Towards a consensus view on understanding nanomaterials hazards and managing exposure

The aim of this article is to present an overview of salient issues of exposure, characterisation and hazard assessment of nanomaterials as they emerged from the consensus-building of experts undertaken within the four year European Commission coordination project NanoImpactNet. The approach adopted is to consolidate and condense the findings and problem-identification in such a way as to identify knowledge-gaps and generate a set of interim recommendations of use to industry, regulators, research bodies and funders. The categories of recommendation arising from the consensual view address: significant gaps in vital factual knowledge of exposure, characterisation and hazards; the development, dissemination and standardisation of appropriate laboratory protocols; address a wide range of technical issues in establishing an adequate risk assessment platform; the more efficient and coordinated gathering of basic data; greater inter-organisational cooperation; regulatory harmonization; the wider use of the life-cycle approaches; and the wider involvement of all stakeholders in the discussion and solution-finding efforts for nanosafety.

What can we learn from international comparisons of costs by DRG ?

OBJECTIVES: The objective of this study was to compare costs data by diagnosis related group (DRG) between Belgium and Switzerland. Our hypotheses were that differences between countries can probably be explained by methodological differences in cost calculations, by differences in medical practices and by differences in cost structures within the two countries. METHODS: Classifications of DRG used in the two countries differ (AP-DRGs version 1.7 in Switzerland and APR-DRGs version 15.0 in Belgium). The first step of this study was to transform Belgian summaries into Swiss AP-DRGs. Belgian and Swiss data were calculated with a clinical costing methodology (full costing). Belgian and Swiss costs were converted into US$ PPP (purchasing power parity) in order to neutralize differences in purchasing power between countries. RESULTS: The results of this study showed higher costs in Switzerland despite standardization of cost data according to PPP. The difference is not explained by the case-mix index because this was similar for inliers between the two countries. The length of stay (LOS) was also quite similar for inliers between the two countries. The case-mix index was, however, higher for high outliers in Belgium, as reflected in a higher LOS for these patients. Higher costs in Switzerland are thus probably explained mainly by the higher number of agency staff by service in this country or because of differences in medical practices. CONCLUSIONS: It is possible to make international comparisons but only if there is standardization of the case-mix between countries and only if comparable accountancy methodologies are used. Harmonization of DRGs groups, nomenclature and accountancy is thus required.

El dictado como tarea comunicativa

El artículo explora las utilidades didácticas del dictado (la práctica comunicativa de oralizar o leer en voz alta un escrito) para el aprendizaje funcional de una lengua materna o extranjera, en los diversos niveles de enseñanza. Después de criticar el uso tradicional de este ejercicio lingüístico, presentamos once formas diferentes de desarrollar un dictado en clase, con sus particulares contenidos, objetivos y metodologías. También analizamos con detalle la técnica más tradicional del dictado magistral, en la que el docente dicta palabra por palabra un texto al alumnado, poniendo énfasis en la ortografía; ofrecemos algunas orientaciones para incrementar el componente comunicativo de esta propuesta. Las conclusiones finales proponen entender esta técnica como un recurso metodológico variado, rico y sugerente, adaptado a cada situación de aprendizaje —y no como una práctica obligatoria y fosilizada.

The role of the pathologist in tissue banking: European Consensus Expert Group Report.

Human tissue biobanking encompasses a wide range of activities and study designs and is critical for application of a wide range of new technologies (-"omics") to the discovery of molecular patterns of disease and for implementation of novel biomarkers into clinical trials. Pathology is the cornerstone of hospital-based tissue biobanking. Pathologists not only provide essential information identifying the specimen but also make decisions on what should be biobanked, making sure that the timing of all operations is consistent with both the requirements of clinical diagnosis and the optimal preservation of biological products. This document summarizes the conclusions of a Pathology Expert Group Meeting within the European Biological and Biomolecular Research Infrastructure (BBMRI) Program. These recommendations are aimed at providing guidance for pathologists as well as for institutions hosting biobanks on how to better integrate and support pathological activities within the framework of biobanks that fulfill international standards.

Ink dating using thermal desorption and gas chromatography / mass spectrometry: comparison of results obtained in two laboratories

Recent ink dating methods focused mainly on changes in solvent amounts occurring over time. A promising method was developed at the Landeskriminalamt of Munich using thermal desorption (TD) followed by gas chromatography / mass spectrometry (GC/MS) analysis. Sequential extractions of the phenoxyethanol present in ballpoint pen ink entries were carried out at two different temperatures. This method is applied in forensic practice and is currently implemented in several laboratories participating to the InCID group (International Collaboration on Ink Dating). However, harmonization of the method between the laboratories proved to be a particularly sensitive and time consuming task. The main aim of this work was therefore to implement the TD-GC/MS method at the Bundeskriminalamt (Wiesbaden, Germany) in order to evaluate if results were comparable to those obtained in Munich. At first validation criteria such as limits of reliable measurements, linearity and repeatability were determined. Samples were prepared in three different laboratories using the same inks and analyzed using two TDS-GC/MS instruments (one in Munich and one in Wiesbaden). The inter- and intra-laboratory variability of the ageing parameter was determined and ageing curves were compared. While inks stored in similar conditions yielded comparable ageing curves, it was observed that significantly different storage conditions had an influence on the resulting ageing curves. Finally, interpretation models, such as thresholds and trend tests, were evaluated and discussed in view of the obtained results. Trend tests were considered more suitable than threshold models. As both approaches showed limitations, an alternative model, based on the slopes of the ageing curves, was also proposed.

