Distribuição volumétrica e diâmetro de gotas de pontas de pulverização de energia hidráulica para controle de corda-de-viola

As pontas de pulverização são responsáveis pela formação das gotas, e cada ponta apresenta características próprias relacionadas ao espectro de gotas e perfil de deposição, específicas para determinados alvos. Este trabalho teve o objetivo de caracterizar o diâmetro e a uniformidade das gotas e o perfil de distribuição volumétrica das pontas de pulverização AI 110015 e TTI 110015, bem como seu efeito sobre a mortalidade de corda-de-viola, com herbicida pré-emergente, associado ou não a adjuvantes. Avaliou-se o número de plantas emergidas e os pesos secos da parte aérea e radicular das plantas. Os perfis de distribuição volumétrica para a altura de 40 cm foram avaliados em mesa de deposição. A partir dos perfis de distribuição, simulou-se o padrão de deposição ao longo da barra de pulverização. O espectro do diâmetro de gotas foi determinado em analisador de tamanho de partículas por difração de luz laser . O herbicida diuron + hexazinona foi eficiente no controle em préemergência de corda-de-viola, podendo ser utilizado polimetil siloxano organomodificado ou óleo mineral como adjuvantes, associados às pontas de pulverização AI 110015 ou TTI 110015. O uso de adjuvantes proporcionou aumento no diâmetro mediano volumétrico e redução na porcentagem de gotas com diâmetro inferior a 100 µm. O espaçamento sugerido entre os bicos na barra de pulverização foi de 70 cm para o modelo AI 110015 e 80 cm para o modelo TTI 110015.

Parasitismo de Erythmelus tingitiphagus (Soares) (Hymenoptera: Mymaridae) em ovos de Leptopharsa heveae Drake & Poor (Hemiptera: Tingidae), em plantios de seringueira (Hevea brasiliensis Müell. Arg.)

The rubber tree lace bug, Leptopharsa heveae Drake & Poor occurs in high populations in rubber tree plantations and it is a limiting factor in rubber production due to the loss of photosynthetic tissue. The control of the pest has been made mainly with chemical products, which cause environmental contamination. The alternative would be the use of biological control agents, however, information about L. heveae natural enemies are scarce. The parasitoid Erythmelus tingitiphagus (Soares) parasitize eggs of the rubber tree lace bug. The aim of this study was to verify the occurrence of E. tingitiphagus in plantations of several rubber tree clones, located in Itiquira town, Mato Grosso State. The plant leaflets of the clones RRIM 600, PR 255, GT 1, PB 235 and PB 217 were collected weekly from October 2005 to February 2006. Parasitism was recorded during the entire study period. The parasitism rate of L. heveae eggs in the different clones ranged from 16.8 to 20.6%.

Diferentes diâmetros de gotas e equipamentos para aplicação de inseticida no controle de Pseudoplusia includens

It was aimed to evaluate the spectrum and uniformity of droplets in function of sprayers, spraying volumes and rates of chemical insecticide on the mortality of Pseudoplusia includens in laboratory. The work was carried out at UNESP, Jaboticabal, SP, Brazil. The following treatments were applied over the caterpillars: two equipments (atomizer and hydraulic nozzle); two spray volumes (17 and 50 L ha(-1) for the atomizer and 50 and 100 L ha(-1) for the hydraulic nozzle); and two dosages of the insecticide endosulfan (0.5 and 1.0 L pc ha(-1)), in fully randomized plots, in a factorial scheme 2x2x2 and 1 untreated check. The caterpillars mortality was evaluated until the 6(th) day after the application of treatments. The spectrum of the droplets was evaluated in a particle size analyzer in real time determining the diameter and spectrum of droplets sprayed through the laser beam of the analyser. It was verified that the spray volume can be reduced by 17 L ha(-1) without losses on the P. includens control. The doses of 0.5 L pc ha(-1) (recommended for Anticarsia gemmatalis) did not satisfactorily control the caterpillar soybean looper. The atomizer produces droplets of higher uniformity (SPAN: 0.52) and lower percentage of droplets susceptible to drift (3.3%) compared to hydraulic nozzle (SPAN: 1.34 e % droplets <= 100 mu m: 15.2).

