Confusing the extragalactic neutrino flux limit with a neutrino propagation limit

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Cr3C2-NiCr and WC-Ni thermal spray coatings as alternatives to hard chromium for erosion-corrosion resistance

Cr3C2-NiCr and WC-Ni coatings are widely used for wear applications at high and room temperature, respectively. Due to the high corrosion resistance of NiCr binder, Cr3C2-NiCr coatings are also used in corrosive environments. The application of WC-Ni coatings in corrosive media is 14 not recommended due to the poor corrosion resistance of the (pure Ni) metallic matrix. It is well known that the addition of Cr to the metallic binder improves the corrosion properties. Erosion-corrosion performance of thermal spray coatings is widely influenced by ceramic phase composition, the size of ceramic particles and also the composition of the metallic binder. In the present work, two types of HVOF thermal spray coatings (Cr3C2-NiCr and WC-Ni) obtained with different spray conditions were studied and compared with conventional micro-cracked hard chromium coatings. Both as-sprayed and polished samples were tested under two erosion-corrosion conditions with different erosivity. Tungsten carbide coatings showed better performance under the most erosive condition, while chromium carbide coatings were superior under less erosive conditions. Some of the tungsten carbide coatings and hard chromium showed similar erosion-corrosion behaviour under more and less erosive conditions. The erosion-corrosion and electrochemical results showed that surface polishing improved the erosion-corrosion properties of the thermally sprayed coatings. The corrosion behaviour of the different coatings has been compared using Electrochemical Impedance Spectroscopy (EIS) and polarization curves. Total material loss due to erosion-corrosion was determined by weight loss measurements. An estimation of the corrosion contribution to the total weight loss was also given. (c) 2007 Elsevier B.V. All rights reserved.

Comportamento de cultivares de pepino (Cucumis sativus L.) em duas épocas de semeadura

O desenvolvimento e a produção de frutos para consumo in natura dos cultivares de pepino 'Marketer IAC-2205', 'Palomar IAC-3050', 'Santee IAC-2441', 'Verde Paulistano IAC-1386' e 'Aodai 1-4321' foram estudados em duas épocas de semeadura, 5 de maio e 5 de dezembro, em Campinas, SP. Para todos os cultivares, as plantas semeadas em dezembro cresceram mais e desenvolveram-se com maior rapidez que as plantas semeadas em maio; entretanto, as produções das plantas semeadas em maio foram maiores e a qualidade de seus frutos foi superior. Tanto para as plantas semeadas em maio como para as semeadas em dezembro, 'Santee' apresentou produções baixas e frutos de má qualidade. 'Aodai' foi o cultivar mais produtivo e seus frutos foram os de melhor qualidade. As produções dos demais cultivares foram equivalentes. 'Verde Paulistano' apresentou a produção mais tardia. 0 comportamento de 'Marketer' foi pouco afetado pelas variações ambientais. As maiores produções de todos os cultivares, nas duas é poças, foram obtidas entre a terceira e a penúltima colheitas. Foram encontradas correlações positivas entre a produção de cada colheita e a produção total, entre a produção total e a produção comerciável, entre o número de frutos e seu peso, entre produção e a altura da planta e entre produção e número de ramos laterais da planta. A relação entre produções comerciável e total e o peso médio dos frutos diminuíram no final do ciclo das plantas.

Espessura da lâmina de cisalhamento na avaliação instrumental da textura da carne

A padronização da textura é um dos principais problemas relacionados à qualidade da carne bovina. Por isso, a avaliação objetiva da maciez, por métodos mecânicos, vem sendo estudada há muitos anos. Para que a avaliação instrumental da textura seja uma ferramenta efetiva nos estudos envolvendo a maciez da carne, é necessário minimizar as causas de variação envolvidas na análise. Atualmente, a força de cisalhamento Warner-Bratzler é o método mais amplamente empregado para essa finalidade. O protocolo padrão dessa técnica analítica preconiza a utilização de uma lâmina de cisalhamento de 1,016mm de espessura. Neste trabalho, foram comparados dados de textura de carne bovina obtidos com a lâmina de cisalhamento padrão Warner-Bratzler, de 1,016mm de espessura, e uma lâmina mais grossa, de 3,05mm de espessura. Após o abate, amostras de músculo Longissimus dorsi, semelhantes em relação aos teores de umidade, lipídeos e proteínas, foram submetidas a duas diferentes temperaturas de resfriamento, atingindo diferentes velocidades de queda de temperatura e, consequentemente, diferentes graus de contração do tecido muscular, o que foi confirmado pela determinação do comprimento dos sarcômeros. Os resultados demonstraram uma maior sensibilidade da lâmina padrão Warner-Bratzler na detecção de variações da textura da carne, em função da velocidade de resfriamento.

