Pirólise termoquímica de pós da fibra de coco seco em um reator de cilindro rotativo para produção de bio-óleo

This master thesis aims at developing a new methodology for thermochemical degradation of dry coconut fiber (dp = 0.25mm) using laboratory rotating cylinder reactor with the goal of producing bio-oil. The biomass was characterized by infrared spectroscopy with Fourier transform FTIR, thermogravimetric analysis TG, with evaluation of activation energy the in non-isothermal regime with heating rates of 5 and 10 °C/min, differential themogravimetric analysis DTG, sweeping electron microscopy SEM, higher heating value - HHV, immediate analysis such as evaluated all the amounts of its main constituents, i.e., lignin, cellulose and hemicelluloses. In the process, it was evaluated: reaction temperature (450, 500 and 550oC), carrier gas flow rate (50 and 100 cm³/min) and spin speed (20 and 25 Hz) to condensate the bio-oil. The feed rate of biomass (540 g/h), the rotation of the rotating cylinder (33.7 rpm) and reaction time (30 33 min) were constant. The phases obtained from the process of pyrolysis of dry coconut fiber were bio-oil, char and the gas phase non-condensed. A macroscopic mass balance was applied based on the weight of each phase to evaluate their yield. The highest yield of 20% was obtained from the following conditions: temperature of 500oC, inert gas flow of 100 cm³/min and spin speed of 20 Hz. In that condition, the yield in char was 24.3%, non-condensable gas phase was 37.6% and losses of approximately 22.6%. The following physicochemical properties: density, viscosity, pH, higher heating value, char content, FTIR and CHN analysis were evaluated. The sample obtained in the best operational condition was subjected to a qualitative chromatographic analysis aiming to know the constituents of the produced bio-oil, which were: phenol followed by sirigol, acetovanilona and vinyl guaiacol. The solid phase (char) was characterized through an immediate analysis (evaluation of moisture, volatiles, ashes and fixed carbon), higher heating value and FTIR. The non-condensing gas phase presented as main constituents CO2, CO and H2. The results were compared to the ones mentioned by the literature.

Avaliação da biodessulfurização de 4-metildibenzotiofeno por Rhodococus rhodochrous (NRRL B-2149)

Crude oil has between 0.04 up to 5% of sulphur, the higher the oil the higher the sulphur levels. Sulphur usually gives problems such as corrosion in refinery, and once burnt produces SO2 that goes to atmosphere. This work aim to investigate the capacity of Rhodococcus rhodochrous (NRRL B-2149) to metabolize the model compound 4-methyldibenzotiophene (4-MDBT), to remove the sulphur and transform it in 2-hydroxybiphenyl (2-HBF) and sulphite using the 4S pathway. Kynetic runs were carried out in shaker at 120 rpm and 32°C. Samples were taken every 12h to assay substrate consume as well as cells production using HPLC. Results showed that R. rhodochrous NRRL B-2149 can use the 4S pathway in order to remove sulphur without change the carbon chain of the molecule as well as that cells and 4-MDBT affects the product formation. The production of 2-hydroxybiphenyl has interest for industry once it is a potent biocide. However, evaluation is necessary in order to obtain better results compatible with industry needs

