Achieving transparency in carbon labelling for construction materials – Lessons from current assessment standards and carbon labels

The construction industry is one of the largest sources of carbon emissions. Manufacturing of raw materials, such as cement, steel and aluminium, is energy intensive and has considerable impact on carbon emissions level. Due to the rising recognition of global climate change, the industry is under pressure to reduce carbon emissions. Carbon labelling schemes are therefore developed as meaningful yardsticks to measure and compare carbon emissions. Carbon labelling schemes can help switch consumer-purchasing habits to low-carbon alternatives. However, such switch is dependent on a transparent scheme. The principle of transparency is highlighted in all international greenhouse gas (GHG) standards, including the newly published ISO 14067: Carbon footprint of products – requirements and guidelines for quantification and communication. However, there are few studies which systematically investigate the transparency requirements in carbon labelling schemes. A comparison of five established carbon labelling schemes, namely the Singapore Green Labelling Scheme, the CarbonFree (the U.S.), the CO2 Measured Label and the Reducing CO2 Label (UK), the CarbonCounted (Canada), and the Hong Kong Carbon Labelling Scheme is therefore conducted to identify and investigate the transparency requirements. The results suggest that the design of current carbon labels have transparency issues relating but not limited to the use of a single sign to represent the comprehensiveness of the carbon footprint. These transparency issues are partially caused by the flexibility given to select system boundary in the life cycle assessment (LCA) methodology to measure GHG emissions. The primary contribution of this study to the construction industry is to reveal the transparency requirements from international GHG standards and carbon labels for construction products. The findings also offer five key strategies as practical implications for the global community to improve the performance of current carbon labelling schemes on transparency.

Current trends and challenges for sport and exercise psychology – What now for our discipline?

With an ever changing landscape including National Registration, endorsed areas of practice, establishment of Sport and Exercise Psychology coordinators within National Sporting Organisations, changes to the National and State Sporting Insitutions, this forum looks to explore through collegiate discussion the impacts, current and future implications for our profession across training, supervision, research and applied practice in Australia.

Comparison of eight published static finite element models of the intact lumbar spine : predictive power of models improves when combined together

Finite element (FE) model studies have made important contributions to our understanding of functional biomechanics of the lumbar spine. However, if a model is used to answer clinical and biomechanical questions over a certain population, their inherently large inter-subject variability has to be considered. Current FE model studies, however, generally account only for a single distinct spinal geometry with one set of material properties. This raises questions concerning their predictive power, their range of results and on their agreement with in vitro and in vivo values. Eight well-established FE models of the lumbar spine (L1-5) of different research centres around the globe were subjected to pure and combined loading modes and compared to in vitro and in vivo measurements for intervertebral rotations, disc pressures and facet joint forces. Under pure moment loading, the predicted L1-5 rotations of almost all models fell within the reported in vitro ranges, and their median values differed on average by only 2° for flexion-extension, 1° for lateral bending and 5° for axial rotation. Predicted median facet joint forces and disc pressures were also in good agreement with published median in vitro values. However, the ranges of predictions were larger and exceeded those reported in vitro, especially for the facet joint forces. For all combined loading modes, except for flexion, predicted median segmental intervertebral rotations and disc pressures were in good agreement with measured in vivo values. In light of high inter-subject variability, the generalization of results of a single model to a population remains a concern. This study demonstrated that the pooled median of individual model results, similar to a probabilistic approach, can be used as an improved predictive tool in order to estimate the response of the lumbar spine.

Public policy on corporate audit committees : case study evidence of current practice

Corporate failures and malpractices have led to an increasing emphasis on the governance role of audit committees. The Smith report Audit Committee Combined Code Guidance and the Higgs Review of the Role and Effectiveness of Non-Executive Directors (now incorporated in a Revised Combined Code) represent further attempts to strengthen corporate accountability in the UK. Although the regulatory focus on audit committees indicates confidence in their role as part of the solution to governance failures, questions remain about their efficacy in practice. Against the background of the publication of the Smith report and the wider reliance on audit committees in several countries to help improve corporate accountability, this paper provides research evidence, drawn from an ACCA-sponsored project, on the processes and effects of the audit committees in three UK companies. This study complements other research on audit committees by adopting a case study approach, in order to reflect the importance of investigating audit committee operations from within the organisation and to develop a closer understanding of audit committee impact than is available from generally observable data. The empirical evidence for the case studies was obtained from semi-structured interviews with personnel involved in the audit committee process, internal documents made available by the companies, and publicly available information, including annual reports.

