Spéciation of chromium in a chromium enriched yeast.

The sample under investigation in this project is an experimental chromium enriched yeast used as a possible additive in animal foodstuff, which was produced by growing yeast in the presence of chromium (III) chloride. Chromium on its own in not biologically active but chromium in the form of chromium enriched yeast is biologically active. The objective of this project was to show the complete absence of chromium(VI) from the sample. A literature survey describing previous work carried out on the speciation of Cr(VI) has been carried out. The principal methods of detection of Cr(VI) used in this project are Polarography, G.F.A.A. Spectroscopy, U.V. Spectroscopy and H.P.L.C. For each of the above methods a calibration curve was obtained and each method was applied to the yeast extract. The H.P.L.C. and U.V. spectroscopic method are specific for Cr(VI) but polarography and G.F.A.A. spectroscopy measure total chromium. Tris-NaOH buffer has been investigated for the extraction of chromium(VT). Problems associated with air oxidation of Cr(III) in alkaline solution have identified and procedures described for the suppression of air oxidation. Procedures are described for the application of the extraction procedure to the yeast extract and for the determination of Cr(VI) in the extract. Procedures are also described for the preconcentration of Cr(VI) on a HPLC column and for the application to the yeast extract. The rate of reduction of Cr(VI) by ascorbic acid is investigated and found to be first order with respect to ascorbic acid concentration. The reduction capacity of the yeast is also investigated and it was found that in acid solution the yeast will reduce Cr(VI) but in neutral or basic solution the reduction capacity is diminished. Conclusions regarding the objectives of the project are drawn and suggestions for further work are given.

Development of an integrated approach to reliability management and operation

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-component Products (REFIDAM) Project. This project was founded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and Thermo King Europe. The project aimed to develop a system in order to manage the information required for reliability assessment and improvement of multi-component products, by establishing information flows within the company and information exchange with fleet users.

Development of a life cycle management system for remote products.

The research described in this thesis has been developed as a part of the Reliability and Field Data Management for Multi-Component Products (REFIDAM) Project. This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway-Mayo Institute of Technology and an industrial company, Thermo King Europe. The project aimed to develop a system to manage the information required for maintenance costing, cost of ownership, reliability assessment and improvement of multi-component products, by establishing information flows between the customer network and across the Thermo King organisation.

Implementation of a customer relationship management system in an SME

The research conducted for this thesis has been carried out over a two year period as part of the Mobile Tools and Technology for customer care (MOTTO) project. The project was funded under the Applied Grant scheme administered by Enterprise Ireland and Nortel Networks Ltd. It was a partnership project between Galway-Mayo Institute of Technology, University of Limerick, National University of Ireland Galway, and a global Internet and communications company, Nortel Networks. The project aimed to investigate the enabling mobile communications technologies in e-Business and mobile communications in the area of Business-to-Business (B2B) customer care. The development of the application discussed in this thesis was developed in conjunction with the Galway-Mayo Institute of Technology, University of Limerick and AMT Ireland. The decision to develop the application in the Electronics Company of AMT in Limerick came about as a result of the contact established by Mark Southern from the University of Limerick. Mark was involved in overseeing the development and assisted in establishing the user requirements.

Development of a semi-automatic self learning pattern recognition system for the control of electronic boards

This project was funded under the Applied Research Grants Scheme administered by Enterprise Ireland. The project was a partnership between Galway - Mayo Institute of Technology and an industrial company, Tyco/Mallinckrodt Galway. The project aimed to develop a semi - automatic, self - learning pattern recognition system capable of detecting defects on the printed circuits boards such as component vacancy, component misalignment, component orientation, component error, and component weld. The research was conducted in three directions: image acquisition, image filtering/recognition and software development. Image acquisition studied the process of forming and digitizing images and some fundamental aspects regarding the human visual perception. The importance of choosing the right camera and illumination system for a certain type of problem has been highlighted. Probably the most important step towards image recognition is image filtering, The filters are used to correct and enhance images in order to prepare them for recognition. Convolution, histogram equalisation, filters based on Boolean mathematics, noise reduction, edge detection, geometrical filters, cross-correlation filters and image compression are some examples of the filters that have been studied and successfully implemented in the software application. The software application developed during the research is customized in order to meet the requirements of the industrial partner. The application is able to analyze pictures, perform the filtering, build libraries, process images and generate log files. It incorporates most of the filters studied and together with the illumination system and the camera it provides a fully integrated framework able to analyze defects on printed circuit boards.