Pirólise térmica e catalítica de resíduos de vácuo gerados no refino de petróleo

In this study, was used a very promising technique called of pyrolysis, which can be used for obtaining products with higher added value. From oils and residues, since the contribution of heavier oils and residues has intensified to the world refining industry, due to the growing demand for fuel, for example, liquid hydrocarbons in the range of gasoline and diesel. The catalytic pyrolysis of vacuum residues was performed with the use of a mesoporous material belonging the M41S family, which was discovered in the early 90s by researchers Mobil Oil Corporation, allowing new perspectives in the field of catalysis. One of the most important members of this family is the MCM-41, which has a hexagonal arrangement of mesopores with pore diameters between 2 and 10 nm and a high specific surface area, making it very promising for use as a catalyst in petroleum refining for catalytic cracking, and their mesopores facilitate the access of large hydrocarbon molecules. The addition of aluminum in the structure of MCM-41 increases the acidity of the material, making it more positive for application in the petrochemical industry. The mesoporous material of the type Al-MCM41 (ratio Si / Al = 50) was synthesized by hydrothermal method starting from the silica gel, NaOH and distilled water added to the gel pseudobohemita synthesis. Driver was used as structural CTMABr. Removal of organic driver (CTMABr) was observed by TG / DTG and FTIR, but this material was characterized by XRD, which was observed the formation of the main peaks characteristic of mesoporous materials. The analysis of adsorption / desorption of nitrogen this material textural parameters were determined. The vacuum residues (VR's) that are products of the bottom of the vacuum distillation tower used in this study are different from oil fields (regions of Ceará and Rio de Janeiro). Previously characterized by various techniques such as FTIR, viscosity, density, SARA, elemental analysis and thermogravimetry, which was performed by thermal and catalytic degradation of vacuum residues. The effect of AlMCM-41 was satisfactory, since promoted a decrease in certain ranges of temperature required in the process of conversion of hydrocarbons, but also promoted a decrease in energy required in the process. Thus enabling lower costs related to energy expenditure from degradation during processing of the waste

Estudo de modelos composicionais de óleo na injeção contínua de vapor

The objective of the thermal recovery is to heat the resevoir and the oil in it to increase its recovery. In the Potiguar river basin there are located several heavy oil reservoirs whose primary recovery energy provides us with a little oil flow, which makes these reservoirs great candidates for application of a method of recovery advanced of the oil, especially the thermal. The steam injection can occur on a cyclical or continuous manner. The continuous steam injection occurs through injection wells, which in its vicinity form a zone of steam that expands itself, having as a consequence the displace of the oil with viscosity and mobility improved towards the producing wells. Another possible mechanism of displacement of oil in reservoirs subjected to continuous injection of steam is the distillation of oil by steam, which at high temperatures; their lighter fractions can be vaporized by changing the composition of the oil produced, of the oil residual or to shatter in the amount of oil produced. In this context, this paper aims to study the influence of compositional models in the continuous injection of steam through in the analysis of some parameters such as flow injection steam and temperature of injection. Were made various leading comparative analysis taking the various models of fluid, varying from a good elementary, with 03 pseudocomponents to a modeling of fluids with increasing numbers of pseudocomponents. A commercial numerical simulator was used for the study from a homogeneous reservoir model with similar features to those found in northeastern Brazil. Some conclusions as the increasing of the simulation time with increasing number of pseudocomponents, the significant influence of flow injection on cumulative production of oil and little influence of the number of pseudocomponents in the flows and cumulative production of oil were found

Análise paramétrica do método de injeção alternada de água e CO2(WAG) em reservatórios de petróleo

After the decline of production from natural energy of the reservoir, the methods of enhanced oil recovery, which methods result from the application of special processes such as chemical injection, miscible gases, thermal and others can be applied. The advanced recovery method with alternating - CO2 injection WAG uses the injection of water and gas, normally miscible that will come in contact with the stock oil. In Brazil with the discovery of pre-salt layer that gas gained prominence. The amount of CO2 present in the oil produced in the pre-salt layer, as well as some reservoirs is one of the challenges to be overcome in relation to sustainable production once this gas needs to be processed in some way. Many targets for CO2 are proposed by researchers to describe some alternatives to the use of CO2 gas produced such as enhanced recovery, storage depleted fields, salt caverns storage and marketing of CO2 even in plants. The largest oil discoveries in Brazil have recently been made by Petrobras in the pre -salt layer located between the states of Santa Catarina and Espírito Santo, where he met large volumes of light oil with a density of approximately 28 ° API, low acidity and low sulfur content. This oil that has a large amount of dissolved CO2 and thus a pioneering solution for the fate of this gas comes with an advanced recovery. The objective of this research is to analyze which parameters had the greatest influence on the enhanced recovery process. The simulations were performed using the "GEM" module of the Computer Modelling Group, with the aim of studying the advanced recovery method in question. For this work, semi - synthetic models were used with reservoir and fluid data that can be extrapolated to practical situations in the Brazilian Northeast. The results showed the influence of the alternating injection of water and gas on the recovery factor and flow rate of oil production process, when compared to primary recovery and continuous water injection or continuous gas injection

