Influence of Water Content and Temperature on Molecular Mobility and Intracellular Glasses in Seeds and Pollen1

Although the occurrence of intracellular glasses in seeds and pollen has been established, physical properties such as rotational correlation times and viscosity have not been studied extensively. Using electron paramagnetic resonance spectroscopy, we examined changes in the molecular mobility of the hydrophilic nitroxide spin probe 3-carboxy-proxyl during melting of intracellular glasses in axes of pea (Pisum sativum L.) seeds and cattail (Typha latifolia L.) pollen. The rotational correlation time of the spin probe in intracellular glasses of both organisms was approximately 10−3 s. Using the distance between the outer extrema of the electron paramagnetic resonance spectrum (2Azz) as a measure of molecular mobility, we found a sharp increase in mobility at a definite temperature during heating. This temperature increased with decreasing water content of the samples. Differential scanning calorimetry data on these samples indicated that this sharp increase corresponded to melting of the glassy matrix. Molecular mobility was found to be inversely correlated with storage stability. With decreasing water content, the molecular mobility reached a minimum, and increased again at very low water content. Minimum mobility and maximum storage stability occurred at a similar water content. This correlation suggests that storage stability might be at least partially controlled by molecular mobility. At low temperatures, when storage longevity cannot be determined on a realistic time scale, 2Azz measurements can provide an estimate of the optimum storage conditions.

Local nitric oxide production in viral and autoimmune diseases of the central nervous system.

Because of the short half-life of NO, previous studies implicating NO in central nervous system pathology during infection had to rely on the demonstration of elevated levels of NO synthase mRNA or enzyme expression or NO metabolites such as nitrate and nitrite in the infected brain. To more definitively investigate the potential causative role of NO in lesions of the central nervous system in animals infected with neurotropic viruses or suffering from experimental allergic encephalitis, we have determined directly the levels of NO present in the central nervous system of such animals. Using spin trapping of NO and electron paramagnetic resonance spectroscopy, we confirm here that copious amounts of NO (up to 30-fold more than control) are elaborated in the brains of rats infected with rabies virus or borna disease virus, as well as in the spinal cords of rats that had received myelin basic protein-specific T cells.

Metallothionein protects against the cytotoxic and DNA-damaging effects of nitric oxide.

In inflammatory states, nitric oxide (.NO) may be synthesized from precursor L-arginine via inducible .NO synthase (iNOS) in large amounts for prolonged periods of time. When .NO acts as an effector molecule under these conditions, it may be toxic to cells by inhibition of iron-containing enzymes or initiation of DNA single-strand breaks. In contrast to molecular targets of .NO, considerably less is known regarding mechanisms by which cells become resistant to .NO. Metallothionein (MT), the major protein thiol induced in cells exposed to cytokines and bacterial products, is capable of forming iron-dinitrosyl thiolates in vitro. Therefore, we tested the hypothesis that overexpression of MT reduces the sensitivity of NIH 3T3 cells to the .NO donor, S-nitrosoacetylpenicillamine (SNAP), and to .NO released from cells (NIH 3T3-DFG-iNOS) after infection with a retroviral vector expressing human iNOS gene. There was a 4-fold increase in MT in cells transfected with the mouse MT-1 gene (NIH 3T3/MT) compared to cells transfected with the promoter-free inverted gene (NIH 3T3/TM). NIH 3T3/MT cells were more resistant than NIH 3T3/TM cells to the cytotoxic effects of SNAP (0.1-1.0 mM) or .NO released from NIH 3T3-DFG-iNOS cells. A brief (1 h) exposure to 10 mM SNAP caused DNA single-strand breaks that were 9-fold greater in NIH 3T3/TM compared to NIH 3T3/MT cells. Electron paramagnetic resonance spectroscopy of NIH 3T3 cells revealed a greater peak at g = 2.04 (e.g., iron-dinitrosyl complex) in NIH 3T3/MT than NIH 3T3/TM cells. These data are consistent with a role for cytoplasmic MT in interacting with .NO and reducing .NO-induced cyto- and nuclear toxicity.