Effective corporate governance : experimental evidence on international auditors'judgments and the contribution of financial accounting education

1 Summary This dissertation deals with two major aspects of corporate governance that grew in importance during the last years: the internal audit function and financial accounting education. In three essays, I contribute to research on these topics which are embedded in the broader corporate governance literature. The first two essays consist of experimental investigations of internal auditors' judgments. They deal with two research issues for which accounting research lacks evidence: The effectiveness of internal controls and the potentially conflicting role of the internal audit function between management and the audit committee. The findings of the first two essays contribute to the literature on internal auditors' judgment and the role of the internal audit function as a major cornerstone of corporate governance. The third essay theoretically examines a broader issue but also relates to the overall research question of this dissertation: What contributes to effective corporate governance? This last essay takes the perspective that the root for quality corporate governance is appropriate financial accounting education. r develop a public interest approach to accounting education that contributes to the literature on adequate accounting education with respect to corporate governance and accounting harmonization. The increasing importance of both the internal audit function and accounting education for corporate governance can be explained by the same recent fundamental changes that still affect accounting research and practice. First, the Sarbanes-Oxley Act of 2002 (SOX, 2002) and the 8th EU Directive (EU, 2006) have led to a bigger role for the internal audit function in corporate governance. Their implications regarding the implementation of audit committees and their oversight over internal controls are extensive. As a consequence, the internal audit function has become increasingly important for corporate governance and serves a new master (i.e. the audit committee) within the company in addition to management. Second, the SOX (2002) and the 8th EU Directive introduced additional internal control mechanisms that are expected to contribute to the reliability of financial information. As a consequence, the internal audit function is expected to contribute to a greater extent to the reliability of financial statements. Therefore, effective internal control mechanisms that strengthen objective judgments and independence become important. This is especially true when external- auditors rely on the work of internal auditors in the context of the International Standard on Auditing (ISA) 610 and the equivalent US Statement on Auditing Standards (SAS) 65 (see IFAC, 2009 and AICPA, 1990). Third, the harmonization of international reporting standards is increasingly promoted by means of a principles-based approach. It is the leading approach since a study of the SEC (2003) that was required by the SOX (2002) in section 108(d) was in favor of this approach. As a result, the Financial Accounting Standards Board (FASB) and the International Accounting Standards Board (IASB) commit themselves to the development of compatible accounting standards based on a principles-based approach. Moreover, since the Norwalk Agreement of 2002, the two standard setters have developed exposure drafts for a common conceptual framework that will be the basis for accounting harmonization. The new .framework will be in favor of fair value measurement and accounting for real-world economic phenomena. These changes in terms of standard setting lead to a trend towards more professional judgment in the accounting process. They affect internal and external auditors, accountants, and managers in general. As a consequence, a new competency set for preparers and users of financial statements is required. The basil for this new competency set is adequate accounting education (Schipper, 2003). These three issues which affect corporate governance are the initial point of this dissertation and constitute its motivation. Two broad questions motivated a scientific examination in three essays: 1) What are major aspects to be examined regarding the new role of the internal audit function? 2) How should major changes in standard setting affect financial accounting education? The first question became apparent due to two published literature reviews by Gramling et al. (2004) and Cohen, Krishnamoorthy & Wright (2004). These studies raise various questions for future research that are still relevant and which motivate the first two essays of my dissertation. In the first essay, I focus on the role of the internal audit function as one cornerstone of corporate governance and its potentially conflicting role of serving both management and the audit committee (IIA, 2003). In an experimental study, I provide evidence on the challenges for internal auditors in their role as servant for two masters -the audit committee and management -and how this influences internal auditors' judgment (Gramling et al. 2004; Cohen, Krishnamoorthy & Wright, 2004). I ask if there is an expectation gap between what internal auditors should provide for corporate governance in theory compared to what internal auditors are able to provide in practice. In particular, I focus on the effect of serving two masters on the internal auditor's independence. I argue that independence is hardly achievable if the internal audit function serves two masters with conflicting priorities. The second essay provides evidence on the effectiveness of accountability as an internal control mechanism. In general, internal control mechanisms based on accountability were enforced by the SOX (2002) and the 8th EU Directive. Subsequently, many companies introduced sub-certification processes that should contribute to an objective judgment process. Thus, these mechanisms are important to strengthen the reliability of financial statements. Based on a need for evidence on the effectiveness of internal control mechanisms (Brennan & Solomon, 2008; Gramling et al. 2004; Cohen, Krishnamoorthy & Wright, 2004; Solomon & Trotman, 2003), I designed an experiment to examine the joint effect of accountability and obedience pressure in an internal audit setting. I argue that obedience pressure potentially can lead to a negative influence on accountants' objectivity (e.g. DeZoort & Lord, 1997) whereas accountability can mitigate this negative effect. My second main research question - How should major changes in standard setting affect financial accounting education? - is investigated in the third essay. It is motivated by the observation during my PhD that many conferences deal with the topic of accounting education but very little is published about what needs to be done. Moreover, the Endings in the first two essays of this thesis and their literature review suggest that financial accounting education can contribute significantly to quality corporate governance as argued elsewhere (Schipper, 2003; Boyce, 2004; Ghoshal, 2005). In the third essay of this thesis, I therefore focus on approaches to financial accounting education that account for the changes in standard setting and also contribute to corporate governance and accounting harmonization. I argue that the competency set that is required in practice changes due to major changes in standard setting. As the major contribution of the third article, I develop a public interest approach for financial accounting education. The major findings of this dissertation can be summarized as follows. The first essay provides evidence to an important research question raised by Gramling et al. (2004, p. 240): "If the audit committee and management have different visions for the corporate governance role of the IAF, which vision will dominate?" According to the results of the first essay, internal auditors do follow the priorities of either management or the audit committee based on the guidance provided by the Chief Audit executive. The study's results question whether the independence of the internal audit function is actually achievable. My findings contribute to research on internal auditors' judgment and the internal audit function's independence in the broader frame of corporate governance. The results are also important for practice because independence is a major justification for a positive contribution of the internal audit function to corporate governance. The major findings of the second essay indicate that the duty to sign work results - a means of holding people accountable -mitigates the negative effect of obedience pressure on reliability. Hence, I found evidence that control .mechanisms relying on certifications may enhance the reliability of financial information. These findings contribute to the literature on the effectiveness of internal control mechanisms. They are also important in the light of sub-certification processes that resulted from the Sarbanes-Oxley Act and the 8th EU Directive. The third essay contributes to the literature by developing a measurement framework that accounts for the consequences of major trends in standard setting. Moreovér, it shows how these trends affect the required .competency set of people dealing with accounting issues. Based on this work, my main contribution is the development of a public interest approach for the design of adequate financial accounting curricula. 2 Serving two masters: Experimental evidence on the independence of internal auditors Abstract Twenty nine internal auditors participated in a study that examines the independence of internal auditors in their potentially competing roles of serving two masters: the audit committee and management. Our main hypothesis suggests that internal auditors' independence is not achievable in an institutional setting in which internal auditors are accountable to two different parties with potentially differing priorities. We test our hypothesis in an experiment in which the treatment consisted of two different instructions of the Chief audit executive; one stressing the priority of management (cost reduction) and one stressing the priority of the audit committee (effectiveness). Internal auditors had to evaluate internal controls and their inherent costs of different processes which varied in their degree of task complexity. Our main results indicate that internal auditors' evaluation of the processes is significantly different when task complexity is high. Our findings suggest that internal auditors do follow the priorities of either management or the audit committee depending on the instructions of a superior internal auditor. The study's results question whether the independence of the internal audit function is actually achievable. With our findings, we contribute to research on internal auditors' judgment and the internal audit function's independence in the frame of corporate governance.

