Approaches to the synthesis of novel photoactive side chain liquid crystalline polymers containing analogues of the cinnamate ester group

A series of chain liquid crystalline copolymers of 4-cyanophenyl 4′-(6-methacryloyloxyhexyloxy)benzoate and 2-methacryloyloxyethyl β-(1-naphthyl)-propenoate were prepared by free radical polymerization. The corresponding polyacrylates could not be prepared in the same way and an alternative method was used for their preparation involving the synthesis of copolymers of the mesogenic monomer and 2-hydroxyethyl acrylate followed by treatment of the resulting polymers with β-(1-naphthyl)propenoyl chloride. The materials are of interest as photoactive liquid crystalline polymers. The effect of introducing a bulky nonmesogenic group into a liquid crystalline copolymer generally lowers the clearing temperature and raises Tg but also gives rise to contrasting phase behaviour in these two series of polymers. Polymethacrylates which show mesomorphism have sharp transitions and continue to exhibit a highly ordered smectic phase over the bulk of their liquid crystal range. Polyacrylates, on the other hand, exhibit a weakening and broadening-out of their thermal transitions consistent with a lowering of order. These results emphasize the effect of the polymer backbone on phase behaviour.

Towards the total synthesis of mycaperoxide B: probing biosynthetic rationale

Studies towards the biomimetic synthesis of mycaperoxide B (1) are described. We have established the synthesis of four diastereoisomers of mycaperoxide B methyl ester (1a) by employing a Michael addition across an α,β-unsaturated ester precursor 2 as the key step. This result strongly suggestsstereocontrol in the addition of the hydroperoxide functionality to the E double bond and discloses the importance of choosing the correct geometry of the α,β-unsaturated double bond when attempting to synthesise mycaperoxide B. Four diastereoisomeric tetrahydrofurans derived from an intramolecular rearrangement of the 1,2-dioxolane enolate 12 were also isolated and characterised.

Synthesis of 3 '-S-phosphorothiolate oligonucleotides for their potential use in RNA interference

The potency of RNA interference (RNAi) undoubtedly can be improved through chemical modifications to the small interfering RNAs (siRNA). By incorporation of the 3′-S-phosphorothiolate modification into strands of RNA, it is hoped that specific regions of a siRNA duplex can be stabilised to enhance the target binding affinity of a selected antisense strand into the activated RNA-induced silencing complex (RISC*). Oligonucleotides composed entirely of this modification are desirable so unconventional 5′ → 3′ synthesis is investigated, with initial solution-phase testing proving successful. The phosphoroamidite monomer required for solid-phase synthesis has also been produced.

Emotional well-being and adjustment to vision loss in later life: a meta-synthesis of qualitative studies.

Purpose: To review perceived emotional well-being in older people with visual impairment and perceived factors that inhibit/facilitate psychosocial adjustment to vision loss. Method: The databases of MEDLINE, EMBASE, PsycINFO and CINAHL were searched for studies published from January 1980 to December 2010, which recruited older people with irreversible vision loss, and used qualitative methods for both data collection and analysis. Results sections of the papers were synthesised using a thematic-style analysis to identify the emergent and dominant themes. Results: Seventeen qualitative papers were included in the review, and five main themes emerged from the synthesis: 1) the trauma of an ophthalmic diagnosis, 2) impact of vision loss on daily life, 3) negative impact of visual impairment on psychosocial well-being, 4) factors that inhibit social well-being, and 5) factors that facilitate psychological well-being. We found the response shift model useful for explaining our synthesis. Conclusions: Acquired visual impairment can have a significant impact on older people's well-being and make psychosocial adjustment to the condition a major challenge. Acceptance of the condition and a positive attitude facilitate successful psychosocial adjustment to vision loss as well as social support from family, friends and peers who have successfully adjusted to the condition. [Box: see text].

Synthesis of beaded poly(vinyl ether) solid supports with unique solvent compatibility

Poly(vinyl ether) gels SLURPS (Superior Liquid Uptake Resin for Polymer-supported synthesis) with low cross-linking levels have been synthesized for the first time in beaded form using a non-aqueous inverse suspension polymerisation approach. The synthetic protocol was optimized with regards to several parameters including reactions conditions, type and concentration of suspension stabilizer and controlled low temperature addition of co-initiator. Particle size measurements confirm the production of beads with average diameters of 700e950 mm. Optimization of the monomer composition of the poly (vinyl ether) gels resulted in a novel beaded polymer support with considerably improved as well as unique swelling characteristics in solvents ranging from hexane to water. The synthetic utility of the new gel was confirmed by carrying out a set of transformations with complete conversion leading to a useful amino and hydroxy terminated solid-phase precursor resin. Reaction progress could be monitored easily by 1H and 13C gel-phase NMR.