Structural Polymorphism in Tau Filaments: An Implication for Neurodegenerative Diseases

Tau filaments are the pathological hallmark of >20 neurodegenerative diseases including Alzheimer's disease, Pick's disease, and progressive supranuclear palsy. In the adult human brain, six isoforms of tau are expressed that differ by presence or absence of the second of the four semiconserved repeats. As a consequence, half of the tau isoforms have three repeats (3R tau), whereas the other half has four repeats (4R tau). Site-directed spin labeling of recombinant tau in conjunction with electron paramagnetic resonance spectroscopy was used to obtain structural insights into tau filaments. The studies showed that the filaments of 4R tau and 3R tau share a highly ordered core structure in the third repeat with parallel, in-register arrangement of beta-strands. This structure in 3R and 4R is conserved regardless of whether full-length isoforms (htau40 and htau23) or truncated constructs (K18 and K19) are used. When mixed, 3R tau and 4R tau coassembled into heterogeneous filaments. Hence, these findings indicate that there are at least three compositionally distinct types of filaments: homogeneous 3R tau, homogeneous 4R tau, and heterogeneous 3R/4R tau. In vitro experiments show that the seeded filament growth, a prerequisite for tau spreading in tissue culture and brain, is crucially dependent on the isoform composition of individual seeds. Seeds of 3R tau and 3R/4R tau recruit both types of isoforms whereas seeds of 4R tau can recruit 4R tau, but not 3R tau, establishing an asymmetric barrier. Conformational templating of 4R tau onto 3R tau seeds eliminates this barrier, giving rise to a new type of tau filament. Conformational studies at the molecular level of tau filaments were done using Double electron-electron resonance spectroscopy, which allows the determination of distances between pairs of spin labels. These studies revealed structural differences between filaments of 3R tau and 4R tau. Furthermore, they indicated that 4R tau assumed the conformation of 3R tau when templated on 3R tau seeds. Our measurements have also provided insights into the heterogeneity of tau filament structure. Conformational differences due to variation in filament composition and seeding properties of tau filaments have shown that they are structurally polymorphic in nature. This structural polymorphism of tau filaments has widespread implications in understanding and treatment of neurodegenerative diseases.

Nitrato na dieta de ruminantes como estratégia nutricional para mitigação de metano entérico

A produção de metano entérico está entre as principais fontes de emissão de gases de efeito estufa dentre as atividades agropecuárias, além de gerar perda energética ao animal de até 12% da energia bruta consumida. Assim, o objetivo deste trabalho foi avaliar o uso de nitrato de cálcio encapsulado na alimentação de ruminantes como estratégia nutricional a mitigação de metano entérico. O experimento consistiu de duas fases. Fase I: Foram testadas dietas suplementadas com produto comercial de nitrato de cálcio encapsulado utilizando a técnica semiautomática de produção de gases in vitro. Meio grama de substrato com 50 mL de meio de incubação e 25 mL de inóculo ruminal foram incubados em frascos de vidro (160 mL) à 39 ºC por 24 horas para determinação da melhor dieta a ser testada in vivo. O primeiro ensaio testou a associação entre a monensina (dietas com e sem adição de monensina) e doses de nitrato encapsulado (0; 1,5 e 3% da matéria seca (MS)) para mitigação de metano in vitro. Não foi observada interação entre monensina e nitrato para as variáveis testadas. O segundo ensaio in vitro testou a interação do tipo de dieta com duas relações concentrado:volumoso, 20:80 e 80:20, e a inclusão de doses de nitrato encapsulado (0; 1,5; 3 e 4,5% MS). Embora não foi observado efeito associativo entre dieta e nitrato para redução de metano, foi observada mudança nos produtos da fermentação ruminal, com redução de propionato, em decorrência da concorrência de nitrato e propianogênicas por hidrogênio mais escasso em dietas com menor fermentação. Fase II: Conforme os resultados obtidos na Fase I, na segunda fase foi avaliado o efeito associativo da relação de concentrado:volumoso da dieta e a dose de nitrato sobre a emissão de metano, constituintes ruminais e toxicidade do nitrato in vivo. Utilizou-se seis borregos canulados no rúmen, distribuídos em delineamento experimental quadrado latino 6 x 6, em fatorial 2 x 3. Os fatores foram tipo de dieta (relação concentrado:volumoso 20:80 e 80:20) e inclusão de doses de nitrato encapsulado na dieta (0; 1,5 e 3% MS) em substituição gradual ao farelo de soja, totalizando seis tratamentos. Os teores de substituição do farelo de soja pelo nitrato foram em equivalente proteico de maneira a deixar as dietas isonitrogenadas. Os animais foram adaptados gradualmente a oferta de nitrato dietético para evitar problemas com toxidez. A análise de toxicidade foi avaliada pela taxa de metahemoglobina no sangue dos ovinos 3 horas após a alimentação. Nitrato reduziu a produção de metano em ambas as dietas. Os níveis de metahemoglobina no sangue dos animais não foram alterados pela adição de nitrato. Foi observado efeito associativo entre o tipo de dieta e nitrato para os produtos da fermentação ruminal, como acetato, que aumentou linearmente nas dietas com 80% de concentrado quando nitrato foi adicionado. Concluí-se que nitrato, utilizado de forma segura, é uma promissora estratégia para redução de metano entérico independentemente do tipo de dieta com que está sendo suplementado