“My hands are plunged in oranges”…: an experiential account of a working process

This presentation incorporated the live performance throughout, by the author, of movement from “The All Weather Project” by Liz Roche. Movement sections are indicated by italics. “I am going to start by dancing for you… Movement: Live performance of solo approximately 10 minutes in duration This is the introduction... Through my PhD research, I am examining the choreographic process from the perspective of the independent contemporary dancer, through embodying this role as a researcher/participant. My methodological frameworks, which utilise video documentation and journal writing, could be characterised as ethnographic, multi-modal embodied theorising, leading to “multi-dimensional theorising” (I adopt this term from Susan Melrose). In this way, I am unwinding the embodied practice of dancing, through the co-existent layers of experience, towards forming a theoretical understanding of the issues that arise for the dancer. The issues that I have identified as relevant to my research are those relating to the dancer’s ‘moving identity’ or way of moving, as a mutable and adaptable form that must alter and re-adjust to each different choreographic engram or movement vocabulary, that she/he encounters. I am examining this interplay between stability and change. I also reflect on the impact of destabilisation and flux on the dancer’s identity in a wider sense, as she/he relates outwardly to signifying factors within the social strata. Today I am going to bring you through a reflection on the working process of a dance piece as experienced from the inside. By doing so, I hope to capture and elucidate the multi-dimensional layers which existed for me within this process. Through displaying these fragments together, I endeavour to invoke the ‘totality’ of the experience...

Mismatch negativity in recent-onset and chronic schizophrenia : a current source density analysis

Mismatch negativity (MMN) is a component of the event-related potential elicited by deviant auditory stimuli. It is presumed to index pre-attentive monitoring of changes in the auditory environment. MMN amplitude is smaller in groups of individuals with schizophrenia compared to healthy controls. We compared duration-deviant MMN in 16 recent-onset and 19 chronic schizophrenia patients versus age- and sex-matched controls. Reduced frontal MMN was found in both patient groups, involved reduced hemispheric asymmetry, and was correlated with Global Assessment of Functioning (GAF) and negative symptom ratings. A cortically-constrained LORETA analysis, incorporating anatomical data from each individual's MRI, was performed to generate a current source density model of the MMN response over time. This model suggested MMN generation within a temporal, parietal and frontal network, which was right hemisphere dominant only in controls. An exploratory analysis revealed reduced CSD in patients in superior and middle temporal cortex, inferior and superior parietal cortex, precuneus, anterior cingulate, and superior and middle frontal cortex. A region of interest (ROI) analysis was performed. For the early phase of the MMN, patients had reduced bilateral temporal and parietal response and no lateralisation in frontal ROIs. For late MMN, patients had reduced bilateral parietal response and no lateralisation in temporal ROIs. In patients, correlations revealed a link between GAF and the MMN response in parietal cortex. In controls, the frontal response onset was 17 ms later than the temporal and parietal response. In patients, onset latency of the MMN response was delayed in secondary, but not primary, auditory cortex. However amplitude reductions were observed in both primary and secondary auditory cortex. These latency delays may indicate relatively intact information processing upstream of the primary auditory cortex, but impaired primary auditory cortex or cortico-cortical or thalamo-cortical communication with higher auditory cortices as a core deficit in schizophrenia.

NADPH oxidases as regulators of tumor angiogenesis : current and emerging concepts

Significance Reactive oxygen species (ROS) such as superoxide, hydrogen peroxide, and peroxynitrite are generated ubiquitously by all mammalian cells and have been understood for many decades as inflicting cell damage and as causing cancer by oxidation and nitration of macromolecules, including DNA, RNA, proteins, and lipids. Recent Advances A current concept suggests that ROS can also promote cell signaling pathways triggered by growth factors and transcription factors that ultimately regulate cell proliferation, differentiation, and apoptosis, all of which are important hallmarks of tumor cell proliferation and angiogenesis. Moreover, an emerging concept indicates that ROS regulate the functions of immune cells that infiltrate the tumor environment and stimulate angiogenesis, such as macrophages and specific regulatory T cells. Critical Issues In this article, we highlight that the NADPH oxidase family of ROS-generating enzymes are the key sources of ROS and, thus, play an important role in redox signaling within tumor, endothelial, and immune cells thereby promoting tumor angiogenesis. Future Directions Knowledge of these intricate ROS signaling pathways and identification of the culprit NADPH oxidases is likely to reveal novel therapeutic opportunities to prevent angiogenesis that occurs during cancer and which is responsible for the revascularization after current antiangiogenic treatment.

