Essays on economic growth

A fundamental question in development economics is why some economies are rich and others poor. To illustrate the income per capita gap across economies consider that the average gross domestic product (GDP) per capita of the richest 10 percent of economies in the year 2010 was a factor of 40-fold that of the poorest 10 percent of economies. In other words, the average person in a rich economy produces in just over 9 days what the average person in a poor economy produces in an entire year. What are the factors that can explain this difference in standard of living across the world today? With this in view, this dissertation is a conjunction of three essays on the economic growth field which we seek a possible responses to this question. The first essay investigates the existence of resource misallocation in the Brazilian manufacturing sector and measures possible distortions in it. Using a similar method of measurement to the one developed by Hsieh and Klenow (2009) and firm-level data for 1996-2011 we find evidence of misallocation in the manufacturing sector during the observed period. Moreover, our results show that misallocation has been growing since 2005, and it presents a non-smooth dynamic. Significantly, we find that the Brazilian manufacturing sector operates at about 50% of its efficient product. With this, if capital and labor were optimally reallocated between firms and sectors we would obtain an aggregate output growth of approximately 110-180% depending on the mode in which the capital share is measured. We also find that the economic crisis did not have a substantial effect on the total productivity factor or on the sector's misallocation. However, small firms in particular seem to be strongly affected in a global crisis. Furthermore, the effects described would be attenuated if we consider linkages and complementarity effects among sectors. Despite Brazil's well-known high tax burden, there is not evidence that this is the main source of resource misallocation. Moreover, there is a distinct pattern of structural change between the manufacturing sectors in industrialized countries and those in developing countries. Therefore, the second essay demonstrate that this pattern differs because there are some factors that distort the relative prices and also affect the output productivity. For this, we present a multi-sector model of economic growth, where distortions affect the relative prices and the allocation of inputs. This phenomenon imply that change of the production structure or perpetuation of the harmful structures to the growth rate of aggregate output. We also demonstrate that in an environment with majority decision, this distortion can be enhanced and depends on the initial distribution of firms. Furthermore, distortions in relative prices would lead to increases in the degree of misallocation of resources, and that imply that there are distinct patterns of structural changes between economies. Finally, the calibrated results of the framework developed here converge with the structural change observed in the firm-level data of the Brazilian manufacturing sector. Thereafter, using a cross-industry cross-country approach, the third essay investigates the existence of an optimal level of competition to enhance economic growth. With that in mind, we try to show that this optimal level is different from industrialized and under development economies due to the technology frontier distance, the terms of trade, and each economy's idiosyncratic characteristics. Therefore, the difference in competition industry-country level is a channel to explain the output for worker gap between countries. The theoretical and empirical results imply the existence of an inverted-U relationship between competition and growth: starting for an initially low level of competition, higher competition stimulates innovation and output growth; starting from a high initial level of competition, higher competition has a negative effect on innovation and output growth. Given on average industries in industrialized economies present higher competition level. With that if we control for the terms of trade and the industry-country fixed effect, if the industries of the developing economy operated under the same competition levels as of the industrialized ones, there is a potential increase of output of 0.2-1.0% per year. This effect on the output growth rate depends on the competition measurement used.

Differences in the perception of interest representation: a comparision of Brasília and Brussels lobbying activity