Synthesis of a mononuclear oxidovanadium(V) complex by bridge-splitting of the corresponding binuclear precursor

The mononuclear oxidovanadium(V) complex VO(OEt)L (2), where L2- is the dianion of a diprotic tridentate ONO donor ligand, 2-hydroxyacetophenone-2-aminobenzoylhydrazone (H2L), has been synthesized by oxido-bridge splitting of the corresponding binuclear complex V2O3L2 (1) and structurally characterized by single crystal X-ray diffraction analysis, together with electrochemical and spectral studies. Splitting of the oxido-bridge was effected by refluxing 1 with excess triphenylphosphine in ethanol medium. The crystal structure of 2 is compared with that of the precursor binuclear complex 1.

One-pot three component reaction involving cyclohexyl isocyanide for the synthesis of furo[3,4-b]chromenes

On stirring an equimolar mixture of 4-oxo-4H-chromene-3-carbaldehyde, ninhydrin and cyclohexyl isocyanide in CH(2)Cl(2)-MeOH (7: 1) at room temperature produces 3-cyclohexylimino-1-(2-hydroxy-1,3-dioxo-2,3-dihydro-1H-inden-2-yl)-1,3-dihydro-9H-furo[3,4-b]chromen-9-one which on hydrolysis produces 1-(2-hydroxy-1,3-dioxo-2,3-dihydro-1H-inden-2-yl)-1H-furo[3,4-b]chromene-3,9-dione. The structure of the latter compound was confirmed by single crystal X-ray diffraction

Asymmetric synthesis of peptides

The present invention provides a process comprising substitution of an acceptor molecule comprising a group -XC(O)- wherein X is O, S or NR8, where R8 is C1-6 alkyl, C6-12 aryl or hydrogen, with a nucleophile, wherein the acceptor molecule is cyclised such that said nucleophilic substitution at -XC (O)- occurs without racemisation. This process has particular application for the production of a peptide by extension from the activated carboxy-terminus of an acyl amino acid residue without epimerisation.

Synthesis of ligands for use in actinide extraction

The invention discloses an improved process for the preparation of 2,2,5,5-tetrasubstituted hexane-1,6-dicarbonyl compounds, and in particular diethyl 2,2,5,5-tetramethylhexanedioate and dimethyl 2,2,5,5-tetramethylhexanedioate, by the alkylation of 1,2-difunctional ethane compounds with enolates of carbonyl compounds. The process provides higher yields and greater synthetic brevity than existing processes.

Asymmetric synthesis of peptides

The present invention provides a process comprising substitution of an acceptor molecule comprising a group -XC(O)- wherein X is O, S or NR8, where R8 is C1-6 alkyl, C6-12 aryl or hydrogen, with a nucleophile, wherein the acceptor molecule is cyclised such that said nucleophilic substitution at -XC (O)- occurs without racemisation. This process has particular application for the production of a peptide by extension from the activated carboxy-terminus of an acyl amino acid residue without epimerisation.

High yield production of a soluble bifidobacterial β-galactosidase (BbgIV) inE. coliDH5α with improved catalytic efficiency for the synthesis of prebiotic galactooligosaccharides

The bifidobacterial β-galactosidase (BbgIV) was produced in E. coli DH5α at 37 and 30 °C in a 5 L bioreactor under varied conditions of dissolved oxygen (dO2) and pH. The yield of soluble BbgIV was significantly (P < 0.05) increased once the dO2 dropped to 0–2% and remained at such low values during the exponential phase. Limited dO2 significantly (P < 0.05) increased the plasmid copy number and decreased the cells growth rate. Consequently, the BbgIV yield increased to its maximum (71–75 mg per g dry cell weight), which represented 20–25% of the total soluble proteins in the cells. In addition, the specific activity and catalytic efficiency of BbgIV were significantly (P < 0.05) enhanced under limited dO2 conditions. This was concomitant with a change in the enzyme secondary structure, suggesting a link between the enzyme structure and function. The knowledge generated from this work is very important for producing BbgIV as a biocatalyst for the development of a cost-effective process for the synthesis of prebiotic galactooligosaccharides from lactose.

