Uso de banda dendrométrica na definição de padrões de crescimento individual em diâmetro de árvores da bacia do Rio Cuieiras.

Este trabalho tem como objetivo analisar padrões de crescimento individual de diversas árvores que ocorrem em duas toposseqüências (direções Norte-Sul e Leste-Oeste), de uma amostra representativa da floresta de terra-firme na Amazônia Central.

Estimativas de parâmetros genéticos para caracteres de frutos em açaizeiros no Amapá.

Com o objetivo de estimar a variabilidade genética e ganhos de seleção em caracteres de frutos em açaizeiros, foram avaliadas 68 progênies provenientes de coleta em populações do município de Afuá e instaladas no Amapá. O experimento foi instalado em blocos ao acaso com duas repetições e quatro plantas úteis por parcela. Foram avaliados os caracteres: diâmetro longitudinal do fruto (DLF); maior diâmetro transversal do fruto (DTMA); menor diâmetro transversal do fruto (DTME); massa de cem frutos (P100) e massa total de frutos no cacho (PTC). Há diferenças significativas entre progênies, o que denota possibilidade de ganhos com a seleção. Em geral, as herdabilidades na média de progênies foram de médias a altas para os caracteres, mas sempre menor para PTC. A relação CVg/CVe foi favorável em DMA e DTME e desfavorável para PTC; as correlações entre os caracteres foram positivas e significativas; o ganho de seleção foi de 16,65% para PTC e entre -1,29% e -7,60%, nos demais caracteres; as progênies selecionadas conseguiram associar os valores desejados nos caracteres avaliados. As conclusões obtidas foram de que há elevada contribuição ambiental na manifestação fenotípica das progênies, sendo que as dimensões métricas dos frutos sofreram menores efeitos ambientais e maior efeito genético; há possibilidade de ganhos genéticos importantes aos programas de melhoramento genético da espécie utilizando-se os caracteres de forma simultânea, apesar dos valores obtidos terem sido baixos, principalmente devido à presença de correlações positivas, nas quais há preferência da redução do tamanho do fruto com aumento de produtividade.

Aceitabilidade de frutos de Passiflora setacea para o consumo in natura.

O BRS PC apresenta frutos ovoides e globosos, com massa de 50 a 60g e com 5,3 cm de comprimento por 3,8cm de diâmetro, casca verde-amarelada e rajadas, apresentando 5 listras longitudinais da base ao ápice do fruto, polpa amarelo creme e sementes pequenas e escuras, fruto aromático, suco doce-acidulado e saboroso (COSTA et al. 2015). Dadas as suas características sensoriais a Passiflora setacea vem ganhando espaço nos mercados dos centros urbanos e constitui-se em uma espécie com potencial comercial notável. O presente trabalho teve por objetivo principal a análise da aceitabilidade do fruto de Passiflora setacea- BRS Pérola do Cerrado.

Tree structure and richness in an Atlantic Forest fragment: distance from anthropogenic and natural edges

Approximately 7.2% of the Atlantic rainforest remains in Brazil, with only 16% of this forest remaining in the State of Rio de Janeiro, all of it distributed in fragments. This forest fragmentation can produce biotic and abiotic differences between edges and the fragment interior. In this study, we compared the structure and richness of tree communities in three habitats - an anthropogenic edge (AE), a natural edge (NE) and the fragment interior (FI) - of a fragment of Atlantic forest in the State of Rio de Janeiro, Brazil (22°50'S and 42°28'W). One thousand and seventy-six trees with a diameter at breast height > 4.8 cm, belonging to 132 morphospecies and 39 families, were sampled in a total study area of 0.75 ha. NE had the greatest basal area and the trees in this habitat had the greatest diameter:height allometric coefficient, whereas AE had a lower richness and greater variation in the height of the first tree branch. Tree density, diameter, height and the proportion of standing dead trees did not differ among the habitats. There was marked heterogeneity among replicates within each habitat. These results indicate that the forest interior and the fragment edges (natural or anthropogenic) do not differ markedly considering the studied parameters. Other factors, such as the age from the edge, type of matrix and proximity of gaps, may play a more important role in plant community structure than the proximity from edges.

