Project «Water and Environment»: Improving educational practices in the aquatic environment

The project "Water and Environment"for the improvement of educational practices in the aquatic environment, is a research project led by four members of the Research Group of Physical Education at the University of Vic (GREF) experts in water activities. The aim is to train the technicians who teach swimming during school hours. The training is based on improving water treatment practices and competence to face a contradictory scene where clubs develop educational content and where schools transfer to clubs part of its educational activity to contribute significantly and positively to water activities fitting the educational curriculum.

Wet oxidation of recalcitrant lignin waters: Experimental and kinetic studies

The dissertation is based on four articles dealing with recalcitrant lignin water purification. Lignin, a complicated substance and recalcitrant to most treatment technologies, inhibits seriously pulp and paper industry waste management. Therefore, lignin is studied, using WO as a process method for its degradation. A special attention is paid to the improvement in biodegradability and the reduction of lignin content, since they have special importance for any following biological treatment. In most cases wet oxidation is not used as a complete ' mineralization method but as a pre treatment in order to eliminate toxic components and to reduce the high level of organics produced. The combination of wet oxidation with a biological treatment can be a good option due to its effectiveness and its relatively low technology cost. The literature part gives an overview of Advanced Oxidation Processes (AOPs). A hot oxidation process, wet oxidation (WO), is investigated in detail and is the AOP process used in the research. The background and main principles of wet oxidation, its industrial applications, the combination of wet oxidation with other water treatment technologies, principal reactions in WO, and key aspects of modelling and reaction kinetics are presented. There is also given a wood composition and lignin characterization (chemical composition, structure and origin), lignin containing waters, lignin degradation and reuse possibilities, and purification practices for lignin containing waters. The aim of the research was to investigate the effect of the operating conditions of WO, such as temperature, partial pressure of oxygen, pH and initial concentration of wastewater, on the efficiency, and to enhance the process and estimate optimal conditions for WO of recalcitrant lignin waters. Two different waters are studied (a lignin water model solution and debarking water from paper industry) to give as appropriate conditions as possible. Due to the great importance of re using and minimizing the residues of industries, further research is carried out using residual ash of an Estonian power plant as a catalyst in wet oxidation of lignin-containing water. Developing a kinetic model that includes in the prediction such parameters as TOC gives the opportunity to estimate the amount of emerging inorganic substances (degradation rate of waste) and not only the decrease of COD and BOD. The degradation target compound, lignin is included into the model through its COD value (CODligning). Such a kinetic model can be valuable in developing WO treatment processes for lignin containing waters, or other wastewaters containing one or more target compounds. In the first article, wet oxidation of "pure" lignin water was investigated as a model case with the aim of degrading lignin and enhancing water biodegradability. The experiments were performed at various temperatures (110 -190°C), partial oxygen pressures (0.5 -1.5 MPa) and pH (5, 9 and 12). The experiments showed that increasing the temperature notably improved the processes efficiency. 75% lignin reduction was detected at the lowest temperature tested and lignin removal improved to 100% at 190°C. The effect of temperature on the COD removal rate was lower, but clearly detectable. 53% of organics were oxidized at 190°C. The effect of pH occurred mostly on lignin removal. Increasing the pH enhanced the lignin removal efficiency from 60% to nearly 100%. A good biodegradability ratio (over 0.5) was generally achieved. The aim of the second article was to develop a mathematical model for "pure" lignin wet oxidation using lumped characteristics of water (COD, BOD, TOC) and lignin concentration. The model agreed well with the experimental data (R2 = 0.93 at pH 5 and 12) and concentration changes during wet oxidation followed adequately the experimental results. The model also showed correctly the trend of biodegradability (BOD/COD) changes. In the third article, the purpose of the research was to estimate optimal conditions for wet oxidation (WO) of debarking water from the paper industry. The WO experiments were' performed at various temperatures, partial oxygen pressures and pH. The experiments showed that lignin degradation and organics removal are affected remarkably by temperature and pH. 78-97% lignin reduction was detected at different WO conditions. Initial pH 12 caused faster removal of tannins/lignin content; but initial pH 5 was more effective for removal of total organics, represented by COD and TOC. Most of the decrease in organic substances concentrations occurred in the first 60 minutes. The aim of the fourth article was to compare the behaviour of two reaction kinetic models, based on experiments of wet oxidation of industrial debarking water under different conditions. The simpler model took into account only the changes in COD, BOD and TOC; the advanced model was similar to the model used in the second article. Comparing the results of the models, the second model was found to be more suitable for describing the kinetics of wet oxidation of debarking water. The significance of the reactions involved was compared on the basis of the model: for instance, lignin degraded first to other chemically oxidizable compounds rather than directly to biodegradable products. Catalytic wet oxidation of lignin containing waters is briefly presented at the end of the dissertation. Two completely different catalysts were used: a commercial Pt catalyst and waste power plant ash. CWO showed good performance using 1 g/L of residual ash gave lignin removal of 86% and COD removal of 39% at 150°C (a lower temperature and pressure than with WO). It was noted that the ash catalyst caused a remarkable removal rate for lignin degradation already during the pre heating for `zero' time, 58% of lignin was degraded. In general, wet oxidation is not recommended for use as a complete mineralization method, but as a pre treatment phase to eliminate toxic or difficultly biodegradable components and to reduce the high level of organics. Biological treatment is an appropriate post treatment method since easily biodegradable organic matter remains after the WO process. The combination of wet oxidation with subsequent biological treatment can be an effective option for the treatment of lignin containing waters.