Desempenho propulsivo de embarcações de pesca: estudo aplicado à melhoria das embarcações do Espírito Santo.

Este trabalho apresenta um procedimento simples e robusto para avaliação e análise do desempenho de instalações propulsoras de embarcações de pesca operando no Estado do Espírito Santo. O objetivo é verificar se as embarcações estão operando com baixa eficiência propulsiva, portanto, com consumo de combustível maior do que o desejável, e identificar possíveis ações de melhoria desta eficiência que poderiam ser implementadas com baixo custo. Tendo em vista as condições artesanais da construção e operação das embarcações de pesca no Espírito Santo, o procedimento foi desenvolvido de forma a poder ser aplicado com relativa facilidade pelas pessoas envolvidas na atividade pesqueira artesanal neste Estado. O procedimento envolve o levantamento de informações sobre a geometria do casco, as características da instalação propulsora existente e sobre alguns aspectos do desempenho das embarcações. Para este levantamento são propostos métodos e técnicas suficientemente simples para que possam ser facilmente aplicadas nos estaleiros. Com base nestes dados levantados implementou-se no procedimento proposto diversos algoritmos que permitem determinar o coeficiente propulsivo das embarcações de pesca e a perda de energia útil que ocorre tanto no motor, por conta de condições inadequadas de operação, quanto na transmissão desta energia para o hélice. Para a validação dos métodos e técnicas envolvidos neste procedimento e dos resultados fornecidos por ele, o mesmo foi aplicado em alguns cascos de embarcações de pesca disponíveis em estaleiros visitados no Estado. Para uma destas embarcações o procedimento foi aplicado em sua totalidade, permitindo identificar a baixa eficiência da instalação propulsora e algumas das possíveis causas que provocam a perda de energia útil no sistema. Finalmente, com base nesse exemplo de aplicação, um estudo de possíveis melhorias na instalação propulsora é apresentado ao final do trabalho.

Life Experiences of People Affected by Crohn’s Disease and Their Support Networks Scoping Review

This scoping review identifies and describes relevant studies related to the evidence published on life experiences and perceived social support of people affected by Crohn’s disease. Twenty-three studies were definitely selected and analyzed for the topics explored. The overall findings show patients’ needs and perceptions. There is a lack of evidence about patients’ perceived needs as well as the understanding of social support that has contributed to improve their life experiences with that chronic illness. Lack of energy, loss of body control, body image damaged due to different treatments and surgeries, symptoms related to fear of disease, feeling burdened loss related to independence, and so on are some of the concerns with having to live with those affected by the Crohn. To underline those experiences through this scoping review provides valuable data for health care teams, especially for the nursing profession, considered by those affected as one of the main roles along the whole pathological process. This review provides the basis for developing broader research on the relatively underexplored topics and consequently improves specific programs that could address patients’ needs.

A study of field emission from cadmium sulphide

It was decided to investigate field emission from cadmium sulphide because many workers have found that the agreement between theory and experiment for this material, and other semiconductors, is poor. An electron energy analyser, similar to those used in most of the previously reported experiments, was, therefore, built. The performance of the analyser was thoroughly investigated both theoretically and practically and the results of these investigations were used in conjunction with a tungsten emitter. Excellent agreement was obtained between the usually accepted total energy distribution for tungsten and the corresponding .distribution measured with the present analyser. A method of obtaining reliable cadmium sulphide emitter was developed. These emitters were then used in the analyser and it was found that the agreement between theory and experiment was poor. Previous explanations of the lack of agreement are considered and are found to be doubtful. The theory of field emission from semiconductors is reviewed and possible reasons for the discrepancy between theory and experiment are proposed. Finally, further experiments are described which should prove or disprove the conclusions arrived at in this work.