Management and evaluation of a range of forest species for use as cut foliage

This project explored the possibility of harvesting marketable foliage stems in addition to producing timber from plantations of Larix leptolepis, Cupressus macrocarpa ‘Goldcrest’ and Tsuga heterophylla. Data recorded from trial sites included both growth parameters, in the form of height and diameter increments, and production parameters in the form of foliage stem yields. Results varied with species and site type. In many cases, results achieved appear to have been influenced more by the biology of the trees than by the treatments alone. Trials were also established to investigate methods of managing old or over grown Abies procera Christmas tree plantations for forest foliage production. Shelf life testing and market research into the domestic trade of forest foliage were also conducted over the course of the project. Recommendations for managing forest plantations for foliage production as well as a general discussion on the industry are presented in this report.

The effects of detergent loading on rotating biological contactor (RBC) wastewater treatment efficiency

There are presently over 182 RBC plants, treating domestic wastewater, in the Republic of Ireland, 136 of which have been installed since 1986. The use of this treatment plant technology, although not new, is becoming increasingly popular. The aim of this research was to assess the effects that a household detergent has on rotating biological contractor treatment plant efficiency. Household detergents contribute phosphorus to the surrounding environment and can also remove beneficial biomass from the disc media. A simple modification was made to a conventional flat disc unit to increase the oxygen transfer of the process. The treatment efficiency of the modified RBC (with aeration cups attached) was assessed against a parallel conventional system, with and without degergent loading. The parameters monitored were chemical oxygen demand (COD), bio-chemical oxygen demand (BOD), nitrates, phosphates, dissolved oxygen, the motors power consumption, pH, and temperature. Some microscopic analysis of the biofilm was also to be carried out. The treatment efficiency of both units was compared, based on COD/BOD removal. The degree of nitrification achievable by both units was also assessed with any fluctuations in pH noted. Monitoring of the phosphorus removal capabilities of both units was undertaken. Relationships between detergent concentrations and COD removal efficiencies were also analysed.

Synthetic and mechanistic studies of the Thia-Fries Rearrangement

A study has been undertaken of the published literature on the Fries rearrangement, thermal, photo and microwave, since its discovery in 1908. A resume of these publications and especially of those pertaining to the thia-Fries rearrangement of sulfamate esters, has been compiled. Phenyl sulfamate, phenyl N,N-dimethylsulfamate, phenyl N,N-diethylsulfamate and phenyl N,N-di-n-propylsulfamate and many of their substituted compounds have been synthesised and purified, a total of thirty nine esters. The sulfamates have been characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Many of these sulfamates, twenty six in total, have been rearranged to sulfonamides in the thia-Fries rearrangement, and subsequently purified. The products were characterised by mp / bp, infrared, C, H and N microanalysis and mass spectrum. Mechanistic studies of the sulfamates have been investigated, particularly phenyl N,N-dimethylsulfamate. The rearrangement with various catalysts and catalytic ratios, the effect of solvents on the rearrangement and many crossover experiments have been carried out to determine the molecularity i.e. whether it is an inter-, intra- or bimolecular reaction. The microwave induced thia-Fries rearrangement has been examined to determine what effect this irradiation has on the rearrangement. Photo thia-Fries rearrangement has also been investigated.