The Methods of Possible Joint Treatment of Manure and Sewage Sludge in the Leningrad Region

The nutrient load to the Gulf of Finland has started to increase as a result of the strong economic recovery in agriculture and livestock farming in the Leningrad region. Also sludge produced from municipal wastewater treatment plant of the Leningrad region causes the great impact on the environment, but still the main options for its treatment is disposal on the sludge beds or Landfills. The aim of this study was to evaluate the implementation of possible joint treatment methods of manure form livestock and poultry enterprises and sewage sludge produced from municipal wastewater treatment plants in the Leningrad region. The study is based on published data. The most attention was put on the anaerobic digestion and incineration methods. The manure and sewage sludge generation for the whole Leningrad region and energy potential produced from their treatment were estimated. The calculations showed that total amount of sewage sludge generation is 1 348 000 t/a calculated on wet matter and manure generation is 3 445 000 t/a calculated on wet matter. The potential heat release from anaerobic digestion process and incineration process is 4 880 000 GJ/a and 5 950 000 GJ/a, respectively. Furthermore, the work gives the overview of the general Russian and Finnish legislation concerning manure and sewage sludge treatment. In the Gatchina district it was chosen the WWTP and livestock and poultry enterprises for evaluation of the centralized treatment plant implementation based on anaerobic digestion and incineration methods. The electricity and heat power of plant based on biogas combustion process is 4.3 MW and 7.8 MW, respectively. The electricity and heat power of plant based on manure and sewage sludge incineration process is 3.0 MW and 6.1 MW, respectively.