Vibrational methods applied to NDT testing and fluid density measurement

A system for the NDI' testing of the integrity of conposite materials and of adhesive bonds has been developed to meet industrial requirements. The vibration techniques used were found to be applicable to the development of fluid measuring transducers. The vibrational spectra of thin rectangular bars were used for the NDT work. A machined cut in a bar had a significant effect on the spectrum but a genuine crack gave an unambiguous response at high amplitudes. This was the generation of fretting crack noise at frequencies far above that of the drive. A specially designed vibrational decrement meter which, in effect, measures mechanical energy loss enabled a numerical classification of material adhesion to be obtained. This was used to study bars which had been flame or plasma sprayed with a variety of materials. It has become a useful tool in optimising coating methods. A direct industrial application was to classify piston rings of high performance I.C. engines. Each consists of a cast iron ring with a channel into which molybdenum, a good bearing surface, is sprayed. The NDT classification agreed quite well with the destructive test normally used. The techniques and equipment used for the NOT work were applied to the development of the tuning fork transducers investigated by Hassan into commercial density and viscosity devices. Using narrowly spaced, large area tines a thin lamina of fluid is trapped between them. It stores a large fraction of the vibrational energy which, acting as an inertia load reduces the frequency. Magnetostrictive and piezoelectric effects together or in combination enable the fork to be operated through a flange. This allows it to be used in pipeline or 'dipstick' applications. Using a different tine geometry the viscosity loading can be predoninant. This as well as the signal decrement of the density transducer makes a practical viscometer.

Mechanisms for triggering high-voltage breakdown in vacuum

The electrical and optical characteristics of a cylindrical alumina insulator (94% Al203) have been measured under ultra-high vacuum (P < 10-8 mBar) conditions. A high-resolution CCD camera was used to make real-time optical recordings of DC prebreakdown luminescence from the ceramic, under conditions where DC current magnitudes were limited to less than 50μA. Two concentric metallized rings formed a pair of co-axial electrodes, on the end-face of the alumina tube; a third 'transparent' electrode was employed to study the effect of an orthogonal electric field upon the radial conduction processes within the metallized alumina specimen. The wavelength-spectra of the emitted light was quantified using a high-speed scanning monochromator and photo-multiplier tube detector. Concurrent electrical measurements were made alongside the recording of optical-emission images. An observed time-dependence of the photon-emission is correlated with a time-variation observed in the DC current-voltage characteristics of the alumina. Optical images were also recorded of pulsed-field surface-flashover events on the alumina ceramic. An intensified high-speed video technique provided 1ms frames of surface-flashover events, whilst 100ns frames were achieved using an ultra high-speed fast-framing camera. By coupling this fast-frame camera to a digital storage oscilloscope, it was possible to establish a temporal correlation between the application of a voltage-pulse to the ceramic and the evolution of photonic emissions from the subsequent surface-flashover event. The electro-optical DC prebreakdown characteristics of the alumina are discussed in terms of solid-state photon-emission processes, that are believed to arise from radiative electron-recombination at vacancy-defects and substitutional impurity centres within the surface-layers of the ceramic. The physical nature of vacancy-defects within an alumina dielectric is extensively explored, with a particular focus placed upon the trapped electron energy-levels that may be present at these defect centres. Finally, consideration is given to the practical application of alumina in the trigger-ceramic of a sealed triggered vacuum gap (TVG) switch. For this purpose, a physical model describing the initiation of electrical breakdown within the TVG regime is proposed, and is based upon the explosive destabilisation of trapped charge within the alumina ceramic, triggering the onset of surface-flashover along the insulator. In the main-gap prebreakdown phase, it is suggested that the electrical-breakdown of the TVG is initiated by the low-field 'stripping' of prebreakdown electrons from vacancy-defects in the ceramic under the influence of an orthogonal main-gap electric field.

