Aprendizaje integrado en arquitectura con modelos virtuales : implementación de metodología BIM en la docencia universitaria

Los procesos de diseño y construcción en Arquitectura han mostrado un desarrollo de optimización históricamente muy deficiente cuando se compara con las restantes actividades típicamente industriales. La aspiración constante a una industrialización efectiva, tanto en aras de alcanzar mayores cotas de calidad así como de ahorro de recursos, recibe hoy una oportunidad inmejorable desde el ámbito informático: el Building Information Modelling o BIM. Lo que en un inicio puede parecer meramente un determinado tipo de programa informático, en realidad supone un concepto de “proceso” que subvierte muchas rutinas hoy habituales en el desarrollo de proyectos y construcciones arquitectónicas. La inclusión y desarrollo de datos ligados al proyecto, desde su inicio hasta el fin de su ciclo de vida, conlleva la oportunidad de crear una realidad virtual dinámica y actualizable, que por añadidura posibilita su ensayo y optimización en todos sus aspectos: antes y durante su ejecución, así como vida útil. A ello se suma la oportunidad de transmitir eficientemente los datos completos de proyecto, sin apenas pérdidas o reelaboración, a la cadena de fabricación, lo que facilita el paso a una industrialización verdaderamente significativa en edificación. Ante una llamada mundial a la optimización de recursos y el interés indudable de aumentar beneficios económicos por medio de la reducción del factor de incertidumbre de los procesos, BIM supone un opción de mejora indudable, y así ha sido reconocido a través de la inminente implantación obligatoria por parte de los gobiernos (p. ej. Gran Bretaña en 2016 y España en 2018). La modificación de procesos y roles profesionales que conlleva la incorporación de BIM resulta muy significativa y marcará el ejercicio profesional de los futuros graduados en las disciplinas de Arquitectura, Ingeniería y Construcción (AEC por sus siglas en inglés). La universidad debe responder ágilmente a estas nuevas necesidades incorporando esta metodología en la enseñanza reglada y aportando una visión sinérgica que permita extraer los beneficios formativos subyacentes en el propio marco BIM. En este sentido BIM, al aglutinar el conjunto de datos sobre un único modelo virtual, ofrece un potencial singularmente interesante. La realidad tridimensional del modelo, desarrollada y actualizada continuamente, ofrece al estudiante una gestión radicalmente distinta de la representación gráfica, en la que las vistas parciales de secciones y plantas, tan complejas de asimilar en los inicios de la formación universitaria, resultan en una mera petición a posteriori, para ser extraída según necesidad del modelo virtual. El diseño se realiza siempre sobre el propio modelo único, independientemente de la vista de trabajo elegida en cada momento, permaneciendo los datos y sus relaciones constructivas siempre actualizados y plenamente coherentes. Esta descripción condensada de características de BIM preconfiguran gran parte de las beneficios formativos que ofrecen los procesos BIM, en especial, en referencia al desarrollo del diseño integrado y la gestión de la información (incluyendo TIC). Destacan a su vez las facilidades en comprensión visual de elementos arquitectónicos, sistemas técnicos, sus relaciones intrínsecas así como procesos constructivos. A ello se une el desarrollo experimental que la plataforma BIM ofrece a través de sus software colaborativos: la simulación del comportamiento estructural, energético, económico, entre otros muchos, del modelo virtual en base a los datos inherentes del proyecto. En la presente tesis se describe un estudio de conjunto para explicitar tanto las cualidades como posibles reservas en el uso de procesos BIM, en el marco de una disciplina concreta: la docencia de la Arquitectura. Para ello se ha realizado una revisión bibliográfica general sobre BIM y específica sobre docencia en Arquitectura, así como analizado las experiencias de distintos grupos de interés en el marco concreto de la enseñanza de la en Arquitectura en la Universidad Europea de Madrid. El análisis de beneficios o reservas respecto al uso de BIM se ha enfocado a través de la encuesta a estudiantes y la entrevista a profesionales AEC relacionados o no con BIM. Las conclusiones del estudio permiten sintetizar una implantación de metodología BIM que para mayor claridad y facilidad de comunicación y manejo, se ha volcado en un Marco de Implantación eminentemente gráfico. En él se orienta sobre las acciones docentes para el desarrollo de competencias concretas, valiéndose de la flexibilidad conceptual de los Planes de Estudio en el contexto del Espacio Europeo de Educación Superior (Declaración de Bolonia) para incorporar con naturalidad la nueva herramienta docente al servicio de los objetivos formativo legalmente establecidos. El enfoque global del Marco de Implementación propuesto facilita la planificación de acciones formativas con perspectiva de conjunto: combinar los formatos puntuales o vehiculares BIM, establecer sinergias transversales y armonizar recursos, de modo que la metodología pueda beneficiar tanto la asimilación de conocimientos y habilidades establecidas para el título, como el propio flujo de aprendizaje o learn flow BIM. Del mismo modo reserva, incluso visualmente, aquellas áreas de conocimiento en las que, al menos en la planificación actual, la inclusión de procesos BIM no se considera ventajosa respecto a otras metodologías, o incluso inadecuadas para los objetivos docentes establecidos. Y es esta última categorización la que caracteriza el conjunto de conclusiones de esta investigación, centrada en: 1. la incuestionable necesidad de formar en conceptos y procesos BIM desde etapas muy iniciales de la formación universitaria en Arquitectura, 2. los beneficios formativos adicionales que aporta BIM en el desarrollo de competencias muy diversas contempladas en el currículum académico y 3. la especificidad del rol profesional del arquitecto que exigirá una implantación cuidadosa y ponderada de BIM que respete las metodologías de desarrollo creativo tradicionalmente efectivas, y aporte valor en una reorientación simbiótica con el diseño paramétrico y fabricación digital que permita un diseño finalmente generativo. ABSTRACT The