Alusöljyvahingossa kuolleiden eläinten turvallinen käsittely

Diplomityö on osa Kymenlaakson ammattikorkeakoulun SÖKÖ II-hanketta, missä tehdään toimintamalli suuren öljyntorjuntaoperaation koordinointiin rannikon öljytorjunnasta vastaaville viranomaisille. Työn tavoitteena oli selvittää alusöljyvahingossa kuolleiden eläinten sekä eläinten keräilystä ja hoidosta syntyvien jätteiden käsittelymenetelmät ja soveltuvat käsittelylaitokset. Lisäksi tavoitteena oli selvittää kuolleiden eläinten välivarastointialueen tekniset vaatimukset ja öljyiselle eläinjätteelle soveltuva kuljetuskalusto. Työn teoriaosuudet toteutettiin kirjallisten lähteiden ja asiantuntijahaastatteluiden avulla. Tärkeäksi osaksi työtä muodostui kustannuslaskelma, missä laskettiin kuolleiden eläinten keräilystä aina loppukäsittelyyn asti muodostuvat kustannukset. Työn teoriaosuudet loivat pohjan kustannuslaskelmalle. Kuolleiden eläinten loppukäsittelyyn valittiin kolme eri laitosta ja kolme eri käsittelytekniikkaa, mitkä ovat: rumpu-uuni, siirrettävä termodesorptio ja renderöinti. Kuolleet eläimet kannattaa keskitetysti kerätä ja kuljettaa yhdelle alueelle, missä suoritetaan kuolleiden eläinten välivarastointi kylmäkonteissa ja tilastointi sekä elävien eläinten pesu ja hoito. Kustannuslaskelman perusteella siirrettävä termodesorptiolaitos on halvin käsittelyvaihtoehto, mutta kustannuserot muihin laitoksiin ovat pienet. Koko kuolleiden eläinten turvallisen käsittelyn kustannukset ovat alle promillen koko suuren öljyvahingon kustannuksista. Loppukäsittelylaitosta valittaessa on käsittelykustannuksia tärkeämpää selvittää laitoksen sen hetkinen jätteenkäsittelytilanne ja vapaa käsittelykapasiteetti kuolleille eläimille.

Sewage Sludge Electro-Dewatering

Original sludge from wastewater treatment plants (WWTPs) usually has a poor dewaterability. Conventionally, mechanical dewatering methods are used to increase the dry solids (DS) content of the sludge. However, sludge dewatering is an important economic factor in the operation of WWTPs, high water content in the final sludge cake is commonly related to an increase in transport and disposal costs. Electro‐dewatering could be a potential technique to reduce the water content of the final sludge cake, but the parameters affecting the performance of electro‐dewatering and the quality of the resulting sludge cake, as well as removed water, are not sufficiently well known. In this research, non‐pressure and pressure‐driven experiments were set up to investigate the effect of various parameters and experimental strategies on electro‐dewatering. Migration behaviour of organic compounds and metals was also studied. Application of electrical field significantly improved the dewatering performance in comparison to experiments without electric field. Electro‐dewatering increased the DS content of the sludge from 15% to 40 % in non‐pressure applications and from 8% to 41% in pressure‐driven applications. DS contents were significantly higher than typically obtained with mechanical dewatering techniques in wastewater treatment plant. The better performance of the pressure‐driven dewatering was associated to a higher current density at the beginning and higher electric field strength later on in the experiments. The applied voltage was one of the major parameters affecting dewatering time, water removal rate and DS content of the sludge cake. By decreasing the sludge loading rate, higher electrical field strength was established between the electrodes, which has a positive effect on an increase in DS content of the final sludge cake. However interrupted voltage application had anegative impact on dewatering in this study, probably because the off‐times were too long. Other factors affecting dewatering performance were associated to the original sludge characteristics and sludge conditioning. Anaerobic digestion of the sludge with high pH buffering capacity, polymer addition and freeze/thaw conditioning had a positive impact on dewatering. The impact of pH on electro‐dewatering was related to the surface charge of the particles measured as zeta‐potential. One of the differences between electro‐dewatering and mechanical dewatering technologies is that electro‐dewatering actively removes ionic compounds from the sludge. In this study, dissolution and migration of organic compounds (such as shortchain fatty acids), macro metals (Na, K, Ca, Mg, Fe) and trace metals (Ni, Mn, Zn, Cr) was investigated. The migration of the metals depended on the fractionation and electrical field strength. These compounds may have both negative and positive impacts on the reuse and recycling of the sludge and removed water. Based on the experimental results of this study, electro‐dewatering process can be optimized in terms of dewatering time, desired DS content, power consumption and chemical usage.