The research topic of this paper is focused on the analysis of how trade associations perceive lobbying in Brussels and in Brasília. The analysis will be centered on business associations located in Brasília and Brussels as the two core centers of decision-making and as an attraction for the lobbying practice. The underlying principles behind the comparison between Brussels and Brasilia are two. Firstof all because the European Union and Brazil have maintained diplomatic relations since 1960. Through these relations they have built up close historical, cultural, economic and political ties. Their bilateral political relations culminated in 2007 with the establishment of a Strategic Partnership (EEAS website,n.d.). Over the years, Brazil has become a key interlocutor for the EU and it is the most important market for the EU in Latin America (European Commission, 2007). Taking into account the relations between EU and Brazil, this research could contribute to the reciprocal knowledge about the perception of lobby in the respective systems and the importance of the non-market strategy when conducting business. Second both EU and Brazilian systems have a multi-level governance structure: 28 Member States in the EU and 26 Member States in Brazil; in both systems there are three main institutions targeted by lobbying practice. The objective is to compare how differences in the institutional environments affect the perception and practice of lobbying, where institutions are defined as ‘‘regulative, normative, and cognitive structures and activities that provide stability and meaning to social behavior’’ (Peng et al., 2009). Brussels, the self-proclaimed "Capital of Europe”, is the headquarters of the European Union and has one of the highest concentrations of political power in the world. Four of the seven Institutions of the European Union are based in Brussels: the European Parliament, the European Council, the Council and the European Commission (EU website, n.d.). As the power of the EU institutions has grown, Brussels has become a magnet for lobbyists, with the latest estimates ranging from between 15,000 and 30,000 professionals representing companies, industry sectors, farmers, civil society groups, unions etc. (Burson Marsteller, 2013). Brasília is the capital of Brazil and the seat of government of the Federal District and the three branches of the federal government of Brazilian legislative, executive and judiciary. The 4 city also hosts 124 foreign embassies. The presence of the formal representations of companies and trade associations in Brasília is very limited, but the governmental interests remain there and the professionals dealing with government affairs commute there. In the European Union, Brussels has established a Transparency Register that allows the interactions between the European institutions and citizen’s associations, NGOs, businesses, trade and professional organizations, trade unions and think tanks. The register provides citizens with a direct and single access to information about who is engaged in This process is important for the quality of democracy, and for its capacity to deliver adequate policies, matching activities aimed at influencing the EU decision-making process, which interests are being pursued and what level of resources are invested in these activities (Celgene, n.d). It offers a single code of conduct, binding all organizations and self-employed individuals who accept to “play by the rules” in full respect of ethical principles (EC website, n.d). A complaints and sanctions mechanism ensures the enforcement of the rules and addresses suspected breaches of the code. In Brazil, there is no specific legislation regulating lobbying. The National Congress is currently discussing dozens of bills that address regulation of lobbying and the action of interest groups (De Aragão, 2012), but none of them has been enacted for the moment. This work will focus on class lobbying (Oliveira, 2004), which refers to the performance of the federation of national labour or industrial unions, like CNI (National Industry Confederation) in Brazil and the European Banking Federation (EBF) in Brussels. Their performance aims to influence the Executive and Legislative branches in order to defend the interests of their affiliates. When representing unions and federations, class entities cover a wide range of different and, more often than not, conflicting interests. That is why they are limited to defending the consensual and majority interest of their affiliates (Oliveira, 2004). The basic assumption of this work is that institutions matter (Peng et al, 2009) and that the trade associations and their affiliates, when doing business, have to take into account the institutional and regulatory framework where they do business.

Nitriding in cathodic cage of stainless steel AISI 316: influence of sample position

R.R.M. de Sousa et al. Nitriding in cathodic cage of stainless steel AISI 316: Influence of sample position. Vacuum, [s.l.], n.83, 2009. Disponivel em: . Acesso em: 04 out.2010.

Dispersion capacity of Triatoma sherlocki, Triatoma juazeirensis and laboratory-bred hybrids

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Residual stress influence on fatigue lifetimes of electroplated AISI 4340 high strength steel

Residual stresses play an important role in the fatigue lives of structural engineering components. In the case of near surface tensile residual stresses, the initiation and propagation phases of fatigue process are accelerated; on the other hand, compressive residual stresses close to the surface may increase fatigue life. In both decorative and functional applications, chromium electroplating results in excellent wear and corrosion resistance. However, it is well known that it reduces the fatigue strength of a component. This is due to high tensile internal stresses and microcrack density. Efforts to improve hard chromium properties have increased in recent years. In this study, the effect of a nickel layer sulphamate process, as simple layer and interlayer, on fatigue strength of hard chromium electroplated AISI 4340 steel hardness - HRc 53, was analysed. The analysis was performed by rotating bending fatigue tests on AISI 4340 steel specimens with the following experimental groups: base material, hard chromium electroplated, sulphamate nickel electroplated, sulphamate nickel interlayer on hard chromium electroplated and electroless nickel interlayer on hard chromium electroplated. Results showed a decrease in fatigue strength in coated specimens and that both nickel plating interlayers were responsible for the increase in fatigue life of AISI 4340 chromium electroplated steel. The shot peening pre-treatment was efficient in reducing fatigue loss in the alternatives studied.

