Amostragem de poluentes particulados emitidos pela queima de biomassa em correntes confinadas

It is clear today the ever-accelerating search for new fuels that will eventually replace those that will survive in our society, which are fossil fuels. For this reason, a fuel used since the dawn of humanity and much studied since then, considered the generator of clean, renewable energy, can earn more and more space in the power generation sector, which is biomass. We performed two experiments with two different types of biomass, one from the Amazon rainforest and other pine and eucalyptus as waste from the sawmill UNESP Itapeva. In the first experiment, conducted at the Laboratory of Combustion and Propulsion INPE Cachoeira Paulista were conducted three tests in a chimney with a fan creating forced ventilation, where the biomass was burned and deposited on a support beneath the hood. In the second experiment was conducted to analyze the emission of particulate matter using biomass (waste) from the sawmill on the campus of UNESP experimental Itapeva the burning of it in a burner for heating water for a wood oven. In these experiments we used a particle called DATARAM4 sampler that is capable of sampling both outdoors and inside of pipelines, which is the focus of this work. With this equipment it was possible to measure the concentration of particulate matter in all the firings as above, and compare them to levels acceptable in the current law, always trying to analyze the so-called fine particles, which are those with diameters less than 2.5 μm. Using data obtained from the equipment was also possible to evaluate the diametral distribution of particulate matter in question, and verify which phases of the flares in the concentration and the diameters of the particles are the most critical. In this work we concluded that in all firings conducted concentrations of particulate matter were higher than that allowed by the law, and the diameters were found that are more harmful to human health

Estrutura populacional de Oeceoclades maculata Lindl. (Orchidaceae), em um mosaico vegetacional (FEENA) da Floresta Estadual Edmundo Navarro de Andrade, Rio Claro, São Paulo

O objetivo do presente estudo foi avaliar a estrutura de população de O. maculata, através de sua distribuição espacial e estrutura de habitat, comparando características físicas e biológicas em diferentes fisionomias de Pinus spp. e Eucalyptus spp.. Foram montadas 86 parcelas de 5m por 10m, distribuídas uniformemente entre 4 áreas pré-estabelecidas de fisionomias distintas. Os indivíduos levantados foram separados em duas classes etárias, jovens e adultos, e contabilizou-se a taxa de predação, número de pseudobulbos e número de folhas. Os parâmetros ambientais avaliados foram cobertura herbácea, densidade de dossel, luminosidade e umidade de serrapilheira. A espécie apresentou densidades bastante elevadas nas áreas de plantios de eucalipto (1224 e 1733 indivíduos por hectare) e baixas nos plantios de pinus (88 e 26 individuos por hectare) o que levou as análises a se concentrarem nas fisionomias compostas por eucaliptos. O padrão de distribuição da espécie foi o agregado em todos os ambientes. Indivíduos adultos apresentaram significativamente um número médio de pseudobulbos maior que indivíduos jovens (Mann-Whitney; U = 24248.500; p<0,001), porém a diferença no número de folhas não foi significativa. A taxa de predação foliar em O. maculata entre as áreas de eucaliptos apresentou variação significativa. A variação do total de folhas predadas foi confirmada pelo teste Qui-quadrado de Pearson (X²=115.487; gl=1; p<0.001). A comparação de médias, com base no teste de Kruskal-Wallis, para cobertura de dossel (H(3,N=102)=28,534 p<0,001) e cobertura herbácea H(3,N=94)=28,246, p<0,001, mostrou taxas menores nas áreas de eucalipto. A umidade da serrapilheira foi menor (36,5%) nos locais onde a espécie apresentou agrupamentos, quando comparada aos locais de ausência (47,5%). Oeceoclades maculata Lindl. possui grande capacidade para colonizar ambientes... (Resumo completo, clicar acesso eletrônico abaixo)

Otimização da extração alcalina com peróxido de hidrogênio em seqüência de branqueamento com aplicação de baixo fator kappa

