Les Plus Anciens Mastodontes Tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la Tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet genetically separated beyond fertile cross-breeding, i.e. beyond species' level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus'ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but significant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

Notes sur la géologie et la paleontology du Miocène de Lisbonne; (XX) les plus anciens mastodontes tetralophodontes (Langhien inférieur Vb), évolution et remarques sur la tetralophodontie

This study deals with mastodont teeth found near Lisbon in Lower Langhian (lower Middle Miocene) fluviatile, feldspathic sands (Vb division). Conclusions are as follows: 1. Tetralophodont molars (even if at a still primitive stade of the tetralophodont condition) do exist at least since lower Langhian times, and not only since late Middle Miocene as was previously known. 2. Tri- and tetralophodont structures may (and indeed do) coexist in the same individual: such examples do not correspond to transitional forms, but instead to a mosaic of juxtaposed characters (however this does not mean there are no transitional forms in other instances). 3. So these structures coexisted in a population not yet geneticaliy separated beyond fertile cross-breeding, i.e. beyond species'level. 4. Origin of the tetralophodont molar was due to some mutation (s). but without crossing species, limits and even more genus' ones. 5. At this times probably soon after the first appearance of tetralophodont mutants, animals with such characters were a small but signifiant minority among the population (17% if account is taken on D4's: only 2% after M2's). 6. There was not then any direct and clear correlation between number of lophs (transversal crests) and tooth size, even if the increase of such number goes along with length's increase. 7. Dimensions (length in special) in tetralophodont teeth tend to exceed those in «normal» trilophodont teeth, this being particularly clear in D4, even if there is no clear distinction: the situation is quite the same, maybe less marked, with the M2. 8. According to the preceding conclusions there are no reasons to segregate different taxa among such mastodont population on the grounds of the presence in D4, M1 and M2 of 3 or 4 crests (this character being regarded as diagnostic of the genus Tetralophodon). 9. On the contrary, if any natural (in biological sense) classification is disregarded and a morphological parataxonomy is adopted there should be considered both Gomphotherium angustidens and Tetralophodon sp.: however this is absolutely not our opinion.

The effect of fractional order in variable structure control

This paper studies fractional variable structure controllers. Two cases are considered namely, the sliding reference model and the control action, that are generalized from integer into fractional orders. The test bed consists in a mechanical manipulator and the effect of the fractional approach upon the system performance is evaluated. The results show that fractional dynamics, both in the switching surface and the control law are important design algorithms in variable structure controllers.

Effects of team task structure on team climate for innovation and team outcomes

In this cross-sectional study we analyzed, whether team climate for innovation mediates the relationship between team task structure and innovative behavior, job satisfaction, affective organizational commitment, and work stress. 310 employees in 20 work teams of an automotive company participated in this study. 10 teams had been changed from a restrictive to a more self-regulating team model by providing task variety, autonomy, team-specific goals, and feedback in order to increase team effectiveness. Data support the supposed causal chain, although only with respect to team innovative behavior all required effects were statistically significant. Longitudinal designs and larger samples are needed to prove the assumed causal relationships, but results indicate that implementing self-regulating teams might be an effective strategy for improving innovative behavior and thus team and company effectiveness.

Management Structure and Work Team Processes; Responsibilities and Responsiveness

This paper explores the management structure of the team-based organization. First it provides a theoretical model of structures and processes of work teams. The structure determines the team’s responsibilities in terms of authority and expertise about specific regulation tasks. The responsiveness of teams to these responsibilities are the processes of teamwork, in terms of three dimensions, indicating to what extent teams indeed use the space provided to them. The research question that this paper addresses is to what extent the position of responsibilities in the team-based organization affect team responsiveness. This is done by two hypotheses. First, the effect of the so-called proximity of regulation tasks is tested. It is expected that the responsibility for tasks positioned higher in the organization (i.e. further from the team) generally has a negative effect on team responsiveness, whereas tasks positioned lower in the organization (i.e. closer to the team) will have a positive effect on the way in which teams respond. Second, the relationship between the number of tasks for which the team is responsible with team responsiveness is tested. Theory suggests that teams being responsible for a larger number of tasks perform better, i.e. show higher responsiveness. These hypotheses are tested by a study of 109 production teams in the automotive industry. The results show that, as the theory predicts, increasing numbers of responsibilities have positive effects on team responsiveness. However, the delegation of expertise to teams seems to be the most important predictor of responsiveness. Also, not all regulation tasks show to have effects on team responsiveness. Most tasks do not show to have any significant effect at all. A number of tasks affects team responsiveness positively, when their responsibility is positioned lower in the organization, but also a number of tasks affects team responsiveness positively when located higher in the organization, i.e. further from the teams in the production. The results indicate that more attention can be paid to the distribution of responsibilities, in particular expertise, to teams. Indeed delegating more expertise improve team responsiveness, however some tasks might be located better at higher organizational levels, indicating that there are limitations to what responsibilities teams can handle.