Divergência genética de cultivares de arroz quanto à resistência a Tibraca limbativentris Stål (Hemiptera: Pentatomidae)

A divergência genética de 16 cultivares de arroz quanto à resistência ao percevejo-do-colmo-do-arroz, Tibraca limbativentris Stål, foi avaliada por meio de técnicas de análise multivariada. O experimento foi conduzido em casa de vegetação, em delineamento experimental de blocos ao acaso, com oito repetições. Na avaliação foram considerados oito caracteres de resistência ao ataque do inseto. A divergência genética foi avaliada por procedimentos multivariados: distância generalizada de Mahalanobis (D²), método de agrupamento de otimização de Tocher e técnica de variáveis canônicas. As cultivares mais dissimilares foram Bico Ganga e Marabá Branco, enquanto Agulha e Branco Tardão foram as mais similares. Foram formados cinco grupos pelo método de otimização de Tocher. As três primeiras variáveis canônicas explicaram 88,5% da variabilidade total disponível. Conclui-se que as técnicas de análise multivariada são eficientes para a análise da divergência genética entre as cultivares de arroz, com destaque para Marabá Branco e Bico Ganga, consideradas as mais promissoras a serem utilizadas em futuros cruzamentos para melhoramento visando resistência ao percevejo-do-colmo-do-arroz.

Uso de graus-dia para a previsão de ocorrência de ninfas e adultos de Piezodorus guildinii (West.) (Heteroptera: Pentatomidae) em soja

O presente estudo foi desenvolvido na FCAV-UNESP, em Jaboticabal, SP, durante as safras agrícolas de 1995/96 e 1996/97, visando à previsão de ocorrência de ninfas e adultos de Piezodorus guildinii (West.), por meio de um modelo de graus-dia. As datas em que as primeiras posturas e os primeiros adultos do percevejo foram encontrados na soja foram usadas para dar início à soma acumulada de graus-dia. A previsão de ocorrência foi mais precisa para picos populacionais de adultos do que para diferentes ínstares de P. guildinii.

Avaliação morfométrica da área do epidídimo e dos dúctulos eferentes e ductos epididimários da codorna doméstica, no decorrer do ano

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Efficacy evaluation of a commercial neem cake for control of Haematobia irritans on Nelore cattle

Muita atenção tem sido dada ao desenvolvimento de inseticidas vegetais buscando-se um efetivo controle de ectoparasitas de bovinos, sem prejudicar animais, consumidores e meio ambiente. Este estudo, realizado de abril a julho de 2008, na Empresa Brasileira de Pesquisa Agropecuária (EMBRAPA) Pecuária Sudeste, em São Carlos, SP, Brasil, avaliou a eficácia de uma torta comercial de nim (Azadirachta indica) no controle da mosca-dos-chifres (Haematobia irritans) em bovinos. A torta de nim, misturada ao sal mineral na concentração de 2%, foi fornecida a 20 vacas Nelore, durante nove semanas, e sua eficácia foi monitorada através de contagens semanais nos grupos tratado e controle. Infestações individuais foram registradas por meio de fotos digitais em todos os animais de ambos os grupos, e o número de moscas foi, posteriormente, quantificado com o auxílio de um sistema de análise de imagem computadorizado. A quantificação dos componentes da torta de nim, por cromatografia líquida, revelou a presença de azadiractina (421 mg.kg-1) e 3-tigloyl-azadirachtol (151 mg.kg-1). A adição da torta de nim a 2% reduziu o consumo de sal mineral em cerca de 22%. O tratamento com torta de nim a 2% não reduziu as infestações por mosca-dos-chifres em bovinos durante as nove semanas do estudo.