Avaliação física do tomate de mesa 'Romana' durante manuseio na pós-colheita

Tomato postharvest losses are very high in Brazil and the goal of this research was to evaluate the effect of handling and the transport of tomato fruits, cultivar Romana on the steps of harvesting, weight and transportation to the packinghouse, pointing some critical points. Tomatoes were harvested at plastic boxes, weighted and shipped to a packinghouse. Fruits taken directly from the plant were determined as reference. The parameters evaluated were weight loss and mechanical injury and tomato physical quality after storage during 21 days. It was observed an increasing on the weight loss, external damage, and postharvest losses, after storage. Handling and transportation were the cause of an increase in 6.6% in external damage and 1.93% of weight loss after storage, when comparing harvested fruits and fruits evaluated on the packing-house. The main reason for postharvest losses was due to mechanical injury caused during transportation mainly due to the compressure force among fruits and against the plastic boxes.

Proposta de mecanismo de lavagem em equipamentos de beneficiamento de tomate de mesa

The cleanness level in fresh market tomatoes cleaning equipment is essential for consumer acceptance and conservation of product quality. However, the washing process in cleaning current equipments demands an excessive volume of water, leading to serious economic and environmental concerns. The objective of this work was to contribute with technical information for the washing system optimization. The conventional washing system currently used in cleaning equipment, which consists of perforated PVC pipes, was compared with a proposed system which uses commercial sprays. Characteristic curves (flow rate versus pressure) for both systems were determined in lab conditions and the respective water consumptions were compared. The results confirmed the excess of water consumption in the conventional washing systems, and the proposed system proved that is possible to reduce it, and the use of sprays allowed the rational use of the water.

Influência do auxílio mecânico na colheita de tomates

Fresh tomato harvest is traditionally made without harvesting aids. The main goal of this research was to evaluate performance parameters of fresh tomato harvesting aid equipment and compare it to traditional harvest, in the state of São Paulo. Therefore, an equipment was developed and the harvest process was evaluated in four different ways: traditional system (harvest system used in Santa Luzia farm, Brotas, SP, Brazil), picker walking with a harvesting aid equipment, picker seated in a harvesting aid equipment and a composition of both systems: two pickers seated and one picker walking in two different velocities ranges. The different systems using harvesting aid showed an average yield by picker more efficient than reference. Harvest system using three pickers showed an increase of 290% on yield average by picker, on the range of 0.5-1.0 fruit per plant, followed by the systems with a walking picker, that increased productivity in 41%, and picker seated harvester, that showed an increase of 35%. These results demonstrate the importance of using a harvesting aid equipment.

Qualidade da classificação do tomate de mesa em unidades de beneficiamento

Quality evaluation of classification was done in two fresh market tomatoes packing house, using electronically and mechanical equipments in two harvest periods, summer and winter seasons. The main goal of this work was to evaluate size and color grading conformity with the standards proposed by the Brazilian Program for Horticulture Modernization and size grading obtainded with the one established by the packer. The cultivar studied was Carmen. The results showed that there was no grade conformity with the fresh tomato quality standards proposed by the Brazilian Program for Horticulture Modernization. The grade conformity obtained when compared with the one programmed by the packer, was only for large sizes, in both equipments. The electronically equipment has presented better performance, over the mechanical, considering grading quality and fruits post-harvest quality. However, the electronically equipment must be constantly monitored to achieve efficiency and investment return. On the other side, for mechanical equipment it will be necessary to review the actual system of size grading, in order to follow the fresh tomato quality standards.