Development of a rehabilitation system for the red mud waste generated at the Aughinish Alumina Bayer Plant

Aughinish Alumina Limited (AAL) have an obligation by terms of their Integrated Pollution Control Licence (IPCL) and Planning Permission to establish vegetation on the red mud stack at their plant at Aughinish, Co. Limerick. High pH and high exchangeable sodium percentage are the main known factors limiting the establishment of vegetation on red mud. Gypsum addition has been known to assist in alleviating these problems in other countries. However, there is no experience or published information on red mud rehabilitation under Irish conditions. Red mud with organic and inorganic waste-derived ameliorants as well as selected grassland species were examined under laboratory controlled environment conditions as well as in field plot trials. Also, in order that it would be economically achievable, the research utilised locally available waste products as the organic amendments. Screening trials found that physical constraints severely limit plant germination and growth in red mud. Gypsum addition effectively lowers pH, exchangeable sodium percentage and the availability of A1 and Fe in the mud. A strong relationship between pH, ESP and A1 levels was also found. Gypsum addition increased germination percentages and plant growth for all species investigated. Greenhouse trials demonstrated that organic wastes alone did not greatly improve conditions for plant growth but when used in conjunction with gypsum plant performances for all species investigated was significantly increased. There was a high mortality rate for grasses in non-gypsum treatments. An emerging trend of preferential iron uptake and calcium deficiency in non-gypsum treatments was found at pot screening stage. Species also displayed manganese and magnesium deficiencies.

The production of vermicompost from dairy sludge and its value as a plant growth medium

Dairy sludge generated at Glanbia Ingredients Ltd., Kilkenny has up until now been landspread. This study investigated the feasibility of using earthworms to vermicompost the sludge as an alternative method of treatment. It was found that high levels of ammonia in the sludge led to earthworm fatality but that by manually aerating the sludge the ammonia could be volatilised or by adding zeolite the ammonia could be absorbed, thus solving the problem. In a medium scale trial, the earthworm species Dendrobaena veneta and Eisenia fetida dominated the polyculture. Earthworms grew and generated cocoons during vermicomposting. During vermicomposting no leachate was generated. Nutrient changes took place during vermicomposting. There were high levels of nitrate, increased calcium and sulphate in the vermicomposted dairy sludge. The amount of magnesium, potassium and chloride did not change, while phosphate was undetectable after vermicomposting. The levels of nitrate and phosphate were good indicators of the extent of vermicomposting. The vermicomposted dairy sludge provided improved growth and yields of radishes and barley compared to the dairy sludge and control. Compared to the vermicompost, the dairy sludge provided heavier ryegrass yields and more marigolds with larger flower diameters. Generally, it is the amount of phosphate in dairy sludge that dictates how much can be applied as a fertiliser on land. Vermicomposting reduced the amount of phosphate to an undetectable level but on the other hand created a problem of high nitrate levels. In a pot trial with grass grown in vermicompost the nitrate leached from the vermicompost. In field conditions the leaching of nitrate might occur and could cause an increased risk of contamination of groundwater and watercourses.

Data for the sustainable management of an emerging fishery: Age, growth and stock structure of Atlantic saury Scomberesox saurus saurus (Walbaum), in the Northeastern Atlantic Ocean

Almost half of Ireland’s commercial stocks face overexploitation. As traditional species decrease in abundance and become less profitable, the industry is increasingly turning to alternate species. Atlantic saury (Scomberesox saurus saurus (Walbaum)) has been identified as a potential species for exploitation. Very little information is available on its biology or population dynamics, especially for Irish waters. This thesis aims to obtain sound scientific data, which will help to ensure that a future Atlantic saury fishery can be sustainably managed. The research has produced valuable data, some of which contradicts previous studies. Growth of Atlantic saury measured using otolith microstructure is found to be more than twice that previously calculated from annual structures on scales and otoliths. This results in a significant reduction of the expected life span from five to about two years. Investigation of maturity stage at age indicates that Atlantic saury will reproduce for the first time at age one and will survive for one or at most two reproduction seasons. It is concluded that a future Irish fishery will target mostly fish prior to their first reproduction. Finally the thesis gives some insights into the population structure of Atlantic saury, by analysis of otolith morphometric. Significant differences are detected between Northeastern Atlantic and western Mediterranean Sea specimens of the 0+ age class (less than one year old). The implications of these results for the management of an emerging fishery are discussed.