Julkisen osakeyhtiön omien osakkeiden hankinta ja niiden kirjanpidollinen käsittely. Case HEXTech - Indeksin yhtiöt

Tavoitteena on selvittää ja kuvata lainsäädännön kehitys julkisen osakeyhtiön omien osakkeiden hankinnassa ja esittämisessä tilinpäätöksessä sekä miten teoriaa sovelletaan käytännössä julkisiin osakeyhtiöihin. Lähestymistapa on teoriasidonnainen, säädöstaustaan perustuva ja analyysin perustana ovat dokumentoidut säädökset. Tutkimusmenetelmä on deskriptiivinen tapaustutkimus, jonka analyysi rajoittuu vuoteen 2005. Tutkimustyön sisältö koostuu julkisesti noteerattujen osakeyhtiöiden omien osakkeiden hankkimisesta ja esittämisestä tilinpäätöksessä koskevista EuroopanUnionin direktiivien sisällön käsittelystä, niiden vaikutuksesta osakeyhtiö-, kirjanpito- ja arvopaperimarkkinalakiin sekä HEXTech - Indeksin yhtiöiden käytäntöön. Tätä käytäntöä selvitetään ja kuvataan tutkimusosuudessa. Tutkimustuloksena voidaan todeta, että lait on harmonisoitu Euroopan Yhteisöjen direktiivejä vastaavaksi. HEXTech - Indeksin yhtiöt ovat noudattaneet kirjanpito-, osakeyhtiö- ja arvopaperimarkkinalain ohjeita ja määräyksiä käytännöissään. Yhtiökokoukselta on saatu valtuutuksia hankkia omia osakkeita.Kymmenestä yhtiöstä seitsemän oli saanut valtuutuksen ja vain neljä toteutti käytännössä saamansa valtuutuksen. Kaksi yhtiötä mitätöi, yksi kannusti avainhenkilöitään hankkimillaan omilla osakkeilla ja yksi toteutti takaisinostotarjouksella omien osakkeiden hankinnan.

