa realizada e discutidas algumas das abordagens motivacionais, com a finalidade de fundamentar teoricamente a questão principal que é a forma de administração da empresa o que se trata de satisfação I motivação na empresa TREE TOOLS, escolhida como agente deste estudo de caso.

Supply chain turbulence: the impact of a mid-range event in multi-tier, multi-dimension supply chains

Nota: A autora agradece à Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP) pela concessão de bolsa de estudos para o desenvolvimento deste projeto de pesquisa.

An analysis of the perceived service quality of hospitality industry in Rio de Janeiro through the SERVQUAL model: a multiple case study

Brazil is under political and financial crises where the end seems far away. Because of that, researchers argue that the hotel rooms offered by Rio de Janeiro, built to host the Olympic Games 2016, will be difficult to occupy after the event. It is then necessary for the hotels to understand how guests perceive the service quality in order to adapt to this new era. If guests’ perceptions meet or exceed their expectations, they will be satisfied and will probably return. Thus based on the SERVQUAL approach, this paper aims to study the impact of the service dimensions on the guests’ overall satisfaction at hotels of Rio de Janeiro. Two hotels were considered representative of the city in terms of service quality and customers’ profile. Interviews to the hotel managers were performed, and questionnaires to the guests were administered. Among the five SERVQUAL dimensions – Reliability, Tangibles, Responsiveness, Assurance, and Empathy – the Empathy dimension appears to be the only one that affects the guests’ overall satisfaction. The study could also identify that gender, country of residence, home country and family income have an impact on guests’ satisfaction. This study has no intention of generalization, but rather of refining the theory about services and the SERVQUAL model.

Xylella fastidiosa: An in vivo system to study possible survival strategies within citrus xylem vessels based on global gene expression analysis

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Vegetative propagation of bauhinia x blakeana, an ornamental sterile tree

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Genetic characterization of fig tree mutants with molecular markers

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Soil-liming effects on the development and nutritional status of the carambola tree and its fruit-yielding capacity

Soil acidity is one of the most important factors limiting agricultural production in the tropics. For this reason, the objective of this research work was to evaluate the effects of soil liming on the performance of carambola (Averrhoa carambola) trees. The experiment took place at the Citrus Experimental Station in Bebedouro, state of São Paulo, Brazil. The soil was a Typic Haplustox (V = 26% at the 0- to 20-cm layer) between August 1999 and July 2003. The following doses of limestone were employed: 0, 1.85, 3.71, 5.56, and 7.41 t ha(-1). During 40 months after the experiment was set up, soil chemical attributes were periodically examined. For a period of 2 years, the trees had their leaves analyzed for micro-and macronutrients; their trunk diameter, height, and crown volume measured; and the production of fruits determined. Liming improved in evaluated chemical attributes of the soil: pH, calcium (Ca), magnesium (Mg), BS, V, and hydrogen and aluminium (H + At) from the upper 60 cm of soil when the samples were taken from both the line and between the lines of plants. In the leaves, the levels of Ca and Mg also increased. The highest fruit yields were observed when soil base saturations reached 45% on the lines and 50% between the lines, as well as when foliar levels of 8.0 g of Ca and 4.7 a of Mg per kilogram of leaves were attained.

RAPD analysis of genetic variability in a multiprovenance base population of Eucalyptus grandis hill ex maiden

Este estudo visou avaliar a variabilidade e distância genética dentro de uma população-base de melhoramento genético de Eucalyptus grandis. A avaliação da variabilidade genética tem como objetivos principais analisar a base genética da população-base e montar um banco de dados marcadores moleculares da população em análise. Essa população é formada por 327 indivíduos, principalmente das procedências de Coff's Harbour, Atherton e Rio Claro. Devido à heterozigosidade natural dessa população, ela pode ser dividida em diversas subpopulações, de acordo com a latitude e longitude de origem; e dentro de subpopulações, em função do grau de melhoramento genético já realizado do material analisado no Brasil. Isso permitiu avaliar quanto da variabilidade detectada dentro da população-base foi devido a esses fatores: procedência e grau de melhoramento. A aplicação da técnica RAPD permitiu avaliar 70 locos polimórficos, que foram analisados utilizando-se o coeficiente de Jaccard, o que resultou em matrizes de similaridade genética entre os indivíduos. Os dados de similaridade genética posteriormente foram submetidos à análise estatística. Osdados indicaram que a população-base apresenta ampla base genética, com média de similaridade genética de 0,328. O subgrupo denominado Região 3, composto por material selvagem da macrorregião de Atherton, juntamente com material de APS da macrorregião de Coff's Harbour, foi um dos que mais contribuíram para a ampla base genética da população-base. Foi possível detectar diferença estatística entre as populações selvagens das procedências de Atherton e Coff's Harbour, assim como entre essas procedências e a de Rio Claro.

Evaluation of thermal behavior of latex membranes from genetically improved rubber tree (Hevea brasiliensis)

Thermal stability, thermal decomposition process, residual mass, temperature of glass transition (T-g) and temperature dependence of storage modulus (E'), were determined for latex membranes prepared from six clones of Hevea brasiliensis: IAC 331, IAC 332, IAC 333 and IAC 334 grown at experimental plantations of Instituto Agronomico de Campinas (IAC) in Votuporanga, São Paulo State, Brazil. Latex membranes from GT1 and RRIM 600 Asian matrix clones were used as references. The thermal behavior of latex membranes from genetically improved rubber trees was characterized using thermogravimetry/derivative thermogravimetry (TG/DTG), differential scanning calorimetry (DSC) and dynamic mechanical analysis (DMA). The thermal behavior of latex from clones studied in the present work showed similar features of the clones previously reported (IAC 40, IAC 300, IAC 301, IAC 328, IAC 329 and IAC 330), with mass loss in four consecutive steps, except IAC 333, which showed an additional mass loss step. (c) 2006 Elsevier B.V. All rights reserved.

Thermal analysis as a screening technique for the characterization of babassu flour and its solid fractions after acid and enzymatic hydrolysis

The babassu (Orbignya phalerata) is a native tree found in northern Brazil. Extracts of the babassu coconut have been widely used in industry. Babassu flour has about 60% starch, thus, besides nourishment it can be used as an alternative biofuel source. However, the properties of this starch lack of study and understanding. The main purpose of this study was to investigate the thermal behavior of raw babassu flour and its solid hydrolyzed fraction. The analyses were carried out using SHIMADZU DSC and TG thermic analyzers. The results demonstrated a reduction in thermal stability of the solid hydrolyzed fraction compared to raw matter. The kinetic parameters were investigated using non-isothermal methods and the parameters obtained for its decomposition process were an E(a) of 166.86 kJ mol(-1) and a frequency factor (beta) of 6.283 x 1014 min(-1); this was determined to be a first order reaction (n = 1). (C) 2011 Elsevier B.V. All rights reserved.

Thermal analysis characterization of PAAm-co-MC hydrogels

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)