Câncer de pele: uso de medidas preventivas e perfil demográfico de um grupo de risco na cidade de Botucatu

Buscou-se junto a um grupo de risco para o câncer de pele seu o perfil demográfico e analisou-se o uso de medidas preventivas utilizadas pelos mesmos e pela empresa. Estudo quantitativo com 33 carteiros da Empresa Brasileira de Correios e Telégrafos em Botucatu, Brasil. Dados obtidos por meio de um formulário que investigava perfil demográfico, tempo de trabalho na empresa, horário de exposição ao sol, história de queimaduras solares, história de câncer na família e formas de prevenção do câncer de pele utilizadas. Na análise dos dados, utilizou-se estatística descritiva segundo Teste Exato de Fisher ao nível de 5% de probabilidade. Os resultados mostraram que a faixa etária predominante foi de 26 a 30 e de 31 a 35 anos, correspondendo a 42,42% da amostra, a cor da pele foi à branca com 93,94% e 81,82% trabalham há mais de cinco anos na empresa. O hábito de usar filtro solar foi encontrado em 63,63% dos entrevistados, sendo a não aderência a este justificada em 75% por falta de costume. em relação aos equipamentos protetores do sol a empresa fornece para 100% deles. Os achados permitem a caracterização da população estudada, identificada como de risco para o câncer de pele, propiciando a profilaxia através de ações em saúde, visando à sensibilização dos mesmos para com as medidas preventivas que podem ser adotadas.

Temperature dependence of photoinduced birefringence in polystyrene doped with Disperse Red-1

A theoretical model on the basis of the free-volume concept is presented explaining the temperature dependence of photoinduced birefringence in polystyrene films that contain Disperse Red-1. Birefringence increases with temperature up to 180 K as the free volume for isomerization increases, and then decreases as thermally activated processes dominate. The fast process of birefringence decay has a time constant that increases with temperature at low temperatures, due to the change kin photoisomerization.

Butanolides as a common feature of Iryanthera lancifolia and Virola surinamensis

A comparative phytochemical study between pericarps of Iryanthera lancifolia and Virola surinamensis showed that the first one contains a new pair of epimeric 2-alkenyl-gamma-lactones, besides an aryltetralinic lignan and one tocotrienol, while the second species contains the lignans, galgravin and veraguensin, seven juruenolides: juruenolides C, D, F, G and epi-juruenolides D, F, G, together with three pairs of epimeric aliphatic 2-alkenyl-gamma-lactones. Juruenolide F, epi-juruenolides D, F, G and the 2-alkenyl-gamma-lactones are new natural compounds. (C) 1998 Elsevier B.V. Ltd. All rights reserved.

Combination of nickel and titanium complexes containing nitrogen ligands as catalyst for polyethylene reactor blending

Ethylene was polymerized using a combination of Ni(diimine)Cl-2 (1) (diimine = 1,4-bis(2,6-di-isopropylphenyl)-acenaphthenediimine) and {Tp(Ms)*} TiCl3 (2) (Tp(Ms)* = hydridobis(3-mesitylpyrazol-1-yl)(5-mesityl-pyrazol-1-yl)) compounds in the presence of methyl-aluminoxane (MAO) at 30 degrees C. The productivity reaches a maximum at X-Ni = 0.75 (1400 kg of PE/mol[M] . h), and the produced polyethylene (PE) showed maximal melt flow index (0.13 g/10 min) and minimal intrinsic viscosity (2.24 dL/g) compared to polyethylenes obtained with different values of nickel loading fractions (X-Ni). Productivity intrinsic viscosity data, as well as melt flow index measurements markedly depend upon the content of the late transition metal, thus suggesting a synergic effect between nickel and titanium catalysts.

Pion-distribution amplitude within the instanton model

The leading-twist pion-distribution amplitude is obtained at a low normalization scale of order ρc (inverse average size of an instanton). Pion dynamics, consistent with gauge invariance and low-energy theorems, is considered within the instanton vacuum model. The results are QCD-evolved to higher momentum-transfer values and are in agreement with recent data from CLEO on the pion transition form factor. It is also shown that some previous calculations violate the axial Ward-Takahashi identity. © 2001 MAIK Nauka/Interperiodica.

Diagnostic agreement of conventional and inverted scanned panoramic radiographs in the detection of the mandibular canal and the mental foramen.

The aim of this study was to evaluate the diagnostic agreement of conventional panoramic radiographs and their inverted scanned images in the detection of the mandibular canal and mental foramen. A total of 77 panoramic radiographs obtained from the files of totally edentulous patients were used. Digitization was done by means of a scanner with brightness and contrast adjustment, as well as image inversion. The extension of mandibular canal was divided into anterior, middle, and posterior regions, and the presence of a radiopaque line that characterized the mandibular canal was classified according to a 5-point confidence scale. The mental foramen was classified in 4 types: continuous, separated, diffuse, and unidentified. Both conventional and inverted scanned panoramic radiographs were evaluated by 3 calibrated implantologists at 2 distinct moments with a minimum interval of 10 days between them. Intraexaminer agreement was evaluated by Kappa statistics by point and by 95% confidence interval. Because the intraexaminer level of agreement was low, interexaminer agreements could not be carried out. The results showed a substantial (in 2 situations), moderate (in 16 situations), and fair (in 18 situations) intraexaminer agreement for mandibular canal and a substantial (in 1 situation), fair (in 1 situation), and moderate (in 10 situations) intraeaminer agreement for mental foramen. There were no statistically significant differences in most instances. In conclusion, the diagnostic agreement of conventional and inverted scanned panoramic radiographs for detection of mandibular canal and mental foramen was low.