The new market, focused on sustainability and other environmental concerns, refers to innovations that seek alternative forms of production. In pulp and paper bleaching alternative reagents are studied, for example, hydrogen peroxide, in partial substitution of chlorine dioxide in order to reduce the formation of organochlorines. In this context, this study examined the burden of hydrogen peroxide (H2O2) on alkaline extraction stage (stage Ep) required for the bleaching of pulp with eucalyptus kraft pulp, pre-oxygen delignified to obtain equivalent brightness at 90 ± 0.5% ISO, as well as its effect on quality of pulp produced. The pulp was bleached by the sequence D(Ep)DP, with the application of factor kappa of 0.14 and varying the concentration of hydrogen peroxide in Ep stage three, five, seven and nine kilograms of reagent per ton of pulp absolutely drought. The final P stage was optimized with the use of six, nine and twelve pounds of hydrogen peroxide per ton of absolutely dry pulp to achieve the required brightness. The quality of the pulp produced was analyzed based on the kappa number, the brightness and the viscosity. The methods were performed according to standards set by the standard TAPPI (Technical Association of the Pulp and Paper Industry). The best result was obtained using the following D0Ep(7)D1P(6), which showed a viscosity of 19.9 cP, 89.6% ISO brightness, consumption of 94.9 kg / t of reagents and reagent costs of US$ 28.15, because it showed better pulp quality for a lower cost compared to the others. It was found that the greater the amount of hydrogen peroxide in alkaline extraction, the lower the kappa number and increased the amount of residual hydrogen peroxide. The higher the charge of hydrogen peroxide in Ep stage, the lower the need for hydrogen peroxide in the final P stage, reducing the cost of bleaching

Frugivoria e dispersão de sementes por anta (Tapirus terrestris) em uma área de plantio florestal no cerrado, MS

A anta brasileira Tapirus terrestris é o maior mamífero terrestre neotropical, sendo encontrada em todos os biomas brasileiros, com exceção da Caatinga, onde foi extinta. É capaz de carregar sementes de tamanhos variados por longas distâncias e em grandes quantidades, e depositá-las em locais distantes da plantamãe. Porém, seu potencial como dispersora é questionado, uma vez que o transporte para latrinas pode dificultar o estabelecimento pela grande quantidade de sementes. Os objetivos desse projeto foram (1) investigar a dieta da anta em um ambiente de Cerrado e (2) verificar, através de testes de germinação, se a passagem pelo seu trato digestivo modifica a taxa de germinação de araçá-docampo (Psidium guineense) e mutambo (Guazuma ulmifolia). O estudo foi realizado na fazenda Barra do Moeda, Três Lagoas/MS, onde a matriz é composta por talhões de eucalipto e cerrado em diversos estágios sucessionais. Os bolos fecais foram coletados em viagens trimestrais e, na triagem, tiveram as sementes separadas e contabilizadas. Foram utilizados os testes qui-quadrado e o de Mann-Whitney para as análises estatísticas. A triagem dos bolos fecais registrou 53 espécies vegetais, sendo 31 identificadas. As famílias com maior proporção foram Myrtaceae, Poaceae, Malvaceae e Rubiaceae, sendo verificada diferença significativa na dieta entre as duas estações. O fruto de Araçá-do-Campo (Psidium guineense) foi o mais consumido nos dois períodos, o que indica a importância desse item alimentar para a anta. Além disso, foi verificada uma redução significativa no sucesso germinativo do araçá-do-campo após a passagem pelo trato digestivo desse mamífero, sugerindo que apesar da grande quantidade de sementes, parte é inviabilizada. Foram também registradas sete espécies e dois gêneros novos, o que indica a importância da realização de novas pesquisas, com o intuito... (Resumo completo, clicar acesso eletrônico abaixo)

Caracterização morfológica e fenotípica de leveduras do gênero Cryptococcus com ênfase na pesquisa de Cryptococcus neoormans isoladas de amostras de água de mar e areia de três ambientes costeiros do estado de São Paulo: Canal de São Sebastião, Baixada Santista e Ubatuba