Evaluation of the effect of the seed extract of Moringa oleifera Lam over the efficiency of organic filters in wastewater treatment of dairy cattle breeding

This study aimed to evaluate the effect of Moringa oleifera Lam extract on the removal of total solids (TS), total suspended solids (TSS) and chemical oxygen demand (COD), in different filter media for treating wastewater of dairy cattle breeding (DCW). The moringa seed extract was obtained by grinding 50 g of seeds in one liter of distilled water and, after passing the solution through a quantitative paper filter of 25 microns, 60 mL of the extract were added to wastewater from cattle breeding before the filtration process in organic filters made of thin coal, bamboo leaves, eucalyptus leaves, gliricidia branches and sawdust. This was followed by the completely randomized experimental design, adopting a factorial of 5 x 2. Aliquots of filtered effluent were collected and the total solids (TS) concentrations, total suspended solids (TSS) and chemical oxygen demand (COD) were determined. It was found that the increase in the efficiency of removal of COD and total solids can be attributed to the coagulating power of the moringa seed extract, wherein the filter medium with bamboo leaves presented the best performance, showing potential for use as alternative filter material in the primary treatment of DCW.

Deficit irrigation in grapevine cv. Syrah during two growing seasons in the brazilian semiarid

Irrigation plays an important role for grape’s yield as well as on its quality for winemaking. Thus, the effects of deficit irrigation strategies on yield and quality of wine grapes cv. Syrah were evaluated in Petrolina, State of Pernambuco, Brazil. Evaluations were carried out throughout the second and third growing seasons, which were from November 2010 to February 2011 (rainy season) and from May to September 2011 (dry season), respectively. Vines were drip irrigated and the experimental design was completely randomized with three treatments and four replications. The treatments were full irrigation (FI), performed according crop evapotranspiration; regulated deficit irrigation (RDI), in which irrigation was interrupted in phenological growth stage of bunch closure, but was occasionally performed according soil water monitoring of the root zone; and deficit irrigation (DI), when irrigation was interrupted from bunch closure to harvesting. Differences on leaf water content among treatments were observed in both growing seasons and RDI and DI treatment plants presented moderate water stress. The number of bunches did not differ among treatments in both growing seasons; however, bunch weight per plant, average bunch weight and soluble solid content were higher in FI treatment during the dry season. Deficit irrigation strategies promoted water saving.