Feeding and condition factor of characidiin fish in Ribeirão Grande system, Southeastern Brazil

Feeding, seasonal changes in visceral fat and condition factor were compared in two species of characidiin fishes, Characidium lauroi and C. alipioi from Ribeirão Grande system, southeastern Brazil. Five streams of Ribeirão Grande system were sampled (22° 47' 08 S, 45° 28' 17W). The samples were taken four times per site, from July, 2001 to April, 2002: winter (July 2001), spring (October 2001), summer (February 2002) and autumn (April 2002). Quantitative collections were made with an electro-fishing device powered by a generator with maximum capacity of 1,500 V and 8.7 A of 60 Hz alternating current. Ephemeroptera nymphs, Diptera larvae (Chironomidae, Simuliidae), Plecoptera nymphs, Trichoptera larvae (Hydroptilidae, Psychoyiidae), terrestrial insects (Coleoptera, Isoptera, Hemiptera [Heteroptera, Homoptera]), Megaloptera larvae (Corydalidae), Arachnida, Ostracoda and vegetal debris were found in both species' diets. Visceral fat declined in February, coinciding with the decline of the condition factor in both species. The increased feeding from summer to fall provides fat accumulation. During subsequent seasons, fish may utilize visceral fat reserves for maintenance and reproduction.

A survey of radiographic measurement estimation in assessment of dental implant length.

The aim of this study is to survey radiographic measurement estimation in the assessment of dental implant length according to dentists' confidence. A 19-point questionnaire with closed-ended questions was used by two graduate students to interview 69 dentists during a dental implant meeting. Included were 12 questions related to over- and underestimation in three radiographic modalities: panoramic (P), conventional tomography (T), and computerized tomography (CT). The database was analyzed by Epi-Info 6.04 software and the values from two radiographic modalities, P and T, were compared using a chi2 test. The results showed that 38.24% of the dentists' confidence was in the overestimation of measurements in P, 30.56% in T, and 0% in CT. On the other hand, considering the underestimated measurements, the percentages were 47.06% in P, 33.33% in T, and 1.92% in CT. The frequency of under- and overestimation were statistically significant (chi2 = 6.32; P = .0425) between P and T. CT was the radiographic modality with higher measurement precision according to dentists' confidence. In conclusion, the interviewed dentists felt that CT was the best radiographic modality when considering the measurement estimation precision in preoperative dental implant assessment.

Avoiding leukocyte contamination and early platelet activation in platelet-rich plasma.

The objective of this study was to describe a new platelet-rich plasma (PRP) protocol with a reduced concentration of leukocytes and intact platelets. We collected 8 mL of venous blood (VB) from marginal ear veins of 10 male New Zealand white rabbits in acid dextrose citrate Vacutainer tubes. Tubes were centrifuged at 302g for 10 minutes. All plasma was collected in plastic tubes to avoid buffy-coat contamination and centrifuged at 2862g for 5 minutes. A 10% calcium chloride activator (10 PRP:2 CaCl2) was added to the lower third of this plasma (PRP), and the PRP gel was obtained. Mean platelet count was 317.7 x 10(3) +/- 39.9/microL in VB and 1344.9 x 10(3) +/- 347.5/microL in PRP. Leukocyte counts were 3.96 x 10(3) +/- 2.01/microL and 0.46 x 10(3) +/- 0.45/microL in VB and PRP, respectively. Mean platelet enrichment was 327.4 +/- 97.8%. All differences were statistically significant (P > .05). This protocol is practical and reproducible, resulting in a high concentration of intact platelets to help tissue repair and low levels of leukocytes.

A new antifungal phenolic glycoside derivative and iridoids and lignans from Alibertia sessilis (Vell.) K. Schum. (Rubiaceae)

A new antifungal phenolic glycoside, 3,4,5-trimethoxyphenyl-1-O-β-D- (5-O-syringoyl)-apiofuranosyl-(1→6)-β-D-glucopyranoside (1), together with four known iridoids, geniposidic acid (2), geniposide (3), 6α-hydroxygeniposide (4) and 6β-hydroxygeniposide (5); two lignans, (+)-lyoniresinol-3α-O-β-D-glucopyranoside (6), (-)-lyoniresinol- 3α-O-β-D-glucopyranoside (7); and two phenolic acids, chlorogenic (8) and salicylic acids (9) and D-manitol (10), were isolated from the ethanolic extract of the stems of Alibertia sessilis. Structures of 1 and of the known compounds were determined by spectroscopic analysis. All compounds isolated were evaluated for their antifungal activities against two phytopathogenic fungi strains Cladosporium cladosporioides and C. sphaerospermum by direct bioautography. ©2007 Sociedade Brasileira de Química.