A facile one step synthesis of N-2 substituted 3-phenyliminoisoindolinones from N-(2-carboxybenzoyl)-anthranilic acid and the design of reverse-turn mimetics

Stirring of N-(2-carboxybenzoyl) anthranilic acid with anilines and amines such as p-toluidine, benzylamine, methyl esters of Leu, Phe, Ile and Val in presence of DCC produces N- 2 substituted 3-phenyliminoisoindolinones in very good yields. Single crystal X-ray diffraction studies and solution phase NMR and CD studies reveal that the 3-phenyliminoisoindolinone moiety is a turn-inducing scaffold which should be useful for reverse-turn mimetics.

Ring-rearrangement metathesis of substituted 2-aminonorbornenes

In this report we describe the ring-rearrangement metathesis of 2-aminonorbornene derivatives. Ail efficient ruthenium-catalysed metathesis reaction Occurs with a wide range of pendent alkenes and alkynes to generate bicyclic amines and amides.

Dihydrogen in cation-substituted zeolites X - an inelastic neutron scattering study

An inelastic neutron scattering (INS) study of the rotational - vibrational spectrum of dihydrogen sorbed by zeolite X having substituted sodium, calcium and zinc cations is reported. The rotational - vibrational spectrum of H-2 was observed at low energy transfer ( below ca. 25 meV, 202 cm(-1)); the vibration was that of the H-2 molecule against the binding site (H-2 - X, not H - H). The vibration frequency was proportional to the polarising power of the cation (Na+ < Ca2+ < Zn2+). Polarisation of the H-2 molecule dominated the interaction of H-2 with this binding site. The total scattering intensity was proportional to the dihydrogen dose. However the vibrational intensities became constant at ca. 0.3 wt% showing that the H-2 binding sites had saturated. Additional dihydrogen appeared as unbound or weakly bound dihydrogen exhibiting recoil.

Conformational and hydration effects of site-selective sodium, calcium and strontium ion binding to the DNA Holliday junction structure d(TCGGTACCGA)(4)

The role of metal ions in determining the solution conformation of the Holliday junction is well established, but to date the picture of metal ion binding from structural studies of the four-way DNA junction is very incomplete. Here we present two refined structures of the Holliday junction formed by the sequence d(TCGGTACCGA) in the presence of Na+ and Ca2+, and separately with Sr2+ to resolutions of 1.85 Angstrom and 1.65 Angstrom, respectively. This sequence includes the ACC core found to promote spontaneous junction formation, but its structure has not previously been reported. Almost complete hydration spheres can be defined for each metal cation. The Na+ sites, the most convincing observation of such sites in junctions to date, are one on either face of the junction crossover region, and stabilise the ordered hydration inside the junction arms. The four Ca2+ sites in the same structure are at the CG/CG steps in the minor groove. The Sr2+ ions occupy the TC/AG, GG/CC, and TA/TA sites in the minor groove, giving ten positions forming two spines of ions, spiralling through the minor grooves within each arm of the stacked-X structure. The two structures were solved in the two different C2 lattices previously observed, with the Sr2+ derivative crystallising in the more highly symmetrical form with two-fold symmetry at its centre. Both structures show an opening of the minor groove face of the junction of 8.4degrees in the Ca2+ and Na+ containing structure, and 13.4degrees in the Sr2+ containing structure. The crossover angles at the junction are 39.3degrees and 43.3degrees, respectively. In addition to this, a relative shift in the base pair stack alignment of the arms of 2.3 Angstrom is observed for the Sr2+ containing structure only. Overall these results provide an insight into the so-far elusive stabilising ion structure for the DNA Holliday junction. (C) 2003 Elsevier Science Ltd. All rights reserved.

Impact properties of glass/plant fibre hybrid laminates

The use of plants fibre reinforced composites has continuously increased during recent years. Their low density, higher environmental friendliness, and reduced cost proved particularly attractive for low-tech applications e.g., in building, automotive and leisure time industry. However, a major limitation to the use of these materials in structural components is unsatisfactory impact performance. An intermediate approach, the production of glass/ plant fibre hybrid laminates, has also been explored, trying to obtain materials with sufficient impact properties, whilst retaining a reduced cost and a substantial environmental gain. A survey is given on some aspects, crucial for the use of glass/plant fibre hybrid laminates in structural components: performance of hybrids when subjected to impact testing; the effect of laminate configuration, manufacturing procedure and fibre treatment on impact properties of the composite. Finally, indications are provided for a suitable selection of plant fibres with minimal extraction damage and sufficient toughness, for introduction in an impact-resistant glass/plant fibre hybrid laminate.