Desenvolvimento de uma unidade pirolítica com reator de cilindro rotativo: obtenção de bio-óleo

The demand for alternative sources of energy drives the technological development so that many fuels and energy conversion processes before judged as inadequate or even non-viable, are now competing fuels and so-called traditional processes. Thus, biomass plays an important role and is considered one of the sources of renewable energy most important of our planet. Biomass accounts for 29.2% of all renewable energy sources. The share of biomass energy from Brazil in the OIE is 13.6%, well above the world average of participation. Various types of pyrolysis processes have been studied in recent years, highlighting the process of fast pyrolysis of biomass to obtain bio-oil. The continuous fast pyrolysis, the most investigated and improved are the fluidized bed and ablative, but is being studied and developed other types in order to obtain Bio-oil a better quality, higher productivity, lower energy consumption, increased stability and process reliability and lower production cost. The stability of the product bio-oil is fundamental to designing consumer devices such as burners, engines and turbines. This study was motivated to produce Bio-oil, through the conversion of plant biomass or the use of its industrial and agricultural waste, presenting an alternative proposal for thermochemical pyrolysis process, taking advantage of particle dynamics in the rotating bed that favors the right gas-solid contact and heat transfer and mass. The pyrolyser designed to operate in a continuous process, a feeder containing two stages, a divisive system of biomass integrated with a tab of coal fines and a system of condensing steam pyrolytic. The prototype has been tested with sawdust, using a complete experimental design on two levels to investigate the sensitivity of factors: the process temperature, gas flow drag and spin speed compared to the mass yield of bio-oil. The best result was obtained in the condition of 570 oC, 25 Hz and 200 cm3/min, temperature being the parameter of greatest significance. The mass balance of the elementary stages presented in the order of 20% and 37% liquid pyrolytic carbon. We determined the properties of liquid and solid products of pyrolysis as density, viscosity, pH, PCI, and the composition characterized by chemical analysis, revealing the composition and properties of a Bio-oil.

Degradacao termica e catalitica da borra oleosa de Petroleo com materiais nanoestruturados al-mcm-41 e AL-SBA-15

Aiming to reduce and reuse waste oil from oily sludge generated in large volumes by the oil industry, types of nanostructured materials Al-MCM-41 and Al-SBA-15, with ratios of Si / Al = 50, were synthesized , and calcined solids used as catalysts in the degradation of oily sludge thermocatalytic oil from oilfield Canto do Amaro, in the state of Rio Grande do Norte. Samples of nanostructured materials were characterized by thermogravimetric analysis (TG / DTG), X-ray diffraction (XRD), scanning electron microscopy (SEM), absorption spectroscopy in the infrared Fourier transform (FT-IR) and adsorption nitrogen (BET). The characterization showed that the synthesized materials resulted in a catalyst nanostructure, and ordered pore diameter and surface area according to existing literature. The oily sludge sample was characterized by determining the API gravity and sulfur content and SARA analysis (saturates, aromatics, resins and asphaltenes). The results showed a material equivalent to the average oil with API gravity of 26.1, a low sulfur content and considerable amount of resins and asphaltenes, presented above in the literature. The thermal and catalytic degradation of the oily sludge oil was performed from room temperature to 870 ° C in the ratios of heating of 5, 10 and 20 ° C min-1. The curves generated by TG / DTG showed a more accelerated degradation of oily sludge when it introduced the nanostructured materials. These results were confirmed by activation energy calculated by the method of Flynn-Wall, in the presence of catalysts reduced energy, in particular in the range of cracking, showing the process efficiency, mainly for extraction of lightweight materials of composition of oily sludge, such as diesel and gasoline

