Social Panorama of Latin America 1999-2000

Includes bibliography

Desempenho de semeadora-adubadora em função do prepa ro de solo e espa çamento da cultura do milho

The performance of machines and agricultural implements are of fundamental importance, especially when subjected to different types of soil tillage, and have to adapt to these conditions, in order to promote good operational performance. The objective of this study was to analyze the operational performance of a Marchesan Supreme Cop grain drill, equipped with four rows, spaced 0.90 m, according to three types of tillage: conventional tillage (plowing and two harrowing series), reduced tillage (scarification with a roller), and no-tillage, in areas previously seeded with maize (Zea mays L.), at two spacing measures (0.90 m and 0.45 m). The results indicate that the demand for power, tensile stress, and motor rotation, in the sowing operation, were not influenced by tillage and maize crop. The tractor wheel slip showed different results, being lower in no-tillage and higher in conventional and reduced tillage.

Aplicação do Processo Analítico Hierarquico (AHP) Para Priorização de Obras de Intervenção em Áreas e Setores de Risco Geológico nos Municípios de Itapecerica da Serra e Suzano (SP)

Municipal Plans of Risk Reducing (PMRR's) were produced in settlements in the municipalities of Itapecerica da Serra (SP) and Suzano (SP), covering areas at risk of landslides and washouts of banks of streams. The development of PMRR's provided the delimitation of areas of risk, the indication of intervention works in order to eliminate and / or reduce risks, and consequently an indication of the areas and priority sectors for implementation of intervention works. The prioritization of areas and sectors that should receive the works of reducing or eliminating risk was performed by an expert involved in risk mapping. Despite the specialist's judgment exercise caution, the decision regarding the priority sites for implementation of alternative interventions is subjective. Since there is no way to eliminate this subjectivity, the use of decision-making techniques is important to evaluate whether the expert's reasoning is consistent. One of the first techniques developed for multiple criteria is the AHP (Analytic Hierarchy Process). This paper describes the results of a research carried out in order to assess whether the use of Analytic Hierarchy Process contributes to the results of the indication of the areas and priority sectors for implementation of interventions can be considered more consistent than in situations where the priority occurs without the use of decision making techniques. Results were compared between the prioritization of interventions for implementation contained in PMRR's of Itapecerica da Serra and Suzano and those obtained from the use of Analytic Hierarchy Process (AHP). It was concluded that such techniques permits an evaluation of the expert's judgment is logically coherent, thus contributing to produce results more technically based.

Bond strength of adhesive systems with different solvents to dry and wet dentin

Aim: This study evaluates bond strength between dentin and composite using adhesives with different solvents to dry and wet dentin. Materials and methods: Ninety bovine incisors were used; the vestibular surfaces were worn by the exposure of an area with a diameter of 4 mm of dentin. The specimens were divided into 6 groups, according to the type of adhesive used and hydratation stals: Group SB-wet: Single Bond 2 in wet dentin, Group SBdry: Single Bond 2 in dry dentin, Group SL-wet: Solobond M in wet dentin, Group SL-dry: Solobond M in dentin dry. Group XPwet: XP Bond in wet dentin, Group XP-dry: XP Bond in dentin dry. They were cut to obtain specimens in the shape of stick with 1 × 1 mm and subjected to microtensile test in universal testing machine with a cross speed of 1mm/min. The data were analyzed with ANOVA and Tukey's tests (5%). Results: ANOVA showed significant differences for surface treatment and interaction, but no difference was found for adhesive factor. The Tukey's test showed that the samples with wet dentin shown higher values of bond strength. Conclusion: The adhesive did not influence in the bond strength. The groups with wet dentin showed higher values of bond strength than groups with dry dentin.

Influence of CVD diamond tips and Er:YAG laser irradiation on bonding of different adhesive systems to dentin

Aim: The aim of this study was to compare the microtensile bond strength of three adhesive systems, using different methods of dentin preparation. Materials and methods: A hundred and eight bovine teeth were used. The dentin from buccal face was exposed and prepared with three different methods, divided in 3 groups: Group 1 (DT)- diamond tip on a high-speed handpiece; Group 2 (CVD)-CVD tip on a ultrasonic handpiece; Group 3 (LA)-Er: YAG laser. The teeth were divided into 3 subgroups, according adhesive systems used: Subgroup 1-Adper Single Bond Plus/3M ESPE (SB) total-etch adhesive; Subgroup 2-Adper Scotchbond SE/3M ESPE (AS) selfetching adhesive; Subgroup 3-Clearfil SE Bond/Kuraray (CS) selfetching adhesive. Blocks of composite (Filtek Z250-3M ESPE) 4 mm high were built up and specimens were stored in deionized water for 24 hours at 37°C. Serial mesiodistal and buccolingual cuts were made and stick-like specimens were obtained, with transversal section of 1.0 mm2. The samples were submitted to microtensile test at 1 mm/min and load of 10 kg in a universal testing machine. Data (MPa) were subjected to ANOVA and Tukey's tests (p < 0.05). Results and conclusion: Surface treatment with Diamond or CVD tips associated with Clearfil SE Bond adhesive produced significantly lower bond strength values compared to other groups. Surface treatment with Er: YAG laser associated with Single Bond Plus or Clearfil SE Bond adhesives and surface treatment with CVD tip associated with Adper Scotchbond SE adhesive produced significantly lower bond strength values compared to surface treatment with diamond or CVD tips associated with Single Bond Plus or Adper Scotchbond SE adhesives. Clinical significance: Interactions between laser and the CVD tip technologies and the different adhesive systems can produce a satisfactory bonding strength result, so that these associations may be beneficial and enhance the clinical outcomes.

Posicionamento por ponto preciso estático e cinemático: implementação e análise

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Aplicações da teoria da potência complexa instantânea no cálculo das grandezas de Buchholz-Goodhue

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Modelagem do escoamento ao longo de evaporadores de serpentina com tubos aletados

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Influência do tipo de preparo e sistema adesivo na resistência de união à dentina bovina

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Resistência adesiva de reparos em resina composta: tratamento da superfície com ponta diamantada, jato de óxido de alumínio e laser de Er:YAG

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

O infantil e a educação: uma investigação a partir de narrativa de crianças

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho operacional de um subsolador de hastes com curvatura lateral (“Paraplow”), em função de diferentes velocidades de deslocamento e profundidades de trabalho

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)

Desempenho de semeadoras-adubadoras de milho (Zea mays L.) em sistema de plantio direto

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Características de secagem de bastões cárneos para alimentação canina

Pós-graduação em Engenharia e Ciência de Alimentos - IBILCE

Análise teórico-experimental de um tabuleiro misto madeira-concreto composto por vigas circulares

Coordenação de Aperfeiçoamento de Pessoal de Nível Superior (CAPES)