traditional architectural design and construction procedures have proven to be deficient where process optimization is concerned, particularly when compared to other common industrial activities. The ever‐growing strife to achieve effective industrialization, both in favor of reaching greater quality levels as well as sustainable management of resources, has a better chance today than ever through a mean out of the realm of information technology, the Building Information Modelling o BIM. What may initially seem to be merely another computer program, in reality turns out to be a “process” concept that subverts many of today’s routines in architectural design and construction. Including and working with project data from the very beginning to the end of its full life cycle allows for creating a dynamic and updatable virtual reality, enabling data testing and optimizing throughout: before and during execution, all the way to the end of its lifespan. In addition, there is an opportunity to transmit complete project data efficiently, with hardly any loss or redeveloping of the manufacture chain required, which facilitates attaining a truly significant industrialization within the construction industry. In the presence of a world‐wide call for optimizing resources, along with an undeniable interest in increasing economic benefits through reducing uncertainty factors in its processes, BIM undoubtedly offers a chance for improvement as acknowledged by its imminent and mandatory implementation on the part of governments (for example United Kingdom in 2016 and Spain in 2018). The changes involved in professional roles and procedures upon incorporating BIM are highly significant and will set the course for future graduates of Architecture, Engineering and Construction disciplines (AEC) within their professions. Higher Education must respond to such needs with swiftness by incorporating this methodology into their educational standards and providing a synergetic vision that focuses on the underlying educational benefits inherent in the BIM framework. In this respect, BIM, in gathering data set under one single virtual model, offers a uniquely interesting potential. The three‐dimensional reality of the model, under continuous development and updating, provides students with a radically different graphic environment, in which partial views of elevation, section or plan that tend characteristically to be difficult to assimilate at the beginning of their studies, become mere post hoc requests to be ordered when needed directly out the virtual model. The design is always carried out on the sole model itself, independently of the working view chosen at any particular moment, with all data and data relations within construction permanently updated and fully coherent. This condensed description of the features of BIM begin to shape an important part of the educational benefits posed by BIM processes, particularly in reference to integrated design development and information management (including ITC). At the same time, it highlights the ease with which visual understanding is achieved regarding architectural elements, technology systems, their intrinsic relationships, and construction processes. In addition to this, there is the experimental development the BIM platform grants through its collaborative software: simulation of structural, energetic, and economic behavior, among others, of the virtual model according to the data inherent to the project. This doctoral dissertation presents a broad study including a wide array of research methods and issues in order to specify both the virtues and possible reservations in the use of BIM processes within the framework of a specific discipline: teaching Architecture. To do so, a literature review on BIM has been carried out, specifically concerning teaching in the discipline of Architecture, as well as an analysis of the experience of different groups of interest delimited to Universidad Europea de Madrid. The analysis of the benefits and/or limitations of using BIM has been approached through student surveys and interviews with professionals from the AEC sector, associated or not, with BIM. Various diverse educational experiences are described and academic management for experimental implementation has been analyzed. The conclusions of this study offer a synthesis for a Framework of Implementation of BIM methodology, which in order to reach greater clarity, communication ease and user‐friendliness, have been posed in an eminently graphic manner. The proposed framework proffers guidance on teaching methods conducive to the development of specific skills, taking advantage of the conceptual flexibility of the European Higher Education Area guidelines based on competencies, which naturally facilitate for the incorporation of this new teaching tool to achieve the educational objectives established by law. The global approach of the Implementation Framework put forth in this study facilitates the planning of educational actions within a common perspective: combining exceptional or vehicular BIM formats, establishing cross‐disciplinary synergies, and sharing resources, so as to purport a methodology that contributes to the assimilation of knowledge and pre‐defined competencies within the degree program, and to the flow of learning itself. At the same time, it reserves, even visually, those areas of knowledge in which the use of BIM processes is not considered necessarily an advantage over other methodologies, or even inadequate for the learning outcomes established, at least where current planning is concerned. It is this last category which characterizes the research conclusions as a whole, centering on: 1. The unquestionable need for teaching BIM concepts and processes in Architecture very early on, in the initial stages of higher education; 2. The additional educational benefits that BIM offers in a varied array of competency development within the academic curriculum; and 3. The specific nature of the professional role of the Architect, which demands a careful and balanced implementation of BIM that respects the traditional teaching methodologies that have proven effective and creative, and adds value by a symbiotic reorientation merged with parametric design and digital manufacturing so to enable for a finally generative design.