Did Brisbane grow smartly? Drivers of city growth 1991-2001 and lessons for current policies

Urban areas are growing unsustainably around the world; however, the growth patterns and their associated drivers vary between contexts. As a result, research has highlighted the need to adopt case study based approaches to stimulate the development of new theoretic understandings. Using land-cover data sets derived from Landsat images (30 m × 30 m), this research identifies both patterns and drivers of urban growth in a period (1991-2001) when a number of policy acts were enacted aimed at fostering smart growth in Brisbane, Australia. A linear multiple regression model was estimated using the proportion of lands that were converted from non-built-up (1991) to built-up usage (2001) within a suburb as a dependent variable to identify significant drivers of land-cover changes. In addition, the hot spot analysis was conducted to identify spatial biases of land-cover changes, if any. Results show that the built-up areas increased by 1.34% every year. About 19.56% of the non-built-up lands in 1991 were converted into built-up lands in 2001. This conversion pattern was significantly biased in the northernmost and southernmost suburbs in the city. This is due to the fact that, as evident from the regression analysis, these suburbs experienced a higher rate of population growth, and had the availability of habitable green field sites in relatively flat lands. The above findings suggest that the policy interventions undertaken between the periods were not as effective in promoting sustainable changes in the environment as they were aimed for.

Addressing factory needs in cane variety selection

Cane fibre content has increased over the past ten years. Some of that increase can be attributed to new varieties selected for release. This paper reviews the existing methods for quantifying the fibre characteristics of a variety, including fibre content and fibre quality measurements – shear strength, impact resistance and short fibre content. The variety selection process is presented and it is reported that fibre content has zero weighting in the current selection index. An updated variety selection approach is proposed, potentially replacing the existing selection process relating to fibre. This alternative approach involves the use of a more complex mill area level model that accounts for harvesting, transport and processing equipment, taking into account capacity, efficiency and operational impacts, along with the end use for the bagasse. The approach will ultimately determine a net economic value for the variety. The methodology lends itself to a determination of the fibre properties that have a significant impact on the economic value so that variety tests can better target the critical properties. A low-pressure compression test is proposed as a good test to provide an assessment of the impact of a variety on milling capacity. NIR methodology is proposed as a technology to lead to a more rapid assessment of fibre properties, and hence the opportunity to more comprehensively test for fibre impacts at an earlier stage of variety development.

Diagnostic potential of saliva : current state and future applications

BACKGROUND: Over the past 10 years, the use of saliva as a diagnostic fluid has gained attention and has become a translational research success story. Some of the current nanotechnologies have been demonstrated to have the analytical sensitivity required for the use of saliva as a diagnostic medium to detect and predict disease progression. However, these technologies have not yet been integrated into current clinical practice and work flow. CONTENT: As a diagnostic fluid, saliva offers advantages over serum because it can be collected noninvasively by individuals with modest training, and it offers a cost-effective approach for the screening of large populations. Gland-specific saliva can also be used for diagnosis of pathology specific to one of the major salivary glands. There is minimal risk of contracting infections during saliva collection, and saliva can be used in clinically challenging situations, such as obtaining samples from children or handicapped or anxious patients, in whom blood sampling could be a difficult act to perform. In this review we highlight the production of and secretion of saliva, the salivary proteome, transportation of biomolecules from blood capillaries to salivary glands, and the diagnostic potential of saliva for use in detection of cardiovascular disease and oral and breast cancers. We also highlight the barriers to application of saliva testing and its advancement in clinical settings. SUMMARY: Saliva has the potential to become a first-line diagnostic sample of choice owing to the advancements in detection technologies coupled with combinations of biomolecules with clinical relevance. (C) 2011 American Association for Clinical Chemistry

Understanding public response to a congestion charge : a random-effects ordered logit approach

Public acceptance is consistently listed as having an enormous impact on the implementation and success of a congestion charge scheme. This paper investigates public acceptance of such a scheme in Australia. Surveys were conducted in Brisbane and Melbourne, the two fastest growing Australian cities. Using an ordered logit modeling approach, the survey data including stated preferences were analyzed to pinpoint the important factors influencing people’s attitudes to a congestion charge and, in turn, to their transport mode choices. To accommodate the nature of, and to account for the resulting heterogeneity of the panel data, random effects were considered in the models. As expected, this study found that the amount of the congestion charge and the financial benefits of implementing it have a significant influence on respondents’ support for the charge and on the likelihood of their taking a bus to city areas. However, respondents’ current primary transport mode for travelling to the city areas has a more pronounced impact. Meanwhile, respondents’ perceptions of the congestion charge’s role in protecting the environment by reducing vehicle emissions, and of the extent to which the charge would mean that they travelled less frequently to the city for shopping or entertainment, also have a significant impact on their level of support for its implementation. We also found and explained notable differences across two cities. Finally, findings from this study have been fully discussed in relation to the literature.