Pirólise de borras oleosas de petroleo utilizando nanomateriais

The oily sludge is a complex mix of hydrocarbons, organic impurities, inorganic and water. One of the major problems currently found in petroleum industry is management (packaging, storage, transport and fate) of waste. The nanomaterials (catalysts) mesoporous and microporous are considered promising for refining and adsorbents process for environment protection. The aim of this work was to study the oily sludge from primary processing (raw and treated) and vacuum residue, with application of thermal analyses technique (pyrolysis), thermal and catalytic pyrolysis with nanomaterials, aiming at production petroleum derived. The sludge and vacuum residue were analyzed using a soxhlet extraction system, elemental analysis, thin layer chromatography, thermogravimetry and pyrolysis coupled in gas chromatography/mass spectrometry (Py GC MS). The catalysts AlMCM-41, AlSBA-15.1 e AlSBA-15.2 were synthesized with molar ratio silicon aluminum of 50 (Si/Al = 50), using tetraethylorthosilicante as source of silicon and pseudobuhemita (AlOOH) as source of aluminum. The analyzes of the catalysts indicate that materials showed hexagonal structure and surface area (783,6 m2/g for AlMCM-41, 600 m2/g for AlSBA-15.1, 377 m2/g for AlSBA-15.2). The extracted oily sludge showed a range 65 to 95% for organic components (oil), 5 to 35% for inorganic components (salts and oxides) and compositions different of derivatives. The AlSBA-15 catalysts showed better performance in analyzes for production petroleum derived, 20% increase in production of kerosene and light gas oil. The energy potential of sludge was high and it can be used as fuel in other cargo processed in refinery

Prevalência da infecção genital pelo vírus herpes simples tipo 1 e 2 em mulheres grávidas e não grávidas de Natal/RN

Herpes simplex is a virus that can be transmitted sexually and is potentially associated with vertical transmission. This study evaluated the prevalence of genital infection by herpes simplex virus (HSV) types 1 and 2 in pregnant and nonpregnant care in the city of Natal / RN, including a total of 222 women, 92 pregnant and 130 nonpregnant. The participants answered a questionnaire to obtain data and socio-demographic characteristics, as well as potential risk factors for sexually transmitted diseases. After the interview, we collected two cervical specimens, one for the Pap test and the other for DNA extraction and analyzed by polymerase chain reaction (PCR) to detect both virus serotypes. Then the women underwent a clinical examination by colposcopy. For statistical analysis, we used the chi-square and logistic regression by SSPS 17.0 Statistic. Most women were up to 30 years of age, nonwhite ethnicity, married, elementary education, family income below the poverty level; initiated sexual activity with age up to 18 years; had more than one sexual partner lifelong and was not pregnant, but has had at least one child. The HSV-1 showed a prevalence of 26.1% among pregnant women and 30.0% in non-pregnant women. While HSV-2 prevalence was found with 10.9% and 19.2% in pregnant and nonpregnant women, respectively. The largest proportion of morphological changes of the uterine cervix was detected among nonpregnant women, both in cytology and in colposcopy. The women were nonwhite ethnicity, married, became pregnant aged less than or equal to 18 years and who had one to two pregnancies had a lower risk of acquiring genital HSV infection. There was a high prevalence of genital HSV infection, HSV-1 is more prevalent than HSV-2. No association was found between morphological changes of the uterine cervix and the presence of the virus in pregnant and nonpregnant women, nor between genital HSV infection and the classic risk factors for sexually transmitted diseases

Qualidade de vida do servidor da Universidade Federal do Rio Grande do Norte em condição crônica de saúde