Synthesis of thiolated and acrylated nanoparticles using thiol-ene click chemistry: towards novel mucoadhesive materials for drug delivery

Thiol- and acrylate-functionalized nanoparticles have been synthesized from pentaerythritol tetrakis(3-mercapto-propionate) and pentaerythritol tetraacrylate using thiol-ene click chemistry. Using Raman and 1H NMR spectroscopy as well as Ellman's assay, it was demonstrated that excess pentaerythritol tetraacrylate in the feed mixture led to nanoparticles with free acrylate groups on their surface, whereas nanoparticles with thiolated surfaces could be synthesized using feed mixtures with excess pentaerythritol tetrakis(3-mercapto-propionate). The possibility of fluorescent labelling of thiolated nanoparticles has been demonstrated through their reaction with fluorescein-5-maleimide. The thiolated nanoparticles were found to be mucoadhesive and exhibited retention on mucosal surface of porcine urinary bladder.

A global quantitative synthesis of local and landscape effects on wild bee pollinators in agroecosystems

Bees provide essential pollination services that are potentially affected both by local farm management and the surrounding landscape. To better understand these different factors, we modelled the relative effects of landscape composition (nesting and floral resources within foraging distances), landscape configuration (patch shape, interpatch connectivity and habitat aggregation) and farm management (organic vs. conventional and local-scale field diversity), and their interactions, on wild bee abundance and richness for 39 crop systems globally. Bee abundance and richness were higher in diversified and organic fields and in landscapes comprising more high-quality habitats; bee richness on conventional fields with low diversity benefited most from high-quality surrounding land cover. Landscape configuration effects were weak. Bee responses varied slightly by biome. Our synthesis reveals that pollinator persistence will depend on both the maintenance of high-quality habitats around farms and on local management practices that may offset impacts of intensive monoculture agriculture.

Synthesis of novel hyperbranched polymers featuring oxazoline linear units and their application in fast-drying solvent-borne coating formulations

Novel acid-terminated hyperbranched polymers (HBPs) containing adipic acid and oxazoline monomers derived from oleic and linoleic acid have been synthesized via a bulk polymerization procedure. Branching was achieved as a consequence of an acid-catalyzed opening of the oxazoline ring to produce a trifunctional monomer in situ which delivered branching levels of >45% as determined by 1H and 13C NMR spectroscopy. The HBPs were soluble in common solvents, such as CHCl3, acetone, tetrahydrofuran, dimethylformamide, and dimethyl sulfoxide and were further functionalized by addition of citronellol to afford white-spirit soluble materials that could be used in coating formulations. During end group modification, a reduction in branching levels of the HBPs (down to 12–24%) was observed, predominantly on account of oxazoline ring reformation and trans-esterification processes under the reaction conditions used. In comparison to commercial alkyd resin paint coatings, formulations of the citronellol-functionalized hyperbranched materials blended with a commercial alkyd resin exhibited dramatic decreases of the blend viscosity when the HBP content was increased. The curing characteristics of the HBP/alkyd blend formulations were studied by dynamic mechanical analysis which revealed that the new coatings cured more quickly and produced tougher materials than otherwise identical coatings prepared from only the commercial alkyd resins.

Crystal design approaches for the synthesis of paracetamol co-crystals

Crystal engineering principles were used to design three new co-crystals of paracetamol. A variety of potential cocrystal formers were initially identified from a search of the Cambridge Structural Database for molecules with complementary hydrogen-bond forming functionalities. Subsequent screening by powder X-ray diffraction of the products of the reaction of this library of molecules with paracetamol led to the discovery of new binary crystalline phases of paracetamol with trans-1,4- diaminocyclohexane (1); trans-1,4-di(4-pyridyl)ethylene (2); and 1,2-bis(4-pyridyl)ethane (3). The co-crystals were characterized by IR spectroscopy, differential scanning calorimetry, and 1H NMR spectroscopy. Single crystal X-ray structure analysis reveals that in all three co-crystals the co-crystal formers (CCF) are hydrogen bonded to the paracetamol molecules through O−H···N interactions. In co-crystals (1) and (2) the CCFs are interleaved between the chains of paracetamol molecules, while in co-crystal (3) there is an additional N−H···N hydrogen bond between the two components. A hierarchy of hydrogen bond formation is observed in which the best donor in the system, the phenolic O−H group of paracetamol, is preferentially hydrogen bonded to the best acceptor, the basic nitrogen atom of the co-crystal former. The geometric aspects of the hydrogen bonds in co-crystals 1−3 are discussed in terms of their electrostatic and charge-transfer components.