Design of a laminated composite multi-cel structure subjected to torsion

Laminate composite multi-cell structures have to support both axial and shear stresses when sustaining variable twist. Thus the properties and design of the laminate may not be the most adequate at all cross-sections to support the torsion imposed on the cells. In this work, the effect of some material and geometric parameters on the optimal mechanical behaviour of a multi-cell composite laminate structure is studied when torsion is present. A particle swarm optimization technique is used to maximize the multi-cell structure torsion constant that can be used to obtain the angle of twist of the composite laminate profile.

Gender differences in the association between tooth loss and obesity among older adults in Brazil

OBJECTIVE To analyze if differences according to gender exists in the association between tooth loss and obesity among older adults.METHODS We analyzed data on 1,704 older adults (60 years and over) from the baseline of a prospective cohort study conducted in Florianopolis, SC, Southern Brazil. Multivariable logistic regression models were used to assess the association between tooth loss and general and central obesity after adjustment for confounders (age, gender, skin color, educational attainment, income, smoking, physical activity, use of dentures, hypertension, and diabetes). Linear regressions were also assessed with body mass index and waist circumference as continuous outcomes. Interaction between gender and tooth loss was further assessed.RESULTS Overall mean body mass index was 28.0 kg/m2. Mean waist circumference was 96.8 cm for males and 92.6 cm for females. Increasing tooth loss was positively associated with increased body mass index and waist circumference after adjustment for confounders. Edentates had 1.4 (95%CI 1.1;1.9) times higher odds of being centrally obese than individuals with a higher number of teeth; however, the association lost significance after adjustment for confounders. In comparison with edentate males, edentate females presented a twofold higher adjusted prevalence of general and central obesity. In the joint effects model, edentate females had a 3.8 (95%CI 2.2;6.6) times higher odds to be centrally obese in comparison with males with more than 10 teeth present in both the arches. Similarly, females with less than 10 teeth in at least one arch had a 2.7 (95%CI 1.6;4.4) times higher odds ratio of having central obesity in comparison with males with more than 10 teeth present in both the arches.CONCLUSIONS Central obesity was more prevalent than general obesity among the older adults. We did not observe any association between general obesity and tooth loss. The association between central obesity and tooth loss depends on gender – females with tooth loss had greater probability of being obese.

Mu-Chlorido-Bridged Dimanganese(II) complexes of the schiff base derived from [2+2] condensation of 2,6-diformyl-4-methylphenol and 1,3-bis(3-aminopropyl)tetramethyldisloxane: structure, magnetismo, electrochemical behaviour, and catalytic oxidation of secondary alcohols

The reaction of 2,6-diformyl-4-methylphenol with 1,3-bis(3-aminopropyl)tetramethyldisiloxane in the presence of MnCl2 in a 1:1:2 molar ratio in methanol afforded a dinuclear -chlorido-bridged manganese(II) complex of the macrocyclic [2+2] condensation product (H2L), namely, [Mn2Cl2(H2L)(HL)]Cl center dot 3H(2)O (1). The latter afforded a new compound, namely, [Mn2Cl2(H2L)(2)][MnCl4]center dot 4CH(3)CN center dot 0.5CHCl(3 center dot)0.4H(2)O (2), after recrystallisation from 1:1 CHCl3/CH3CN. The co-existence of the free and complexed azomethine groups, phenolato donors, mu-chlorido bridges, and the disiloxane unit were well evidenced by ESI mass spectrometry and FTIR spectroscopy and confirmed by X-ray crystallography. The magnetic measurements revealed an antiferromagnetic interaction between the two high-spin (S = 5/2, g = 2) manganese(II) ions through the mu-chlorido bridging ligands. The electrochemical behaviour of 1 and 2 has been studied, and details of their redox properties are reported. Both compounds act as catalysts or catalyst precursors in the solvent-free low-power microwave-assisted oxidation of selected secondary alcohols, for example, 1-phenylethanol, cyclohexanol, 2- and 3-octanol, to the corresponding ketones in the absence of solvent. The highest yield of 72% was achieved for 1-phenylethanol by using a maximum of 1% molar ratio of catalyst relative to substrate.