Evaluation of the determinism of the actuator sensor interface (ASI) on programmable logic controllers (PLC), personal computers (PC) and real-time operating systems (RTOS)

The purpose of this study was to evaluate the determinism of the AS-lnterface network and the 3 main families of control systems, which may use it, namely PLC, PC and RTOS. During the course of this study the PROFIBUS and Ethernet field level networks were also considered in order to ensure that they would not introduce unacceptable latencies into the overall control system. This research demonstrated that an incorrectly configured Ethernet network introduces unacceptable variable duration latencies into the control system, thus care must be exercised if the determinism of a control system is not to be compromised. This study introduces a new concept of using statistics and process capability metrics in the form of CPk values, to specify how suitable a control system is for a given control task. The PLC systems, which were tested, demonstrated extremely deterministic responses, but when a large number of iterations were introduced in the user program, the mean control system latency was much too great for an AS-I network. Thus the PLC was found to be unsuitable for an AS-I network if a large, complex user program Is required. The PC systems, which were tested were non-deterministic and had latencies of variable duration. These latencies became extremely exaggerated when a graphing ActiveX was included in the control application. These PC systems also exhibited a non-normal frequency distribution of control system latencies, and as such are unsuitable for implementation with an AS-I network. The RTOS system, which was tested, overcame the problems identified with the PLC systems and produced an extremely deterministic response, even when a large number of iterations were introduced in the user program. The RTOS system, which was tested, is capable of providing a suitable deterministic control system response, even when an extremely large, complex user program is required.

Ireland’s understudied flatfish: reproduction, age and growth of the dab Limanda limanda (L.) in Irish coastal waters

In Ireland, although flatfish form a valuable fishery, little is known about the smallest, the dab Limanda limanda. In this study, a variety of parameters of reproductive development, including ovarian phase description, gonadosomatic index (GSI), hepatosomatic index (HSI), relative condition (Kn) and oocyte size were analysed to provide information on the dab’s reproductive cycle and spawning periods. Sampling were collected monthly over an 18-month period using bottom trawls of the Irish coastline. A six phase macroscopic guide was developed for both sexes of dab, and verified using histology. In comparisons of macroscopic and microscopic phases, there was high agreement in the proposed female guide (86%), with males demonstratively lower (62%). No significant bias was observed between the the two reproductive methods. When the male macroscopic guide was examined, misclassification was high in phase 5 and phase 5 (41%), with 96% of misclassification occurring in adjacent phases. The sampled population was primarily composed of females, with ratios of females to males 1:0.6, although the predominance of females was less noticeable during the reproductive season. Oocyte growth in dab follows asynchronous development, and spawn over a protracted period indicating a batch spawning strategy. Spawning occurred mainly in early spring, with total regeneration of gonads by May. The length at which 50% of the population was reproductively mature was identified as 14cm and 17cm, for male and female dab, respectively. Precision and bias in age determinations using whole otoliths to age dab was investigated using six age readers from various institutions. Low levels of precision were obtained (CV: 10-23%) inferring the need for an alternative methodology. Precision and bias was influence by the level of experience of the reader, with ageing error attributed to interpretative differences and difficulty in edge determination. Sectioned otolith age determinations were subsequently compared to whole otolith age determinations using two age readers experienced in dab ageing. Although increased precision was observed in whole otoliths from previous estimates (CV=0%, 0% APE), sectioned otoliths were used for growth models. This was based on multinominal logistic regression on age length keys developed using both ageing methods. Biological data (length and age) for both sexes was applied to four growth models, where the Akaike criterion and Multi model Inference indicated the logistic model as having the best fit to the collected data. In general, female dab attained a longer length then males, with growth rates significantly different between the two sexes. Length weight relationships between the two sexes were also significantly different.

