Species and composition of tundra meadows

Observations of hummock and string-like microrelief features were made in High Arctic hydric meadows. Thermal shearing of thick bryophyte mats, and subsequent roll back during spring flooding appears to be one way in which this topography is formed. Hummocky and non-hummocky (flat) meadows show distinct floristic differences which may in part be due to observed differences in temperature, nutrient concentrations and moisture relations.

Minería metalífera en Santa Cruz : Empleo y matriz productiva

El presente estudio se propone realizar una caracterización de la minería metalífera en la Provincia de Santa Cruz. Esta actividad comenzó a desarrollarse en esa provincia desde mediados de los años 90 y, hasta la fecha, creció en forma sostenida como consecuencia del cruce de una serie de circunstancias favorables: a) las modificaciones en la legislación, que favorecieron la inversión minera al equiparar en oportunidades a la República Argentina con Chile y el Perú, países con un elevado desarrollo minero gracias a la importante inversión externa directa; b) el potencial minero de la provincia; c) la crisis en el sector lanero -especialmente en la meseta central de la provincia- que llevó a un despoblamiento de los campos de actual explotación minera, lo que redujo la potencial conflictividad entre la minería y la ganadería y facilitó a la nueva actividad la adquisición de propiedades a bajos precios, presentándola, además, como un sector generador de empleo; d) la lejanía de los yacimientos mineros de los centros poblados de la provincia, que favoreció un consenso social superior al verificado en otras regiones del país. En la actualidad, en un contexto de aumento generalizado de los precios internacionales de las commodities, se observa un constante incremento de la actividad minera en la Provincia de Santa Cruz. Ello ha conducido a la incorporación de nuevas tecnologías de producción para la recuperación mineral y a dar impulso a nuevas explotaciones

Strength and deformation behavior of ODP Leg 110 sediments

The shape and morphology of the northern Barbados Ridge complex is largely controlled by the sediment yield and failure behavior in response to high lateral loads imposed by convergence. Loads in excess of sediment yield strength result in nonrecoverable deformations within the wedge, and failure strength acts as an upper limit beyond which stresses are released through thrust faults. Relatively high loading rates lead to delayed consolidation and in-situ pore pressures greater than hydrostatic. The sediment yield and failure behavior is described for any stress path by a generalized constitutive model. A yield locus delineates the onset of plastic (non-recoverable) deformation, as defined from the isotropic and anisotropic consolidation responses of high-quality 38-mm triaxial specimens; a failure envelope was obtained by shearing the same specimens in both triaxial compression and extension. The yield locus is shown to be rotated into extension space and is centered about a K-line greater than unity, suggesting that the in-situ major principal stress has rotated into the horizontal plane, and that the sediment wedge is being subjected to extensional effective stress paths.

Prominent deformation features and interpretation of sediment core CRP-2/2A (Table 1)

Sediment deformation features in CRP-2/2A were described during normal logging procedures and from core-scan images. In this paper the origin of soft-sediment folding, contorted bedding, microfaulting, clastic dykes, shear zones and intraformational breccias is discussed. The features have a stratigraphic distribution related to major unconformities and sequence boundaries. Hypotheses for the origins of sediment deformation include hydrofracturing, subglacial shearing, slumping, and gas hydrate formation. Shear zones, microfaults, clastic dykes and contorted bedding within rapidly deposited sediments, suggest that slumping in an ice-distal environment occurred in the early Oligocene. A till wedge beneath a diamictite at 364 mbsf the mid-Oligocene section represents the oldest evidence of grounded ice in CRP-2/2A. Shear zones with a subglacial origin in the early late Oligocene and early Miocene sections of the core are evidence of further grounding events. The interpretation of sediment deformation in CRP-2/2A is compared to other Antarctic stratigraphic records and global eustatic change between the late Eocenel/early Oligocene and the middle Miocene.