The yeast Cryptococcus neoformans is the etiologic agent of cryptococcosis, an infectious cosmopolitan disease that affects humans. Although rare, this disease is potentially fatal, especially for immunocompromised hosts. This pathogen is frequently isolated from excrements of pigeons and parrots, with many environmental sources such as birds, pigeon droppings, eucalyptus leaves, decaying trees, towers, churches and places of storage of grain (the port area). The isolation of this microorganism has been obtained also from the aquatic environment. The identification of environmental sources is needed to protect human health, especially susceptible populations such as immunocompromised. Therefore, this study investigated the presence of Cryptococcus neoformans in yeast isolates obtained from samples of sea water and sand from three regions of São Paulo: São Sebastião Channel, Santos and Ubatuba. Isolates were analyzed according to micro-and macroscopic characteristics and biochemical tests: microculture, urease, ink nankin, auxanograma, zymogram and phenol. We analyzed 199 isolates, 175 of which had features suggestive for Cryptococcus spp. in microculture. All these 175 isolates were sown in the Christensen urea middle to verify the production of urease and submitted to the technique nankin ink to visualize the capsule. Of these, only 24 were selected for the next test that was the auxanograma (assimilation of carbohydrate and nitrogen). Of the 24, 10 were tested in zymograms (fermented sugar), from which 5 were selected for the phenoloxidase test in medium containing dopamine. None of the 5 isolates tested had black or brown color characteristic of Cryptococcus neoformans. According to these tests, we arrived at 5 isolates identified to the genus Cryptococcus, but not the neoformans specie

Produção e caracterização físico-mecânica do compósito cimento-madeira com variação granulométrica dos resíduos lignocelulósicos

The need to reduce environmental damage and add value to waste causes more and more new alternatives appear to unite these two points. One of the main ways to achieve this in timber industries and the use of waste for making panels. This work was aimed at studying the influence of particle size and density in Eucalyptus mechanical compressive strength of cement composite wood. For this study was performed production and physico-mechanical characterization of specimens, using portland cement, water and waste eucalyptus. The methodology consists of a statistical study of the results obtained by calculating the density and axial compression tests and a subsequent comparison of these results with other studies. The results showed that there are significant differences in density and compressive strength when using different particle sizes the particles of eucalyptus. In general, the smaller the particle size, the lower the compression strength and the greater the density when the samples are produced with the same trait

Caracterização físico-mecânica de elementos estruturais roliços perfilados de Amaru

The study of physical and mechanical properties of wood is essential for its structural use and it is of great importance to the construction industry. Thus, this study aimed to determine the physical and mechanical properties of the wood Amaru - a hybrid of Eucalyptus, developed by Plantar Projects and Forest Products Ltda. In order to determine the properties of Amaru, round samples were used, which were provided to the Laboratory of Wood and Wooden Structures of the School of Engineering of São Carlos, University of São Paulo - LaMEM / EESC / USP. For the characterization of the physical properties, the apparent specific gravity and moisture content of the samples were determined. To the mechanical characterization, the following properties were evaluated: strength and stiffness in compression, strength and stiffness in bending, shear and tension. The procedures of the tests performed in this study were done according to the recommendations of the Brazilian Wood Standard ABNT NBR 7190:1997. The specimen used were confectioned in actual dimensions, according to as those used in the construction system proposed by Plantar. The results obtained from the tests performed showed that the mechanical properties approached the values proposed by the Wood Standard NBR 7190. The visual grading was important to provide a primary idea about the failure modes to be obtained from the tests performed. The bending test showed the modulus of elasticity (MOE) and Modulus of Rupture (MOR), which resulted in 15822 MPa and 101,7 MPa, respectively. The compression test resulted in values Ec0,m and fc0, 15698 MPa and 50,7 MPa. The tensile strength (ft0) of this hybrid was calculated and its value obtained was 60,8 MPa. The shear strength (fv0) was 8,2 MPa. The results obtained from the tests are the basis for engineers and architects to design structures using wood species Amaru