The study aimed to analyze the influence of chronic health conditions (CHC) on quality of life (QOL) of UFRN servers assaulted by CHC. It is a descriptive and cross-sectional study with prospective data and quantitative approach, accomplished in the ambulatory clinic of the Department of Server Assistance (DSA) of the Pro-Rectory of Human Resources, during three months. The sample was composed by accessibility, totaling 215 people, being 153 active and 62 inactive servers, in chronic health condition. The data were collected through the application of the sociodemographic characterization, health, environmental and laboral form, the Medical Outcome Study 36-Item Short Form (SF-36). The study was evaluated by the HUOL Ethics Committee (CAAE no. 0046.0.294.000.10), obtaining assent. The results were analyzed in the SPSS 15.0 program through the descriptive and inferential statistics. It was identified servants predominantly male (59,1%), under 60 years old, married or in stable union, Catholics, brown color, living in the capital and residents in own home. Regarding labor issues, there was a predominance of active servers technical-administrative with intermediate and medium level positions and small proportion of docents. Among the CHC, the non-communicable diseases - NCDs (95.8%) had a higher frequency, followed by persistent mental disorders - PMDs (18.6%) and, finally, the continuous and structural physical deficiency - CSPD (16.9 %). The QOL of servers was considered good, with a mean score of 72.5 points in the total score, with the most affected domains: physical (59.1), general health (66.2), bodily pain (66.3) and functional aspects (72.0). The mental health dimension (76.5) had a better average than the physical dimension (68.0 points). It was found that the decrease in QOL scores is significant statistically related to higher number of CHC (ρ <0.001), with no statistical significance regarding the functional situation (p = 0.259). The administrative technicians of elementary, primary, secondary levels and docents had the worst QOL scores. After the correlation analysis of CHC with the domains and dimensions of the SF-36, there was statistically significant, negative and weak correlation of the domains: functional aspect (ρ = 0.002, r = -0.207), physical aspects (ρ = 0.007; r = -0.183), vitality (ρ = 0.002, r = -0.213), social function (ρ = 0.000, r = -0.313), emotional aspects (ρ = 0.000, r = -0.293), mental health (ρ = 0.000 , r = -0.238), physical health dimension (ρ = 0.002, r = -0.210) and mental health dimension (ρ = 0.000, r = -0.298). The presence of PMD isolated or together, contributed to a lower SF-36 scores, being the domains variation of mean significant, except for bodily pain, general health and physical aspects. By correlating the categories of CHC and QOL, there was a weak correlation (r ≤ -0.376) and significant (ρ ≤ 0.011), mainly related to the NCD, PMDs and NCD + PMD, affecting the mental health, social function, emotional aspects, vitality and functional aspect domains. Front of the results, it was concludes that the servers quality of life is influenced by the CHC. Thus, it was inferred that the presence of CHC causes a negative effect on quality of life, leading the active and inactive servers to exposure their overall life activities and work over the years, due to the morbidity affected, mainly related to NCDs and PMDs. Descriptors: Quality of life. Chronic disease. Occupational Health. Nursing

Estudo de adulteração em méis brasileiros através de razão isotópica do carbono

Neste trabalho, objetivou-se analisar isotopicamente méis comercializados nas regiões Sul e Sudeste do Brasil, para a detecção de fraude. Foram colhidas amostras comerciais com registro no Serviço de Inspeção Federal, Estadual ou Municipal. As amostras foram submetidas à combustão no Analisador Elementar EA 1108 CHN e analisadas no espectrômetro de massas de razão isotópica DELTA-S (Finningan Mat). Os valores isotópicos (δ13C) dos méis in natura foram comparados aos de suas respectivas proteínas (padrão interno). Foram consideradas adulteradas as amostras cuja diferença entre o valor isotópico da proteína e do mel foi igual ou inferior a -1 . As amostras consideradas adulteradas pela análise isotópica foram submetidas a testes químicos qualitativos que não foram capazes de indicar adulteração para algumas delas. Das 61 amostras analisadas, 18,0% encontram-se adulteradas, sendo 11,5% na Região Sudeste e 6,5% na Região Sul. Ao contrário dos testes químicos, a análise isotópica mostrou-se eficaz em identificar e quantificar a adulteração de méis comerciais.