Partial melting experiments on oceanic cumulated gabbros

We performed hydrous partial melting experiments at shallow pressures (0.2 GPa) under slightly oxidizing conditions (NNO oxygen buffer) on oceanic cumulate gabbros drilled by ODP (Ocean Drilling Program) cruises to evaluate whether the partial melting of oceanic gabbro can generate SiO2-rich melts with compositions typical of oceanic plagiogranites. The experimental melts of the low-temperature runs broadly overlap those of natural plagiogranites. At 940 °C, the normalized SiO2 contents of the experimental melts of all systems range between 60 and 61 wt%, and at 900 °C between 63 and 68 wt%. These liquids are characterized by low TiO2 and FeOtot contents, similar to those of natural plagiogranites from the plutonic section of the oceanic crust, but in contrast to Fe and Ti-rich low-temperature experimental melts obtained in MORB systems at ~950 °C. The ~1,500-m-long drilled gabbroic section of ODP Hole 735B (Legs 118 and 176) at the Southwest Indian Ridge contains numerous small plagiogranitic veins often associated with zones which are characterized by high-temperature shearing. The compositions of the experimental melts obtained at low temperatures match those of the natural plagiogranitic veins, while the compositions of the crystals of low-temperature runs correspond to those of minerals from high-temperature microscopic veins occurring in the gabbroic section of the Hole 735B. This suggests that the observed plagiogranitic veins are products of a partial melting process triggered by a water-rich fluid phase. If the temperature estimations for hightemperature shear zones are correct (up to 1,000 °C), and a water-rich fluid phase is present, the formation of plagiogranites by partial melting of gabbros is probably a widespread phenomenon in the genesis of the ocean crust.

Permeability measurements on sheared and unsheared samples from different IODP Holes of Leg 316 and from IODP Hole 315-C0001E and ODP Hole 190-1174B

At subduction zones, the permeability of major fault zones influences pore pressure generation, controls fluid flow pathways and rates, and affects fault slip behavior and mechanical strength by mediating effective normal stress. Therefore, there is a need for detailed and systematic permeability measurements of natural materials from fault systems, particularly measurements that allow direct comparison between the permeability of sheared and unsheared samples from the same host rock or sediment. We conducted laboratory experiments to compare the permeability of sheared and uniaxially consolidated (unsheared) marine sediments sampled during IODP Expedition 316 and ODP Leg 190 to the Nankai Trough offshore Japan. These samples were retrieved from: (1) The décollement zone and incoming trench fill offshore Shikoku Island (the Muroto transect); (2) Slope sediments sampled offshore SW Honshu (the Kumano transect) ~ 25 km landward of the trench, including material overriden by a major out-of-sequence thrust fault, termed the "megasplay"; and (3) A region of diffuse thrust faulting near the toe of the accretionary prism along the Kumano transect. Our results show that shearing reduces fault-normal permeability by up to 1 order of magnitude, and this reduction is largest for shallow (< 500 mbsf) samples. Shearing-induced permeability reduction is smaller in samples from greater depth, where pre-existing fabric from compaction and lithification may be better developed. Our results indicate that localized shearing in fault zones should result in heterogeneous permeability in the uppermost few kilometers in accretionary prisms, which favors both the trapping of fluids beneath and within major faults, and the channeling of flow parallel to fault structure. These low permeabilities promote the development of elevated pore fluid pressures during accretion and underthrusting, and will also facilitate dynamic hydrologic processes within shear zones including dilatancy hardening and thermal pressurization.

Tab.1: Total estimated muskox numbers and quotas in management zones of the Northwest Territories and Nunavut

In view of the drastic growth in the Canadian Inuit population, the rising costs of living, the missing job and income alternatives and the high unemployment rate in the arctic, efforts are being made to make use of the muskox populations in order to provide additional sources of food and/or revenue. The present paper attempts to review the course of muskox utilization in the Canadian Arctic and to tentatively assess its present as weIl as its future economic importance. Starting with the pre-European status of muskoxen in Canada, the drastic reduction in numbers resulting from the combined efforts of hide traders, whalers and expedition parties in the 19th and early 20th centuries, the impact of the legal protection and the recovery since 1917 are being described. Establishing muskox farms with semi-domesticated herds failed in Canada in the 1970's. Since 1969, though, increasing numbers of animals have been allotted to many Inuit communities, and despite the fact that most of the animals were primarily used for subsistence purposes, some communities could reserve part of their quotas for trophy (sport) hunters. While controlled sustainable subsistence and trophy hunts may eventually be carried out over the whole muskox range, including recently colonized northern Quebec, commercial harvesting for meat, hides and wool, introduced in 1981, will at least for some time be restricted to Banks and Victoria islands which at present show 78 % of the Canadian muskox population and 94 % of the overall quota.