Finite element analysis of particle impact problems

Particle impacts are of fundamental importance in many areas and there has been a renewed interest in research on particle impact problems. A comprehensive investigation of the particle impact problems, using finite element (FE) methods, is presented in this thesis. The capability of FE procedures for modelling particle impacts is demonstrated by excellent agreements between FE analysis results and previous theoretical, experimental and numerical results. For normal impacts of elastic particles, it is found that the energy loss due to stress wave propagation is negligible if it can reflect more than three times during the impact, for which Hertz theory provides a good prediction of impact behaviour provided that the contact deformation is sufficiently small. For normal impact of plastic particles, the energy loss due to stress wave propagation is also generally negligible so that the energy loss is mainly due to plastic deformation. Finite-deformation plastic impact is addressed in this thesis so that plastic impacts can be categorised into elastic-plastic impact and finite-deformation plastic impact. Criteria for the onset of finite-deformation plastic impacts are proposed in terms of impact velocity and material properties. It is found that the coefficient of restitution depends mainly upon the ratio of impact velocity to yield Vni/Vy0 for elastic-plastic impacts, but it is proportional to [(Vni/Vy0)*(Y/E*)]-1/2, where Y /E* is the representative yield strain for finite-deformation plastic impacts. A theoretical model for elastic-plastic impacts is also developed and compares favourably with FEA and previous experimental results. The effect of work hardening is also investigated.

Graphene layers produced from carbon nanotubes by frication

Graphene layers have been produced from multi-walled carbon nanotube (MWCNT) bulk materials by friction when polished on ground-glass, offering a novel and effective method to produce graphene layers, which, more importantly, could be transferred to other substrates by rubbing. Field emission scanning electron microscopy, Raman spectroscopy, atomic force microscopy, transmission electron microscopy and selected area electron diffraction confirmed the formation of graphene layers. They were thought to be peeled away from the MWCNT walls due to friction. The reflection spectra showed that absorption of as-produced graphene layers decreased with wavelength in the range of 250–400 nm, compared to the MWCNT bulk material having strong absorption at 350 nm. Nanoscratch test was used to determine the mechanical properties of graphene films, suggesting the tolerance of as-produced graphene film to flaws introduced by scratch.

A catalytic reactor for the trapping of free radicals from gas phase oxidation reactions

A catalytic reactor for the trapping of free radicals originating from gas phase catalytic reactions is described and discussed. Radical trapping and identification were initially carried out using a known radical generator such as dicumyl peroxide. The trapping of radicals was further demonstrated by investigating genuine radical oxidation processes, e.g., benzaldehyde oxidation over manganese and cobalt salts. The efficiency of the reactor was finally proven by the partial oxidation of cyclohexane over MoO3, Cr2O3, and WO3, which allowed the identification of all the radical intermediates responsible for the formation of the products cyclohexanol and cyclohexanone. Assignment of the trapped radicals was carried out using spin trapping technique and X -band electron paramagnetic resonance spectroscopy. © 2010 American Institute of Physics.

Concentration polarization model of spiral-wound membrane modules with application to batch-mode RO desalination of brackish water

Batch-mode reverse osmosis (batch-RO) operation is considered a promising desalination method due to its low energy requirement compared to other RO system arrangements. To improve and predict batch-RO performance, studies on concentration polarization (CP) are carried out. The Kimura-Sourirajan mass-transfer model is applied and validated by experimentation with two different spiral-wound RO elements. Explicit analytical Sherwood correlations are derived based on experimental results. For batch-RO operation, a new genetic algorithm method is developed to estimate the Sherwood correlation parameters, taking into account the effects of variation in operating parameters. Analytical procedures are presented, then the mass transfer coefficient models are developed for different operation processes, i.e., batch-RO and continuous RO. The CP related energy loss in batch-RO operation is quantified based on the resulting relationship between feed flow rates and mass transfer coefficients. It is found that CP increases energy consumption in batch-RO by about 25% compared to the ideal case in which CP is absent. For continuous RO process, the derived Sherwood correlation predicted CP accurately. In addition, we determined the optimum feed flow rate of our batch-RO system.

A Stochastic Approach for Investigation Ultrafast Phenomena in Semiconductors

2002 Mathematics Subject Classification: 65C05