Digital Innovation Through Partnership Between Nature Conservation Organisations and Academia : A Qualitative Impact Assessment

We would like to thank all interviewees for sharing their experiences of working with academics, and the guest editor and three anonymous reviewers for valuable comments on earlier versions of the work. The research in this paper is supported by the RCUK dot.rural Digital economy Research Hub, University of Aberdeen (Grant reference: EP/G066051/1).

Digital Innovation Through Partnership Between Nature Conservation Organisations and Academia : A Qualitative Impact Assessment

We would like to thank all interviewees for sharing their experiences of working with academics, and the guest editor and three anonymous reviewers for valuable comments on earlier versions of the work. The research in this paper is supported by the RCUK dot.rural Digital economy Research Hub, University of Aberdeen (Grant reference: EP/G066051/1).

STRBase: a short tandem repeat DNA database for the human identity testing community

The National Institute of Standards and Technology (NIST) has compiled and maintained a Short Tandem Repeat DNA Internet Database (http://www.cstl.nist.gov/biotech/strbase/) since 1997 commonly referred to as STRBase. This database is an information resource for the forensic DNA typing community with details on commonly used short tandem repeat (STR) DNA markers. STRBase consolidates and organizes the abundant literature on this subject to facilitate on-going efforts in DNA typing. Observed alleles and annotated sequence for each STR locus are described along with a review of STR analysis technologies. Additionally, commercially available STR multiplex kits are described, published polymerase chain reaction (PCR) primer sequences are reported, and validation studies conducted by a number of forensic laboratories are listed. To supplement the technical information, addresses for scientists and hyperlinks to organizations working in this area are available, along with the comprehensive reference list of over 1300 publications on STRs used for DNA typing purposes.

Guidelines for Forensic Report Writing: Helping Trainees Understand Common Pitfalls to Improve Reports

A forensic report is the primary work product of a forensic psychologist. The aim of a forensic report is to inform and influence the court. Unlike a clinical report, a forensic report influences the outcome of a legal conflict. This means that greater care must be taken in writing the report. The following errors (Grisso, 2010) were used to discuss best practices in forensic report writing: failure to answer the referral question, organization problems, language problems, mixed data and interpretation, inclusion of irrelevant data, over-reliance on a single source of data, improper psychological test use, failure to consider alternative hypotheses, and opinions without sufficient explanation. The purpose of this paper is to provide in one place all the information needed to improve forensic report writing, and to help the reader apply the literature using specific examples. Redacted report samples were collected from psychologists, graduate psychology trainees, teaching assistant experience, and clinical work. Identified errors in these samples were then corrected using the recommendations in the literature. Geared toward graduate psychology trainees, each section should serve both as a tutorial and as a brief checklist to help the reader avoid common pitfalls and assist in promoting better forensic report writing.