Kirkkaasta sameaan : Meren kuormitus ja tila Saaristomerellä ja Ahvenanmaalla

Tässä raportissa tarkastellaan Saaristomeren ja Ahvenmaan merialueen kuormitusta ja tilaa ja niissä viime vuosikymmeninä tapahtuneita muutoksia vuosiin 2008 ja 2009 saakka. Pääpaino on ravinnekuormituksessa ja veden laadussa, mutta mukana on taustatietoa ja muun muassa katsaus kalakannoista. Saaristomeren ja Ahvenanmaan merialueen tila on heikentynyt huomattavasti viimeisten vuosikymmenten aikana. Erityisesti fosforin ja a-klorofyllin määrät ovat kasvaneet ja näkösyvyys pienenentynyt. Viimeisen kymmenen vuoden aikana pintaveden fosforipitoisuuden kasvu on laantunut suurimmassa osassa aluetta, mutta pohjanläheisessä vesikerroksessa ja talvella fosforipitoisuus on jatkanut kasvuaan monin paikoin viime vuosiin asti. Myös a-klorofyllin määrä on lisääntynyt ulko- ja välisaaristossa 2000-luvullakin. Viime vuosina klorofyllipitoisuuden kasvu on kuitenkin laantunut tai pitoisuus laskenut varsinkin rannikonläheisissä vesissä. Merialueen suurin paikallinen ravinnekuormittaja on maatalous, mutta varsinkin typpeä tulee runsaasti myös ilmalaskeumana. Sisäinen kuormitus ja virtausten mukana Suomenlahdelta ja muualta Itämereltä tulevat ravinteet heikentävät niin ikään merialueen tilaa. Muita ravinnelähteitä ovat mm. haja-asutus, jätevedenpuhdistamot ja kalankasvatus. Ahvenanmaan merialueelle ravinteita tulee enemmän muualta kuin Ahvenanmaalta. Hajakuormituksessa on tapahtunut viime vuosikymmeninä selviä vuodenaikaisia muutoksia. Vuosina 1990 – 2009 jokien mereen tuoma ravinne- ja kiintoainekuormitus on ollut talvisin ja syksyisin selvästi suurempaa kuin vuosina 1970 – 1989. Talviaikaisen kuormituksen lisääntyminen johtuu aiempaa lauhemmista talvista, ja antaa viitteitä ilmastonmuutoksen mukanaan tuomista muutoksista. Vaikka Saaristomeren ja Ahvenanmaan merialueen tilassa on ollut viime aikoina nähtävissä myönteisiäkin merkkejä, on niiden tila edelleen huolestuttava. Ainoa keino merialueen tilan parantamiseksi on kuormituksen huomattava vähentäminen. Vähentäminen koskee niin paikallisia ravinnelähteitä, erityisesti maataloutta, kuin muualta Itämereltä virtausten mukana tulevia ravinteita ja ilmalaskeumaa.

Kompostipiireissä opittua : Eloperäiset jätteet kiertoon -hanke

Kompostien käyttöä on kokeiltu ja tutkittu Kainuun ELY-keskuksen Eloperäiset jätteet kiertoon -hankkeessa. Komposteja on hyödynnetty laskettelurinteen ja kaivosteollisuuden sivukiven läjitysalueen maisemoinnissa, pihanurmen ja energiakasvien kasvattamisessa, metsän lannoittamisessa ja maanviljelyssä. Pihanurmen perustamisen ja energiakasvien kasvattamisen kokeiluista on tehty myös erilliset tutkimukset. Tutkimustyöstä on vastannut MTT (Maa- ja elintarviketalouden tutkimuskeskus). Tutkimustieto on sisällytetty tähän julkaisuun. Kompostin käyttökokeissa ja tutkimuksissa on hyödynnetty Kainuun kuntien ja Kainuun jätehuollon kuntayhtymän Eko-Kympin komposteja. Kaikki kompostit ovat aumakompostoinnin tuotoksia. Eko-Kympin komposti on valmistettu biojätteistä. Muut kompostit ovat lähtöisin kunnallisten jätevedenpuhdistamoiden lietteistä. Kajaanin kompostia kutsutaan myös A. & E. Juntunen Oy:n valmistamaksi biomullaksi. Saatujen kokemusten ja tutkimusten mukaan aumakompostoinnilla tuotettu komposti soveltuu näihin erilaisiin käyttömuotoihin, etenkin kun esille tulleita kehittämistoimia toteutetaan. Sivukiven läjitysalueiden maisemoinnissa, maanviljelyssä ja metsän lannoittamisessa komposti ei tarvitse kivennäismaata seosaineeksi. Sivukiven läjitysalueilla ne kompostit, joihin oli sekoitettu hiekkaa, eivät pysyneet paikoillaan. Aines valui sadeveden mukana alas rinteeltä. Pelkkää kompostia käytettäessä kompostimassa pysyi aloillaan. Maanviljelyssä ja metsän lannoittamisessa kivennäismaa on tarpeeton. Lisäksi kompostissa oleva kiviaines kuluttaa ja voi vaurioittaa levityslaitteita. Ravinteet vapautuvat kompostista hitaasti kasvien käyttöön. Kemiallisilla lannoitteilla on nopeampi vaikutus. Kompostit soveltuvat erityisen hyvin ympäristöihin, joissa täydennyslannoitusta ei tarvita tai joissa lannoite on vaikeaa levittää. Tällaisia kohteita ovat esimerkiksi kaivosten sivukiven tai rikastushiekan läjitysalueet tai muut vaikeakulkuiset kohteet. Myös metsien lannoittaminen ja maanviljely ovat Kainuussa kompostien hyödyntämisen osalta alihyödynnettyjä. Pöyry Finland Oy on laatinut Kajaaniin kaavaillulle biologiselle jätteiden käsittelylaitokselle teknistaloudelliset suunnitelmat. Yhtiön tekemissä suunnitelmissa tulee ilmi, että kaikkien Kainuun lietteiden aumakompostointi tuottaisi kompostia 13 000 tonnia vuodessa, kun tukiaine seulotaan erilleen. Mädätys- tai biokaasulaitosvaihtoehdoissa lopputuotteen määrä on edellistä pienempi. Pelkkien Kainuun lietteiden mädättäminen tuottaisi kompostia jälkikompostin seulonnan jälkeen 6 600 tonnia. Viherrakentaminen taajamissa on komposteille Kainuussa yleinen käyttömuoto. Sillä on kasvun edellytyksiä etenkin, kun kompostin laatuun panostetaan. Viherrakentaminen Kajaanin seudulla riittäisi kuluttamaan kaiken Kainuussa muodostuvan kompostin, kun kompostimullan kulutuksena pidetään 0,5 tonnia asukasta kohden vuodessa. Tämä vastaa Kajaanin seudulla 27 000 tonnin kompostimäärää. Kompostin muodostumismäärä ei tulevaisuudessa tule olemaan lähellä tätä laskennallista multamenekkiä. Kompostin huono menekki johtuu joidenkin kuntien osalta pikemminkin huonosta kompostin laadusta kuin markkinoiden kyllästymisestä. Tilanne on korjaantumassa suunnitteilla olevan biologisen jätteiden käsittelylaitoksen myötä. Siinä kompostituotteen laatuun voidaan panostaa tehokkaammin kuin erillisillä pienillä kompostointikentillä.