Novas configurações de monopólios planares quase-fractais para sistemas de comunicações móveis

The characteristic properties of the fractal geometry have shown to be very useful for the construction of filters, frequency selective surfaces, synchronized circuits and antennas, enabling optimized solutions in many different commercial uses at microwaves frequency band. The fractal geometry is included in the technology of the microwave communication systems due to some interesting properties to the fabrication of compact devices, with higher performance in terms of bandwidth, as well as multiband behavior. This work describes the design, fabrication and measurement procedures for the Koch quasi-fractal monopoles, with 1 and 2 iteration levels, in order to investigate the bandwidth behavior of planar antennas, from the use of quasi-fractal elements printed on their rectangular patches. The electromagnetic effect produced by the variation of the fractal iterations and the miniaturization of the structures is analyzed. Moreover, a parametric study is performed to verify the bandwidth behavior, not only at the return loss but also in terms of SWR. Experimental results were obtained through the accomplishment of measurements with the aid of a vetorial network analyzer and compared to simulations performed using the Ansoft HFSS software. Finally, some proposals for future works are presented

Antenas de microfita com patch quase-fractal para aplicações em Redes WPAN/WLAN

The microstrip antennas are in constant evidence in current researches due to several advantages that it presents. Fractal geometry coupled with good performance and convenience of the planar structures are an excellent combination for design and analysis of structures with ever smaller features and multi-resonant and broadband. This geometry has been applied in such patch microstrip antennas to reduce its size and highlight its multi-band behavior. Compared with the conventional microstrip antennas, the quasifractal patch antennas have lower frequencies of resonance, enabling the manufacture of more compact antennas. The aim of this work is the design of quasi-fractal patch antennas through the use of Koch and Minkowski fractal curves applied to radiating and nonradiating antenna s edges of conventional rectangular patch fed by microstrip inset-fed line, initially designed for the frequency of 2.45 GHz. The inset-fed technique is investigated for the impedance matching of fractal antennas, which are fed through lines of microstrip. The efficiency of this technique is investigated experimentally and compared with simulations carried out by commercial software Ansoft Designer used for precise analysis of the electromagnetic behavior of antennas by the method of moments and the neural model proposed. In this dissertation a study of literature on theory of microstrip antennas is done, the same study is performed on the fractal geometry, giving more emphasis to its various forms, techniques for generation of fractals and its applicability. This work also presents a study on artificial neural networks, showing the types/architecture of networks used and their characteristics as well as the training algorithms that were used for their implementation. The equations of settings of the parameters for networks used in this study were derived from the gradient method. It will also be carried out research with emphasis on miniaturization of the proposed new structures, showing how an antenna designed with contours fractals is capable of a miniaturized antenna conventional rectangular patch. The study also consists of a modeling through artificial neural networks of the various parameters of the electromagnetic near-fractal antennas. The presented results demonstrate the excellent capacity of modeling techniques for neural microstrip antennas and all algorithms used in this work in achieving the proposed models were implemented in commercial software simulation of Matlab 7. In order to validate the results, several prototypes of antennas were built, measured on a vector network analyzer and simulated in software for comparison

Arranjos Log-Periódicos Compactos em Microfita com Elementos Fractais de Koch

This work aims to present how the application of fractal geometry to the elements of a log-periodic array can become a good alternative when one wants to reduce the size of the array. Two types of log-periodic arrays were proposed: one with fed by microstrip line and other fed by electromagnetic coupling. To the elements of these arrays were applied fractal Koch contours, at two levels. In order to validate the results obtained some prototypes were built, which were measured on a vector network analyzer and simulated in a software, for comparison. The results presented reductions of 60% in the total area of the arrays, for both types. By analyzing the graphs of return loss, it was observed that the application of fractal contours made different resonant frequencies appear in the arrays. Furthermore, a good agreement was observed between simulated and measured results. The array with feeding by electromagnetic coupling presented, after application of fractal contours, radiation pattern with more smooth forms than the array with feeding by microstrip line

Antenas planares integradas com FSSs para aplicações em sistemas de comunicações sem fio

This work presents a theoretical and experimental analysis about the properties of microstrip antennas with integrated frequency selective surfaces (Frequency Selective Surface - FSS). The integration occurs through the insertion of the FSS on ground plane of microstrip patch antenna. This integration aims to improve some characteristics of the antennas. The FSS using patch-type elements in square unit cells. Specifically, the simulated results are obtained using the commercial computer program CST Studio Suite® version 2011. From a standard antenna, designed to operate in wireless communication systems of IEEE 802.11 a / b / g / n the dimensions of the FSS are varied to obtain an optimization of some antenna parameters such as impedance matching and selectivity in the operating bands. After optimization of the investigated parameters are built two prototypes of microstrip patch antennas with and without the FSS ground plane. Comparisons are made of the results with the experimental results by 14 ZVB network analyzer from Rohde & Schwarz ®. The comparison aims to validate the simulations performed and show the improvements obtained with the FSS in integrated ground plane antenna. In the construction of prototypes, we used dielectric substrates of the type of Rogers Corporation RT-3060 with relative permittivity equal to 10.2 and low loss tangent. Suggestions for continued work are presented