Acceptance and Commitment Therapy with Forensic Inpatients

This paper provides a preliminary exploration of the application of Acceptance and Commitment Therapy (ACT) within the context of a forensic hospital. ACT has a reputation for being a clinically flexible and empirically sound therapeutic intervention, which appears uniquely suited for forensic hospital settings. However, no research has been published to date on the use of ACT as a treatment for forensic inpatients. The ACT approach directly aims to help people let go of the unwinnable struggles to control symptoms of mental illness, and instead focus on constructing a "life worth living." ACT interventions can equip forensic patients with the values and flexible behavioral repertoires necessary to lead lives that are personally meaningful and satisfying and do not involve inflicting harm to others. The ACT model also attempts to minimize the therapist-patient hierarchy through an emphasis on the ubiquitous nature of human suffering. This approach can be particularly useful when working with marginalized, treatment-resistant patients. Continued research on the application of ACT with forensic inpatients is recommended.

The Development of an Intervention Tool to Address Challenges in the Medical Treatment of Children with Autism .

Challenges in treating children with an autism spectrum disorder (ASD) in medical settings are identified and discussed. Although research supports interventions for children with ASD including positive reinforcement, environmental modification, and visual supports and systems, limited research on the efficacy of these interventions in medical environments and with specific procedures exists. Based on the available intervention literature, this project proposes a picture schedule reinforcement system for use during blood draw procedures for ASD children with diabetes. Future efforts should include increased education for medical providers and health professionals as psychological interventions continue to inform best practices in care for children with ASD in medical settings.

Using auditory hallucinations as a therapeutic tool.

This paper integrates psychodynamic and cognitive theories understanding of schizophrenia and the function of auditory hallucinations to propose five principles for the successful treatment of auditory hallucinations within schizophrenia; connection, education, collaboration, empowerment, and independence. Pharmacological and biological research is acknowledged and integrated into psychological treatment using case information based on an autobiographical novel by a person diagnosed with schizophrenia.

Trauma Treatment in Forensic Settings: Clinicians' Perspectives, Barriers to Effective Treatment, and Suggestions for Clinical Practice

Between 30% and 90% of the prison population is estimated to have survived traumatic experiences such as sexual, emotional, and physical abuse prior to incarceration (Anonymous, 1999; Fondacaro, Holt, & Powell, 1999; Messina & Grella, 2006; Pollard & Baker, 2000; Veysey, De Cou, & Prescott, 1998). Similarly, information from the Bureau of Justice Statistics (as reported in Warren, 2001) estimated that more than half of the women in state prisons have experienced past physical and sexual abuse. Thus, given the astonishing number of inmates who appear to be victims of some kind of trauma, it seems likely that those who work with these inmates (e.g., prison staff, guards, and treatment providers) will in some way encounter challenges related to the inmates' trauma history. These difficulties may appear in any number of forms including inmates' behavioral outbursts, increased emotionality, sensitivity to triggering situations, and chronic physical or mental health needs (Veysey, et al., 1998). It is also likely that these individuals with trauma histories would benefit greatly from treatment while incarcerated. This treatment could be utilized to minimize symptoms of posttraumatic stress, decrease behavioral problems, and help the inmate function more effectively in society when released from incarceration (Kokorowski & Freng, 2001; Tucker, Cosio, Meshreki, 2003). Few studies have explored the types of trauma treatment that are effective with inmate populations or made specific suggestions for clinicians working in forensic settings (Kokorowski & Freng, 2001). Essentially, there appears to be a large gap in terms of the need for trauma treatment for inmates and the lack of literature addressing what to do about it. However, clinicians across the country seem to be quietly attempting to fulfill this need for trauma treatment with incarcerated populations. They are providing this greatly needed treatment every day. in the face of enormous challenges and often without recognition or the opportunity to share their valuable work with the larger community.

The Use of Therapeutic Assessment with Forensic Populations: Practitioners' Perspectives

Therapeutic Assessment is a semi-structured approach to collaborative assessment developed by Stephen E. Finn and colleagues. In Therapeutic Assessment, psychological assessment is used as a therapeutic intervention (Finn, 2007; Finn & Kamphuis, 2006). The Therapeutic Assessment model differs from traditional assessment with regard to procedure and the roles of both assessor and client. Therapeutic Assessment has yet to be explored in forensic settings, wherein assessors are required to take on a number of varying and conflicting roles. In the current study, five forensic psychologists completed a semi-structured interview to identify their perspectives of Therapeutic Assessment and its utility in forensic contexts. A phenomenological qualitative analysis of the interviews was conducted to derive themes about Therapeutic Assessment, forensic psychology, and the overlap between these two domains. General themes that emerged include (a) the role and the context of the practitioner's work with the forensic population; (b) the potential of using Therapeutic Assessment's paradigm in family law settings; and (c) the increased risk of harm when using Therapeutic Assessment with forensic populations. In addition to these themes, multiple respondents discussed components of collaborative/Therapeutic Assessment that they have found useful with this population. Finally, the implications of these results are discussed.

