Malnutrition in the second year of life and psychosocial care: a case-control study in an urban area of Southeast Brazil

O objetivo do estudo foi identificar e medir a presença de associação entre cuidado psicossocial e desnutrição. Realizou-se estudo caso-controle incluindo 101 crianças desnutridas (peso/idade < percentil 5 do padrão NCHS/OMS), com idades entre 12 e 23 meses, que foram comparadas a 200 controles eutróficos (peso/ idade > percentil 25) em termos de sua exposição a uma série de comportamentos maternos indicadores da qualidade de seu cuidado psicossocial. Criou-se um escore de cuidado psicossocial, variando de 0 a 14, de acordo com o número de comportamentos maternos desejáveis não observados: quanto maior o escore, pior a qualidade do cuidado psicossocial. Mediante análise de regressão logística verificou-se maior risco de desnutrição para as crianças no 2º e 3º tercis do escore de cuidado psicossocial. Esta associação foi modificada pela renda per capita. Após ajustes para possíveis confundidores, nas crianças dos estratos superiores de renda não houve associação entre cuidado psicossocial e desnutrição. Para as crianças com nível mais baixo de renda, pior cuidado psicossocial dobrou o risco de desnutrição (OR = 7,26; IC95%: 2,42-21,82) em relação àquele associado apenas à baixa renda (OR = 3,08; IC95%: 1,28-7,42).

Morphology of the digestive tube of Macuxitermes triceratops and its phylogenetic implications (Isoptera: Termitidae: Nasutitermitinae)

The gross morphology of digestive tube of Macuxitermes triceratops is described and illustrated. The gut of this species is very similar to those of Embiratermes and Ibitermes, and does not show any obvious autopomorphic character. The phylogenetic relations of this genus are discussed based on the available evidence, and it is concluded that it is probably the sister group of Armitermes + Curvitermes + Cryilliotermes.

Dynamic scale theory for characterizing surface morphology of layer-by-layer films of poly(o-methoxyaniline)

The dynamic scale theory and fractal concepts are employed in the characterization of surface morphological properties of layer-by-layer (LBL) films from poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS). The fractal dimensions are found to depend on the procedures to fabricate the POMA/PVS multilayers, particularly with regard to the drying procedures. LBL films obtained via drying in ambient air show a more homogeneous surface, compared to films dried under vacuum or a flow of nitrogen, due to a uniform rearrangement of polymer molecules during solvent evaporation.

Physicochemical properties and morphology of spongolite from Mato Grosso do Sul (Brazil)

The physicochemical properties and morphology of spongolite, a fibrous hollow material from Mato Grosso do Sul State (Brazil) have been studied. The results of thermal analysis, scanning electron microscopy (SEM), X-ray diffraction and NMR spectroscopy indicated that external and internal surfaces of silica spicules are covered by silica gel layers. The water evolved in the range 120-350degreesC is the result of silanol groups condensation to siloxane bonds. Total homogenization of the needles is achieved by heating spongolite over 900degreesC. This mineral may be considered as a natural composite material containing surface-immobilized reactive species. The presence of active silica gel layers opens the possibilities of attaching functional groups to spongolite surface. (C) 2002 Elsevier B.V. B.V. All rights reserved.

Morphology of alumina: a comparison between infrared spectroscopy and X-ray diffractometry

Morphology of three samples of alumina are investigated. Infrared spectra are analysed by use of their morphology through the theory of average dielectric constant. Crystal shape is obtained from X-ray diffraction patterns by reflection intensity ratio. In the case of electron scanning microscopy, shape factor was obtained by an average axial ratio of the particles. Comparison of results show that there is agreement among these techniques and infrared spectra can be used to determine the morphology of alumina particles from 2.7 to 10 mu m, even for heterogeneous samples. (C) 1999 Elsevier B.V. B.V. All rights reserved.