Bioactive peptides from food proteins: new opportunities and challenges

Food proteins such as milk and soy are a rich source of bioactive peptides. In the last decade, research into this area has intensified and new bioactive peptide sequences have been discovered with a range of apparent biological functions; for example, antihypertensive, antioxidant, and antimicrobial effects and opiate-like qualities have been reported. These peptides could therefore lead to the development of important functional food products and ingredients for the prevention and even treatment of chronic diseases such as cardiovascular disease and cancer. Peptides can be produced by fermentation with dairy starters for instance, and by enzymatic hydrolysis with pancreatic and microbial enzymes. Further purification is typically carried out by membrane filtration and/or chromatographic methods. The production of novel bioactive peptides and their incorporation into functional food products poses several technological challenges as well as regulatory and marketing issues. Proof of efficacy is of paramount importance; this should be verified by conducting appropriate tests in vivo in animals and in humans. In addition, tests for cytotoxicity and allergenicity must be conducted. Despite all of these hurdles, scientific evidence is increasingly demonstrating the health benefits of diet-based disease prevention, and therefore new developments in this area are likely to continue both at the research and the commercialisation level.

Permeation of bioactive constituents from Arnica montana preparations through human skin in-vitro

This study investigated and characterised transdermal permeation of bioactive agents from a topically applied Arnica montana tincture. Permeation experiments conducted over 48 h used polyclimethylsiloxane (silastic) and human epidermal membranes mounted in Franz-type diffusion cells with a methanol-water (50:50 v/v) receptor fluid. A commercially available tincture of A. montana L. derived from dried Spanish flower heads was a donor solution. Further donor solutions prepared from this stock tincture concentrated the tincture constituents 1, 2 and 10 fold and its sesquiterpene lactones 10 fold. Permeants were assayed using a high-performance liquid chromatography method. Five components permeated through silastic membranes providing peaks with relative retention factors to an internal standard (santonin) of 0.28, 1.18, 1.45, 1.98 and 2.76, respectively. No permeant was detected within 12 h of applying the Arnica tincture onto human epidermal membranes. However, after 12 h, the first two of these components were detected. These were,shown by Zimmermann reagent reaction to be sesquiterpene lactones and liquid chromatography/diode array detection/mass spectrometry indicated that these two permeants were 11,13-dihydrohelenalin (DH) analogues (methacrylate and tiglate esters). The same two components were also detected within 3 h of topical application of the 10-fold concentrated tincture and the concentrated sesquiterpene lactone extract.

The synthesis and cytotoxic evaluation of a series of benzodioxole substituted titanocenes

Using 6-benzo[1,3]dioxolefulvene (1a), a series of benzodioxole substituted titanocenes was synthesized. The benzyl-substituted titanocene bis[(benzo[1,3]dioxole)-5-methylcyclopentadienyl] titanium (IV) dichloride (2a) was synthesized from the reaction of Super Hydride with 1a. An X-ray determined crystal structure was obtained for 2a. The ansa-titanocene (1,2-di(cyclopentadienyl)1,2-di-(benzo[1,3]dioxole)-ethanediyl) titanium(IV) dichloride (2b) was synthesized by reductive dimerisation of la with titanium dichloride. The diarylmethyl substituted titanocene bis(di(benzo[1,3]dioxole)-S-methylcyclopentadienyl) titanium(IV) dichloride (20 was synthesized by reacting la with the para-lithiated benzodioxole followed by transmetallation with titanium tetrachloride. When titanocenes 2a-c were tested against pig kidney (LLC-PK) cells inhibitory concentrations (IC50) of 2.8 X 10(-4), 1.6 x 10(-4) and 7.6 x 10(-5) m, respectively, were observed. These values represent improved cytotoxicity against LLC-PK, when compared with unsubstituted titanocene dichloride, but are not as impressive as values obtained for titanocenes previously synthesized using the above methods. Copyright (c) 2006 John Wiley & Sons, Ltd.