µ-Chlorido-bridged dimanganese(II) complexes of the schiff base derived from [2+2] condensation of 2,6-diformyl-4-methylphenol and 1,3-bis(3-aminopropyl)tetramethyldisiloxane: structure, magnetismo, electrochemical behaviour, and catalytic oxidation of secondary alcohols

The reaction of 2,6-diformyl-4-methylphenol with 1,3-bis(3-aminopropyl)tetramethyldisiloxane in the presence of MnCl2 in a 1:1:2 molar ratio in methanol afforded a dinuclear -chlorido-bridged manganese(II) complex of the macrocyclic [2+2] condensation product (H2L), namely, [Mn2Cl2(H2L)(HL)]Cl center dot 3H(2)O (1). The latter afforded a new compound, namely, [Mn2Cl2(H2L)(2)][MnCl4]center dot 4CH(3)CN center dot 0.5CHCl(3 center dot)0.4H(2)O (2), after recrystallisation from 1:1 CHCl3/CH3CN. The co-existence of the free and complexed azomethine groups, phenolato donors, mu-chlorido bridges, and the disiloxane unit were well evidenced by ESI mass spectrometry and FTIR spectroscopy and confirmed by X-ray crystallography. The magnetic measurements revealed an antiferromagnetic interaction between the two high-spin (S = 5/2, g = 2) manganese(II) ions through the mu-chlorido bridging ligands. The electrochemical behaviour of 1 and 2 has been studied, and details of their redox properties are reported. Both compounds act as catalysts or catalyst precursors in the solvent-free low-power microwave-assisted oxidation of selected secondary alcohols, for example, 1-phenylethanol, cyclohexanol, 2- and 3-octanol, to the corresponding ketones in the absence of solvent. The highest yield of 72% was achieved for 1-phenylethanol by using a maximum of 1% molar ratio of catalyst relative to substrate.

Internal structure of the nanogratings generated inside bulk fused sílica by ultrafast laser direct writing

The aim of the present work was to characterize the internal structure of nanogratings generated inside bulk fused silica by ultrafast laser processing and to study the influence of diluted hydrofluoric acid etching on their structure. The nanogratings were inscribed at a depth of 100 mu m within fused silica wafers by a direct writing method, using 1030 nm radiation wavelength and the following processing parameters: E = 5 mu J, tau = 560 fs, f = 10 kHz, and v = 100 mu m/s. The results achieved show that the laser-affected regions are elongated ellipsoids with a typical major diameter of about 30 mu m and a minor diameter of about 6 mu m. The nanogratings within these regions are composed of alternating nanoplanes of damaged and undamaged material, with an average periodicity of 351 +/- 21 nm. The damaged nanoplanes contain nanopores randomly dispersed in a material containing a large density of defects. These nanopores present a roughly bimodal size distribution with average dimensions for each class of pores 65 +/- 20 x 16 +/- 8 x 69 +/- 16 nm(3) and 367 +/- 239 x 16 +/- 8 x 360 +/- 194 nm(3), respectively. The number and size of the nanopores increases drastically when an hydrofluoric acid treatment is performed, leading to the coalescence of these voids into large planar discontinuities parallel to the nanoplanes. The preferential etching of the damaged material by the hydrofluoric acid solution, which is responsible for the pores growth and coalescence, confirms its high defect density. (C) 2014 AIP Publishing LLC.