Improvement in the fatigue strength of chromium electroplated AISI 4340 steel by shot peening

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Repair Welding Effects on the Bending Fatigue Strength of AISI 4130 Aeronautical Steel used in a Critical to the Flight-Safety Structure

The aim of this study was to analyze the effect of successive TIG (tungsten inert gas) welding repairs on the reverse bending fatigue strength of AISI 4130 steel, which is widely used in components critical to the flight-safety. In order to simulate the abrupt maneuvers, wind bursts, motor vibration and helixes efforts, which generate cyclic bending loadings at the welded joints of a specific aircraft component called motor cradle, experimental reverse bending fatigue tests were carried out on specimens made from hot-rolled steel plate, 1.10 mm (0.043 in) thick, by mean of a SCHENK PWS equipment, with load ratio R = -1, under constant amplitude, at 30 Hz frequency and room temperature. It was observed that the bending fatigue strength decreases after the TIG (Tungsten Inert Gas) welding process application on AISI 4130 steel, with subsequent decrease due to re-welding sequence as well. Microstructural analyses and microhardness measurements on the base material, heat-affected zone (HAZ) and weld metal, as well as the effects of the weld bead geometry on the obtained results, have complemented this study.

Effects of several TIG weld repairs on the axial fatigue strength of AISI 4130 aeronautical steel-welded joints

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Fatigue strength of tungsten inert gas-repaired weld joints in airplane critical structures

In this work the effect of Gas Tungsten Arc Welding (GTAW) repairs on the axial fatigue strength of an AISI 4130 steel welded joint used in airframe critical to the flight-safety was investigated. Fatigue tests were performed at room temperature on 0.89 mm thick hot-rolled plates with constant amplitude and load ratio of R = 0.1, at 20 Hz frequency. Monotonic tensile tests, optical metallography and microhardness, residual stress and weld geometric factors measurements were also performed. The fatigue strength decreased with the number of GTAW repairs, and was related to microstructural and microhardness changes, as well as residual stress field and weld profile geometry factors, which gave origin to high stress concentration at the weld toe. (C) 2011 Elsevier B.V. All rights reserved.

Combined exercise training in asymptomatic elderly with controlled hypertension: Effects on functional capacity and cardiac diastolic function

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Estratigrafia de sequências do intervalo aptiano ao albino na Bacia do Araripe, NE do Brasil

This study has as a main objective to make a detailed stratigraphic analysis of the Aptian-Albian interval in the east part of Araripe Basin, NE of Brazil which correspond, litostratigraphically, to Rio Da Batateira, Crato, Ipubi and Romualdo formations. The stratigraphic analysis was based on three different stages, the 1D, 2D and 3D analysis; these ones were adapted to the sequence stratigraphy concepts in order to create a chronostratigraphic framework for the study area within the basin. The database used in the present study contains field and well information, wells that belong to Santana Project, carried out by the Ministério de Minas e Energia- DNPM- CPRM from 1977 to 1978. The analysis 1D, which was done separately for each well and outcrop allowed the recognition of 13 sedimentary facies, mainly divided based on predominant litologies and sedimentary structures. Such facies are lithologically represented by pebble, sandstones, claystones, margas and evaporates; these facies are associated in order to characterize different depositional systems, that integrate from the continental environment (fluvial system and lacustre), paralic system (delta system and lagunar) to the marine environment (shelfenvironment). The first one, the fluvial system was divided into two subtypes: meandering fluvial system, characterized by fill channel and floodplain deposits; the facies of this system are associated vertically according to the textural thinning upward cycles (dirting-up trend pattern in well logs). Lacustrine environment is mainly related with the lithotypes of the Crato Formation, it shows a good distribution within the basin, been composed by green claystone deposits and calcareous laminated. Deltaic System represented by prodelta and delta front deposits which coarsening upward tendency. Lagunar system is characterised by the presence of anhydrite and gypsum deposits besides the black claystone deposits with vegetal fragments which do not contain a fauna typically marine. The marine platform system is composed by successions of black and gray claystone with fossiliferous fauna of Dinoflagellates (Spiniferites Mantell, Subtilisphaera Jain e Subtilisphaera Millipied genre) typical of this kind of depositional system. The sedimentary facies described are vertically arranged in cycles with progradational patterns which form textural coersening upward cycles and retrogradational, represented by textural thinning dowward cycles. Based in these cycles, in their stack pattern and the vertical change between these patterns, the systems tracks and the depositional sequences were recognized. The Low System Track (LST) and High System Track (HST) are composed by cycles with progradational stack pattern, whereas the Trangessive System Track (TST) is composed by retrogradational stack pattern cycles. The 2D stratigraphic analysis was done through the carrying out of two stratigraphic sections. For the selection of the datum the deepest maximum flooding surface was chosen, inside the Sequence 1, the execution of these sections allowed to understand the behaviour of six depositional systems along the study area, which were interpreted as cycles of second order or supercycles (cycles between 3 and 10 Ma), according to the Vail, et al (1977) classification. The Sequence 1, the oldest of the six identified is composed by the low, transgressive and high systems tracks. The first two system tracks are formed exclusively by fluvial deposits of the Rio da Batateira Formation whereas the third one includes deltaic and lacustrine deposits of the Crato Formation. The sequences 2 and 3 are formed by the transgressive systems tracks (lake spreading phase) and the highstand system track (lake backward phase). The TST of these sequences are formed by lacustrine deposits whereas HST contains deltaic deposits, indicating high rates of sedimentary supply at the time of it s deposition. The sequence 4 is composed by LST, TST and HST, The TST4 shows a significant fall of the lake base level, this track was developed in conditions of low relation between the creation rate of space of accommodation and the sedimentary influx. The TST4 marks the third phase of expansion of the lacustrine system in the section after the basin´s rift, the lacustrine system established in the previous track starts a backward phase in conditions that the sedimentary supply rate exceeds the creation rate of space accommodation. The sequence 5 was developed in two different phases, the first one is related with the latest expansion stage of the lake, (TST5), the basal track of this sequence. In this phase the base level of the lake rose considerably. The second phase (related to the TST5) indicates the end of the lacustrine domain in the Araripe Basin and the change to lagunar system ant tidal flat, with great portions in the supratidal. These systems were formed by restricted lagoons, with shallow level of water and with intermittent connections with the sea. This, was the phase when the Araripe Basin recorded the most several arid conditions of the whole interval studied, Aptian Albian, conditions that allow the formation of evaporitic deposits. The sequence 6 began its deposition after a significant fall of the sea (LST6). The sequence 6 is without any doubtlessly, the sequence that has deposits that prove the effective entrance of the sea into the Araripe Basin. The TST6, end of this sequence, represents the moment which the sea reaches its maximum level during the Aptian Albian time. The stratigraphic analysis of the Aptian Albian interval made possible the understanding that the main control in the development of the depositional sequences recognized in the Araripe Basin were the variations of the local base level, which are controlled itself by the climate changes