Development of a 3D very high-resolution seismic reflection system for lacustrine settings - a case study over a thrust fault zone in Lake Geneva

Un système efficace de sismique tridimensionnelle (3-D) haute-résolution adapté à des cibles lacustres de petite échelle a été développé. Dans le Lac Léman, près de la ville de Lausanne, en Suisse, des investigations récentes en deux dimension (2-D) ont mis en évidence une zone de faille complexe qui a été choisie pour tester notre système. Les structures observées incluent une couche mince (<40 m) de sédiments quaternaires sub-horizontaux, discordants sur des couches tertiaires de molasse pentées vers le sud-est. On observe aussi la zone de faille de « La Paudèze » qui sépare les unités de la Molasse du Plateau de la Molasse Subalpine. Deux campagnes 3-D complètes, d?environ d?un kilomètre carré, ont été réalisées sur ce site de test. La campagne pilote (campagne I), effectuée en 1999 pendant 8 jours, a couvert 80 profils en utilisant une seule flûte. Pendant la campagne II (9 jours en 2001), le nouveau système trois-flûtes, bien paramétrés pour notre objectif, a permis l?acquisition de données de très haute qualité sur 180 lignes CMP. Les améliorations principales incluent un système de navigation et de déclenchement de tirs grâce à un nouveau logiciel. Celui-ci comprend un contrôle qualité de la navigation du bateau en temps réel utilisant un GPS différentiel (dGPS) à bord et une station de référence près du bord du lac. De cette façon, les tirs peuvent être déclenchés tous les 5 mètres avec une erreur maximale non-cumulative de 25 centimètres. Tandis que pour la campagne I la position des récepteurs de la flûte 48-traces a dû être déduite à partir des positions du bateau, pour la campagne II elle ont pu être calculées précisément (erreur <20 cm) grâce aux trois antennes dGPS supplémentaires placées sur des flotteurs attachés à l?extrémité de chaque flûte 24-traces. Il est maintenant possible de déterminer la dérive éventuelle de l?extrémité des flûtes (75 m) causée par des courants latéraux ou de petites variations de trajet du bateau. De plus, la construction de deux bras télescopiques maintenant les trois flûtes à une distance de 7.5 m les uns des autres, qui est la même distance que celle entre les lignes naviguées de la campagne II. En combinaison avec un espacement de récepteurs de 2.5 m, la dimension de chaque «bin» de données 3-D de la campagne II est de 1.25 m en ligne et 3.75 m latéralement. L?espacement plus grand en direction « in-line » par rapport à la direction «cross-line» est justifié par l?orientation structurale de la zone de faille perpendiculaire à la direction «in-line». L?incertitude sur la navigation et le positionnement pendant la campagne I et le «binning» imprécis qui en résulte, se retrouve dans les données sous forme d?une certaine discontinuité des réflecteurs. L?utilisation d?un canon à air à doublechambre (qui permet d?atténuer l?effet bulle) a pu réduire l?aliasing observé dans les sections migrées en 3-D. Celui-ci était dû à la combinaison du contenu relativement haute fréquence (<2000 Hz) du canon à eau (utilisé à 140 bars et à 0.3 m de profondeur) et d?un pas d?échantillonnage latéral insuffisant. Le Mini G.I 15/15 a été utilisé à 80 bars et à 1 m de profondeur, est mieux adapté à la complexité de la cible, une zone faillée ayant des réflecteurs pentés jusqu?à 30°. Bien que ses fréquences ne dépassent pas les 650 Hz, cette source combine une pénétration du signal non-aliasé jusqu?à 300 m dans le sol (par rapport au 145 m pour le canon à eau) pour une résolution verticale maximale de 1.1 m. Tandis que la campagne I a été acquise par groupes de plusieurs lignes de directions alternées, l?optimisation du temps d?acquisition du nouveau système à trois flûtes permet l?acquisition en géométrie parallèle, ce qui est préférable lorsqu?on utilise une configuration asymétrique (une source et un dispositif de récepteurs). Si on ne procède pas ainsi, les stacks sont différents selon la direction. Toutefois, la configuration de flûtes, plus courtes que pour la compagne I, a réduit la couverture nominale, la ramenant de 12 à 6. Une séquence classique de traitement 3-D a été adaptée à l?échantillonnage à haute fréquence et elle a été complétée par deux programmes qui transforment le format non-conventionnel de nos données de navigation en un format standard de l?industrie. Dans l?ordre, le traitement comprend l?incorporation de la géométrie, suivi de l?édition des traces, de l?harmonisation des «bins» (pour compenser l?inhomogénéité de la couverture due à la dérive du bateau et de la flûte), de la correction de la divergence sphérique, du filtrage passe-bande, de l?analyse de vitesse, de la correction DMO en 3-D, du stack et enfin de la migration 3-D en temps. D?analyses de vitesse détaillées ont été effectuées sur les données de couverture 12, une ligne sur deux et tous les 50 CMP, soit un nombre total de 600 spectres de semblance. Selon cette analyse, les vitesses d?intervalles varient de 1450-1650 m/s dans les sédiments non-consolidés et de 1650-3000 m/s dans les sédiments consolidés. Le fait que l?on puisse interpréter plusieurs horizons et surfaces de faille dans le cube, montre le potentiel de cette technique pour une interprétation tectonique et géologique à petite échelle en trois dimensions. On distingue cinq faciès sismiques principaux et leurs géométries 3-D détaillées sur des sections verticales et horizontales: les sédiments lacustres (Holocène), les sédiments glacio-lacustres (Pléistocène), la Molasse du Plateau, la Molasse Subalpine de la zone de faille (chevauchement) et la Molasse Subalpine au sud de cette zone. Les couches de la Molasse du Plateau et de la Molasse Subalpine ont respectivement un pendage de ~8° et ~20°. La zone de faille comprend de nombreuses structures très déformées de pendage d?environ 30°. Des tests préliminaires avec un algorithme de migration 3-D en profondeur avant sommation et à amplitudes préservées démontrent que la qualité excellente des données de la campagne II permet l?application de telles techniques à des campagnes haute-résolution. La méthode de sismique marine 3-D était utilisée jusqu?à présent quasi-exclusivement par l?industrie pétrolière. Son adaptation à une échelle plus petite géographiquement mais aussi financièrement a ouvert la voie d?appliquer cette technique à des objectifs d?environnement et du génie civil.<br/><br/>An efficient high-resolution three-dimensional (3-D) seismic reflection system for small-scale targets in lacustrine settings was developed. In Lake Geneva, near the city of Lausanne, Switzerland, past high-resolution two-dimensional (2-D) investigations revealed a complex fault zone (the Paudèze thrust zone), which was subsequently chosen for testing our system. Observed structures include a thin (<40 m) layer of subhorizontal Quaternary sediments that unconformably overlie southeast-dipping Tertiary Molasse beds and the Paudèze thrust zone, which separates Plateau and Subalpine Molasse units. Two complete 3-D surveys have been conducted over this same test site, covering an area of about 1 km2. In 1999, a pilot survey (Survey I), comprising 80 profiles, was carried out in 8 days with a single-streamer configuration. In 2001, a second survey (Survey II) used a newly developed three-streamer system with optimized design parameters, which provided an exceptionally high-quality data set of 180 common midpoint (CMP) lines in 9 days. The main improvements include a navigation and shot-triggering system with in-house navigation software that automatically fires the gun in combination with real-time control on navigation quality using differential GPS (dGPS) onboard and a reference base near the lake shore. Shots were triggered at 5-m intervals with a maximum non-cumulative error of 25 cm. Whereas the single 48-channel streamer