ZOEAL MORPHOLOGY OF PACHYGRAPSUS-GRACILIS (SAUSSURE, 1858) (DECAPODA, GRAPSIDAE) REARED IN THE LABORATORY

The larval development of Pachygrapsus gracilis was studied in the laboratory under conditions of 25-degrees-C temperature and 20, 24, 28, 32 and 34 parts per thousand salinity. The objective of the study was to characterize the plankton phase of life of this species.

Morphology of poly(vinylidene fluoride) and poly(o-metoxyaniline) blends

Blends of poly(o-methoxyaniline) - POMA - and poly(vinylidene fluoride) - PVDF - of various compositions were prepared from organic solvent solutions. Flexible, free-standing and stretchable films were obtained by casting, which were characterized by conductivity measurements, electron microscopy and differential scanning calorimetry. As expected, the blends conductivity increases with increasing contents of the conducting polymer. The onset of the conductivity at low contents of conducting polymer indicates a low percolation threshold for the blends. Despite the presence of the conductive host, the blends displayed the crystalline spherulitic morphology and the beta-phase characteristic of pure PVDF. This morphology appears to be destroyed, however, if the film is stretched by zone-drawing.

Effect of thermal treatment temperature on the crystallinity and morphology of LiTaO3 thin films prepared from polymeric precursor method

Lithium tantalate thin films (LiTaO3) with (50:50) stoichiometry were prepared by spin coating method using a polymeric organic solution. The films were deposited on silicon (100) substrates with 4 layers. The substrates were previously cleaned and then the solution of lithium tantalate was deposited by adjusting the speed at 5000 rpm. The thin films deposited were thermally treated from 350 to 600degreesC for 3 hours in order to study the influence of the thermal treatment temperature on the crystallinity, microstructure, grain size and roughness of the final film. X-ray diffraction (XRD) results showed that the films are polycrystalline and secondary phases free. The thickness of films was observed by scanning electron microscopy (SEM). The atomic force microscopy (AFM) studies showed that the grain size and roughness are strongly influenced by thermal treatment.

Influence of solution treatment on the adsorption and morphology of poly(o-methoxyaniline) layer-by-layer films

It is shown that the adsorption and morphological properties of layer-by-layer films of poly(o-methoxyaniline) (POMA) alternated with poly(vinyl sulfonic acid) (PVS) are affected dramatically by different treatments of the POMA solutions employed to prepare the films. Whereas the dimension of the globular structures seen by atomic force microscopy increases non monotonically during film growth in parent POMA solution, owing to a competition of adsorption/desorption processes, it changes monotonically for the fractionated POMA. The roughness of the latter films depends on the concentration of the solution and saturates at a given size of the scan window. This allowed us to apply scaling laws that indicated a self-affine mechanism for adsorption of the treated POMA.

Morphology of the head and frontal gland in neotropical Nasutitermitinae (Isoptera, Termitidae)

The Nasutitermitinae species are the most diverse and derived of the Isoptera. The phylogeny of this subfamily has been a point of divergence. In an attempt to solve this problem, we propose the use of the morphological features of the head, frontal gland and its associated muscles as phylogenetic characters in some Nasutitermitinae genera. Results found about the head and frontal gland morphology are discussed and suggested to be used in future systematic studies of termites.

Effect of preannealing on the morphology of LiTaO3 thin films prepared from the polymeric precursor method

Lithium tantalate (LiTaO3) thin films with 50:50 stoichiometry were deposited on silicon (100) substrates with two layers by the spin coating method using a polymeric organic solution. In order to study the influence of preannealing on the crystallinity, microstructure, grain size and roughness of the final film, two annealing procedures, slow preannealing and fast preannealing, were used. X-ray diffraction (XRD) results showed that LiTaO3 thin films are polycrystalline. It was observed by scanning electron microscopy (SEM) that the thin film, which had been thermally treated using slow preannealing, was characterized by a dense and homogeneous surface. The atomic force microscopy (AFM) studies showed that the roughness is strongly influenced by preannealing temperature. (C) 2003 Elsevier B.V. All rights reserved.