Identification and application of bile metabolites to assess the exposure of fish to pharmaceuticals in the environment

Thousands of tons of pharmaceuticals are consumed yearly worldwide. Due to the continuous and increasing consumption and their incomplete elimination in wastewater treatment plants (WWTP), pharmaceuticals and their metabolites can be detected in receiving waters, although at low concentrations (ng to low μg/L). As bioactive molecules the presence of pharmaceuticals in the aquatic environment must be considered potentially hazardous for the aquatic organisms. In this thesis, the biotransformation and excretion of pharmaceuticals in fish was studied. The main biotransformation pathways of three anti‐inflammatory drugs, diclofenac, naproxen and ibuprofen, in rainbow trout were glucuronidation and taurine conjugation of the parent compounds and their phase I metabolites. The same metabolites were present in fish bile in aquatic exposures as in fish dosed with intraperitoneal injection. Higher bioconcentration factor in bile (BCFbile) was found for ibuprofen when compared to diclofenac and naproxen. Laboratory exposure studies were followed by a study of uptake of pharmaceuticals in a wild fish population living in lake contaminated with WWTP effluents. Of the analyzed 17 pharmaceuticals and six phase I metabolites, only diclofenac, naproxen and ibuprofen was present in bream and roach bile. It was shown, that diclofenac, naproxen and ibuprofen excreted by the liver can be found in rainbow trout and in two native fish species living in the receiving waters. In the bream and roach bile, the concentrations of diclofenac, naproxen and ibuprofen were roughly 1000 times higher than those found in the lake water, while in the laboratory exposures, the bioconcentration of the compounds and their metabolites in rainbow trout bile were at the same level as in wild fish or an order of magnitude higher. Thus, the parent compounds and their metabolites in fish bile can be used as a reliable biomarker to monitor the exposure of fish to environmental pharmaceuticals present in water receiving discharges from WWTPs.