system of Survey I requires extrapolation of receiver positions from the boat position, for Survey II they could be accurately calculated (error <20 cm) with the aid of three additional dGPS antennas mounted on rafts attached to the end of each of the 24- channel streamers. Towed at a distance of 75 m behind the vessel, they allow the determination of feathering due to cross-line currents or small course variations. Furthermore, two retractable booms hold the three streamers at a distance of 7.5 m from each other, which is the same distance as the sail line interval for Survey I. With a receiver spacing of 2.5 m, the bin dimension of the 3-D data of Survey II is 1.25 m in in-line direction and 3.75 m in cross-line direction. The greater cross-line versus in-line spacing is justified by the known structural trend of the fault zone perpendicular to the in-line direction. The data from Survey I showed some reflection discontinuity as a result of insufficiently accurate navigation and positioning and subsequent binning errors. Observed aliasing in the 3-D migration was due to insufficient lateral sampling combined with the relatively high frequency (<2000 Hz) content of the water gun source (operated at 140 bars and 0.3 m depth). These results motivated the use of a double-chamber bubble-canceling air gun for Survey II. A 15 / 15 Mini G.I air gun operated at 80 bars and 1 m depth, proved to be better adapted for imaging the complexly faulted target area, which has reflectors dipping up to 30°. Although its frequencies do not exceed 650 Hz, this air gun combines a penetration of non-aliased signal to depths of 300 m below the water bottom (versus 145 m for the water gun) with a maximum vertical resolution of 1.1 m. While Survey I was shot in patches of alternating directions, the optimized surveying time of the new threestreamer system allowed acquisition in parallel geometry, which is preferable when using an asymmetric configuration (single source and receiver array). Otherwise, resulting stacks are different for the opposite directions. However, the shorter streamer configuration of Survey II reduced the nominal fold from 12 to 6. A 3-D conventional processing flow was adapted to the high sampling rates and was complemented by two computer programs that format the unconventional navigation data to industry standards. Processing included trace editing, geometry assignment, bin harmonization (to compensate for uneven fold due to boat/streamer drift), spherical divergence correction, bandpass filtering, velocity analysis, 3-D DMO correction, stack and 3-D time migration. A detailed semblance velocity analysis was performed on the 12-fold data set for every second in-line and every 50th CMP, i.e. on a total of 600 spectra. According to this velocity analysis, interval velocities range from 1450-1650 m/s for the unconsolidated sediments and from 1650-3000 m/s for the consolidated sediments. Delineation of several horizons and fault surfaces reveal the potential for small-scale geologic and tectonic interpretation in three dimensions. Five major seismic facies and their detailed 3-D geometries can be distinguished in vertical and horizontal sections: lacustrine sediments (Holocene) , glaciolacustrine sediments (Pleistocene), Plateau Molasse, Subalpine Molasse and its thrust fault zone. Dips of beds within Plateau and Subalpine Molasse are ~8° and ~20°, respectively. Within the fault zone, many highly deformed structures with dips around 30° are visible. Preliminary tests with 3-D preserved-amplitude prestack depth migration demonstrate that the excellent data quality of Survey II allows application of such sophisticated techniques even to high-resolution seismic surveys. In general, the adaptation of the 3-D marine seismic reflection method, which to date has almost exclusively been used by the oil exploration industry, to a smaller geographical as well as financial scale has helped pave the way for applying this technique to environmental and engineering purposes.<br/><br/>La sismique réflexion est une méthode d?investigation du sous-sol avec un très grand pouvoir de résolution. Elle consiste à envoyer des vibrations dans le sol et à recueillir les ondes qui se réfléchissent sur les discontinuités géologiques à différentes profondeurs et remontent ensuite à la surface où elles sont enregistrées. Les signaux ainsi recueillis donnent non seulement des informations sur la nature des couches en présence et leur géométrie, mais ils permettent aussi de faire une interprétation géologique du sous-sol. Par exemple, dans le cas de roches sédimentaires, les profils de sismique réflexion permettent de déterminer leur mode de dépôt, leurs éventuelles déformations ou cassures et donc leur histoire tectonique. La sismique réflexion est la méthode principale de l?exploration pétrolière. Pendant longtemps on a réalisé des profils de sismique réflexion le long de profils qui fournissent une image du sous-sol en deux dimensions. Les images ainsi obtenues ne sont que partiellement exactes, puisqu?elles ne tiennent pas compte de l?aspect tridimensionnel des structures géologiques. Depuis quelques dizaines d?années, la sismique en trois dimensions (3-D) a apporté un souffle nouveau à l?étude du sous-sol. Si elle est aujourd?hui parfaitement maîtrisée pour l?imagerie des grandes structures géologiques tant dans le domaine terrestre que le domaine océanique, son adaptation à l?échelle lacustre ou fluviale n?a encore fait l?objet que de rares études. Ce travail de thèse a consisté à développer un système d?acquisition sismique similaire à celui utilisé pour la prospection pétrolière en mer, mais adapté aux lacs. Il est donc de dimension moindre, de mise en oeuvre plus légère et surtout d?une résolution des images finales beaucoup plus élevée. Alors que l?industrie pétrolière se limite souvent à une résolution de l?ordre de la dizaine de mètres, l?instrument qui a été mis au point dans le cadre de ce travail permet de voir des détails de l?ordre du mètre. Le nouveau système repose sur la possibilité d?enregistrer simultanément les réflexions sismiques sur trois câbles sismiques (ou flûtes) de 24 traces chacun. Pour obtenir des données 3-D, il est essentiel de positionner les instruments sur l?eau (source et récepteurs des ondes sismiques) avec une grande précision. Un logiciel a été spécialement développé pour le contrôle de la navigation et le déclenchement des tirs de la source sismique en utilisant des récepteurs GPS différentiel (dGPS) sur le bateau et à l?extrémité de chaque flûte. Ceci permet de positionner les instruments avec une précision de l?ordre de 20 cm. Pour tester notre système, nous avons choisi une zone sur le Lac Léman, près de la ville de Lausanne, où passe la faille de « La Paudèze » qui sépare les unités de la Molasse du Plateau et de la Molasse Subalpine. Deux campagnes de mesures de sismique 3-D y ont été réalisées sur une zone d?environ 1 km2. Les enregistrements sismiques ont ensuite été traités pour les transformer en images interprétables. Nous avons appliqué une séquence de traitement 3-D spécialement adaptée à nos données, notamment en ce qui concerne le positionnement. Après traitement, les données font apparaître différents faciès sismiques principaux correspondant notamment aux sédiments lacustres (Holocène), aux sédiments glacio-lacustres (Pléistocène), à la Molasse du Plateau, à la Molasse Subalpine de la zone de faille et la Molasse Subalpine au sud de cette zone. La géométrie 3-D détaillée des failles est visible sur les sections sismiques verticales et horizontales. L?excellente qualité des données et l?interprétation de plusieurs horizons et surfaces de faille montrent le potentiel de cette technique pour les investigations à petite échelle en trois dimensions ce qui ouvre des voies à son application dans les domaines de l?environnement et du génie civil.