Nitric oxide and L-type calcium channel influences the changes in arterial blood pressure and heart rate induced by central angiotesin II

We study the voltage dependent calcium channels and nitric oxide involvement in angiotensin II-induced pressor effect. The antipressor action of L-Type calcium channel antagonist, nifedipine, has been studied when it was injected into the third ventricle prior to angiotensin II. The influence of nitric oxide on nifedipine antipressor action has also been studied by utilizing N(W)-nitro-L-arginine methyl ester (LNAME) (40 mu g/0.2 mu l) a nitric oxide synthase inhibitor and L-arginine ( 20 mu g/0.2 mu l), a nitric oxide donor agent. Adult male Holtzman rats weighting 200-250 g, with cannulae implanted into the third ventricle were injected with angiotensin II. Angiotensin II produced an elevation in mean arterial pressure and a decreased in heart rate. Such effects were potentiated by the prior injection of LNAME. L-arginine and nifedipine blocked the effects of angiotensin II. These data showed the involvement of L-Type calcium channel and a free radical gas nitric oxide in the central control of angiotensin II-induced pressor effect. This suggested that L-Type calcium channel of the circunventricular structures of central nervous system participated in both short and long term neuronal actions of ANG II with the influence of nitrergic system.

Microscopic evidence supports the hypothesis of high cellulose degradation capacity by the symbiotic fungus of leaf-cutting ants

Conselho Nacional de Desenvolvimento Científico e Tecnológico (CNPq)

Comparative structural studies on Lys49-phospholipases A(2) from Bothrops genus reveal their myotoxic site

Fundação de Amparo à Pesquisa do Estado de São Paulo (FAPESP)

Sperm storage structures in the ovary of Helicolenus dactylopterus dactylopterus (Teleostei : Scorpaenidae): An ultrastructural study

The ultrastructure of ovarian sperm storage of Helicolenus dactylopterus dactylopterus is described, before and after the spawning period. The spermatozoa remain inside cryptal structures that are situated in the interlamellar gaps and are connected to the ovarian lumen by a duct. This complex forms a highly specialised structure. During the long storage period, crypts are richly vascularised. Their surrounding simple epithelia have intercellular junctions that may serve to protect the spermatozoa from the female immune system. At the moment during which insemination of mature oocytes occurs, the sperm may be expelled from cryptal structures by means of a spasmodic contraction. During the post spawning period, residual spermatozoa that remain in the crypts are eliminated by cryptal phagocytes. At the end of the process the crypts contain only an amorphous material.