Otimização da eficiência de limpeza em equipamento de beneficiamento de tomate de mesa

The post-harvesting cleaning process in fresh market tomatoes production is essential to the consumer acceptance, since the degree of dirtiness of the fruits is directly related to its quality. However, the washing stage of the cleaning process of commercial packinghouse demands an excessive water volume, bringing serious environmental concerns. The objective of this work was to compare the cleaning efficiency in two cleaning systems through the evaluation of different operational conditions of the cleaning process, related with the brush rotation, water flow and fruit standing time under the system. It was compared the conventional system utilized in commercial equipment with a system using commercial sprays. The results showed that the cleaning efficiency was not directly related to the water volume used, but to the water pressure, standing time and brushes rotation. Therefore, the use of commercial sprays can bring benefits to the cleaning efficiency, increasing it up to 13%, and to the environmental, decreasing water consumption.

Estimativa de parâmetros biofísicos de plantios de café a partir de imagens orbitais de alta resolução espacial

Remote sensing data are each time more available and can be used to monitor the vegetal development of main agricultural crops, such as the Arabic coffee in Brazil, since that the relationship between spectral and agronomical data be well known. Therefore, this work had the main objective to assess the use of Quickbird satellite images to estimate biophysical parameters of coffee crop. Test area was composed by 25 coffee fields located between the cities of Ribeirão Corrente, Franca and Cristais Paulista (SP), Brazil, and the biophysical parameters used were row and between plants spacing, plant height, LAI, canopy diameter, percentage of vegetation cover, roughness and biomass. Spectral data were the reflectance of four bands of QUICKBIRD and values of four vegetations indexes (NDVI, GVI, SAVI and RVI) based on the same satellite. All these data were analyzed using linear and nonlinear regression methods to generate estimation models of biophysical parameters. The use of regression models based on nonlinear equations was more appropriate to estimate parameters such as the LAI and the percentage of biomass, important to indicate the productivity of coffee crop.

Fisionomia e organização da vegetação do carrasco no planalto da Ibiapaba, estado do Ceará

Is the carrasco on the Ibiapaba plateau a unique plant formation? To answer this question the vertical height (except of climbers) and the stem basal diameter (from 3cm on) of woody plants were measured, and soil extracts (0-50 and 50-100cm depth) were taken from 100 random plots (10x10m) at Jaburuna (3º54'34S and 40º59'24W, altitudes near 830m), municipality of Ubajara, Ceará State. Data on climate, soil, diameter height, density, basal area, and physiognomy were compared with those surveyed by other researchers from the carrasco, caatinga, and cerrado in Northeastern Brazil. The carrasco occurs under an annual rainfall of between 668 and 1,289mm and temperatures from 22 to 24ºC, on alic Quartz Sand soils, at altitudes between 700 and 900m: it has a larger density and a smaller basal area than the caatinga and the cerrado, small and similar diameters, and an average vertical height between 3,7 and 5,4m. It differs from the caatinga, cerrado (and cerradão) and secondary forest in many items of lhe ecotope, organization and physiognomy, thus being a unique plain formation, which can be characterized as a deciduous, high, closed, and unistratified shrubland intermingled by lianas, with an irregular canopy and sparse, emergent trees.

Malpighiaceae: correlations between habit, fruit type and basic chromosome number

The family Malpighiaceae presents species with different habits, fruit types and cytological characters. Climbers are considered the most derived habit, followed, respectively, by the shrubby and arboreal ones. The present study examines the relationship between basic chromosome numbers and the derivation of climbing habit and fruit types in Malpighiaceae. A comparison of all the chromosome number reports for Malpighiaceae showed a predominance of chromosome numbers based on x=5 or 10 in the genera of sub-family Malpighioideae, mainly represented by climbers with winged fruits, whereas non-climbing species with non-winged fruits, which predominate in sub-family Byrsonimoideae, had counts based on x=6, which is considered the less derived basic number for the family. Based on such data, confirmed by statistic assays, and on the monophyletic origin of this family, we admit the hypothesis that morphological derivation of habit and fruit is correlated with chromosome basic number variation in the family Malpighiaceae.