Natural vitamin C intake and the risk of head and neck cancer : a pooled analysis in the International Head and Neck Cancer Epidemiology Consortium

Evidence of associations between single nutrients and head and neck cancer (HNC) is still more limited and less consistent than that for fruit and vegetables. However, clarification of the protective mechanisms of fruit and vegetables is important to our understanding of HNC etiology. We investigated the association between vitamin C intake from natural sources and cancer of the oral cavity/pharynx and larynx using individual-level pooled data from ten case-control studies (5,959 cases and 12,248 controls) participating in the International Head and Neck Cancer Epidemiology (INHANCE) consortium. After harmonization of study-specific exposure information via the residual method, adjusted odds ratios (ORs) and corresponding 95% confidence intervals (CIs) were estimated using unconditional multiple logistic regression models on quintile categories of 'non-alcohol energy-adjusted' vitamin C intake. In the presence of heterogeneity of the estimated ORs among studies, we derived those estimates from generalized linear mixed models. Higher intakes of vitamin C were inversely related to oral and pharyngeal (OR = 0.54, 95% CI: 0.45-0.65, for the fifth quintile category versus the first one, p for trend<0.001) and laryngeal cancers (OR = 0.52, 95% CI: 0.40-0.68, p for trend = 0.006), although in the presence of heterogeneity among studies for both sites. Inverse associations were consistently observed for the anatomical subsites of oral and pharyngeal cancer, and across strata of age, sex, education, body mass index, tobacco, and alcohol, for both cancer sites. The inverse association of vitamin C intake from foods with HNC may reflect a protective effect on these cancers; however, we cannot rule out other explanations.