Electro-Oxidation Treatment of Pulp and Paper Mill Circulating Waters and Wastewaters

Interest in water treatment by electrochemical methods has grown in recent years. Electrochemical oxidation has been applied particularly successfully to degrade different organic pollutants and disinfect drinking water. This study summarizes the effectiveness of the electrochemical oxidation technique in inactivating different primary biofilm forming paper mill bacteria as well as sulphide and organic material in pulp and paper mill wastewater in laboratory scale batch experiments. Three different electrodes, borondoped diamond (BDD), mixed metal oxide (MMO) and PbO2, were employed as anodes. The impact on inactivation efficiency of parameters such as current density and initial pH or chloride concentration of synthetic paper machine water was studied. The electrochemical behaviour of the electrodes was investigated by cyclic voltammetry with MMO, BDD and PbO2 electrodes in synthetic paper mill water as also with MMO and stainless steel electrodes with biocides. Some suggestions on the formation of different oxidants and oxidation mechanisms were also presented during the treatment. Aerobic paper mill bacteria species (Deinococcus geothermalis, Pseudoxanthomonas taiwanensis and Meiothermus silvanus) were inactivated effectively (>2 log) at MMO electrodes by current density of 50 mA/cm2 and the time taken three minutes. Increasing current density and initial chloride concentration of paper mill water increased the inactivation rate of Deinococcus geothermalis. The inactivation order of different bacteria species was Meiothermus silvanus > Pseudoxanthomonas taiwanensis > Deinococcus geothermalis. It was observed that inactivation was mainly due to the electrochemically generated chlorine/hypochlorite from chloride present in the water and also residual disinfection by chlorine/hypochlorite occurred. In real paper mill effluent treatment sulphide oxidation was effective with all the different initial concentrations (almost 100% reduction, current density 42.9 mA/cm2) and also anaerobic bacteria inactivation was observed (almost 90% reduction by chloride concentration of 164 mg/L and current density of 42.9 mA/cm2 in five minutes). Organic material removal was not as effective when comparing with other tested techniques, probably due to the relatively low treatment times. Cyclic voltammograms in synthetic paper mill water with stainless steel electrode showed that H2O2 could be degraded to radicals during the cathodic runs. This emphasises strong potential of combined electrochemical treatment with this biocide in bacteria inactivation in paper mill environments.

Käänteisosmoosin esikäsittelymenetelmät

Käänteisosmoosisuodatusta käytetään erityisesti teollisuuden jätevesien loppupuhdistuksessa. Suodatuksen ongelmana on kalvojen likaantuminen ja tukkiutuminen. Tässä työssä on aiempia tutkimuksia hyväksikäyttäen tutkittu käänteisosmoosiin tulevan veden esikäsittelemistä niin, että kalvojen likaantumiselta vältyttäisiin. Menetelmien vertailussa on käytetty erilaisia veden laadusta kertovia parametreja. Ongelmallisimmiksi aineksiksi huomattiin orgaaninen aines ja jotkin veteen liuenneet ionit. Kiintoaineen erottaminen ei ole ollut suuri ongelma, sillä sen saa poistettua tavallisesti käytetyillä rakeissuodatuksella, laskeutuksella, flotaatiolla ja kalvosuodatuksella. Orgaanista ainesta on saatu erotettua erityisesti hapettamalla, aktiivilieteprosessilla ja biologisella aktiivihiilisuodattimella. Mikro- ja ultrasuodatusta käytetään usein juuri ennen käänteisosmoosia poistamaan erityisesti kolloidista materiaalia ja joitain liuenneita ioneja. Flokkien muodostaminen koagulaatiossa ja flokkulaatiossa parantaa lähes kaikkien menetelmien toimivuutta selvästi. Veden puhdistuksessa käytetyt kemikaalit voivat myös liika-annosteltuina liata kalvoja. Vesien pitoisuuksissa eri ainesten osalta on huomattavia eroja, joten puhdistettava vesi on hyvä analysoida etukäteen parhaiden käsittelymenetelmien valitsemiseksi.