O erotismo mítico da ninfeta

This dissertation establishes a viewpoint in the Social Cience Field of the Nymphs image in the romanesque construction of the twentieth century based in modern archaeology. Our literary corpus is constitututed by the book of the russian author callled Wladimir Nabokov entlited Lolita and the book Presença de Anita, from a brazilian author called Mario Donato. Both works had a singular repercussion involving an erotic conception wich was faced as pornographic and baffling. We appeal to Georges Bataille‟s and Foucault‟s discussion in order to observe it through an erotic viewpoint from an inner experience not submitted to normalizations. Such experiences provoke a feeling of something unknown and it reflects wild singularities proposed by Foucault and related with many misunderstanding things presented in institutions and cultures. Furthemore Bataille‟s conception about erotism will give us conditions to analyze nymphs‟ bodies in order to see themselves from their main characteristics, such as seduction and tempting and maligning forces. We still aim to focus the paradigm of mankind and nature in the direction presented by Edgar Morin. He analyzes some feelings that nymphs provoke and their relation between men and death. In adittion, we present in this issue some questions between culture and biology, focusing on the initial period of larva (wich means the beggining), bringing up what is ready to be born, a mythical and significant body shown in the media. Lolita in the cinema and A Presença de Anita in the TV was disturbing in society and it projected the possibility of a syntaxes of desire. It can has a symbolic purpose or it can be a kind of social and cultural phenomenon, wich is an object of representation. Our purpose is to immersion/emerge in the Nimphs‟s body with adventure and its risks at the same time in wich we are crossing frontiers

Nitrogênio, fósforo, potássio, adubo orgânico e calcário dolomítico na produção de sementes de grama-batatais (Paspalum notatum Flügge) em Latossol Vermelho Escuro

Comparou-se a produção de sementes de grama-batatais em Latossol vermelho Escuro com ou sem adição de sulfato de amônio (4g de N/m²), superfosfato simples (50g de P2O5/m²), cloreto de potássio (15g de K2O/m²), esterco de equino (10 litros/m²) e calcário dolomítico (220 g/m²). As produções foram avaliadas através de número de espigas por área, peso total de sementes, peso de sementes puras, relação entre peso de sementes puras e peso total de sementes, peso de 1000 sementes puras, peso total de sementes por espiga, peso de sementes puras por espiga, porcentagem de germinação das sementes e velocidade de emergência das plântulas. Foram determinados os teores de nitrogênio, fósforo, potássio, cálcio, magnésio, enxofre, boro, cobre, ferro, manganês e zinco na matéria seca de folhas e sementes. Verificou-se que a produção de sementes, tanto em quantidade como em qualidade, foi influenciada pela nutrição mineral. As porcentagens mais elevadas de carbono no solo estiveram associadas a maior quantidade e melhor qualidade das sementes produzidas. As melhores produções de sementes correspondem aos níveis mais baixos de fósforo, potássio, cálcio e zinco nas folhas. Verificou-se serem importantes nas características avaliadas as seguintes relações entre teores de nutrientes nas folhas ou nas sementes: N/P, P/Ca, P/Mg, P/S, P/Zn, K/Ca, K/Mg, K/B, Ca/Mg, Ca/B, Fe/Mn, Zn/Cu, Zn/Fe e Zn/Mn. Nas maiores produções, as sementes apresentaram concentrações menores de nitrogênio, boro e cobre, e mais elevadas de cálcio. As sementes de melhor qualidade apresentaram maiores concentrações de zinco e menores de boro. A aplicação de adubos ou calcário dolomítico não melhorou significativamente a produção de sementes.