Cross-border post-acquisition integration performed by a Nordic information & telecommunication technology company in the transition economy context of the Czech Republic

Diplomityön tarkoituksena oli arvioida akvisition jälkeistä integraatioprosessia. Integraation tarkoitus on mukauttaa ostettu yritys toimivaksi osaksi konsernia. Työn empiirisenä ongelmana oli yleisesti tunnustettu integraatiojohtamisen kompleksisuus. Samoin myöskin akateemisesta kirjallisuudesta puuttui koherentti malli, jolla arvioida integraatiota. Tutkimuskohteena oli akvisitio, jossa suomalainen tietotekniikkan suuryritys osti osake-enemmistön tsekkiläisestä keskisuuresta ohjelmistoyrityksestä. Tutkimuksessa generoitiin integraatiojohtamisen malli tietopohjaiseen organisaatioon. Mallin mukaan integraatio koostuu kolmesta eriävästä, mutta toisiaan tukevasta alueesta: organisaatiokulttuurin yhdentyminen, tietopääoman tasaaminen ja konsernin sisäisten prosessien yhdenmukaistaminen. Näistä kaksi kaksi jälkimmäistä ovat johdettavissa, mutta kulttuurin yhdentymiseen integraatiojohtamisella voidaan vaikuttaa vain katalysoivasti. Organisaatiokulttuuri levittäytyy vain osallisten vuorovaikuksien kautta. Lisäksi tutkimus osoitti, miten akvisitio on revolutionaarinen vaihe yrityksen kehityksessä. Integraation ensimmäinen ajanjakso on revolutionaarista. Tällöin suurimmat ja näkyvimmät johdettavat muutokset pyritään saamaan aikaan, jotta integraatiossa edettäisiin evolutionaariseen kehitykseen. Revolutionaarisen intergaation vetojuhtana toimii integraatiojohto, kun taas evolutionaarinen integraatio etenee osallisten (organisaation jäsenten) itsensä toiminnan ja vuorovaikutusten kautta.

Improving ERP change tool processes to align business processes and ERP system

Nopea teknologian kehitys sekä kansainvälistymisen mukana tuoma kilpailupaine pakottavat yritykset jatkuvaan liiketoimintaprosessien kehittämiseen. Muutoksista organisaation rakenteissa sekä yrityksen prosesseissa on tullut yleisiä toimenpiteitä. Yksi näkyvimmistä toiminnallisista uudistuksesta on ollut toiminnanohjausjärjestelmän käyttöönotto. Toiminnanohjausjärjestelmän rakenne ja kehitys aiheuttaa yleensä suurimmat vaikeudet pyrittäessä rakentamaan liiketoimintaprosessien läpinäkyvyyttä esittävä tietojärjestelmäympäristö. Tässä tutkimuksessa liiketoiminnan sekä toiminnanohjausjärjestelmän prosessien yhdistäminen on tehty ns. toiminnanohjausjärjestelmä muutostyökaluilla. Kyseiset muutostyökalut on järjestetty yrityksissä tietojärjestelmä ympäristöön ja niiden avulla voidaan korjata teknisiä ongelmia sekä muuttaa itse prosesseja. Tutkimuksen empiria osuudessa on käytetty case-tutkimusmenetelmää Kone Oyj:n prosessien kehittämisosastolla. Tutkimuksen tavoitteena oli parantaa toiminnanohjausjärjestelmän muutostyökalujen prosesseja, liiketoimintaprosessien sekä toiminnanohjausjärjestelmän yhdistämiseksi ja harmonisoimiseksi. Tutkimuksen tavoitteiden täyttämiseksi, prosessijohtamisen käsitteitä käytettiin muutostyökaluprosessien parannusehdotusten löytymiseksi. Prosessijohtamisen käsitteet tarkoittavat prosessikartan, prosessin toimintojen, sekä prosessin kustannusten tutkimista ja hyväksikäyttöä. Prosessijohtamisen käsitteeseen kuuluu myös liiketoimintaprosessien jatkuvan parantamisen sekä uudelleenjärjestämisen mallien kuvaus. Toiminnanohjausjärjestelmäympäristön kuvaus teorian toisena osuutena antaa pohjaa muutostyökalujen prosessien käytölle. Tutkimuksen tuloksina voidaan todeta että tutkimusalue on hyvin monimutkainen ja vaikea. Toimintajärjestelmistä ei ole kirjoitettu teoriaa kovinkaan runsaasti, lukuunottamatta yritysten itse tekemiä tutkimuksia. Tutkimuksessa tarkasteltaville prosesseille löytyi kuitenkin parannusehdotuksia sekä ns. optimaalisen prosessimallin ominaisuuksia.