Produção de polpa solúvel a partir de Eucalyptus urograndis

The wood of the gender Eucalyptus occupies a prominence place in relation to other cellulose sources, due to its chemical composition, its low cost, abundance and availability. The dissolving pulp obtaining occurs basically starting from three stages: prehydrolysis of the wood following by cooking and finally by the bleaching process. In the dissolving pulp production is necessary a pretreatment stage for the hemicelluloses removal. Among the chemical cooking processes, the Kraft process is the most used for cellulosic pulps production starting from eucalyptus, in the additive presence or not. The anthraquinone uses in the pulping process has as main purposes increasing the delignification rate as well as protecting the pulp regarding the degradation of the polysaccharide chains. The ECF bleaching process consists of the purification of the pulp through bleaching agents, being excepted the elementary chlorine. The dissolving pulp is a pulp of high a-cellulose content and purity destined to the cellulose derivatives production as carboxymethyl cellulose, nitrocellulose and microcrystalline cellulose. The production of a certain product, as well as its final application, is determined by the chemical properties of the pulp. The present work had as purpose producing cellulosic pulp with kappa number around 9 destined to the production of dissolving pulp in way to evaluate the use of the anthraquinone (AQ) in the Kraft process according to the chemical properties of the obtained pulps. It has been still intended developing an effective technology of bleaching for the high purity and quality dissolving pulp production. The prehydrolysis was accomplished in laboratory rotational autoclave for 30 minutes at 170ºC in the water:wood rate 3,5:1 (L:kg). The Kraft/AQ pulping were accomplished in laboratory rotational autoclave being initially modified the active alkali load (10, 13, 16 and 19%) at sulfidity of 25% ...

Resposta da comunidade de formigas ao efeito de borda em paisagens de Cerrado

Uma das principais alterações ambientais decorrentes da ação antrópica é o efeito de borda, consequência direta da fragmentação, que altera condições microclimáticas nas bordas dos fragmentos. Este processo afeta a biodiversidade, interferindo na dinâmica das comunidades, tanto vegetais, quanto animais, alterando a composição e a estrutura das comunidades. Através da utilização de bioindicadores é possível compreender como alterações nos hábitats interferem nas comunidades locais, ou em processos ecológicos essenciais para a manutenção do ecossistema e da biodiversidade local ou regional. Devido à grande riqueza, abundância e importância em diversos processos ecológicos, como por exemplo, dispersão de sementes e ciclagem de nutrientes, as formigas têm sido utilizadas como indicadores ambientais. Os objetivos deste trabalho foram avaliar como as comunidades de formigas de fragmentos de cerrado respondem ao efeito de borda, especificamente se essa resposta ocorre de forma gradiente ou hábitat-matriz (formigas não estão presentes na borda). Também foi analisado se o tipo de matriz adjacente influencia nessas respostas observadas em 15 paisagens de cerrado circundadas por matrizes de pasto, cana-de-açúcar e eucalipto onde se utilizou armadilhas de queda ao longo de transectos posicionados tanto dentro como fora dos fragmentos. Para a riqueza total de formigas o modelo hábitat-matriz com interferência da matriz foi o que melhor explicou a distribuição. Os modelos que melhor explicaram a riqueza e abundância dos grupos funcionais variaram consideravelmente, o que evidencia a importância de buscar modelos mais complexos (modelo gradiente) que expliquem tanto as respostas mais simples (hábitat-matriz)como as mais multíplices. As comunidades analisadas apresentam diferentes funções dentro do hábitat e das matrizes, dessa forma participam de vários processos ecológicos sendo assim bons indicadores...

Estudo de caso do conforto térmico de dois modelos construtivos em madeira: wood frame e log home

O presente trabalho consiste em demonstrar valores referentes ao conforto ambiental de dois modelos construtivos, sendo o primeiro um edifício já executado e o outro em fase de implantação, ambos no Campus Experimental de Itapeva, aplicando alguns conceitos em habitação mais sustentáveis de madeira na região de Itapeva, estado de São Paulo, Brasil. A edificação construída sedia duas salas de aula a partir da tipologia construtiva wood frame, constituída basicamente de paredes autoportantes compostas de ossatura de madeira tratada de pinus.sp, chapas estruturais em OSB, manta de isolamento térmico/acústico e fechamento interno e externo, respectivamente em gesso e sidding (lambris de madeira). A habitação em fase de início de implantação foi idealizada a partir da tipologia construtiva log-home, e atenderá a necessidade de espaço físico para abrigar o Centro Acadêmico e a empresa-júnior “PROMAD”, ambos do curso de Engenharia Industrial Madeireira do Campus Experimental da UNESP/Itapeva. Esta construção foi elaborada a partir de técnicas de baixo impacto ambiental, levando em consideração os resultados de análise térmica obtidos na edificação anterior. Em ambos modelos construtivos foram empregados recursos renováveis abundantes na região, como a madeira de reflorestamento de Pinus e de Eucalipto. Foi acrescentado ainda ao segundo modelo a utilização de resíduos industriais lignocelulósicos, como rolete de laminação e outros materiais locais disponíveis. A metodologia básica empregada para a obtenção de dados sobre o conforto térmico em relação as edificações foi, para o primeiro caso, a coleta de dados de temperatura e umidade utilizando um termo-higrômetro, a sistematização e análise de dados reais obtidos no interior da edificação. No segundo caso, o dimensionamento do conforto térmico... (Resumo completo, clicar acesso eletrônico abaixo)