Molecular mobility, composition and structure analysis in glycerol plasticised chitosan films

This study was developed with the purpose to investigate the effect of polysaccharide/plasticiser concentration on the microstructure and molecular dynamics of polymeric film systems, using transmission electron microscope imaging (TEM) and nuclear magnetic resonance (NMR) techniques. Experiments were carried out in chitosan/glycerol films prepared with solutions of different composition. The films obtained after drying and equilibration were characterised in terms of composition, thickness and water activity. Results show that glycerol quantities used in film forming solutions were responsible for films composition; while polymer/total plasticiser ratio in the solution determined the thickness (and thus structure) of the films. These results were confirmed by TEM. NMR allowed understanding the films molecular rearrangement. Two different behaviours for the two components analysed, water and glycerol were observed: the first is predominantly moving free in the matrix, while glycerol is mainly bounded to the chitosan chain. (C) 2013 Elsevier Ltd. All rights reserved.

Algebraic structure for the crossing of balanced and stair nested designs

Stair nesting allows us to work with fewer observations than the most usual form of nesting, the balanced nesting. In the case of stair nesting the amount of information for the different factors is more evenly distributed. This new design leads to greater economy, because we can work with fewer observations. In this work we present the algebraic structure of the cross of balanced nested and stair nested designs, using binary operations on commutative Jordan algebras. This new cross requires fewer observations than the usual cross balanced nested designs and it is easy to carry out inference.

Constrains on the structure of Maio Island (Cape Verde) by a three-dimensional gravity model: Imaging partially exhumed magma chambers

We propose a 3-D gravity model for the volcanic structure of the island of Maio (Cape Verde archipelago) with the objective of solving some open questions concerning the geometry and depth of the intrusive Central Igneous Complex. A gravity survey was made covering almost the entire surface of the island. The gravity data was inverted through a non-linear 3-D approach which provided a model constructed in a random growth process. The residual Bouguer gravity field shows a single positive anomaly presenting an elliptic shape with a NWSE trending long axis. This Bouguer gravity anomaly is slightly off-centred with the island but its outline is concordant with the surface exposure of the Central Igneous Complex. The gravimetric modelling shows a high-density volume whose centre of mass is about 4500 m deep. With increasing depth, and despite the restricted gravimetric resolution, the horizontal sections of the model suggest the presence of two distinct bodies, whose relative position accounts for the elongated shape of the high positive Bouguer gravity anomaly. These bodies are interpreted as magma chambers whose coeval volcanic counterparts are no longer preserved. The orientation defined by the two bodies is similar to that of other structures known in the southern group of the Cape Verde islands, thus suggesting a possible structural control constraining the location of the plutonic intrusions.

Deep structure of crust and mantle beneath Iberia and Western Mediterranean from P and S Receiver functions and SKS Waveforms

We have conducted a P and S receiver functions [PRFs and SRFs] analysis for 19 seismic stations on the Iberia and western Mediterranean. In the transition zone [TZ] the PRFs analysis reveals a band [from Gibraltar to Balearic] increased by 10-20 km relative to the standard 250 km. The TZ thickness variations are strongly correlated with the P660s times in PRFs. We interpret the variable depth of the 660-km discontinuity as an effect of subduction. Over the anomalous TZ we found a reduced velocity zone in the upper mantle. Joint inversion of PRFs and SRFs reveals a subcrustal high S velocity lid and an underlying LVZ. A reduction of the S velocity in the LVZ is less than 10%. The Gutenberg discontinuity is located at 65±5 km, but in several models sampling the Mediterranean, the lid is missing or its thickness is reduced to ~30 km. In the Gibraltar and North Africa this boundary is located at ~100 km. The lid Vp/Vs beneath Betics is reduced relative to the standard 1.8. Another evidence of the Vp/Vs anomaly is provided by S410p phase late arrivals in the SRFs. The azimuthal anisotropy analysis with a new technology was conducted at 5 stations and at 2 groups of stations. The fast direction in the uppermost mantle layer is ~90º in Iberian Massif. In Balearic is in the azimuth of ~120º. At a depth of ~60 km the direction becomes 90º. Anisotropy in the upper layer can be interpreted as frozen, whereas anisotropy in the lower layer is active, corresponding to the present-day or recent flow. The effect of the asthenosphere in the SKS splitting is much larger than the effect of the subcrustal lithosphere.

Identification of mating type genes in the bipolar basidiomycetous yeast rhodosporidium toruloides: first insight into the MAT Locus structure of the sporidiobolales

Eukaryotic Cell, Vol.7, Nº6