Caracterização de superfícies seletivas de freqüência e de antenas fractais para aplicações em redes sem fio

This work aims to investigate the behavior of fractal elements in planar microstrip structures. In particular, microstrip antennas and frequency selective surfaces (FSSs) had changed its conventional elements to fractal shapes. For microstrip antennas, was used as the radiating element of Minkowski fractal. The feeding method used was microstrip line. Some prototypes were built and the analysis revealed the possibility of miniaturization of structures, besides the multiband behavior, provided by the fractal element. In particular, the Minkowski fractal antenna level 3 was used to exploit the multiband feature, enabling simultaneous operation of two commercial tracks (Wi-Fi and WiMAX) regulated by ANATEL. After, we investigated the effect of switches that have been placed on the at the pre-fractal edges of radiating element. For the FSSs, the fractal used to elements of FSSs was Dürer s pentagon. Some prototypes were built and measured. The results showed a multiband behavior of the structure provided by fractal geometry. Then, a parametric analysis allowed the analysis of the variation of periodicity on the electromagnetic behavior of FSS, and its bandwidth and quality factor. For numerical and experimental characterization of the structures discussed was used, respectively, the commercial software Ansoft DesignerTM and a vector network analyzer, Agilent N5230A model

Efecto Insecticida del Extracto de Semillas de Neem (Azadirachta indica A. Juss) sobre Collaria scenica Stal (Hemiptera: Miridae)

This work was developed with the objetive to evaluate the insecticidal effect of the Neem (Azadirachta indica A. Juss) seeds against grass bug nymphs Collaria scenica Stal. For that, an extract was prepared from green fruits of Neem by rotaevaporacion. The extract was diluted in three ppm concentrations corresponding to treatments. Using thin-layer chromatography we identified the presence of Azaridactina. DCA essay was carried out with 4 treatments and 5 repetitions that included the three extract concentrations and a control. In each repetition were used 15 nymphs, randomly placed in plastic boxes with food and the corresponding concentration. Every day an extract application was made and recorded mortality percentage, number of exuviae and number of individuals who came to adulthood in each treatment. The results were analyzed using Kruskal-Wallis and Games-Howell for each variable. The three concentrations of Neem seed extract had a negative effect on the development of the bugs. The more concentrated treatment (250 ppm) was the most effective, showing a 97% mortality, fewer exuvias and and fewer adults in the end of the experiment.

Técnica de medição de área foliarconsumida por insetos através de digitalizador de imagens

Este trabalho teve por objetivo verificar a viabilidade do uso de digitalizador de imagens manual, acoplado a um microcomputador, para a avaliação do consumo de folhas de soja, por lagartas de 5o instar de Anticarsia gemmatalis Hübner (Lep.: Noctuidae), em comparação com o método de pesagem e do planímetro, baseando-se na eficiência dos métodos e no tempo gasto para a avaliação. Os testes foram realizados utilizando-se folhas de soja `IAC 8' e lagartas criadas em dieta artificial. Foram realizados 2 tipos de teste: 1o) oferecimento de folíolos inteiros de soja às lagartas e, 2o) oferecimento de disco de folhas de área conhecida. No 1o teste comparou-se o método de pesagem com o digitalizador de imagens (scanner); no 2o experimento foram comparados o método do planímetro com o digitalizador de imagens que emprega o programa PCXAREA. Os resultados obtidos demonstraram que não existem diferenças nas medições de folíolos e discos de soja consumidos por A. gemmatalis quando comparados os métodos tradicionais (planímetro e pesagem) e o de digitalização de imagens. A medição com o digitalizador reduziu o tempo de avaliação em 88,5% e 87%, em relação ao planímetro e método de pesagem, respectivamente, sendo plenamente viável a sua utilização.

Biology of Thaumastocoris peregrinus in different eucalyptus species and hybrids

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)