Aspectos ultra-estruturais dos canais secretores em órgãos vegetativos e reprodutivos de Anacardiaceae

The study assessed phloem canal development and ultra-structure in shoot apices of Spondias dulcis G. Forst., phloematic canal ultra-structure in shoot apices of Tapirira guianensis Aubl., and floral canal ultra-structure and development and fruit canal ultra-structure of the latter specie. The flower and fruit canals of Anacardium humile St.Hil. were also studied ultra-structurally. The canals in shoot apices of S. dulcis show schizo-lysigenous formation and the floral canals of T. guianensis show schizogenous development. Epithelial cells of S. dulcis and T. guianensis canals have rough endoplasmic reticulum, free ribosomes, elongated plastids of several shapes with osmiophilic inclusions and dictyosomes with production of vesicles. Such organelles participate in the secretion of a heterogeneous exudate, which is comprised of hydrophilic and lipophilic substances. The epithelial cells of the fruit of A. humile present elongated plastids with circular membrane system, which are involved in the synthesis of lipophilic substances. The results of the ultra-structural analyses of the epithelial cells corroborate the results previously obtained in a histochemical study. In the histochemical study, lipophilic and hydrophilic substances were identified in the canals of T. guinanensis and S. dulcis and only lipophilic substances were identified in the canals of A. humile. Based on the ultrastructural aspects of the secretory canals of T. guianensis and S. dulcis we concluded that the plastids of the epithelial cells of the two species are different although they produce secretion of similar composition. A new record for the family is the presence of a great number of circular plastids in epithelial cells of the fruit of Anacardium humile. The pattern found in the secretory canals of the studied species is the ecrine type of secretion release.

Ontogenia e estrutura do pericarpo de Prestonia riedelii (Müll. Arg.) Markgr. (Apocynaceae)

The aim of this work was to describe the morphology and ontogeny of P. riedelii fruits to aid in taxonomic, ecological and phylogenetic studies in Apocynaceae. Fruits were fixed in FAA, embedded in plastic resin, sectioned at 10 ìm and stained with toluidine blue, for structural analysis. The fruit of P. riedelii is a follicarium, with two follicular fruitlets. The epicarp is one-cell-layered, with trichomes and thick cuticle. The mesocarp, originating from fundamental ovary tissue, is parenchymatous with laticifers, non-lignified fibers and vascular bundles. The endocarp sensu lato is two-celllayered of crossed sclereids, originating from the inner ovary epidermis and from a single layer of parenchyma cells of fundamental ovary tissue. Follicle dehiscence is lateral and the dehiscence process involves anatomical characteristics such as a dehiscence zone with thin-walled cells, non-lignified fibers in the mesocarp and crossed sclereids in the endocarp.

Seed dispersal of Solanum thomasiifolium Sendtner (Solanaceae) in the Linhares Forest, Espírito Santo state, Brazil

The aim of this study was to analyse seed dispersal and establishment of Solanum thomasiifolium in an area of nativo vegetation in Espirito Santo state on the southeastern Brazilian coast. Ten species of birds, the crab-eating fox (Cerdocyon thous), and one species of lizard (Tropidurus torquatus) fed on S. thomasiifolium fruits and dispersed viable seeds in their faeces. The proportional contribution of each of these groups to seed dispersal was 77% (birds), 19% (crab-eating fox) and 4% (lizards). Ants also contributed to seed dispersal. More seeds were deposited in vegetation islands than in the surrounding open areas. Germination rates of seeds collected directly from fruit (control), bird droppings, the faeces of crab-eating foxes and lizards were, respectively, 64, 64, 53, and 80 %. Differences among these rates were all significant, except between birds and control. Lizards were important as seed carriers between nearby islands and they expelled a higher proportion of viable seeds. Birds and the crab-eating foxes did not enhance seed germination, but promoted seed dispersal over a wider area. Plant architecture, fruit productivity, fruit characteristics and the diversity of frugivores are important for the success of S. thomasiifolium in habitat colonization.