Intercultural Communication Between Forensic and Clinical Psychologists

While working in clinical and forensic psychology settings, a communication difficulty between the two professions became apparent. Forensic psychologists often appeared cold and callous from the clinical psychologist’s perspective, while clinical psychologists often appeared naïve or too client centered from the forensic psychologist’s perspective. I wondered if viewing each subfield of psychology as a culture could facilitate better communication through intercultural communication. Guided by Intercultural Communication in Contexts (Martin & Nakayama, 2010) in approaching intercultural communication between the two professions, I explored factors contributing to each profession’s cultural identities. Once this was established, I attempted to explore the different ways each culture could communicate more effectively. By recognizing and utilizing the strengths from each profession and understanding the possible pitfalls of one’s own, we may become competent in intercultural communication

Fail-Safe Testing of Web Applications

This dissertation introduces an approach to generate tests to test fail-safe behavior for web applications. We apply the approach to a commercial web application. We build models for both behavioral and mitigation requirements. We create mitigation tests from an existing functional black box test suite by determining failure type and points of failure in the test suite and weaving required mitigation based on weaving rules to generate a test suite that tests proper mitigation of failures. A genetic algorithm (GA) is used to determine points of failure and type of failure that needs to be tested. Mitigation test paths are woven into the behavioral test at the point of failure based on failure specific weaving rules. A simulator was developed to evaluate choice of parameters for the genetic algorithm. We showed how to tune the fitness function and performed tuning experiments for GA to determine what values to use for exploration weight and prospecting weight. We found that higher defect densities make prospecting and mining more successful, while lower mitigation defect densities need more exploration. We compare efficiency and effectiveness of the approach. First, the GA approach is compared to random selection. The results show that the GA performance was better than random selection and that the approach was robust when the search space increased. Second, we compare the GA against four coverage criteria. The results of comparison show that test requirements generated by a genetic algorithm (GA) are more efficient than three of the four coverage criteria for large search spaces. They are equally effective. For small search spaces, the genetic algorithm is less effective than three of the four coverage criteria. The fourth coverage criteria is too weak and unable to find all defects in almost all cases. We also present a large case study of a mortgage system at one of our industrial partners and show how we formalize the approach. We evaluate the use of a GA to create test requirements. The evaluation includes choice of initial population, multiplicity of runs and a discussion of the cost of evaluating fitness. Finally, we build a selective regression testing approach based on types of changes (add, delete, or modify) that could occur in the behavioral model, the fault model, the mitigation models, the weaving rules, and the state-event matrix. We provide a systematic method by showing the formalization steps for each type of change to the various models.

Shared Print Analysis Tool at the Colorado Alliance of Research Libraries

The Colorado Alliance of Research Libraries has launched the Alliance Shared Print Trust and is in the process of developing a shared print analysis tool. The system allows libraries to compare themselves with other libraries that have added their MARC records so that they can easily and quickly determine what records are unique or held in common with other libraries. The comparison system is built on open source tools and has been embedded in the Gold Rush framework. The author provides a brief overview of other shared print analysis tools.

JRNL: Journal Retention and Needs Listing — A Software Tool for Managing Print Journal Archives

The Journal Retention and Needs Listing (JRNL) program: 1) allows libraries to expose lists of print journals for which they have made retention commitments; 2) express needs (or gaps) in their holdings; and 3) communicate offers to fill the gaps in other participating libraries’ holdings. Multiple library consortia and their member libraries use JRNL to facilitate communication between library staff to identify holding commitments, fill gaps, and guide deselection decisions. JRNL is commonly developed and governed by the participating consortia. Currently, those consortia are the Florida Academic Repository (FLARE), the Association of Southeastern Research Libraries (ASERL)/Washington Research Library Consortium (WRLC), and the Western Regional Storage Trust (WEST).

Machine Translation: Translators' Friend or Foe?

This paper discusses the impact of machine translation on the language industry, specifically addressing its effect on translators. It summarizes the history of the development of machine translation, explains the underlying theory that ties machine translation to its practical applications, and describes the different types of machine translation as well as other tools familiar to translators. There are arguments for and against its use, as well as evaluation methods for testing it. Internet and real-time communication are featured for their role in the increase of machine translation use. The potential that this technology has in the future of professional translation is examined. This paper shows that machine translation will continue to be increasingly used whether translators like it or not.