Effects of selected post harvest processes on brown crab (Cancerpagurus L.) and European lobster (Homarus gammarus L.) from Irish Crustacean Fisheries

The crustacean fishery is important to the socio economics of rural and island communities around Ireland; with brown crab (Cancer pagurus) and European lobster (.Homarus gammarus) being the most valuable shellfish species. Brown crab and lobster are marketed live with the majority being exported from Ireland to southern Europe. Post capture processes used in Ireland are very subjective but promote fresh, live products. Common practices used in the crustacean fishery include nicking of brown crab and long term storage of lobster. This study showed that nicking resulted in elevated mean lactate levels of 17.90% (StDev ± 1.74) and elevated mean glucose levels of 120.55 % (StDev ± 0.26) with mean circulating bacteria levels 9 times greater in nicked crab. Nicking resulted in 96.3% increase in tissue necrosis and a subsequent reduction in product quality. These factors possibly compromise the host’s defense system, which may ultimately reduce the animal’s ability to cope with additional stressors caused by post-harvest processes. Long term storage allows lobster to be stored until the market is less saturated and prices are higher. This investigation found that some lobsters contracted bacterial biofilms as a result of long term storage. Bacteria isolated from biofilms were identified as Arcobacter and Campylobacterales with identity and alignment scores of 80% andd 88% respectively.

Development of an inspection regime for on-site domestic wastewater treatment systems

The overall purpose of this study was to develop a thorough inspection regime for onsite wastewater treatment systems, which is practical and could be implemented on all site conditions across the country. With approximately 450,000 onsite wastewater treatment systems in Ireland a risk based methodology is required for site selection. This type of approach will identify the areas with the highest potential risk to human health and the environment and these sites should be inspected first. In order to gain the required knowledge to develop an inspection regime in-depth and extensive research was earned out. The following areas of pertinent interest were examined and reviewed, history of domestic wastewater treatment, relevant wastewater legislation and guidance documents and potential detrimental impacts. Analysis of a questionnaire from a prior study, which assessed the resources available and the types of inspections currently undertaken by Local authorities was carried out. In addition to the analysis of the questionnaire results, interviews were carried out with several experts involved in the area of domestic wastewater treatment. The interview focussed on twelve key questions which were directed towards the expert’s opinions on the vital aspects of developing an inspection regime. The background research, combined with the questionnaire analysis and information from the interviews provided a solid foundation for the development of an inspection regime. Chapter 8 outlines the inspection regime which has been developed for this study. The inspection regime includes a desktop study, consultation with the homeowners, visual site inspection, non-invasive site tests, and inspection of the treatment systems. The general opinion from the interviews carried out, was that a standardised approach for the inspections was necessary. For this reason an inspection form was produced which provides a standard systematic approach for inspectors to follow. This form is displayed in Appendix 3. The development of a risk based methodology for site selection was discussed and a procedure similar in approach to the Geological Survey of Irelands Groundwater Protection Schemes was proposed. The EPA is currently developing a risk based methodology, but it is not available to the general public yet. However, the EPA provided a copy of a paper outlining the key aspects of their methodology. The methodology will use risk maps which take account of the following parameters: housing density, areas with inadequate soil conditions, risk of water pollution through surface and subsurface pathways. Sites identified with having the highest potential risk to human health and the environment shall be inspected first. Based on the research carried out a number of recommendations were made which are outlined in Chapter 10. The principle conclusion was that, if these systems fail to operate satisfactorily, home owners need to understand that these systems dispose of the effluent to the 'ground' and the effluent becomes part of the hydrological cycle; therefore, they are a potential hazard to the environment and human health. It is the owners, their families and their neighbours who will be at most immediate risk.