Potential utilization ways of recovered chemical products from digestate

The study evaluates the potential application of chemical substances, obtained from biogas plants` by-products. Through the anaerobic digestion process with biogas the large amount of digestate is produced. This digestate mainly consists on the organic matter with the high concentration of nutrients such as nitrogen and phosphorus. During ammonia stripping and phosphorus precipitation the products- ammonia water, ammonium sulfate, ammonium nitrate, ferrous phosphate, aluminum phosphate, calcium phosphate and struvite can be recovered. These chemicals have potential application in different industrial sectors. According to Finnish market and chemicals properties, the most perspective industrial applications were determined. Based on the data, obtained through the literature review and market study, the ammonia water was recognized as a most perspective recovered substances. According to interview provided among Finnish companies, ammonia water is used for flue gas treatment in SNCR technology. This application has a large scale in the framework of Finnish industrial sectors. As well nitrogen with phosphorous can be used as a source of nutrients in the biological wastewater treatment plants of paper mills.

Treatment of Fe-containing Acid Mine Waters in Fixed Bed Adsorption Column with Calcite Side-Stone

The acid mining drainage is considered the most significant environmental pollution problem around the world for the extensive formation acidic leachates containing heavy metals. Adsorption is widely used methods in water treatment due to it easy operation and the availability of a wide variety of commercial adsorbent (low cost). The primary goal of this thesis was to investigate the efficiency of neutralizing agents, CaCO3 and CaSiO3, and metal adsorption materials with unmodified limestone from Company Nordkalk Oy. In addition to this, the side materials of limestone mining were tested for iron adsorption from acidic model solution. This study was executed at Lappeenranta University of Technology, Finland. The work utilised fixed-bed adsorption column as the main equipment and large fluidized column. Atomic absorption spectroscopy (AAS) and x-ray diffraction (XRD) was used to determine ferric removal and the composition of material respectively. The results suggest a high potential for the studied materials to be used a low cost adsorbents in acid mine drainage treatment. From the two studied adsorbents, the FS material was more suitable than the Gotland material. Based on the findings, it is recommended that further studies might include detailed analysis of Gotland materials.

Lämpötilan vaikutus oksaalihapon hapetukseen pulssitetulla koronapurkauksella

Tutkimuksen tarkoituksena oli kartoittaa lämpötilan vaikutusta veden orgaanisten haitta-aineiden hapetuksessa PCD-menetelmällä. Kokeita tehtiin näytteiden eri alkulämpötiloilla. Malliyhdisteenä kokeissa käytettiin oksaalihappoa. Teoriaosuudessa käsiteltiin pulssittaista koronapurkausta ilmiönä. Lisäksi tarkasteltiin, kuinka PCD-menetelmällä muodostuu hapettimia neste-kaasufaasissa. Syntyvistä hapettimista keskityttiin otsoniin ja hydroksyyliradikaaliin. Kokeellisessa osuudessa esiteltiin käytetty PCD-laitteisto. Esittelyn jälkeen siirryttiin hapetuskokeiden kuvaamiseen ja analyysin suorittamiseen titrauksella. Lopuksi koottiin tulokset. Tutkimuksissa prosessin hapetustehon havaittiin heikentyvän lämpötilan noustessa tutkitulla lämpötila-alueella, mikä voi selittyä kaasufaasissa muodostuvan otsonin heikentyvällä liukoisuudella. Tuloksia voidaan pitää viitteellisinä, ja selkeän mallin muodostamiseksi tarvitaan jatkotutkimuksia laajemmalla lämpötila-alueella tarkasti toistettavilla koejärjestelyillä.