Teoria da despesa pública: uma leitura ético-constitucional em busca do possível da reserva

Brazilian law passes through a crisis of effectiveness commonly attributed to the extravagance of fundamental rights and public shortage. However, public finances are not dogmatically structured to solve the conflicts around the limitations of public spending. There are ethical conditioning factors, like morality, proportionality and impartiality, however, these principles act separately, while the problem of public shortage is holistic. Also, the subjectivity of politics discretionary in the definition of public spending, which is supported in an indeterminate concept of public interest, needs material orientation about the destination of public funds, making it vulnerable to ideological manipulation, resulting in real process of catching rights. Not even the judicial activism (such as influx of constitutionalism) is shown legally appropriate. The Reserve of Possible, also presents basic ethical failure. Understanding the formation of public shortage is therefore essential for understanding the crisis of effectiveness of state responsibilities, given the significant expansion of the state duty of protection, which does not find legal technique of defense of the established interests. The premise of argument, then, part of the possibility of deducting minimal model ethical of desire to spend (public interest) according to objective parameters of the normative system. Public spending has always been treated disdainfully by the Brazilian doctrine, according to the legal character accessory assigned to the monetary cost. Nonetheless, it is the meeting point between economics and law, or is in the marrow of the problem of public shortage. Expensive Subjects to modernity, as the effectiveness of fundamental rights, pass necessarily an ethical legal system of public spending. From the ethical principles deducted from the planning, only the democratic principle guides the public spending through the approval of public spending in the complex budget process. In other words, there is an ethical distancing of economic reality in relation to state responsibilities. From the dogmatic belief of insufficiency, public spending is evaluated ethically, according to the foundations of modern constitutionalism, in search of possible of the financial reserve, certain that the ethics of public economy is a sine qua non condition for legal ethics.

Impacto de quatro substratos e parcelamento da fertirrigação na produção de tomate sob cultivo protegido

Analisou-se a produção do tomateiro, híbrido longa vida Carmen, cultivado em quatro substratos, com fertirrigação semanal e duas vezes por semana. O delineamento experimental utilizado foi blocos casualizados, em esquema fatorial 4 x 2 (quatro substratos e duas formas de fertirrigação), em quatro repetições. Os substratos testados foram: S1 = areia fina (0,250 - 0,105 mm); S2 = 1/2 areia fina + 1/2 bagaço de cana-de-açúcar; S3 = 1/2 areia fina + 1/2 casca de amendoim moída (passada em peneira com abertura de 7 x 18 mm) e S4 = 1/3 areia fina + 1/3 bagaço de cana-de-açúcar + 1/3 casca de amendoim moída. As fertirrigações avaliadas foram: F1 = fertirrigação realizada uma vez por semana, com aplicação da quantidade total de nutrientes e, F2 = fertirrigação realizada duas vezes por semana, com aplicação da metade da quantidade total de nutrientes, demandada por semana, em cada vez. A quantidade de nutrientes, em mg L-1, fornecida por meio de fertirrigação, foi: 200 de nitrogênio, 60 de fósforo, 350 de potássio, 206 de cálcio, 60 de magnésio, 150 de enxofre, 0,50 de boro, 0,10 de cobre, 2 de ferro, 0,75 de manganês, 0,10 de zinco e 0,01 de molibdênio. A dotação hídrica foi realizada em função dos dados obtidos em um tanque classe A, localizado no centro da casa de vegetação. Avaliou-se a altura das plantas, o número de cachos e de frutos por planta, o peso individual do fruto e a produção por planta. Os dados foram submetidos à análise de variância e as médias foram comparadas pelo teste de Tukey, ao nível de 5% de probabilidade. Verificou-se que a fertirrigação realizada duas vezes por semana, suprindo a demanda total de nutrientes da semana, resultou em consideráveis melhorias de produção. Os substratos utilizados, com exceção do substrato S2, apresentaram potencial de uso para o cultivo do tomateiro em ambiente protegido.