Aplicação do ciclo rankine orgânico alimentado termicamente pela queima da casca do arroz e resíduos de madeira

With the growing world energy demand mainly from developing countries like Brazil, Russia, India and China, the search for efficient sources of energy becomes a challenge for the coming years. Among the most widely used alternative sources, biomass is the one that grows in a more pronounced way. This study will assess the real possibility of having it as a heat source in an Organic Rankine Cycle, which employ heat transfer fluids as working fluids instead of water. From a regional data collection in agricultural production and their potential rice production and the resulting husk was defined as more appropriate. The availability of husks together with an amount of eucalyptus wood, provided by a company in the region on a monthly basis, were analyzed, and the low participation of the wood was discarded by the thermal contribution of little significance. Based on this, it was established the calorific value of fuel for thermodynamic calculations and the cycle to be used. It was then carried out the choice of working fluid from the literature and their availability in the library of software used for the simulations, the Engineering Equation Solver - ESS. The fluid most appropriate for the burning of biomass, Octamethyltrisiloxane (OMTS), was not included in the software and so the R227ea and R134a were selected. After the initial parameters modeling definition, as condensing temperature, efficiency and live steam conditions, the simulations were performed, and only the R227ea remained within the feasible thermodynamic and technological ranges. With this fluid the turbine power output was 265.7 [kW] for a scenario of 24 hours/day burning, 800.3 [kW] to biomass burning for 8 hours/day and 2134 [kW] for burning only 3 hours/day. The thermal efficiency of the cycle remained in the range of 6%, and for plants operating with the most... (Complete Abstract click eletronic access below)

Reforma Agrária em questão: a propriedade privada como fator de desterritorialização camponesa no Assentamento Fazenda Primavera (Andradina-SP)

Pós-graduação em Geografia - FCT

Análise comparativa de técnicas de recuperação ambiental em áreas degradadas no município de Bofete/SP

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Utilização do cavaco de madeira como combustível alternativo para a produção de vapor de água em uma caldeira aquatubular com grelha fixa do tipo PIN HOLE

The steady increase in the price of oil and its derivatives, carbon credits, the concern with the environment combined with the precipitation of rain water and lack of water resources that Brazil has suffered in 2014 caused a migration of participation sources of energy in the Brazilian energy matrix. The hydropower sector suffered big drop at 2013 and is suffering so far, contributing thus to the generation and cogeneration of thermal energy using renewable energy sources such as: sugarcane bagasse, wood chips, rice husks, among others. The selling price of the electricity market reached the level of R$ 807, 00 MWh in January 2014 (Source: ANEEL), heating the Brazilian thermoelectric sector. Although thermoelectric use in bulk water as vaporizing fluid to produce electricity and use in various processes, water reuse plans have become an important factor in these industries. The increased use of biomass has been the bagasse which is allied to the sugarcane sector, strong market in Brazil, and consists basically use the rest of sugar cane, sugarcane industries that would play out. The sugar and ethanol industry is very unstable and only lasts for 6-8 months a year, and the remaining time in the period known as between crop that corresponds to the planting and harvesting of sugarcane and then enter the period of vintage which is the constant cane harvesting and crushing it. This instability of the market and the thermoelectric idle period leads the thermoelectric industries to seek other sources of renewable energy, such as wood chips (pine, Eucalyptus, Orange), rice husk, sorghum among others, to not be dependent on alcohol sector. The present work aims to study the use of wood chips as an alternative biomass for burning a fuel that essentially uses bagasse, the thermoelectric in question consists of two boilers that produce together 350 t / h ... (Complete Abstract click electronic access below)

Identificação, caracterização e avaliação da patogenicidade de diferentes isolados de fusarium spp. para o controle de thaumastocoris peregrinus (hemiptera: thaumastocoridae)

Pós-graduação em Agronomia (Proteção de Plantas) - FCA