Heteroaryl substituted titanocenes as potential anti-cancer drugs

From the reaction of Super Hydride (LiBEt3H) with 6-(furyl)fulvene (1a), 6-(thiophenyl)fulvene (1b) or 6-(N-methyl-pyrrole)fulvene (1c) the corresponding lithium cyclopentadienide intermediates (2a-c) were obtained. These intermediates were reacted with titanium tetrachloride and bis-[(furyl-2-cyclopentadienylmethane)] titanium(IV) dichloride (3a) and bis-[(thiophenyl-2-cyclopentadienylmethane)] titanium(IV) dichloride (3b) and bis-[(N-methylpyrrole-2-cyclopentadienylmethane)] titanium(IV) dichloride (3c) were obtained and subsequently characterised by X-ray crystallography. When titanocenes 3a-c were tested against pig kidney (LLC-PK) cells inhibitory concentrations (IC50) of 1.6 x 10(-4) M, 1.5 x 10(-4) M and 9.1 x 10(-5) M, respectively, were observed. These values represent improved cytotoxicity against LLC-PK, when compared to their corresponding ansa substituted analogues and also in comparison to unsubstituted titanocene dichloride. (c) 2006 Elsevier Inc. All rights reserved.

Proliferative and antiproliferative effects in substituted titanocene anticancer drugs

Substituted titanocenes like ansa-titanocenes, diarylmethyl-substituted and benzyl-substituted titanocenes, are known for their cytotoxic potential and they can be synthesised using 6-arylfulvenes. Nevertheless, in the case of using 6-(4-morpholin-4yl-phenyl) fulvene (5a) or 6-{[bis-(2-methoxyethyl)amino]phenyl} fulvene (5b) the synthetic possibilities seem to be limited, but the morpholino and the bis-(2-methoxyethyl)amino substituent are in terms of an improved water solubility and drug availability in the cell very interesting groups. The corresponding benzaldehydes, which are the starting material for the synthesis of these fulvenes, were not commercially available and therefore, a modified synthetic approach had to be introduced. Nevertheless, the reactivity of the obtained fulvenes was unexpected and only the ansa-titanocene bis-[{[bis-(2-methoxyethyl)amino]phenyl}cyclopentadienyl] titanium(IV) dichloride (6b) and the benzyl-substituted titanocene [1,2-di(cyclopentadienyl)-1,2-di(4-morpholin-4yl-phenyl)-ethanediyl] titanium dichloride (8a) could be obtained and characterised. When the benzyl-substituted titanocene (8a) was tested against pig kidney cells (LLC-PK) an anti-proliferative effect, resulting in an IC50 value of 25 mu M, was observed. This IC50 value is in the lower range of the cytotoxicities evaluated for titanocenes up to now. The ansa-titanocene (6b) showed surprisingly, when tested on the same cell line, a proliferative effect.

Glycol methyl ether and glycol amine substituted titanocenes as antitumor agents

6-[4-(2-Methoxyethoxy)phenyl]fulvene (3a) and 6-(4-[2-(di-methylamino)ethoxy]phenyl)fulvene (3b) were prepared as starting materials for the synthesis of three dofferent classes of titanocenes, which are ansa-titanocenes, diarylmethyl-substituted titanicenes and benzyl-substituted titanocenes and benyzyl-subtituted titanocenes. Because the synthetic possibilities seem to be limited, only ansa-titanocene {1,2-bis(cyclopentadienyl)-1,2-bis[4-(2-methoxyethoxy)phenyl]ethanediyl}titanium dichloride (4a) and benzyl-substituted titanocene bis-{[4-(2-methoxyethoxy)benzyl]cyclopentadienyl}titantium(IV) dichloride (6a) were obtained and characterised. The change in the substitution pattern f the phenyl moiety from an oxygen atom to a nitrogen atom had such a big influence on the reaction that not one compound of the threee titanocene classes could be synthesised, and it was also not possible to obtain diarylmethyl-substituted titanocenes with the use of either of the fulvenes. When benzyl-substituted titanocene 6a was tested agianst pig kidney cells (LLC-PK), an antiproliferative effect that result in an IC50 value of 43 mu m, was observed. This IC50 value is in the lower range of the cytotoxicities evaluated for titanocenes up to now. ansa-Titanocene 4a surprisingly showed, when tested on the same cell line, a proliferative effect together with a fast rate of hydrolysis.