International Accounting Standards –normistoon siirtymisen vaikutukset suomalaisten pörssiyritysten taloushallintoon ja tilinpäätökseen

Tutkimuksen päätavoitteena oli selvittää, mitä vaikutuksia IAS-tilinpäätösstandardien käyttöön siirtyminen aiheuttaa suomalaisten pörssiyritysten tilinpäätöksissä ja taloushallinnossa. Tähän tavoitteeseen edettiin alatavoitteiden avulla. Näitä olivat tilinpäätösten kansainvälisen harmonisoinnin, Euroopan Unionin IAS-asetuksen ja itse IAS-tilinpäätöksen selvittäminen. Tutkimusaineisto koostuu kirjallisuudesta ja suomalaisille pörssiyrityksille tehdystä kyselystä. Tutkimuksen teoriaosassa käytetään käsiteanalyyttista ja empiirisessä osassa nomoteettista tutkimusotetta. Tutkielman mukaan tiedon lisääntyminen lisää myönteisyyttä IAS-standardistoa kohtaan. Henkilöstön koulutus onkin avainasemassa siirtymäprojektissa. Toinen merkittävä vaikutus on uuden laskentaohjeistuksen luontitarve. Merkittävin standardi vaikutuksiltaan on IAS 14 Segmenttiraportointi.

Fiscal sustainability and fiscal shocks in a dollarized and oil-exporting country: Ecuador

This paper investigates the fiscal sustainability of an emerging, dollarized, oil-exporting country: Ecuador. A cointegrated VAR approach is adopted in testing, first, if the intertemporal budget constraint is satisfied in Ecuador and, second, in identifying the permanent and transitory shocks that affect a fiscal policy characterized by inertia and a heavy dependence on oil revenues. Following confirmation that the debt-GDP ratio does not place the Ecuadorian budget under any pressure, we reformulate the model and identify two forces that push the fiscal system out of equilibrium, namely, economic activity and oil revenues implemented in the government budget. We argue that Ecuador needs to recover control of its monetary policy and to promote the diversification of its economy in order that non-oil tax revenues can replace oil revenues as a pushing force. Finally, we calculate quarterly elasticities of tax revenues with respect to Ecuador’s GDP and that of eight Eurozone countries. We illustrate graphically how the Eurozone countries with low positive or high negative elasticities’ levels suffer debt problems after the crisis. This finding emphasizes the pressing need for Ecuador to strengthen the connection between its tax revenues and output, and also suggests that the convergence of these elasticities in the Eurozone might contribute to the success of an eventually future fiscal union.

Mercury analysis in hair: comparability and quality assessment within the transnational COPHES/DEMOCOPHES project

Human biomonitoring (HBM) is an effective tool for assessing actual exposure to chemicals that takes into account all routes of intake. Although hair analysis is considered to be an optimal biomarker for assessing mercury exposure, the lack of harmonization as regards sampling and analytical procedures has often limited the comparison of data at national and international level. The European-funded projects COPHES and DEMOCOPHES developed and tested a harmonized European approach to Human Biomonitoring in response to the European Environment and Health Action Plan. Herein we describe the quality assurance program (QAP) for assessing mercury levels in hair samples from more than 1800 mother-child pairs recruited in 17 European countries. To ensure the comparability of the results, standard operating procedures (SOPs) for sampling and for mercury analysis were drafted and distributed to participating laboratories. Training sessions were organized for field workers and four external quality-assessment exercises (ICI/EQUAS), followed by the corresponding web conferences, were organized between March 2011 and February 2012. ICI/EQUAS used native hair samples at two mercury concentration ranges (0.20-0.71 and 0.80-1.63) per exercise. The results revealed relative standard deviations of 7.87-13.55% and 4.04-11.31% for the low and high mercury concentration ranges, respectively. A total of 16 out of 18 participating laboratories the QAP requirements and were allowed to analyze samples from the DEMOCOPHES pilot study. Web conferences after each ICI/EQUAS revealed this to be a new and effective tool for improving analytical performance and increasing capacity building. The procedure developed and tested in COPHES/DEMOCOPHES would be optimal for application on a global scale as regards implementation of the Minamata Convention on Mercury.

Analytical Strategies for Doping Control Purposes: Needs, Challenges, and Perspectives.

The fight against doping in sports has been governed since 1999 by the World Anti-Doping Agency (WADA), an independent institution behind the implementation of the World Anti-Doping Code (Code). The intent of the Code is to protect clean athletes through the harmonization of anti-doping programs at the international level with special attention to detection, deterrence and prevention of doping.1 A new version of the Code came into force on January 1st 2015, introducing, among other improvements, longer periods of sanctioning for athletes (up to four years) and measures to strengthen the role of anti-doping investigations and intelligence. To ensure optimal harmonization, five International Standards covering different technical aspects of the Code are also currently in force: the List of Prohibited Substances and Methods (List), Testing and Investigations, Laboratories, Therapeutic Use Exemptions (TUE) and Protection of Privacy and Personal Information. Adherence to these standards is mandatory for all anti-doping stakeholders to be compliant with the Code. Among these documents, the eighth version of International Standard for Laboratories (ISL), which also came into effect on January 1st 2015, includes regulations for WADA and ISO/IEC 17025 accreditations and their application for urine and blood sample analysis by anti-doping laboratories.2 Specific requirements are also described in several Technical Documents or Guidelines in which various topics are highlighted such as the identification criteria for gas chromatography (GC) and liquid chromatography (LC) coupled to mass spectrometry (MS) techniques (IDCR), measurements and reporting of endogenous androgenic anabolic agents (EAAS) and analytical requirements for the Athlete Biological Passport (ABP).